Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Experimental Investigation of Energy-Efficient Digital Circuits Based on eSFQ Logic

Mark H. Volkmann, Anubhav Sahu, Coenrad Johann Fourie, Oleg A. Mukhanov

Published Jan 16, 2013• 30 citations
Publisher

Abstract

We present the design and results of experimental verification methods for ultra-low-power digital circuits based on the recently introduced energy-efficient single flux quantum (eSFQ) logic. Similar to another low-power SFQ logic, ERSFQ, eSFQ circuits make use of superconducting dc bias current dividers and thus avoid static power dissipation. As a result, per-gate power dissipation is reduced by two orders of magnitude as compared to conventional rapid single flux quantum and static power dissipation is zero. The eSFQ circuits are fabricated using the HYPRES standard 4.5 kA/cm2process. We integrate a low-pass analog-to-digital modulator with our eSFQ deserializer to enable testing at high speed. In this paper, we demonstrate the viability and performance metrics of eSFQ circuits through functional and high-speed tests. Specifically, we confirmed correct operation and present measured parameter margins.

DOI
10.1109/tasc.2013.2240755

Related papers

Implementation of energy efficient single flux quantum digital circuits with sub-aJ/bit operation

Mark H. Volkmann, Anubhav Sahu, Coenrad Johann Fourie +1 more

We report the first experimental demonstration of recently proposed energy efficient single flux quantum logic, eSFQ. This logic can represent the next generation of RSFQ logic, eliminating the dominant static power dissipation associated with a dc bias current distribution and providing over two orders of magnitude efficiency improvement over conventional RSFQ logic. We further demonstrate that the introduction of passive phase shifters allows the reduction of dynamic power dissipation by about 20%, reaching ∼0.8 aJ/bit operation. Two types of demonstration eSFQ circuit, shift registers and demultiplexers (deserializers), were implemented using the standard HYPRES 4.5 kA cm −2 fabrication process. In this paper, we present eSFQ circuit design and demonstrate the viability and performance metrics of eSFQ circuits through simulations and experimental testing.

arXiv:1209.6383•Superconductor Science and Technology•Nov 8, 2012•154 citations

Low-Power Digital Gates in ERSFQ and nSQUID Technology

M. Lucci, Jie Ren, Saad M. Sarwana +4 more

We designed and tested low-power digital gates based on the energy-efficient rapid single flux quantum (ERSFQ) and on the reversible nSQUID logic. The ERSFQ circuit consists of a series of 13 toggle flip-flops (TFFs), where the bias resistors are replaced by inductors which generate no energy dissipation in the static mode, resulting in a power consumption orders of magnitude below that of traditional RSFQ circuits during operation. The ERSFQ circuits were fabricated with HYPRES' standard 4.5-kA/cm2process and tested up to 20 GHz. The RF input level was about -25 dBm 50 Ω matched, and the output level was 400 μVpp. The nSQUID ring with “NOT” gates was fabricated with HYPRES' standard 1-kA/cm2process. The “0” and “1” input logic signals were realized injecting ±5 mA of current in a superconductive coil, obtaining 6 μVpp of amplitude as output signal. The test was performed at low frequency in order to verify the functionality and the ultralow power consumption.

IEEE Transactions on Applied Superconductivity•Feb 26, 2016•10 citations

Operation of practical eSFQ circuits

Mark H. Volkmann, Anubhav Sahu, Andriy V. Dotsenko +1 more

We have designed and tested energy-efficient single flux quantum (eSFQ) circuits for use in practical circuits. The first circuit is a 184-bit shift register for acquisition memory to store short transient events. The second circuit is a 16-bit deserializer integrated with an analog-to-digital converter modulator. The deserializer converts a high speed oversampling delta modulator 1-bit data stream into 16 parallel digital outputs at 1/16 of input data rate. In this work, we report preliminary functional and high-speed operation of some of these eSFQ circuits including their margins of operation at different clock speeds, maximum operation frequencies, and power dissipation.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•6 citations

