We describe the development of single-flux-quantum (SFQ) microprocessors and the related technologies such as designing, circuit architecture, microarchitecture, etc. Since the microprocessors studied here aim for a general-purpose computing system, we employ the complexity-reduced (CORE) architecture in which the high-speed nature of the SFQ circuits is used not for increasing processor performance but for reducing the circuit complexity. The bit-serial processing is the most suitable way to realize the CORE architecture. We assembled all the best technologies concerning SFQ integrated circuits and designed the SFQ microprocessors, CORE1α, CORE1β, and CORE1γ. The CORE1β was made up of about 11000 Josephson junctions and successfully demonstrated. The peak performance reached 1400 million operations per second with a power consumption of 3.4mW. We showed that the SFQ microprocessors had an advantage in a performance density to semiconductor's ones, which lead to the potential for constructing a high performance SFQ-circuit-based computing system.
We describe the development of single-flux-quantum (SFQ) microprocessors and the related technologies such as designing, circuit architecture, microarchitecture, etc. Since the microprocessors studied here aim for a general-purpose computing system, we employ the complexity-reduced (CORE) architecture in which the high-speed nature of the SFQ circuits is used not for increasing processor performance but for reducing the circuit complexity. The bit-serial processing is the most suitable way to realize the CORE architecture. We assembled all the best technologies concerning SFQ integrated circuits and designed the SFQ microprocessors, CORE1α, CORE1β, and CORE1γ. The CORE1β was made up of about 11000 Josephson junctions and successfully demonstrated. The peak performance reached 1400 million operations per second with a power consumption of 3.4mW. We showed that the SFQ microprocessors had an advantage in a performance density to semiconductor's ones, which lead to the potential for constructing a high performance SFQ-circuit-based computing system.
I describe the fundamental technologies concerning the single flux quantum (SFQ) logic circuits. Recent remarkable progress in the computer-aided-design (CAD) tool, which is based on the cell-based design technique, enables us to make SFQ integrated circuits. Although the circuit demonstrated so far has 2, 300 Josephson junctions at most, this number will increase because the CAD tool is advancing. The on-chip test system has also been developed to test the high-speed nature of the SFQ circuit. For example, the shift-register employed as a circuit under test operates correctly at 55GHz. I also describe the potential applications of the SFQ circuits. An analog-to-digital converter utilizing the high-speed nature and high sensitivity in the SFQ circuits will be applicable to the front end of the future base stations, which require broad band width, high sensitivity, and flexibility. Packet switches used in the future high-end router need high throughput and functionality. Only SFQ-based packet switches can meet these requirements. Another potential application is a high-end server. We have studied micro-architectures of a processor executing the Java Byte Codes directly and a multiprocessor system constructed by connecting the processors and memories via the ultra-broad-band SFQ network switches. Throughout the study, we employ the concept of the complexity-reduction (CORE), in which the high-speed nature of the SFQ circuits is used for the reduction of the circuit scale or simplification of the micro-architecture; the multiprocessor system has high performances. These clear applications promote rapid technological progress in the SFQ technology, though we must make every endeavor to find new application fields.
Design and Implementation of a Pipelined Bit-Serial SFQ Microprocessor, CORE1β
A pipelined 8-bit-serial single-flux-quantum (SFQ) microprocessor, called CORE1beta, was designed and tested. The CORE1beta has two cascaded arithmetic logic units (ALUs) based on forwarding architecture, which can perform two register operations from one instruction. Pipelining is also extensively adopted to enhance the performance. A new design method, known as one-hot encoding, has been introduced into the design of the control circuit. The 4-stage-pipelined SFQ microprocessors, CORE1beta8, have been implemented using the CONNECT cell library and the SRL 2.5 kA/cm2Nb process. The frequency for the instruction fetch is 25 GHz, and 20 GHz for the bit-serial data operation. The peak performance and the power consumption of the CORE1beta8 are estimated to be 1400 MOPS (million instructions per second) and 3.4 mW, respectively. We have experimentally demonstrated 4-stage pipelining and all functionalities of the CORE1beta8 microprocessors by on-chip high-speed tests.
