Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Characterization of an On-Chip Magnetic Shielding Technique for Improving SFQ Circuit Performance

Romain Collot, Pascal Febvre, J. Kunert, H.‐G. Meyer, Ronny Stolz, J-L. Issler

Published Mar 15, 2016• 5 citations
Publisher

Abstract

An on-chip magnetic shielding technique was characterized on several DC-SQUIDs to prepare the next generation of complex digital RSFQ circuits designed by the FLUXONICS foundry. The maximal frequency of operation of a toggle flip-flop cell was used as a criteria to validate the concept. It goes from a simulated value of 52 GHz (46 ± 2 GHz experimentally), for a McCumber parameter βc= 1 with JC= 1 kA/cm2 in the absence of external magnetic field, down to 29 GHz in the presence of an external field of 88 μT. The shielding technique consists of surrounding a circuit by one or several superconducting niobium loops with the same layers as for the SFQ circuit. The loops are connected to the ground plane with vias. It is shown experimentally that the local magnetic field is reduced by a factor of 4 for the best shielded configuration, which limits the reduction of the maximal frequency of operation in presence of external magnetic field.

DOI
10.1109/tasc.2016.2542117

Related papers

Design and Evaluation of Magnetic Field Tolerant Single Flux Quantum Circuits for Superconductive Sensing Systems

Yuki Yamanashi, Nobuyuki Yoshikawa

A promising application of a single-flux quantum (SFQ) circuit is read-out circuitry for a multi-channel superconductive sensor array. In such applications, the SFQ read-out circuit is expected to operate outside a magnetic shield. We investigated an SFQ circuit structure, which is tolerant to an external magnetic field, using the AIST 2.5kA/cm2 Nb standard 2 process, which has four Nb wiring layers including the ground plane. By covering the entire circuit using an upper Nb wiring layer called the control (CTL) layer, the influences of the external magnetic field on the SFQ circuit operation can be avoided. We experimentally evaluated the sheet inductance of the wiring layer underneath the CTL shielding layer to design a magnetic-field-tolerant SFQ circuit. We implemented and measured test circuits comprising toggle flip-flops (TFFs) to evaluate their magnetic field tolerances. The operating margin and maximum operating frequency of the designed TFF did not deteriorate with increases in the magnetic field applied to the test circuit, whereas the operating margin of the conventional TFF was reduced by applying the magnetic field. We have also demonstrated the high-speed operation of the designed TFF operated in an unshielded environment at a frequency of up to 120GHz with a wide operating margin.

IEICE Transactions on Electronics•Jan 1, 2014•6 citations

Operation of Low-$T_{c}$ Circuits in a Magnetic Environment

Romain Collot, Pascal Febvre, J. Kunert +1 more

Low-Tcrapid single flux quantum (RSFQ) digital circuits without magnetic shielding fabricated with the FLUXONICS Foundry have been studied in the presence of external magnetic fields. Magnetic fields parallel to the plane of the chip are shown to influence more drastically the nominal behavior of the circuits above 5 μT, while perpendicular magnetic fields can reach 15 μT without affecting significantly their operation. This is confirmed by experimental SQUID interference patterns.

IEEE Transactions on Applied Superconductivity•Dec 10, 2012•15 citations

Analysis of a Shielding Approach for Magnetic Field Tolerant SFQ Circuits

Rodwell S. Bakolo, Johannes A. Delport, Pascal Febvre +1 more

The operating margins of unshielded SFQ circuits are influenced by external magnetic fields, and earlier research showed experimental results of operating region versus bias current for circuits with in-plane and perpendicularly applied magnetic fields. Here, we report a method that can be used to analyze shields to protect SFQ circuits from external magnetic fields. To validate the approach, we investigated a grid-patterned shield of varying spacing. The analysis was done with cell layouts made according to the Hypres' 4.5 kA/cm2process, in which the top-most layer, M3, was used to implement the shields. It was calculated that a grid shield of 2.5 μm grid bar width and spacing of 5 μm offered a good compromise at both providing shielding and causing a relatively small drift in circuit inductance. In order to make SFQ circuits more tolerant to magnetic fields, we have simulated with circuit parameter alterations to realize the best bias and higher operating held margins, due to external magnetic fields. The external magnetic fields are modeled through three orthogonal coils that generate roughly a uniform magnetic held density throughout the cell under test.

