Applied Physics Letters

Enhancement in microwave modulation efficiency of vertical cavity surface-emitting laser by optical feedback

Nemi Gavra, Valentina R. Ruseva, M. Rosenbluh

Published Jun 2, 2008• 11 citations

Abstract

We investigate a versatile vertical cavity surface-emitting laser (VCSEL) with a slight optical feedback from a simple wedge positioned at a well determined distance from the VCSEL. We use such a laser in conjunction with a miniature Rb atomic cell to detect coherent population trapping (CPT) when the external cavity mode spacing frequency corresponds to half the hyperfine frequency of Rb. The feedback greatly enhances the rf modulation efficiency of the VCSEL and as a result we obtain high contrast CPT signals at an input of −16dBm of rf modulation power compared to +1.25dBm needed in the absence of the external cavity.

DOI: 10.1063/1.2940231

Related papers

Dual microwave frequency modulation of the VCSEL injection current for a CPT-based atomic clock

Maria I. Vaskovskaya, Dmitry S. Chuchelov, Eugene A. Tsygankov +3 more

Previously, we have proposed a method to control the emission spectrum of the vertical-cavity surface-emitting laser (VCSEL) with the synchronized modulation of the injection current at single and doubled frequencies. In this work, the above method is used to improve the metrological characteristics of the coherent population trapping (CPT) resonance in 87 Rb. The dual-frequency (DF) modulation reduces the carrier power and suppresses the light shift of the resonance frequency, if it is unattainable with the single-frequency modulation. In addition, a higher resonance contrast is achieved by equalizing the powers of the resonant components of the spectrum.

Optics LettersJul 31, 20245 citations

VCSELs for atomic clocks

Darwin K. Serkland, Gregory M. Peake, K.M. Geib +4 more

The spectroscopic technique of coherent population trapping (CPT) enables an all-optical interrogation of the groundstate hyperfine splitting of cesium (or rubidium), compared to the optical-microwave double resonance technique conventionally employed in atomic frequency standards. All-optical interrogation enables the reduction of the size and power consumption of an atomic clock by two orders of magnitude, and vertical-cavity surface-emitting lasers (VCSELs) are preferred optical sources due to their low power consumption and circular output beam. Several research teams are currently using VCSELs for DARPA's chip-scale atomic clock (CSAC) program with the goal of producing an atomic clock having a volume < 1 cm^3, a power consumption < 30 mW, and an instability (Allan deviation) < 1x10^-11 during a 1-hour averaging interval. This paper describes the VCSEL requirements for CPT-based atomic clocks, which include single mode operation, single polarization operation, modulation bandwidth > 4 GHz, low power consumption (for the CSAC), narrow linewidth, and low relative intensity noise (RIN). A significant manufacturing challenge is to reproducibly obtain the required wavelength at the specified VCSEL operating temperature and drive current. Data are presented that show the advantage of operating at the D1 (rather than D2) resonance of the alkali atoms. Measurements of VCSEL linewidth will be discussed in particular, since atomic clock performance is especially sensitive to this parameter.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIEFeb 9, 200660 citations

External Cavity Laser for Chip-Scale Atomic Clock

Jie Miao, Jiqing Lian, Tianyu Liu +2 more

In this paper we report a new coherent population trapping (CPT) atomic clock based on external cavity laser. Unlike usual CPT atomic clocks, where used the vertical cavity surface emitting laser (VCSEL), we combine the external cavity laser (ECL) with CPT atomic clock to improve the stability. Compared with VCSEL, the ECL has higher laser power of 10 mW and narrower linewidth of 0.8 MHz, meaning that the signal-to-noise ratio of clock can be further improved.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)May 15, 20231 citation

Performance of a prototype atomic clock based on lin‖lin coherent population trapping resonances in Rb atomic vapor

Eugeniy E. Mikhailov, Travis Horrom, Nathan Belcher +1 more

We report on the performance of the first table-top prototype atomic clock based on coherent population trapping (CPT) resonances with parallel linearly polarized optical fields (lin‖lin configuration). Our apparatus uses a vertical-cavity surface-emitting laser (VCSEL) tuned to the D1 line of 87Rb with the current modulation at the 87Rb hyperfine frequency. We demonstrate cancellation of the first-order light shift by the proper choice of rf modulation power and further improve our prototype clock stability by optimizing the parameters of the microwave lock loop. Operating in these optimal conditions, we measured a short-term fractional frequency stability (Allan deviation) 2×10−11τ−1/2 for observation times 1 s ≤ τ ≤ 20 s. This value is limited by large VCSEL phase noise and environmental temperature fluctuation. Further improvements in frequency stability should be possible with an apparatus designed as a dedicated lin‖lin CPT resonance clock with environmental impacts minimized.

arXiv:0910.5881Journal of the Optical Society of America BFeb 3, 201053 citations

Constructive interference atomic clock scheme based on coherent population trapping and an extended optical cavity

Suping Qu, De-Huan Cai

We studied experimentally a left-right circularly polarized light feedback scheme. A vertical-cavity surface-emitting laser (VCSEL) and partial retroreflector formed an extended cavity, allowing ∼4% of the laser to enter the VCSEL. Such design helped to improve the microwave modulation efficiency. Comparing to the conventional circularly polarized light scheme, the resonance amplitude of this method was doubled while the noise was reduced five times because of the usage of the left-right circularly polarized light, which continuously interacted with atoms. The short-term instability was improved by one order of magnitude. This scheme can be applied to small or chip-scale atomic clocks.

OSA ContinuumJun 5, 20200 citations

CPT chip-scale atomic clock with direct-modulation chip-external cavity diode laser

Jiqing Lian, Jie Miao, Tian Zhao +7 more

Chip-scale atomic clocks are critical for applications requiring compact, energy-efficient, and highly stable timing, such as GPS receivers and communication systems. Coherent population trapping (CPT)-based atomic clocks, which commonly use vertical-cavity surface-emitting lasers (VCSELs), have enabled significant miniaturization. However, their precision is limited by the broad linewidth of VCSELs. Alternative laser technologies, such as distributed Bragg reflector lasers, distributed feedback lasers, and external cavity diode lasers (ECDLs), offer potential improvements but face challenges in achieving compact size and adequate modulation bandwidth. This study presents a 795 nm chip-ECDL with a direct modulation bandwidth up to 4 GHz, specifically designed for CPT chip-scale atomic clocks. Based on the chip-ECDL, a CPT atomic clock with a compact volume of 19.4 ml and power consumption of 1.5 W has been developed. Under identical operating conditions, the CPT signal produced by the chip-ECDL exhibits a 34% reduction in linewidth and a 1.14-fold increase in contrast compared to a VCSEL-based clock. Demonstrating short-term stability better than 5×10−11τ−1/2(1 s<τ<2000 s) and reaching a best stability of 6.6×10−13 at 2000 s, this work represents the application of an ECDL in a CPT chip-scale clock, advancing the development of next-generation, high-performance chip-scale atomic clocks.

Applied Physics LettersJun 2, 20259 citations