Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

CW 795 nm Rb Vapor Laser Pumped by Volume Transmission Grating-Stabilized Diode Bar

Randall J. Lane, Alan B. Petersen, John Gloyd

Published May 1, 2007• 0 citations
Publisher

Abstract

We have constructed an atomic Rb vapor laser, operating at 795 nm. The laser is optically pumped by a fiber-coupled CW laser diode bar, wavelength-controlled at the 780 nm Rb absorption using a volume transmission grating. CW output from the Rb laser is 260 mW.
DOI
10.1109/cleo.2007.4452949

Related papers

CW Rb Vapor Lasers Directly Pumped by Laser Diode Arrays with Volume Transmission Gratings

Randall J. Lane, Alan B. Petersen, John Gloyd +1 more

We describe CW atomic Rb vapor lasers, operating at 795 nm pumped by line-narrowed laser diode arrays using volume transmission gratings. Various laser architectures have been explored with output power up to 800 mW.

Frontiers in Optics•Jan 1, 2007•0 citations

Quasicontinuous wave linearly polarized rubidium vapor laser pumped by a 5-bar laser diode stack

Zhiyong Li, Rongqing Tan, Wei Huang +1 more

We report a quasicontinuous wave (CW) linearly polarized rubidium vapor laser. The pumping source consists of five laser diode bars and its linewidth is reduced from the raw 1.8 to 0.2 nm by a bulk volume Bragg grating. Instead of adopting the “quasi-waveguide structure” gain cell, the pumping light of the rubidium vapor laser propagates freely in the vapor cell. The pumping light with polarization perpendicular to one of the rubidium laser is coupled into the resonator cavity by the polarized beam splitter. This laser configuration is suitable for a convection-cooling diode-pumped alkali vapor laser.

Optical Engineering•Nov 21, 2014•5 citations

Tunable and Linewidth-Reduced Laser Diode Stack for Rubidium Laser Pumping

Zhiyong Li, Rongqing Tan, Cheng Xu +1 more

Linewidth of a laser diode stack with 5 bar is reduced to 0.2 nm from 1.8 nm through the use of an external volume Bragg grating (VBG) cavity. The temperature of the VBG is controlled efficiently to make the central wavelength tunable. The linewidth changes little in the wavelength-tuning experiments. Since the tunable range covers the rubidium D2 absorption line, the stack can be used to pump the rubidium laser efficiently.

Chinese Physics Letters•Nov 1, 2013•5 citations

Theoretical Modeling and Analysis of Blue Laser Characteristics of Continuous-Wave Single-Wavelength Two-Photon Pumped Rb-Vapor Laser

Yanhui Ji, Yang He, Haohua Wan +2 more

Based on an analysis of kinetic processes in the continuous-wave (CW) single-wavelength two-photon pumped Rb-vapor laser (Rb-TPAL), a three-dimensional computational model is established using the rate equation. Based on the application of the model to cavity-enhanced Rb-TPAL [Yuanet al.,Optics Express29, 4858 (2021)], the calculated and measured dependences of the laser power on the pump power show good agreement. We simulate the Rb-TPAL pumped by a high-power CW laser diode and analyze the effects of temperature, vapor cell length, pump waist, vapor cell transmission, and output mirror reflectance on the characteristics of the blue laser. The results suggest that the output power and efficiency of blue laser can be improved by optimizing the above parameters; however, the particles in the$5^{2}\text{D}_{5/2}$level face difficulty to transition to the$6^{2}\text{P}_{3/2}$level, and this limits the further improvement of blue laser efficiency; therefore, an approach is proposed to improve the efficiency of Rb-TPAL. This study can be useful for designing a two-photon pumped alkali metal laser with high-power output.

IEEE Journal of Quantum Electronics•Dec 15, 2021•8 citations

778.1 nm distributed feedback lasers for Rb two-photon atomic systems with sub-4 kHz linewidths

Eugenio Di Gaetano, Brendan Keliehor, Kevin Francis Gallacher +4 more

A new epitaxial layer design with a double mode expander layer, high refractive index claddings, and an aluminum-free active area has been used to demonstrate distributed feedback lasers operating at 778.1 nm wavelength with reduced Lorentzian linewidth aimed at miniature atomic clock applications. The design also reduces the vertical beam divergence to improve the modal matching with optical fibers as well as maintain the high power output and reduce the emission linewidth. The lasers demonstrate single-mode operation with an over 35 dB side-mode suppression ratio, a power output ≤58 mW, a coupling efficiency to tapered fibers ≤40%, and a Lorentzian linewidth of 3.7 kHz. The performance allowed the free-running distributed feedback lasers to demonstrate spectroscopy of Rb vapor, which resolved the 85Rb and 87Rb two-photon transitions.