IEEE Transactions on Applied Superconductivity•Feb 15, 2017•5 citations

Influence of the Superconducting Ground Plane on the Performance of RSFQ Cells

Ruben van Staden, Kyle Jackman, Coenrad Johann Fourie +1 more

Single-flux-quantum (SFQ) digital circuits are mostly based on cells that rely on reliable foundry processes that make use of a superconducting ground plane as a reference for the active elements and the microstrip line interconnects. The quantum of magnetic flux h/2e, associated with the binary information, corresponds to a magnetic field energy density that needs to be localized in space to limit interactions between adjacent cells. In other words, mutual inductances can harm the proper behaviour of circuits unless they are taken carefully into account during the design phase. We studied extensively the Josephson transmission line cell with different geometrical configurations of the ground plane and bias pads. We found with the use of InductEx that the return current sometimes follows paths that are far from what intuition tells, which can lead to nonoptimized designs. In this paper, we emphasize the limitations due to the presence of external or internal magnetic fields. Then, we compare obtained performances with the ones with optimized geometries for which the presence of the magnetic field is taken into account from the design phase.

IEEE Transactions on Applied Superconductivity•Jan 17, 2017•5 citations

Investigation of the flux state in single-flux-quantum circuits with moats by scanning SQUID microscope

Koji A. O. Suzuki, Hiroki Kawamura, Michitaka Maruyama +10 more

We have investigated the flux state in high- and low- T c SFQ circuits having superconducting ground planes with moats by a scanning SQUID microscope (SSM) system. Observation of YBa 2 Cu 3 O y (YBCO) sampler circuits having superconducting ground planes with 5 µm-wide moats confirmed that magnetic flux was excluded from the moat-surrounded area including ramp-edge Josephson junctions. The threshold value for complete flux exclusion was about 0.8 µT slightly depending on chips, which can be achieved readily with dual μ-metal magnetic shielding. Moreover, we have observed the flux state in Nb multilayer structures having a superconducting ground plane with 4 µm wide moats, which was designed and fabricated using the CONNECT cell library. It was confirmed that magnetic flux was trapped selectively into moats with appropriate configuration, which were fabricated within each 40 µm × 40 µm unit cell.

Superconductor Science and Technology•Mar 16, 2006•5 citations

Magnetic shielding effect of grounded superconducting niobium layers

Yoshinao Mizugaki, Ryuta Kashiwa

Magnetic isolation is an important issue in the realization of superconducting LSIs including more than ten thousands Josephson junctions. In this paper, we present mutual inductances of two superconducting strip lines coupled through a grounded shield layer. A conventional dc-superconducting quantum interference device (dc-SQUID) method on Nb/AlO x /Nb Josephson IC chips is employed. We have tested one dc-SQUID layout with a floating shield layer for reference, and ten dc-SQUID layouts with grounded shield layers. Four superconducting niobium layers are used as a ground plane, a SQUID line, a shield layer, and a control line from bottom to top. We have confirmed that the number, positions, and dimensions of ground contacts make differences in the mutual inductances. Ground contacts should be placed to enhance the shielding current for effective magnetic isolation.

