Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Symposium on Wireless Personal Multimedia Communications (WPMC)

Cooperative jamming for physical layer security in Wireless Sensor Networks

Vandana Milind Rohokale, Neeli R. Prasad, Ramjee Prasad

Published Dec 31, 2012• 12 citations
OpenAlex

Abstract

Interference is generally considered as the redundant and unwanted occurrence in wireless communication. This work proposes a novel cooperative jamming mechanism for scalable networks like Wireless Sensor Networks (WSNs) which makes use of friendly interference to confuse the eavesdropper and increase its uncertainty about the source message. The whole communication link is built with the help of Information theoretic source and channel coding mechanisms. The whole idea is to make use of normally inactive relay nodes in the selective Decode and Forward cooperative communication and make them work as cooperative jamming sources to increase the equivocation of the eavesdropper. In this work, eavesdropper’s equivocation is compared with the main channel in terms of mutual information and secrecy capacity.

Related papers

Jamming and Physical Layer Security for Cooperative Wireless Communication

Vandana Milind Rohokale, Neeli Rashmi Prasad, Ramjee Prasad

Security functionality handled by higher layers of OSI model is a costly affair due to key management and complex mathematical encryption-decryption mechanisms in the scalable networks like wireless sensor networks (WSNs). WSN consists of resource constrained tiny sensor nodes for which battery is their lifetime. Physical layer security is the cost effective solution for such adhoc networks. The cooperative diversity mechanism makes use of the benefits of wireless sensor network scalability in terms of cooperative resource sharing in which multiple diversity channels are created which results into improved wireless connectivity. Cooperative jamming principle is used where the source transmits the encoded signal and at the same time relay transmits the weighted jamming signal to increase the equivocation of the eavesdropper. This work proposes a novel cooperative jamming mechanism for scalable networks like Wireless Sensor Networks (WSNs) which makes use of friendly interference to confuse the eavesdropper and increase its uncertainty about the source message. Channel fading is exploited to achieve perfect secrecy. The full communication link is built with the help of Information theoretic source and channel coding mechanisms. The whole idea is to make use of normally inactive relay nodes in the selective Decode and Forward cooperative communication and make them work as cooperative jamming sources to increase the equivocation of the eavesdropper. In this work, eavesdropper’s channel’s equivocation is compared with the main channel in terms of mutual information and secrecy capacity.

River Publishers eBooks•Dec 3, 2024•0 citations

A Cluster-based Cooperative Jamming Scheme for Secure Communication in Wireless Sensor Network

Tian Zhu, Fei Tong

The environment of wireless sensor networks (WSNs) makes the communication not only have the broadcast nature of wireless transmission, but also be limited to the low power and communication capability of sensor equipment. Both of them make it hard to ensure the confidentiality of communication. In this paper, we propose a cluster-based cooperative jamming scheme based on physical layer security for WSNs. The mathematical principle of the scheme is based on the design principle of code division multiple access. By using the orthogonality of orthogonal vectors, the legitimate receiver can effectively eliminate the noise, which is generated by the cooperative jamming nodes to disturb the eavesdropper. This scheme enables the legitimate receiver to ensure a strong communication confidentiality even if there is no location or channel advantage comparing with eavesdroppers. Through extensive simulations, the security performance of the proposed scheme is investigated in terms of secrecy rate.

