Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Energy-Efficient Single Flux Quantum Technology

Oleg A. Mukhanov

Published Jan 7, 2011• 543 citations
Publisher

Abstract

Figures of merit connecting processing capabilities with power dissipated (OpS/Watt, Joule/bit, etc.) are becoming dominant factors in choosing technologies for implementing the next generation of computing and communication network systems. Superconductivity is viewed as a technology capable of achieving higher energy efficiencies than other technologies. Static power dissipation of standard RSFQ logic, associated with dc bias resistors, is responsible for most of the circuit power dissipation. In this paper, we review and compare different superconductor digital technology approaches and logic families addressing this problem. We present a novel energy-efficient single flux quantum logic family, ERSFQ/eSFQ. We also discuss energy-efficient approaches for output data interface and overall cryosystem design.

DOI
10.1109/tasc.2010.2096792

Related papers

Experimental Investigation of Energy-Efficient Digital Circuits Based on eSFQ Logic

Mark H. Volkmann, Anubhav Sahu, Coenrad Johann Fourie +1 more

We present the design and results of experimental verification methods for ultra-low-power digital circuits based on the recently introduced energy-efficient single flux quantum (eSFQ) logic. Similar to another low-power SFQ logic, ERSFQ, eSFQ circuits make use of superconducting dc bias current dividers and thus avoid static power dissipation. As a result, per-gate power dissipation is reduced by two orders of magnitude as compared to conventional rapid single flux quantum and static power dissipation is zero. The eSFQ circuits are fabricated using the HYPRES standard 4.5 kA/cm2process. We integrate a low-pass analog-to-digital modulator with our eSFQ deserializer to enable testing at high speed. In this paper, we demonstrate the viability and performance metrics of eSFQ circuits through functional and high-speed tests. Specifically, we confirmed correct operation and present measured parameter margins.

IEEE Transactions on Applied Superconductivity•Jan 16, 2013•30 citations

Implementation of energy efficient single flux quantum digital circuits with sub-aJ/bit operation

Mark H. Volkmann, Anubhav Sahu, Coenrad Johann Fourie +1 more

We report the first experimental demonstration of recently proposed energy efficient single flux quantum logic, eSFQ. This logic can represent the next generation of RSFQ logic, eliminating the dominant static power dissipation associated with a dc bias current distribution and providing over two orders of magnitude efficiency improvement over conventional RSFQ logic. We further demonstrate that the introduction of passive phase shifters allows the reduction of dynamic power dissipation by about 20%, reaching ∼0.8 aJ/bit operation. Two types of demonstration eSFQ circuit, shift registers and demultiplexers (deserializers), were implemented using the standard HYPRES 4.5 kA cm −2 fabrication process. In this paper, we present eSFQ circuit design and demonstrate the viability and performance metrics of eSFQ circuits through simulations and experimental testing.

arXiv:1209.6383•Superconductor Science and Technology•Nov 8, 2012•154 citations

Research on the Bias Network of Energy-Efficient Single Flux Quantum Circuits

Guanqun Li, Jie Ren, Yu Wu +4 more

Superconducting single flux quantum (SFQ) circuits have been shown to offer huge advantages that are ideal for high performance computing applications. These circuits can operate at very high frequencies (tens of GHz) but consume very low power (from nanowatts to microwatts per gate). Energy-efficient SFQ (ERSFQ) circuits, evolved from traditional rapid SFQ (RSFQ) circuits, were invented with the goal of elimination of static power dissipation. When compared with RSFQ circuits, ERSFQ circuits require a new biasing network that includes biasing Josephson junction(s), biasing inductor(s), and feeding Josephson transmission line(s). Some general suggestions on how to design the network have been offered, but a detailed analysis and optimization scenario for the network is still to be provided. In this paper, we first optimize the previously reported DC-biased two-Josephson junction per bit RSFQ shift register circuit, which can be used to provide a more robust, energy-efficient, and high memory capacity storage unit. The simulated power dissipation of 16-bit RSFQ shift register is 0.45 μW per bit when operating at 21.7 GHz. We then convert the RSFQ-based shift register into an ERSFQ structure and investigate the effects of the ERSFQ bias network on the margins of the ERSFQ circuit. Finally, we propose a more comprehensive optimization method for the ERSFQ biasing network.