Wave-Pipelined eSFQ Circuits

Mark H. Volkmann, I. V. Vernik, Oleg A. Mukhanov

We have designed and tested energy-efficient single flux quantum (eSFQ) circuits suitable for wave-pipelined architectures. The high energy-efficiency of eSFQ circuits combined with the sequential nature of SFQ logic makes eSFQ especially suitable for energy-efficient variants of highly-pipelined circuits such as modern arithmetic logic units (ALUs), without penalty to the clock speeds available to RSFQ logic. In previous work, we have demonstrated working eSFQ circuits in the form of shift registers, deserializers, counters. Here we expand on this work by introducing a means of moving data through eSFQ circuits without the need for buffering at every step, resembling the wave-pipelined architecture characterizing many large modern logic circuits. Specifically, we present a pipeline-friendly JTL, confluence buffer, and half adder, comprising the core components of many adder architectures. We also show how such an eSFQ full adder naturally lends itself to utilization in a computation pipeline. We report experimental demonstration of circuits manufactured in Hypres's 4.5 kA/cm2process.

IEEE Transactions on Applied Superconductivity•Dec 9, 2014•19 citations

Energy-Efficient Single Flux Quantum Technology

Oleg A. Mukhanov

Figures of merit connecting processing capabilities with power dissipated (OpS/Watt, Joule/bit, etc.) are becoming dominant factors in choosing technologies for implementing the next generation of computing and communication network systems. Superconductivity is viewed as a technology capable of achieving higher energy efficiencies than other technologies. Static power dissipation of standard RSFQ logic, associated with dc bias resistors, is responsible for most of the circuit power dissipation. In this paper, we review and compare different superconductor digital technology approaches and logic families addressing this problem. We present a novel energy-efficient single flux quantum logic family, ERSFQ/eSFQ. We also discuss energy-efficient approaches for output data interface and overall cryosystem design.

IEEE Transactions on Applied Superconductivity•Jan 7, 2011•543 citations

Design and test of asynchronous eSFQ circuits

I. V. Vernik, Steven B. Kaplan, Mark H. Volkmann +3 more

We designed and tested new energy-efficient single flux quantum (eSFQ) circuits. The eSFQ design approach is based on biasing logic gates via decision-making pairs (DMPs) which connect clock lines to synchronous gates. The eSFQ design of asynchronous gates is more challenging, since these gates are not clocked. We demonstrate eSFQ designs of asynchronous circuits and implemented two versions of eSFQ toggle flip-flops (eTFF) cells embedded in a synchronous shift register environment. The first design is based on the bias-free version of a TFF operating in the ballistic mode. In the second design, the TFFs dc bias is applied symmetrically, while the necessary half-quantum phase skew is achieved by magnetic flux bias, which can also be done with a pi-junction phase shifter. Surrounding shift registers are the eSFQ versions of the RSFQ shift register with two junctions per bit. In this work, we report the functional operation of these eSFQ circuits and their energy consumption.

