© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Applied Physics Letters

CPT chip-scale atomic clock with direct-modulation chip-external cavity diode laser

Jiqing Lian, Jie Miao, Tian Zhao, Xiaobo Xue, Xiaoqi Zhu, Lina Bai, Jiang Chen, Zhidong Liu, Duo Pan, Jingbiao Chen

Published Jun 2, 2025• 9 citations

Abstract

Chip-scale atomic clocks are critical for applications requiring compact, energy-efficient, and highly stable timing, such as GPS receivers and communication systems. Coherent population trapping (CPT)-based atomic clocks, which commonly use vertical-cavity surface-emitting lasers (VCSELs), have enabled significant miniaturization. However, their precision is limited by the broad linewidth of VCSELs. Alternative laser technologies, such as distributed Bragg reflector lasers, distributed feedback lasers, and external cavity diode lasers (ECDLs), offer potential improvements but face challenges in achieving compact size and adequate modulation bandwidth. This study presents a 795 nm chip-ECDL with a direct modulation bandwidth up to 4 GHz, specifically designed for CPT chip-scale atomic clocks. Based on the chip-ECDL, a CPT atomic clock with a compact volume of 19.4 ml and power consumption of 1.5 W has been developed. Under identical operating conditions, the CPT signal produced by the chip-ECDL exhibits a 34% reduction in linewidth and a 1.14-fold increase in contrast compared to a VCSEL-based clock. Demonstrating short-term stability better than 5×10−11τ−1/2(1 s<τ<2000 s) and reaching a best stability of 6.6×10−13 at 2000 s, this work represents the application of an ECDL in a CPT chip-scale clock, advancing the development of next-generation, high-performance chip-scale atomic clocks.

DOI: 10.1063/5.0254386

Related papers

Coherent Population Trapped Spectrum Based on Chip-Scale External Cavity Diode Laser

Tian Zhao, Jiqing Lian, S.K. Wu +5 more

This article reports a scheme for obtaining coherent population trapping (CPT) spectrum based on a chip-scale external cavity diode laser (CECDL). The CPT spectrum linewidth is 680Hz. Compared to the scheme using vertical cavity surface emitting laser (VCSEL), CECDL has a comparable small volume and higher laser power of 14mW and narrower linewidth of 270kHz. This is beneficial for improving the frequency stability performance of CPT chip-scale atomic clocks.

European Frequency and Time Forum•Jun 25, 2024•1 citation

VCSELs for atomic clocks

Darwin K. Serkland, Gregory M. Peake, K.M. Geib +4 more

The spectroscopic technique of coherent population trapping (CPT) enables an all-optical interrogation of the groundstate hyperfine splitting of cesium (or rubidium), compared to the optical-microwave double resonance technique conventionally employed in atomic frequency standards. All-optical interrogation enables the reduction of the size and power consumption of an atomic clock by two orders of magnitude, and vertical-cavity surface-emitting lasers (VCSELs) are preferred optical sources due to their low power consumption and circular output beam. Several research teams are currently using VCSELs for DARPA's chip-scale atomic clock (CSAC) program with the goal of producing an atomic clock having a volume < 1 cm^3, a power consumption < 30 mW, and an instability (Allan deviation) < 1x10^-11 during a 1-hour averaging interval. This paper describes the VCSEL requirements for CPT-based atomic clocks, which include single mode operation, single polarization operation, modulation bandwidth > 4 GHz, low power consumption (for the CSAC), narrow linewidth, and low relative intensity noise (RIN). A significant manufacturing challenge is to reproducibly obtain the required wavelength at the specified VCSEL operating temperature and drive current. Data are presented that show the advantage of operating at the D1 (rather than D2) resonance of the alkali atoms. Measurements of VCSEL linewidth will be discussed in particular, since atomic clock performance is especially sensitive to this parameter.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Feb 9, 2006•60 citations

