Matter–wave interferometry is a powerful tool for high-precision measurements of the quantum properties of atoms, many-body phenomena and gravity. The most precise matter–wave interferometers exploit the excellent localization in momentum space and coherence of the degenerate gases. Further enhancement of the sensitivity and reduction of complexity are crucial conditions for the success and widening of their applications. Here we introduce a multi-state interferometric scheme that offers advances in both these aspects. The coherent coupling between Bose–Einstein condensates in different Zeeman states is used to generate high-harmonic output signals with an enhanced resolution and the maximum possible interferometric visibility. We demonstrate the realization of such an interferometer as a compact, easy to use, atom-chip device. This provides an alternative method for the measurement of the light–atom and surface–atom interactions and enables the application of multi-parameter sensing schemes in cold-atom interferometry.
Matter–wave interferometry is a powerful tool for high-precision measurements of the quantum properties of atoms, many-body phenomena and gravity. The most precise matter–wave interferometers exploit the excellent localization in momentum space and coherence of the degenerate gases. Further enhancement of the sensitivity and reduction of complexity are crucial conditions for the success and widening of their applications. Here we introduce a multi-state interferometric scheme that offers advances in both these aspects. The coherent coupling between Bose–Einstein condensates in different Zeeman states is used to generate high-harmonic output signals with an enhanced resolution and the maximum possible interferometric visibility. We demonstrate the realization of such an interferometer as a compact, easy to use, atom-chip device. This provides an alternative method for the measurement of the light–atom and surface–atom interactions and enables the application of multi-parameter sensing schemes in cold-atom interferometry.
Cold-atom interferometry is a powerful tool for high-precision measurements of the quantum properties of atoms, many-body interactions and gravity. Further enhancement of sensitivity and reduction of complexity of these devices are crucial conditions for success of their applications. Here we introduce a multi-path interferometric scheme that offers advances in both these aspects. It uses coherent coupling between Bose-Einstein condensates in different Zeeman states to generate an interferometric signal with sharp fringes. We realise such an interferometer as a compact easy-to-use atom-chip device and thus provide an alternative method for measurement of the light-atom and surface-atom interactions.
The integration of cold atomic sources and electromagnetic field sources in the same device is a major frontier for both fundamental science and advanced technology. In this paper, we discuss the realization of the Bose-Einstein condensate (BEC) on an AtomChip and describe such an experimental configuration realized at LENS. We also concentrate on the realization of a particular integrated matter wave interferometer where coherent coupling between the BECs in different Zeeman states is used to produce a fringe time-population signal at the output. Finally, we discuss the prospects for application of such a device as a multi-path interferometer.\n\t\t\t3rd International School and Conference on Photonics, Aug 29-Sep 02, 2011, Belgrade, Serbia
Particle-wave duality enables the construction of interferometers for matter waves, which complement optical interferometers in precision measurement devices. This requires the development of atom-optics analogues to beam splitters, phase shifters and recombiners. Integrating these elements into a single device has been a long-standing goal. Here we demonstrate a full Mach–Zehnder sequence with trapped Bose–Einstein condensates confined on an atom chip. Particle interactions in our Bose–Einstein condensate matter waves lead to a nonlinearity, absent in photon optics. We exploit it to generate a non-classical state having reduced number fluctuations inside the interferometer. Making use of spatially separated wave packets, a controlled phase shift is applied and read out by a non-adiabatic matter-wave recombiner. We demonstrate coherence times a factor of three beyond what is expected for coherent states, highlighting the potential of entanglement as a resource for metrology. Our results pave the way for integrated quantum-enhanced matter-wave sensors. Atom interferometers exploit wave-particle duality and can be used as sensitive measurement devices. Berrada et al.present a Mach–Zehnder interferometer for Bose–Einstein condensates trapped on an atom chip and demonstrate enhanced performance using non-classical states.