Superconductor Science and Technology•Mar 18, 2014•23 citations
We present the design and results of experimental verification methods for ultra-low-power digital circuits based on the recently introduced energy-efficient single flux quantum (eSFQ) logic. Similar to another low-power SFQ logic, ERSFQ, eSFQ circuits make use of superconducting dc bias current dividers and thus avoid static power dissipation. As a result, per-gate power dissipation is reduced by two orders of magnitude as compared to conventional rapid single flux quantum and static power dissipation is zero. The eSFQ circuits are fabricated using the HYPRES standard 4.5 kA/cm2process. We integrate a low-pass analog-to-digital modulator with our eSFQ deserializer to enable testing at high speed. In this paper, we demonstrate the viability and performance metrics of eSFQ circuits through functional and high-speed tests. Specifically, we confirmed correct operation and present measured parameter margins.
We report the first experimental demonstration of recently proposed energy efficient single flux quantum logic, eSFQ. This logic can represent the next generation of RSFQ logic, eliminating the dominant static power dissipation associated with a dc bias current distribution and providing over two orders of magnitude efficiency improvement over conventional RSFQ logic. We further demonstrate that the introduction of passive phase shifters allows the reduction of dynamic power dissipation by about 20%, reaching ∼0.8 aJ/bit operation. Two types of demonstration eSFQ circuit, shift registers and demultiplexers (deserializers), were implemented using the standard HYPRES 4.5 kA cm −2 fabrication process. In this paper, we present eSFQ circuit design and demonstrate the viability and performance metrics of eSFQ circuits through simulations and experimental testing.
We designed and tested low-power digital gates based on the energy-efficient rapid single flux quantum (ERSFQ) and on the reversible nSQUID logic. The ERSFQ circuit consists of a series of 13 toggle flip-flops (TFFs), where the bias resistors are replaced by inductors which generate no energy dissipation in the static mode, resulting in a power consumption orders of magnitude below that of traditional RSFQ circuits during operation. The ERSFQ circuits were fabricated with HYPRES' standard 4.5-kA/cm2process and tested up to 20 GHz. The RF input level was about -25 dBm 50 Ω matched, and the output level was 400 μVpp. The nSQUID ring with “NOT” gates was fabricated with HYPRES' standard 1-kA/cm2process. The “0” and “1” input logic signals were realized injecting ±5 mA of current in a superconductive coil, obtaining 6 μVpp of amplitude as output signal. The test was performed at low frequency in order to verify the functionality and the ultralow power consumption.
We have designed and tested energy-efficient single flux quantum (eSFQ) circuits for use in practical circuits. The first circuit is a 184-bit shift register for acquisition memory to store short transient events. The second circuit is a 16-bit deserializer integrated with an analog-to-digital converter modulator. The deserializer converts a high speed oversampling delta modulator 1-bit data stream into 16 parallel digital outputs at 1/16 of input data rate. In this work, we report preliminary functional and high-speed operation of some of these eSFQ circuits including their margins of operation at different clock speeds, maximum operation frequencies, and power dissipation.
We have designed and tested energy-efficient single flux quantum (eSFQ) circuits suitable for wave-pipelined architectures. The high energy-efficiency of eSFQ circuits combined with the sequential nature of SFQ logic makes eSFQ especially suitable for energy-efficient variants of highly-pipelined circuits such as modern arithmetic logic units (ALUs), without penalty to the clock speeds available to RSFQ logic. In previous work, we have demonstrated working eSFQ circuits in the form of shift registers, deserializers, counters. Here we expand on this work by introducing a means of moving data through eSFQ circuits without the need for buffering at every step, resembling the wave-pipelined architecture characterizing many large modern logic circuits. Specifically, we present a pipeline-friendly JTL, confluence buffer, and half adder, comprising the core components of many adder architectures. We also show how such an eSFQ full adder naturally lends itself to utilization in a computation pipeline. We report experimental demonstration of circuits manufactured in Hypres's 4.5 kA/cm2process.
Figures of merit connecting processing capabilities with power dissipated (OpS/Watt, Joule/bit, etc.) are becoming dominant factors in choosing technologies for implementing the next generation of computing and communication network systems. Superconductivity is viewed as a technology capable of achieving higher energy efficiencies than other technologies. Static power dissipation of standard RSFQ logic, associated with dc bias resistors, is responsible for most of the circuit power dissipation. In this paper, we review and compare different superconductor digital technology approaches and logic families addressing this problem. We present a novel energy-efficient single flux quantum logic family, ERSFQ/eSFQ. We also discuss energy-efficient approaches for output data interface and overall cryosystem design.
We designed and tested new energy-efficient single flux quantum (eSFQ) circuits. The eSFQ design approach is based on biasing logic gates via decision-making pairs (DMPs) which connect clock lines to synchronous gates. The eSFQ design of asynchronous gates is more challenging, since these gates are not clocked. We demonstrate eSFQ designs of asynchronous circuits and implemented two versions of eSFQ toggle flip-flops (eTFF) cells embedded in a synchronous shift register environment. The first design is based on the bias-free version of a TFF operating in the ballistic mode. In the second design, the TFFs dc bias is applied symmetrically, while the necessary half-quantum phase skew is achieved by magnetic flux bias, which can also be done with a pi-junction phase shifter. Surrounding shift registers are the eSFQ versions of the RSFQ shift register with two junctions per bit. In this work, we report the functional operation of these eSFQ circuits and their energy consumption.