External Cavity Laser for Chip-Scale Atomic Clock

Jie Miao, Jiqing Lian, Tianyu Liu +2 more

In this paper we report a new coherent population trapping (CPT) atomic clock based on external cavity laser. Unlike usual CPT atomic clocks, where used the vertical cavity surface emitting laser (VCSEL), we combine the external cavity laser (ECL) with CPT atomic clock to improve the stability. Compared with VCSEL, the ECL has higher laser power of 10 mW and narrower linewidth of 0.8 MHz, meaning that the signal-to-noise ratio of clock can be further improved.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 15, 2023•1 citation

High-performance coherent population trapping atomic clock with direct-modulation distributed Bragg reflector laser

Peter Yun, Qinglin Li, Qiang Hao +7 more

Abstract The coherent population trapping (CPT) atomic clock is very promising for use in next-generation spaceborne applications owing to its compactness and high performance. In this paper, we propose and implement a CPT atomic clock based on the direct modulation of a large-modulation-bandwidth and narrow-linewidth distributed Bragg reflector laser, which replaces the usually used external bulk modulator in high-performance CPT clocks. Our method retains the high performance while significantly reducing the clock size. Using this highly compact bichromatic light source and simplest CPT configuration, in which a circularly polarized bichromatic laser interrogates the 87 Rb atom system, a CPT signal of clock transition with a narrow linewidth and high contrast is observed. We then lock the local oscillator frequency to the CPT resonance and demonstrate an encouraging short-term frequency stability of 3.6 × 10 −13 τ −1/2 (4 s ⩽ τ ⩽ 200 s). We attribute it to the ultralow laser frequency and intensity noise as well as to the high-quality-factor CPT signal. This study can pave the way for the development of compact high-performance CPT clocks based on our scheme.

arXiv:2103.00707•Metrologia•May 11, 2021•22 citations

The Chip-Scale Atomic Clock - Recent Development Progress

Robert Lutwak, Donald A. Emmons, Thomas C. English +1 more

We have undertaken the development of a chip-scale atomic clock (CSAC) whose design goals include short-term stability, sigma(sub y)(tau=1 hour), of 1x10(exp 11) with a total power consumption of 30 mW and an overall device volume of 1 cu cm. The stringent power requirement dominates the physics package architecture, dictating a small (<5 mm(exp 3) gaseous atomic ensemble interrogated by a low-power semiconductor laser. At PTTI 2002, we reported on initial experimental investigations leading to the decision to employ the coherent population trapping (CPT) interrogation technique. This paper describes our further progress on the CSAC effort, including the development of custom vertical cavity surface emitting laser (VCSEL) sources and techniques for microfabricating miniature cesium vapor cells comprised of anodically bonded silicon and glass. Measurements of the signal contrast and linewidth of both the cesium D1 and D2 resonance transitions are compared, and frequency stability measurements of the CSAC testbed are presented.

•Sep 1, 2004•55 citations

CPT pulse excitation method based on VCSEL current modulation for miniature atomic clocks

Takumi Ide, Shigeyoshi Goka, Yuichiro Yano

We propose a coherent population trapping (CPT) pulsed-excitation method based on direct drive-current modulation of a vertical-cavity surface-emitting LASER for miniature atomic clocks (MACs). Because our method needs only a simple device configuration without optical external modulators, it is suitable for MACs, including chip-scale atomic-clocks. Reducing the size, cost, and power consumption is also possible. Additionally, we report on experimental results for Ramsey-CPT fringes excited using the proposed method.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Apr 1, 2015•10 citations

Chip-scale atomic clocks are critical for applications requiring compact, energy-efficient, and highly stable timing, such as GPS receivers and communication systems. Coherent population trapping (CPT)-based atomic clocks, which commonly use vertical-cavity surface-emitting lasers (VCSELs), have enabled significant miniaturization. However, their precision is limited by the broad linewidth of VCSELs. Alternative laser technologies, such as distributed Bragg reflector lasers, distributed feedback lasers, and external cavity diode lasers (ECDLs), offer potential improvements but face challenges in achieving compact size and adequate modulation bandwidth. This study presents a 795 nm chip-ECDL with a direct modulation bandwidth up to 4 GHz, specifically designed for CPT chip-scale atomic clocks. Based on the chip-ECDL, a CPT atomic clock with a compact volume of 19.4 ml and power consumption of 1.5 W has been developed. Under identical operating conditions, the CPT signal produced by the chip-ECDL exhibits a 34% reduction in linewidth and a 1.14-fold increase in contrast compared to a VCSEL-based clock. Demonstrating short-term stability better than 5×10−11τ−1/2(1 s<τ<2000 s) and reaching a best stability of 6.6×10−13 at 2000 s, this work represents the application of an ECDL in a CPT chip-scale clock, advancing the development of next-generation, high-performance chip-scale atomic clocks.