IEEE Transactions on Applied Superconductivity•May 2, 2019•11 citations

Simulation Analysis and Energy-Saving Techniques for ERSFQ Circuits

Naveen Kumar Katam, Oleg A. Mukhanov, Massoud Pedram

Energy-efficient rapid single flux quantum (ERSFQ) circuits have become a viable alternative for the implementation of superconducting circuits due to a large amount of static power consumption in RSFQ circuits. ERSFQ circuits are built upon the popular RSFQ logic circuits by replacing the power-dissipating resistor bias network with a bias network consisting of active devices. In this paper, a simulation study of ERSFQ biasing scheme is carried out by building simulation test benches for both synchronous and asynchronous ERSFQ circuits. A study is carried out to present the optimum value of biasing inductance, influence of the feeding Josephson transmission line (FJTL) and the effect of its size, the effect of the feeding clock frequency, and the effect of the circuit operating frequency. An innovative clock-choking mechanism using magnetic Josephson junctions is also proposed for the FJTL in the case of no logic circuit activity for a current-recycling circuit block, which would help in eliminating the dynamic power consumed due to the switching of bias junctions in a logic circuit. Simulation results for current recycling ERSFQ circuits are presented along with a strategy for implementing large superconducting circuits.

IEEE Transactions on Applied Superconductivity•Mar 18, 2019•23 citations

Challenges and the status of superconducting single flux quantum technology

Naveen Kumar Katam, Jamil Kawa, Massoud Pedram

Design and manufacturing of superconductive electronics have been evolving over the past three decades with significant progress made in related fields. Rapid single flux quantum (RSFQ) logic circuits have become popular among superconductive logic families and its energy-efficient variants (ERSFQ and eSFQ) have shown promise as an ultra lowpower and high-speed circuit fabric. SFQ circuits have been demonstrated at tens of GHz with an energy consumption of an attojoule per gate. There are many differences between SFQ and conventional CMOS circuits. SFQ logic circuits are based on the manipulation of the quantized magnetic flux pulses. Most of the logic gates are sequential in nature requiring the clock to be distributed to every logic gate. SFQ logic gates have no gain and hence splitters are needed to drive multiple fanouts. Design and successful demonstration of a controllable superconducting switch and a compact reliable memory element have evaded researchers so far. This paper starts by describing key differences between SFQ logic and conventional CMOS and concludes by listing key challenges that must be overcome to achieve the very large scale integration of SFQ circuits and make the demonstration of a superconductive CPU a reality.