Bose-Einstein condensates are coherent matter waves, produced by cooling gaseous atomic clouds to ultra-low temperatures. For applications in atom interferometry and precision measurements, Bose-condensed sources present an intriguing alternative to thermal atoms. Although the current sensitivity achievable with interferometers using coherent atoms is not comparable to thermal beam machines (mainly due to the lower flux), there are promising ways to utilise the potential of Bose-condensed sources for atom interferometry. Among those is the low momentum width of Bose-Einstein condensates, which can generally be well controlled and is advantageous for increased interferometric sensitivities by implementing large momentum transfer beam splitters. As part of this thesis, experimental and theoretical investigations are presented to investigate the potential of Bose-Einstein condensates for such applications. We shall present the quantum projection noise limited performance of a Ramsey interferometer operating on the atomic clock transition of a freely expanding cloud of Bose-condensed rubidium 87 atoms. The results include Ramsey fringes of high visibility, not measurably affected by atomic interaction-induced dephasing effects. The achievement and detection of the quantum projection noise limit rely critically on the precision and accuracy of both the imaging setup and the coupling scheme in the interferometric beam splitters. The stabilisation of the beam splitters via an optical Sagnac interferometer is the basis for the quantum projection noise limited performance of the interferometer presented. For an increase of bandwidth and flux in atom interferometric measurements, it is advantageous to use a continuous atomic beam. A truly continuous coherent atom source has not been realised to date, and we present results on a pumping mechanism in this thesis, as a decisive step towards a continuous atom laser. By the investigation of different momentum resonances, we find that the pumping scheme relies on a Raman superradiance-like process. Finally, the thesis demonstrates two interaction measurements in rubidium. The strong mean field interactions due to the high densities in Bose-Einstein condensates are used to probe the potential of a rubidium 87 condensate with an atom laser. The measurement allows a determination of the scattering length between the two atomic states involved. In addition to this two-body scattering scheme, we present a measurement of three-body loss coefficients, extracted from loss curves in rubidium 85 Bose-Einstein condensates. The measurement provides new upper bounds on the three-body loss coefficients at the scattering lengths considered.
Interference with atomic and molecular matter waves is a rich branch of atomic physics and quantum optics. It started with atom diffraction from crystal surfaces and the separated oscillatory fields technique used in atomic clocks. Atom interferometry is now reaching maturity as a powerful art with many applications in modern science. In this review the basic tools for coherent atom optics are described including diffraction by nanostructures and laser light, three-grating interferometers, and double wells on atom chips. Scientific advances in a broad range of fields that have resulted from the application of atom interferometers are reviewed. These are grouped in three categories: (i) fundamental quantum science, (ii) precision metrology, and (iii) atomic and molecular physics. Although some experiments with Bose-Einstein condensates are included, the focus of the review is on linear matter wave optics, i.e., phenomena where each single atom interferes with itself.
Matter-wave interferometers show great a potential for improving inertial sensing. The absence of drifts recommends them for a variety of applications in geodesy, navigation, or fundamental physics. Here, ultracold atomic ensembles, featuring a velocity distribution well below the photon recoil velocity, open up new perspectives. In contrast to standard laser cooling methods, they allow to reach better beam-splitting efficiencies and, hence, a higher contrast as well as to reduce systematic uncertainties and biases. Presently, Bose-Einstein condensates (BECs) provide the means to achieve the lowest expansion energies of few picokelvin. Indeed, the momentum distribution of a BEC can be further narrowed after reaching the regime of ballistic expansion, where all mean field energy is converted to kinetic energy, by the application of the delta-kick collimation technique. With such ensembles, Bragg processes can be driven with an efficiency of above 95% as well as Bloch oscillations performed without large atomic losses or dephasing. Both enable efficient large momentum transfer in interferometers to enhance their sensitivity for inertial effects. In a so-called twin-lattice atom interferometers more than thousand photon recoils are used to form compact but sensitive atom interferometers. These methods not only bring in reach extremely accurate gravimeters and accelerometers but also gyroscopes. Like the Sagnac effect in ring laser or fiber gyroscopes, the sensitivity of atom interferometers to rotations increases with the space-time area enclosed by the interferometer. In the case of light interferometers, the latter can be enlarged by forming multiple fiber loops. However, the equivalent for matter-wave interferometers remains an experimental challenge. An atom interferometer with scalable area may be formed in a twin lattice combined with a relaunch mechanism to obtain multi loops as well. Due to this scalability, it offers the perspective of reaching unprecedented sensitivities for rotations in comparably compact sensor head setups. Moreover, atom-chip technologies offer the possibility to generate a BEC and perform delta-kick collimation in a fast and reliable away, paving the way for field-deployable miniaturized atomic devices. Last but not least, the extremely low expansion energies of BECs open up to extend the time atoms spend in the interferometer to tens of seconds. This brings in reach unprecedented sensitivities in space-borne applications such as satellite geodesy.