The spectroscopic technique of coherent population trapping (CPT) enables an all-optical interrogation of the groundstate hyperfine splitting of cesium (or rubidium), compared to the optical-microwave double resonance technique conventionally employed in atomic frequency standards. All-optical interrogation enables the reduction of the size and power consumption of an atomic clock by two orders of magnitude, and vertical-cavity surface-emitting lasers (VCSELs) are preferred optical sources due to their low power consumption and circular output beam. Several research teams are currently using VCSELs for DARPA's chip-scale atomic clock (CSAC) program with the goal of producing an atomic clock having a volume < 1 cm^3, a power consumption < 30 mW, and an instability (Allan deviation) < 1x10^-11 during a 1-hour averaging interval. This paper describes the VCSEL requirements for CPT-based atomic clocks, which include single mode operation, single polarization operation, modulation bandwidth > 4 GHz, low power consumption (for the CSAC), narrow linewidth, and low relative intensity noise (RIN). A significant manufacturing challenge is to reproducibly obtain the required wavelength at the specified VCSEL operating temperature and drive current. Data are presented that show the advantage of operating at the D1 (rather than D2) resonance of the alkali atoms. Measurements of VCSEL linewidth will be discussed in particular, since atomic clock performance is especially sensitive to this parameter.

Abstract The coherent population trapping (CPT) atomic clock is very promising for use in next-generation spaceborne applications owing to its compactness and high performance. In this paper, we propose and implement a CPT atomic clock based on the direct modulation of a large-modulation-bandwidth and narrow-linewidth distributed Bragg reflector laser, which replaces the usually used external bulk modulator in high-performance CPT clocks. Our method retains the high performance while significantly reducing the clock size. Using this highly compact bichromatic light source and simplest CPT configuration, in which a circularly polarized bichromatic laser interrogates the 87 Rb atom system, a CPT signal of clock transition with a narrow linewidth and high contrast is observed. We then lock the local oscillator frequency to the CPT resonance and demonstrate an encouraging short-term frequency stability of 3.6 × 10 −13 τ −1/2 (4 s ⩽ τ ⩽ 200 s). We attribute it to the ultralow laser frequency and intensity noise as well as to the high-quality-factor CPT signal. This study can pave the way for the development of compact high-performance CPT clocks based on our scheme.

We have undertaken the development of a chip-scale atomic clock (CSAC) whose design goals include short-term stability, sigma(sub y)(tau=1 hour), of 1x10(exp 11) with a total power consumption of 30 mW and an overall device volume of 1 cu cm. The stringent power requirement dominates the physics package architecture, dictating a small (<5 mm(exp 3) gaseous atomic ensemble interrogated by a low-power semiconductor laser. At PTTI 2002, we reported on initial experimental investigations leading to the decision to employ the coherent population trapping (CPT) interrogation technique. This paper describes our further progress on the CSAC effort, including the development of custom vertical cavity surface emitting laser (VCSEL) sources and techniques for microfabricating miniature cesium vapor cells comprised of anodically bonded silicon and glass. Measurements of the signal contrast and linewidth of both the cesium D1 and D2 resonance transitions are compared, and frequency stability measurements of the CSAC testbed are presented.

We propose a coherent population trapping (CPT) pulsed-excitation method based on direct drive-current modulation of a vertical-cavity surface-emitting LASER for miniature atomic clocks (MACs). Because our method needs only a simple device configuration without optical external modulators, it is suitable for MACs, including chip-scale atomic-clocks. Reducing the size, cost, and power consumption is also possible. Additionally, we report on experimental results for Ramsey-CPT fringes excited using the proposed method.