Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Operation of Low-$T_{c}$ Circuits in a Magnetic Environment

Romain Collot, Pascal Febvre, J. Kunert, H.‐G. Meyer

Published Dec 10, 2012• 15 citations
Publisher

Abstract

Low-Tcrapid single flux quantum (RSFQ) digital circuits without magnetic shielding fabricated with the FLUXONICS Foundry have been studied in the presence of external magnetic fields. Magnetic fields parallel to the plane of the chip are shown to influence more drastically the nominal behavior of the circuits above 5 μT, while perpendicular magnetic fields can reach 15 μT without affecting significantly their operation. This is confirmed by experimental SQUID interference patterns.

DOI
10.1109/tasc.2012.2233252

Related papers

Characterization of an On-Chip Magnetic Shielding Technique for Improving SFQ Circuit Performance

Romain Collot, Pascal Febvre, J. Kunert +3 more

An on-chip magnetic shielding technique was characterized on several DC-SQUIDs to prepare the next generation of complex digital RSFQ circuits designed by the FLUXONICS foundry. The maximal frequency of operation of a toggle flip-flop cell was used as a criteria to validate the concept. It goes from a simulated value of 52 GHz (46 ± 2 GHz experimentally), for a McCumber parameter βc= 1 with JC= 1 kA/cm2 in the absence of external magnetic field, down to 29 GHz in the presence of an external field of 88 μT. The shielding technique consists of surrounding a circuit by one or several superconducting niobium loops with the same layers as for the SFQ circuit. The loops are connected to the ground plane with vias. It is shown experimentally that the local magnetic field is reduced by a factor of 4 for the best shielded configuration, which limits the reduction of the maximal frequency of operation in presence of external magnetic field.

IEEE Transactions on Applied Superconductivity•Mar 15, 2016•5 citations

Influence of external magnetic fields on the inductive properties of rapid single-flux-quantum digital circuits

Romain Collot, Pascal Febvre, Jean-Luc Issler +5 more

A method has been developped to take into account the presence of a local external magnetic field in Superconducting Quantum Interference Devices (SQUIDs) loops composing Rapid Single-Flux-Quantum (RSFQ) circuits, through modifications of circuit inductances. A good agreement is observed between analytical formulas and simulations performed by time-domain softwares. The agreement with the first experiments is still only qualitative at this stage.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•3 citations

Investigation of the flux state in single-flux-quantum circuits with moats by scanning SQUID microscope

Koji A. O. Suzuki, Hiroki Kawamura, Michitaka Maruyama +10 more

We have investigated the flux state in high- and low- T c SFQ circuits having superconducting ground planes with moats by a scanning SQUID microscope (SSM) system. Observation of YBa 2 Cu 3 O y (YBCO) sampler circuits having superconducting ground planes with 5 µm-wide moats confirmed that magnetic flux was excluded from the moat-surrounded area including ramp-edge Josephson junctions. The threshold value for complete flux exclusion was about 0.8 µT slightly depending on chips, which can be achieved readily with dual μ-metal magnetic shielding. Moreover, we have observed the flux state in Nb multilayer structures having a superconducting ground plane with 4 µm wide moats, which was designed and fabricated using the CONNECT cell library. It was confirmed that magnetic flux was trapped selectively into moats with appropriate configuration, which were fabricated within each 40 µm × 40 µm unit cell.

Superconductor Science and Technology•Mar 16, 2006•5 citations

[INVITED] Digital magnetometers based on the Single-Flux-Quantum technique

Pascal Febvre, Stolz, Ronny, Meyer, Hans-Georg +5 more

Superconducting Quantum Interference Devices (SQUIDs) are known to be the most sensitive magnetometers. We present a new type of low-Tc digital SQUID that is based on Rapid-Single-Flux-Quantum (RSFQ) Logic. It allows the on-chip conversion of the detected magnetic field into a digital form, suitable for noiseless processing, very high dynamic range and high slew rate. The sensitivity, limited to one magnetic single flux quantum, and a dynamic range of 76 dB, that corresponds to an upper limit of the magnetic field amplitude higher than 5 μT, have been measured along with overnight stability. First signatures of magnetic fields have been observed simultaneously with the ones of analogue SQUIDs in the ultra low noise environment of the Laboratoire Souterrain à Bas Bruit (LSBB) located in Rustrel, Provence, France.

•Jun 15, 2009•0 citations

The influence of the ground current on large-scale single-flux-quantum circuits

K. Fujiwara, T Hikida, Nobuyuki Yoshikawa +3 more

In this study we have investigated the influence of an externally applied ground current on large-scale single-flux-quantum (SFQ) circuits. A Josephson transmission line containing 10 4 junctions with a total bias current of 1.8 A was examined for this purpose. The test results show that the ground current affects the circuit operation remarkably strongly. In the worst case, the ground current of about 10 mA for a 5 mm die chip disturbs the circuit operation. The results also show that DC/SFQ and SFQ/DC converters are very sensitive to the ground current. To eliminate the effect of the ground current, we have made SFQ circuits completely shielded from the external magnetic field by using upper and lower ground planes. It was found that the shielded SFQ circuits are much less sensitive to the ground current. These results show that the magnetic shielding structure is one solution for reducing the effects of the ground current and hence the external magnetic field.

