Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)

A microfabricated photonic magnetometer

Jan Preusser, Svenja A. Knappe, Vladislav P. Gerginov, John E. Kitching

Published Jun 1, 2009• 10 citations
Publisher

Abstract

An integrated optically-controlled sensor, suitable for remote, high-sensitivity detection of magnetic fields is presented. The operation of the sensor both in earth field in a Bell-Bloom type configuration is demonstrated as well as in a spin-exchange relaxation-free mode (SERF) and reach sensitivities better than 500 fT/radicHz at 10 Hz. The design and initial measurements of a small atomic magnetometer that has no electrical connections near the sensor head is presented. The sensor is fabricated by use of methods derived from microelectromechanical (MEMS) systems and integrated with off-the-shelf micro-optical components. Light is coupled through fibers to and from the sensor head for interrogation of the atoms. Heating of the atomic vapor is achieved by a second fiber-coupled laser source, utilizing the absorption properties of the vapor cell.

DOI
10.1109/cleoe-eqec.2009.5196308

Related papers

A microfabricated photonic magnetometer

Jan Preusser, Svenja A. Knappe, John E. Kitching +1 more

We present initial measurements of an atomic magnetometer in which the microfabricated sensor head is coupled to the control system by optical fibers. Because there are no electrical connections, the sensor head is largely non-magnetic, and degradation of the magnetometer performance due to internal magnetic fields is avoided. The sensor head is fabricated by use of methods derived from micro-electromechanical (MEMS) systems and integrated with off-the-shelf micro-optical components. Light is coupled through fibers to and from the sensor head for interrogation of the atoms as well as temperature stabilization of the vapor cell.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Apr 1, 2009•20 citations

A microfabricated photonic magnetometer

Jan Preusser, Vladislav P. Gerginov, Svenja A. Knappe +1 more

An integrated optically-controlled sensor, suitable for remote, high-sensitivity detection of magnetic fields, is presented. The sensor head is free of electrical currents or metal parts, which largely eliminates any spurious fields created by the sensor itself. We demonstrate the operation of the sensor by employing a scheme first published by Bell and Bloom and reach a sensitivity of 2.6 pT/Hz1/2at 30 Hz, limited primarily by the photon shot noise of the detector.

Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ...•Oct 1, 2008•16 citations

A low-power, high-sensitivity micromachined optical magnetometer

Rahul R. Mhaskar, Svenja A. Knappe, John E. Kitching

We demonstrate an optical magnetometer based on a microfabricated 87Rb vapor cell in a micromachined silicon sensor head. The alkali atom density in the vapor cell is increased by heating the cell with light brought to the sensor through an optical fiber, and absorbed by colored filters attached to the cell windows. A second fiber-optically coupled beam optically pumps and interrogates the atoms. The magnetometer operates on 140 mW of heating power and achieves a sensitivity below 20 fT/√Hz throughout most of the frequency band from 15 Hz to 100 Hz. Such a sensor can measure magnetic fields from the human heart and brain.

Applied Physics Letters•Dec 10, 2012•172 citations

A microfabricated optically-pumped magnetic gradiometer

D. Sheng, Abigail R. Perry, Sean Krzyzewski +3 more

We report on the development of a microfabricated atomic magnetic gradiometer based on optical spectroscopy of alkali atoms in the vapor phase. The gradiometer, which operates in the spin-exchange relaxation free regime, has a length of 60 mm and cross sectional diameter of 12 mm, and consists of two chip-scale atomic magnetometers which are interrogated by a common laser light. The sensor can measure differences in magnetic fields, over a 20 mm baseline, of 10 fT/[Formula: see text] at frequencies above 20 Hz. The maximum rejection of magnetic field noise is 1000 at 10 Hz. By use of a set of compensation coils wrapped around the sensor, we also measure the sensor sensitivity at several external bias field strengths up to 150 mG. This device is useful for applications that require both sensitive gradient field information and high common-mode noise cancellation.

arXiv:1701.03236•Applied Physics Letters•Jan 16, 2017•179 citations

Microfabricated SERF Atomic Magnetometers for Measurement of Weak Magnetic Field

Kangni Liu, Jintang Shang, Jin Zhang +4 more

This paper introduces measurement of weak magnetic field using a novel design of chip-scale Spin Exchange Relaxation Free (SERF) atomic magnetometer based on a microfabricated Rubidium (Rb) vapor cell. The sensor, which integrates a micro-fabricated Rb vapor cell, a heater and related components, is fabricated by stacking printed circuit boards (PCB) and Micro Electro Mechanical Systems (MEMS) process technology. During the experiments, the noise of the measurement using the atomic magnetometer was obtained. In addition, a test of the simulated magnetic field was performed in a shielding cylinder, and the signal of the simulated magnetic field about 100 pT at 1.2 Hz was measured. The signal is processed by the software using a notch filter to suppress the Direct Current (DC) noise and 50Hz noise. This paper provides a novel micro-fabricated device for detecting weak magnetic field.