Design, Automation, and Test in Europe•Mar 1, 2019•11 citations

Trend and Perspective of Microprocessors Based on Single-flux-quantum Logic

Masamitsu Tanaka, Akira Fujimaki, Koji Inoue

The recent trend and perspectives for high-performance microprocessors based on superconductor single-fluxquantum (SFQ) logic families are described. The rapid single-flux-quantum (RSFQ) and its energy-efficient derivatives are promising as a next-generation digital circuit technology for very-large-scale integration in the post-Moore's era because of the capability of ultrahigh-frequency operation over 100 GHz and low energy consumption. Several ongoing research projects as well as results reported, including several demonstrations of SFQ-based microprocessors and their components, are reviewed.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Jan 1, 2017•0 citations
Figures of merit connecting processing capabilities with power dissipated (OpS/Watt, Joule/bit, etc.) are becoming dominant factors in choosing technologies for implementing the next generation of computing and communication network systems. Superconductivity is viewed as a technology capable of achieving higher energy efficiencies than other technologies. Static power dissipation of standard RSFQ logic, associated with dc bias resistors, is responsible for most of the circuit power dissipation. In this paper, we review and compare different superconductor digital technology approaches and logic families addressing this problem. We present a novel energy-efficient single flux quantum logic family, ERSFQ/eSFQ. We also discuss energy-efficient approaches for output data interface and overall cryosystem design.
We present the design and results of experimental verification methods for ultra-low-power digital circuits based on the recently introduced energy-efficient single flux quantum (eSFQ) logic. Similar to another low-power SFQ logic, ERSFQ, eSFQ circuits make use of superconducting dc bias current dividers and thus avoid static power dissipation. As a result, per-gate power dissipation is reduced by two orders of magnitude as compared to conventional rapid single flux quantum and static power dissipation is zero. The eSFQ circuits are fabricated using the HYPRES standard 4.5 kA/cm2process. We integrate a low-pass analog-to-digital modulator with our eSFQ deserializer to enable testing at high speed. In this paper, we demonstrate the viability and performance metrics of eSFQ circuits through functional and high-speed tests. Specifically, we confirmed correct operation and present measured parameter margins.
We report the first experimental demonstration of recently proposed energy efficient single flux quantum logic, eSFQ. This logic can represent the next generation of RSFQ logic, eliminating the dominant static power dissipation associated with a dc bias current distribution and providing over two orders of magnitude efficiency improvement over conventional RSFQ logic. We further demonstrate that the introduction of passive phase shifters allows the reduction of dynamic power dissipation by about 20%, reaching ∼0.8 aJ/bit operation. Two types of demonstration eSFQ circuit, shift registers and demultiplexers (deserializers), were implemented using the standard HYPRES 4.5 kA cm −2 fabrication process. In this paper, we present eSFQ circuit design and demonstrate the viability and performance metrics of eSFQ circuits through simulations and experimental testing.
Superconducting single flux quantum (SFQ) circuits have been shown to offer huge advantages that are ideal for high performance computing applications. These circuits can operate at very high frequencies (tens of GHz) but consume very low power (from nanowatts to microwatts per gate). Energy-efficient SFQ (ERSFQ) circuits, evolved from traditional rapid SFQ (RSFQ) circuits, were invented with the goal of elimination of static power dissipation. When compared with RSFQ circuits, ERSFQ circuits require a new biasing network that includes biasing Josephson junction(s), biasing inductor(s), and feeding Josephson transmission line(s). Some general suggestions on how to design the network have been offered, but a detailed analysis and optimization scenario for the network is still to be provided. In this paper, we first optimize the previously reported DC-biased two-Josephson junction per bit RSFQ shift register circuit, which can be used to provide a more robust, energy-efficient, and high memory capacity storage unit. The simulated power dissipation of 16-bit RSFQ shift register is 0.45 μW per bit when operating at 21.7 GHz. We then convert the RSFQ-based shift register into an ERSFQ structure and investigate the effects of the ERSFQ bias network on the margins of the ERSFQ circuit. Finally, we propose a more comprehensive optimization method for the ERSFQ biasing network.
Energy-efficient rapid single flux quantum (ERSFQ) circuits have become a viable alternative for the implementation of superconducting circuits due to a large amount of static power consumption in RSFQ circuits. ERSFQ circuits are built upon the popular RSFQ logic circuits by replacing the power-dissipating resistor bias network with a bias network consisting of active devices. In this paper, a simulation study of ERSFQ biasing scheme is carried out by building simulation test benches for both synchronous and asynchronous ERSFQ circuits. A study is carried out to present the optimum value of biasing inductance, influence of the feeding Josephson transmission line (FJTL) and the effect of its size, the effect of the feeding clock frequency, and the effect of the circuit operating frequency. An innovative clock-choking mechanism using magnetic Josephson junctions is also proposed for the FJTL in the case of no logic circuit activity for a current-recycling circuit block, which would help in eliminating the dynamic power consumed due to the switching of bias junctions in a logic circuit. Simulation results for current recycling ERSFQ circuits are presented along with a strategy for implementing large superconducting circuits.
Design and manufacturing of superconductive electronics have been evolving over the past three decades with significant progress made in related fields. Rapid single flux quantum (RSFQ) logic circuits have become popular among superconductive logic families and its energy-efficient variants (ERSFQ and eSFQ) have shown promise as an ultra lowpower and high-speed circuit fabric. SFQ circuits have been demonstrated at tens of GHz with an energy consumption of an attojoule per gate. There are many differences between SFQ and conventional CMOS circuits. SFQ logic circuits are based on the manipulation of the quantized magnetic flux pulses. Most of the logic gates are sequential in nature requiring the clock to be distributed to every logic gate. SFQ logic gates have no gain and hence splitters are needed to drive multiple fanouts. Design and successful demonstration of a controllable superconducting switch and a compact reliable memory element have evaded researchers so far. This paper starts by describing key differences between SFQ logic and conventional CMOS and concludes by listing key challenges that must be overcome to achieve the very large scale integration of SFQ circuits and make the demonstration of a superconductive CPU a reality.
The recent trend and perspectives for high-performance microprocessors based on superconductor single-fluxquantum (SFQ) logic families are described. The rapid single-flux-quantum (RSFQ) and its energy-efficient derivatives are promising as a next-generation digital circuit technology for very-large-scale integration in the post-Moore's era because of the capability of ultrahigh-frequency operation over 100 GHz and low energy consumption. Several ongoing research projects as well as results reported, including several demonstrations of SFQ-based microprocessors and their components, are reviewed.