We present a design of an 8-bit bit-serial rapid single-flux-quantum (RSFQ) microprocessor, which is called CORE e4, and its high-speed functionality test results. The CORE e4 is equipped with four general-purpose registers and can execute 20 different instructions. The first version of the CORE e4, which is called CORE e4v1, has been implemented using the National Institute of Advanced Industrial Science and Technology (AIST) 10-kA/cm2advanced process (ADP2) and the CONNECT cell library. The CORE e4v1 consists of approximately 7000 Josephson junctions and occupies a circuit area of 3.00 mm × 1.98 mm. The estimated power consumption and performance are 2.03 mW and 333 million instructions per second, respectively. CORE e4 is one of the highest performing RSFQ microprocessors.
Single flux quantum (SFQ) electronics is extremely fast and has very low on-chip power dissipation. SFQ VLSI is an excellent candidate for high-performance computing and other applications requiring extremely high-speed signal processing. Despite this, SFQ technology has generally not been accepted for system implementation. We argue that this is due, at least in part, to the use of outdated tools to produce SFQ circuits and chips. Assuming the use of tools equivalent to those employed in the semiconductor industry, we estimate the density of Josephson junctions, circuit speed, and power dissipation that could be achieved with SFQ technology. Today, CMOS lithography is at 90?65?nm with about 20 layers. Assuming equivalent technology, aggressively increasing the current density above 100?kA?cm?2 to achieve junction speeds approximately 1000?GHz, and reducing device footprints by converting device profiles from planar to vertical, one could expect to integrate about 250?M Josephson junctions cm?2 into SFQ digital circuits. This should enable circuit operation with clock frequencies above 200?GHz and place approximately 20?K gates within a radius of one clock period. As a result, complete microprocessors, including integrated memory registers, could be fabricated on a single chip.
We have designed a pipelined 8-bit-serial single-flux-quantum microprocessor with multiple ALUs, called CORE1 β. In the CORE1 β, two ALUs connected in cascade enable us to perform two calculations on serial data using a register-to-register instruction, to enhance the peak performance. In addition, we have introduced pipelining to boost the performance. Although the pipelining is a difficult technique that requires a complex design in the datapath, we have implemented a simplified pipeline with seven stages by using two techniques. One is the separation of clock signals for pipelining and bit processing, and the other is the introduction of new buffers driven by independent clock signals for reading and writing flexibly in order to ease the difficulty in timing design between the register file and the ALUs. According to the logic simulation, the peak performance of the designed microprocessor is estimated to be 1500 million operations per second with a power consumption of 3.3 mW. We have fabricated the CORE1 β chip by using the NEC 2.5 kA cm −2 niobium standard process, and confirmed the correct operations of several instructions using high-speed clocks.
We have successfully demonstrated an 8-bit microprocessor using passive transmission lines based on single-flux-quantum LSI technology. In the microprocessor designed here, called CORE1/spl alpha/6, a simple bit-serial architecture with seven instructions was employed. In the CORE1/spl alpha/6, the floor plan was designed with consideration toward integration of a memory, and superconductive passive transmission lines (PTLs) were used to connect circuit blocks. Utilization of PTLs helped us reduce the propagation delay in long interconnections. The design flexibility of the floor plan was enhanced and the performance of the microprocessor was improved by 20% compared with our previous design. The CORE1/spl alpha/6 was composed of 6319 Josephson junctions and 15 PTLs with power consumption of 2.1 mW. We have confirmed the complete operations of the CORE1/spl alpha/6 by on-chip high-speed tests. The maximum clock frequencies for bit operation and instruction execution have been found to be 18 GHz and 1.2 GHz, respectively, where the performance corresponds to 240 million instructions per second (MIPS).