Journal of Physics Conference Series•Feb 1, 2008•5 citations
An on-chip magnetic shielding technique was characterized on several DC-SQUIDs to prepare the next generation of complex digital RSFQ circuits designed by the FLUXONICS foundry. The maximal frequency of operation of a toggle flip-flop cell was used as a criteria to validate the concept. It goes from a simulated value of 52 GHz (46 ± 2 GHz experimentally), for a McCumber parameter βc= 1 with JC= 1 kA/cm2 in the absence of external magnetic field, down to 29 GHz in the presence of an external field of 88 μT. The shielding technique consists of surrounding a circuit by one or several superconducting niobium loops with the same layers as for the SFQ circuit. The loops are connected to the ground plane with vias. It is shown experimentally that the local magnetic field is reduced by a factor of 4 for the best shielded configuration, which limits the reduction of the maximal frequency of operation in presence of external magnetic field.
A promising application of a single-flux quantum (SFQ) circuit is read-out circuitry for a multi-channel superconductive sensor array. In such applications, the SFQ read-out circuit is expected to operate outside a magnetic shield. We investigated an SFQ circuit structure, which is tolerant to an external magnetic field, using the AIST 2.5kA/cm2 Nb standard 2 process, which has four Nb wiring layers including the ground plane. By covering the entire circuit using an upper Nb wiring layer called the control (CTL) layer, the influences of the external magnetic field on the SFQ circuit operation can be avoided. We experimentally evaluated the sheet inductance of the wiring layer underneath the CTL shielding layer to design a magnetic-field-tolerant SFQ circuit. We implemented and measured test circuits comprising toggle flip-flops (TFFs) to evaluate their magnetic field tolerances. The operating margin and maximum operating frequency of the designed TFF did not deteriorate with increases in the magnetic field applied to the test circuit, whereas the operating margin of the conventional TFF was reduced by applying the magnetic field. We have also demonstrated the high-speed operation of the designed TFF operated in an unshielded environment at a frequency of up to 120GHz with a wide operating margin.
Operation of Low-TcT_{c}Tc​ Circuits in a Magnetic Environment
The operating margins of unshielded SFQ circuits are influenced by external magnetic fields, and earlier research showed experimental results of operating region versus bias current for circuits with in-plane and perpendicularly applied magnetic fields. Here, we report a method that can be used to analyze shields to protect SFQ circuits from external magnetic fields. To validate the approach, we investigated a grid-patterned shield of varying spacing. The analysis was done with cell layouts made according to the Hypres' 4.5 kA/cm2process, in which the top-most layer, M3, was used to implement the shields. It was calculated that a grid shield of 2.5 μm grid bar width and spacing of 5 μm offered a good compromise at both providing shielding and causing a relatively small drift in circuit inductance. In order to make SFQ circuits more tolerant to magnetic fields, we have simulated with circuit parameter alterations to realize the best bias and higher operating held margins, due to external magnetic fields. The external magnetic fields are modeled through three orthogonal coils that generate roughly a uniform magnetic held density throughout the cell under test.
Single-flux-quantum (SFQ) digital circuits are mostly based on cells that rely on reliable foundry processes that make use of a superconducting ground plane as a reference for the active elements and the microstrip line interconnects. The quantum of magnetic flux h/2e, associated with the binary information, corresponds to a magnetic field energy density that needs to be localized in space to limit interactions between adjacent cells. In other words, mutual inductances can harm the proper behaviour of circuits unless they are taken carefully into account during the design phase. We studied extensively the Josephson transmission line cell with different geometrical configurations of the ground plane and bias pads. We found with the use of InductEx that the return current sometimes follows paths that are far from what intuition tells, which can lead to nonoptimized designs. In this paper, we emphasize the limitations due to the presence of external or internal magnetic fields. Then, we compare obtained performances with the ones with optimized geometries for which the presence of the magnetic field is taken into account from the design phase.
We have investigated the flux state in high- and low- T c SFQ circuits having superconducting ground planes with moats by a scanning SQUID microscope (SSM) system. Observation of YBa 2 Cu 3 O y (YBCO) sampler circuits having superconducting ground planes with 5 µm-wide moats confirmed that magnetic flux was excluded from the moat-surrounded area including ramp-edge Josephson junctions. The threshold value for complete flux exclusion was about 0.8 µT slightly depending on chips, which can be achieved readily with dual μ-metal magnetic shielding. Moreover, we have observed the flux state in Nb multilayer structures having a superconducting ground plane with 4 µm wide moats, which was designed and fabricated using the CONNECT cell library. It was confirmed that magnetic flux was trapped selectively into moats with appropriate configuration, which were fabricated within each 40 µm × 40 µm unit cell.
Magnetic isolation is an important issue in the realization of superconducting LSIs including more than ten thousands Josephson junctions. In this paper, we present mutual inductances of two superconducting strip lines coupled through a grounded shield layer. A conventional dc-superconducting quantum interference device (dc-SQUID) method on Nb/AlO x /Nb Josephson IC chips is employed. We have tested one dc-SQUID layout with a floating shield layer for reference, and ten dc-SQUID layouts with grounded shield layers. Four superconducting niobium layers are used as a ground plane, a SQUID line, a shield layer, and a control line from bottom to top. We have confirmed that the number, positions, and dimensions of ground contacts make differences in the mutual inductances. Ground contacts should be placed to enhance the shielding current for effective magnetic isolation.