IEEE Electronic Components and Technology Conference (ECTC)•Jun 1, 2020•3 citations

High-Sensitivity, Microfabricated Quantum Magnetometers With an Intelligent Solar Heating System

Yintao Ma, Yao Chen, Mingzhi Yu +6 more

Atomic magnetometers, a prominent class of quantum sensors, have become increasingly significant in magnetometry, with extensive applications in cutting-edge physics, biomedical imaging, industrial inspection, and beyond. However, the power consumption of an atomic magnetometer is primarily dominated by that demanded to heat the atomic vapor cell to its operating temperature. This operating temperature determines the alkali-metal atomic density, thereby influencing the magnetic field sensitivity and overall power consumption, which poses a potential obstacle to the large-scale engineering application of atomic magnetometers. In this article, a novel heating method utilizing renewable solar energy is proposed for the first time, which can surpass the limitation of conventional heating methods in thermo-atom-based quantum sensors. By exploiting an intelligent closed-loop control system to adaptively regulate the functionalized sunlight power, this proposed method has the capability of both high heating efficiency and accuracy. The heating properties and laser absorption spectrum at different temperatures up to 180 °C are characterized substantiating the feasibility of utilizing sunlight. Moreover, a sunlight-heated, highly sensitive, microfabricated atomic magnetometer with a magnetic field sensitivity of 18 fT/Hz1/2is demonstrated. And the single-chamber microelectromechanical system atomic vapor cell as the key component is fabricated by utilizing deep silicon micromachining and anodic bonding techniques. This proposed technique can be further extended to all quantum sensing systems based on thermal atomic ensembles and open up new possibilities for the development of self-powered, environmentally friendly quantum sensors.

IEEE/ASME Transactions on Mechatronics•Jan 8, 2025•7 citations
An integrated optically-controlled sensor, suitable for remote, high-sensitivity detection of magnetic fields is presented. The operation of the sensor both in earth field in a Bell-Bloom type configuration is demonstrated as well as in a spin-exchange relaxation-free mode (SERF) and reach sensitivities better than 500 fT/radicHz at 10 Hz. The design and initial measurements of a small atomic magnetometer that has no electrical connections near the sensor head is presented. The sensor is fabricated by use of methods derived from microelectromechanical (MEMS) systems and integrated with off-the-shelf micro-optical components. Light is coupled through fibers to and from the sensor head for interrogation of the atoms. Heating of the atomic vapor is achieved by a second fiber-coupled laser source, utilizing the absorption properties of the vapor cell.
We present initial measurements of an atomic magnetometer in which the microfabricated sensor head is coupled to the control system by optical fibers. Because there are no electrical connections, the sensor head is largely non-magnetic, and degradation of the magnetometer performance due to internal magnetic fields is avoided. The sensor head is fabricated by use of methods derived from micro-electromechanical (MEMS) systems and integrated with off-the-shelf micro-optical components. Light is coupled through fibers to and from the sensor head for interrogation of the atoms as well as temperature stabilization of the vapor cell.
We demonstrate an optical magnetometer based on a microfabricated 87Rb vapor cell in a micromachined silicon sensor head. The alkali atom density in the vapor cell is increased by heating the cell with light brought to the sensor through an optical fiber, and absorbed by colored filters attached to the cell windows. A second fiber-optically coupled beam optically pumps and interrogates the atoms. The magnetometer operates on 140 mW of heating power and achieves a sensitivity below 20 fT/√Hz throughout most of the frequency band from 15 Hz to 100 Hz. Such a sensor can measure magnetic fields from the human heart and brain.
We report on the development of a microfabricated atomic magnetic gradiometer based on optical spectroscopy of alkali atoms in the vapor phase. The gradiometer, which operates in the spin-exchange relaxation free regime, has a length of 60 mm and cross sectional diameter of 12 mm, and consists of two chip-scale atomic magnetometers which are interrogated by a common laser light. The sensor can measure differences in magnetic fields, over a 20 mm baseline, of 10 fT/[Formula: see text] at frequencies above 20 Hz. The maximum rejection of magnetic field noise is 1000 at 10 Hz. By use of a set of compensation coils wrapped around the sensor, we also measure the sensor sensitivity at several external bias field strengths up to 150 mG. This device is useful for applications that require both sensitive gradient field information and high common-mode noise cancellation.
This paper introduces measurement of weak magnetic field using a novel design of chip-scale Spin Exchange Relaxation Free (SERF) atomic magnetometer based on a microfabricated Rubidium (Rb) vapor cell. The sensor, which integrates a micro-fabricated Rb vapor cell, a heater and related components, is fabricated by stacking printed circuit boards (PCB) and Micro Electro Mechanical Systems (MEMS) process technology. During the experiments, the noise of the measurement using the atomic magnetometer was obtained. In addition, a test of the simulated magnetic field was performed in a shielding cylinder, and the signal of the simulated magnetic field about 100 pT at 1.2 Hz was measured. The signal is processed by the software using a notch filter to suppress the Direct Current (DC) noise and 50Hz noise. This paper provides a novel micro-fabricated device for detecting weak magnetic field.
Atomic magnetometers, a prominent class of quantum sensors, have become increasingly significant in magnetometry, with extensive applications in cutting-edge physics, biomedical imaging, industrial inspection, and beyond. However, the power consumption of an atomic magnetometer is primarily dominated by that demanded to heat the atomic vapor cell to its operating temperature. This operating temperature determines the alkali-metal atomic density, thereby influencing the magnetic field sensitivity and overall power consumption, which poses a potential obstacle to the large-scale engineering application of atomic magnetometers. In this article, a novel heating method utilizing renewable solar energy is proposed for the first time, which can surpass the limitation of conventional heating methods in thermo-atom-based quantum sensors. By exploiting an intelligent closed-loop control system to adaptively regulate the functionalized sunlight power, this proposed method has the capability of both high heating efficiency and accuracy. The heating properties and laser absorption spectrum at different temperatures up to 180 °C are characterized substantiating the feasibility of utilizing sunlight. Moreover, a sunlight-heated, highly sensitive, microfabricated atomic magnetometer with a magnetic field sensitivity of 18 fT/Hz1/2is demonstrated. And the single-chamber microelectromechanical system atomic vapor cell as the key component is fabricated by utilizing deep silicon micromachining and anodic bonding techniques. This proposed technique can be further extended to all quantum sensing systems based on thermal atomic ensembles and open up new possibilities for the development of self-powered, environmentally friendly quantum sensors.