APL Photonics•May 1, 2024•12 citations

Rubidium spectroscopy with 778- to 780-nm distributed feedback laser diodes

Anselm J. Deninger, Sebastian Kraft, Frank Lison +1 more

Distributed feedback (DFB) laser chips have recently become available at wavelengths that match the D1 and D2 resonance transitions of alkaline atoms. We investigated the spectral properties, tuning characteristics and modulation behavior of continuous wave, single-mode DFB diodes at 778-780 nm and performed high-resolution spectroscopy of Rubidium vapor. The mode-hop free tuning range of the DFB diodes was as large as 2.4 nm (1186 GHz). The line width of the laser diodes was examined both with a heterodyne beat experiment and with high-resolution Doppler-free two photon spectroscopy, yielding a half width of 2-2.5 MHz. The saturation spectra of the D2-line of 85Rb and 87Rb were recorded with a resolution close to the natural line width. The emission frequency was actively stabilized to Doppler-free transitions with a relative accuracy of better than 4 parts in 109 using commercially available servo devices only. The output power of 80 mW was sufficient to allow for two photon spectroscopy of the 5S-5D-transition of 87Rb. We conclude that the performance of the DFB laser equals that of grating-stabilized external-cavity diode lasers (ECDLs), without the mechanical complexity of the latter systems. The DFB diode is thus well-suited to high-resolution applications in alkaline spectroscopy, including laser cooling and optical manipulation of ultra-cold atoms.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Apr 28, 2005•2 citations
We report a quasicontinuous wave (CW) linearly polarized rubidium vapor laser. The pumping source consists of five laser diode bars and its linewidth is reduced from the raw 1.8 to 0.2 nm by a bulk volume Bragg grating. Instead of adopting the “quasi-waveguide structure” gain cell, the pumping light of the rubidium vapor laser propagates freely in the vapor cell. The pumping light with polarization perpendicular to one of the rubidium laser is coupled into the resonator cavity by the polarized beam splitter. This laser configuration is suitable for a convection-cooling diode-pumped alkali vapor laser.
Based on an analysis of kinetic processes in the continuous-wave (CW) single-wavelength two-photon pumped Rb-vapor laser (Rb-TPAL), a three-dimensional computational model is established using the rate equation. Based on the application of the model to cavity-enhanced Rb-TPAL [Yuanet al.,Optics Express29, 4858 (2021)], the calculated and measured dependences of the laser power on the pump power show good agreement. We simulate the Rb-TPAL pumped by a high-power CW laser diode and analyze the effects of temperature, vapor cell length, pump waist, vapor cell transmission, and output mirror reflectance on the characteristics of the blue laser. The results suggest that the output power and efficiency of blue laser can be improved by optimizing the above parameters; however, the particles in the52D5/25^{2}\text{D}_{5/2}52D5/2​level face difficulty to transition to the62P3/26^{2}\text{P}_{3/2}62P3/2​level, and this limits the further improvement of blue laser efficiency; therefore, an approach is proposed to improve the efficiency of Rb-TPAL. This study can be useful for designing a two-photon pumped alkali metal laser with high-power output.
A new epitaxial layer design with a double mode expander layer, high refractive index claddings, and an aluminum-free active area has been used to demonstrate distributed feedback lasers operating at 778.1 nm wavelength with reduced Lorentzian linewidth aimed at miniature atomic clock applications. The design also reduces the vertical beam divergence to improve the modal matching with optical fibers as well as maintain the high power output and reduce the emission linewidth. The lasers demonstrate single-mode operation with an over 35 dB side-mode suppression ratio, a power output ≤58 mW, a coupling efficiency to tapered fibers ≤40%, and a Lorentzian linewidth of 3.7 kHz. The performance allowed the free-running distributed feedback lasers to demonstrate spectroscopy of Rb vapor, which resolved the 85Rb and 87Rb two-photon transitions.
Distributed feedback (DFB) laser chips have recently become available at wavelengths that match the D1 and D2 resonance transitions of alkaline atoms. We investigated the spectral properties, tuning characteristics and modulation behavior of continuous wave, single-mode DFB diodes at 778-780 nm and performed high-resolution spectroscopy of Rubidium vapor. The mode-hop free tuning range of the DFB diodes was as large as 2.4 nm (1186 GHz). The line width of the laser diodes was examined both with a heterodyne beat experiment and with high-resolution Doppler-free two photon spectroscopy, yielding a half width of 2-2.5 MHz. The saturation spectra of the D2-line of 85Rb and 87Rb were recorded with a resolution close to the natural line width. The emission frequency was actively stabilized to Doppler-free transitions with a relative accuracy of better than 4 parts in 109 using commercially available servo devices only. The output power of 80 mW was sufficient to allow for two photon spectroscopy of the 5S-5D-transition of 87Rb. We conclude that the performance of the DFB laser equals that of grating-stabilized external-cavity diode lasers (ECDLs), without the mechanical complexity of the latter systems. The DFB diode is thus well-suited to high-resolution applications in alkaline spectroscopy, including laser cooling and optical manipulation of ultra-cold atoms.