Superconductor Science and Technology•Mar 16, 2006•11 citations

Influence of the Superconducting Ground Plane on the Performance of RSFQ Cells

Ruben van Staden, Kyle Jackman, Coenrad Johann Fourie +1 more

Single-flux-quantum (SFQ) digital circuits are mostly based on cells that rely on reliable foundry processes that make use of a superconducting ground plane as a reference for the active elements and the microstrip line interconnects. The quantum of magnetic flux h/2e, associated with the binary information, corresponds to a magnetic field energy density that needs to be localized in space to limit interactions between adjacent cells. In other words, mutual inductances can harm the proper behaviour of circuits unless they are taken carefully into account during the design phase. We studied extensively the Josephson transmission line cell with different geometrical configurations of the ground plane and bias pads. We found with the use of InductEx that the return current sometimes follows paths that are far from what intuition tells, which can lead to nonoptimized designs. In this paper, we emphasize the limitations due to the presence of external or internal magnetic fields. Then, we compare obtained performances with the ones with optimized geometries for which the presence of the magnetic field is taken into account from the design phase.

IEEE Transactions on Applied Superconductivity•Jan 17, 2017•5 citations
Operation of Low-TcT_{c}Tc​ Circuits in a Magnetic Environment
Low-Tcrapid single flux quantum (RSFQ) digital circuits without magnetic shielding fabricated with the FLUXONICS Foundry have been studied in the presence of external magnetic fields. Magnetic fields parallel to the plane of the chip are shown to influence more drastically the nominal behavior of the circuits above 5 μT, while perpendicular magnetic fields can reach 15 μT without affecting significantly their operation. This is confirmed by experimental SQUID interference patterns.
An on-chip magnetic shielding technique was characterized on several DC-SQUIDs to prepare the next generation of complex digital RSFQ circuits designed by the FLUXONICS foundry. The maximal frequency of operation of a toggle flip-flop cell was used as a criteria to validate the concept. It goes from a simulated value of 52 GHz (46 ± 2 GHz experimentally), for a McCumber parameter βc= 1 with JC= 1 kA/cm2 in the absence of external magnetic field, down to 29 GHz in the presence of an external field of 88 μT. The shielding technique consists of surrounding a circuit by one or several superconducting niobium loops with the same layers as for the SFQ circuit. The loops are connected to the ground plane with vias. It is shown experimentally that the local magnetic field is reduced by a factor of 4 for the best shielded configuration, which limits the reduction of the maximal frequency of operation in presence of external magnetic field.
We have investigated the flux state in high- and low- T c SFQ circuits having superconducting ground planes with moats by a scanning SQUID microscope (SSM) system. Observation of YBa 2 Cu 3 O y (YBCO) sampler circuits having superconducting ground planes with 5 µm-wide moats confirmed that magnetic flux was excluded from the moat-surrounded area including ramp-edge Josephson junctions. The threshold value for complete flux exclusion was about 0.8 µT slightly depending on chips, which can be achieved readily with dual μ-metal magnetic shielding. Moreover, we have observed the flux state in Nb multilayer structures having a superconducting ground plane with 4 µm wide moats, which was designed and fabricated using the CONNECT cell library. It was confirmed that magnetic flux was trapped selectively into moats with appropriate configuration, which were fabricated within each 40 µm × 40 µm unit cell.
Superconducting Quantum Interference Devices (SQUIDs) are known to be the most sensitive magnetometers. We present a new type of low-Tc digital SQUID that is based on Rapid-Single-Flux-Quantum (RSFQ) Logic. It allows the on-chip conversion of the detected magnetic field into a digital form, suitable for noiseless processing, very high dynamic range and high slew rate. The sensitivity, limited to one magnetic single flux quantum, and a dynamic range of 76 dB, that corresponds to an upper limit of the magnetic field amplitude higher than 5 μT, have been measured along with overnight stability. First signatures of magnetic fields have been observed simultaneously with the ones of analogue SQUIDs in the ultra low noise environment of the Laboratoire Souterrain à Bas Bruit (LSBB) located in Rustrel, Provence, France.
In this study we have investigated the influence of an externally applied ground current on large-scale single-flux-quantum (SFQ) circuits. A Josephson transmission line containing 10 4 junctions with a total bias current of 1.8 A was examined for this purpose. The test results show that the ground current affects the circuit operation remarkably strongly. In the worst case, the ground current of about 10 mA for a 5 mm die chip disturbs the circuit operation. The results also show that DC/SFQ and SFQ/DC converters are very sensitive to the ground current. To eliminate the effect of the ground current, we have made SFQ circuits completely shielded from the external magnetic field by using upper and lower ground planes. It was found that the shielded SFQ circuits are much less sensitive to the ground current. These results show that the magnetic shielding structure is one solution for reducing the effects of the ground current and hence the external magnetic field.
Single-flux-quantum (SFQ) digital circuits are mostly based on cells that rely on reliable foundry processes that make use of a superconducting ground plane as a reference for the active elements and the microstrip line interconnects. The quantum of magnetic flux h/2e, associated with the binary information, corresponds to a magnetic field energy density that needs to be localized in space to limit interactions between adjacent cells. In other words, mutual inductances can harm the proper behaviour of circuits unless they are taken carefully into account during the design phase. We studied extensively the Josephson transmission line cell with different geometrical configurations of the ground plane and bias pads. We found with the use of InductEx that the return current sometimes follows paths that are far from what intuition tells, which can lead to nonoptimized designs. In this paper, we emphasize the limitations due to the presence of external or internal magnetic fields. Then, we compare obtained performances with the ones with optimized geometries for which the presence of the magnetic field is taken into account from the design phase.