IEEE Vehicular Technology Conference•Nov 1, 2020•5 citations

Two-phase cooperative jamming and beamforming for physical layer secrecy

Mohammad Hatami, Mojtaba Jahandideh, Hamid Behroozi

The broadcast nature of wireless communications makes the propagation medium vulnerable to security attacks such as eavesdropping and jamming from adversarial or unauthorized users. Applying physical layer secrecy approaches will enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without using any secret keys. However, physical layer security approaches are typically feasible only when the source-eavesdropper channel is weaker than the source-destination channel. Cooperative jamming can be used to overcome this challenge and increase the secrecy rate. In this paper, the security of two-phase relaying system with multiple intermediate nodes and in the presence of an eavesdropper is investigated. To enhance the system secrecy rate, a joint cooperative beamforming and jamming combined with relay and jammer selections is proposed. In phase I, the source node broadcasts a signal to relays while three intermediate nodes (which act as jammers) help the source node by transmitting random jamming signals to confuse the eavesdropper. Since the friendly (cooperative) jammers create interference for both the intended relays and the eavesdropper, optimal beamforming is applied such that no interference is caused at two preselected desired relays (that are going to receive the confidential massage in phase I). In phase II, two preselected relays transmit the source message with beamforming coefficients such that the received signal at the eavesdropper is completely nulled out. Our goal in this paper is to minimize the received SNR at the eavesdropper while increasing it at the destination as much as possible by applying different methods such as cooperative beamforming, cooperative jamming and relay selection. To avoid operational complexity, we consider the minimum number of intermediate nodes that are necessary without losing the performance. Numerical results demonstrate the advantage of our proposed scheme compared with the scheme with no cooperative jamming.

Iranian Conference on Electrical Engineering•May 1, 2015•2 citations

Combined Physical Network Coding and Friendly Jamming for Secure Wireless Cooperative Communications

Dehuai Li, Shiwei Yan, Xiguang Zhang +1 more

This paper exploits physical layer network coding (PNC) and friendly jamming to improve their physical layer security in wireless two-hop cooperative communications, consisting of one source-destination pair with the help of multiple intermediate nodes in the presence of one eavesdropper. By sending a jamming signal carrying a random binary message from the selected jammer and utilizing the PNC at the selected relay node, the system can avoid the disadvantage of the friendly jamming to the source-relay channel and do good to the relay-destination channel, thereby achieving better secrecy rate. Assuming global channel state information available and memoryless adversaries, we seek to minimize the secrecy outage probability with the optimal relay and jammer selection. Numerical simulation results show that our schemes outperform the conventional approaches in wireless cooperative communications.

IEEE Vehicular Technology Conference•Sep 1, 2016•3 citations

Joint Decode-and-Forward and Cooperative Jamming for Secure Wireless Communications

Shuanglin Huang, Jiaolong Wei, Yang Cao +1 more

In a cooperative wireless network, we exploited node cooperation for achieving physical layer based security. In this paper, the case of one source-destination pair with the help of multiple cooperating nodes(relay nodes and jamming nodes) in the presence of one eavesdropper was considered to improve the performance of secure wireless communications. A novel cooperative scheme joint decode-and-forward and cooperative jamming(JDFCJ) was proposed. In this scheme, the relay nodes transmit a weighted version of the source signals and the jamming nodes just transmit a common weighted jamming signal to confound the eavesdropper. The novel system design is proposed to minimize the transmit power subject to a secrecy rate constraint. For JDFCJ, the optimal power allocation is obtained in closed-form in the condition of the complete nulling of jamming signals at the destination. The numerical evaluation of the transmit power results shows that the proposed scheme can significantly improve the performance of secure wireless communications, as compared to the DF scheme.

International Conference on Wireless Communications, Networking and Mobile Computing•Sep 1, 2011•8 citations

Joint Physical Network Coding and Destination Aided Cooperative Jamming for Secure Wireless Sensor Networks

Dehuai Li, Xiguang Zhang, Yong Shang

In this paper, we investigate physical layer network coding (PNC) and destination assisted cooperative jamming (DACJ) for physical layer security in wireless sensor networks, in which there is one source, one destination, a cluster of intermediate nodes, and multiple eavesdroppers. Under the PNC protocol, the considered two-hop wireless sensor network implements a complete transmission process in two phases. In the first phase, through sending a jamming signal from the destination and exploiting the PNC at the relay, the relay decodes the exclusive-OR (XOR) performed form of the source and the jamming message. Therefore, the jamming signal can degrade the wire-tap channels without hampering the legitimate channel. In the second phase, the relay transmits the re-encoded message to the destination while eavesdroppers are out of work as they cannot extract information from the signal. Thus, the proposed design can significantly improve the performance of secure wireless communications. Meanwhile, the proposed schemes select one optimal node from the intermediate nodes and give an optimal solution of power allocation to maximize secrecy capacity. Numerical simulation results show that the proposed schemes have a better and more stable secrecy performance than the conventional schemes at the same power consumption.

IEEE Vehicular Technology Conference•May 1, 2016•1 citation
Interference is generally considered as the redundant and unwanted occurrence in wireless communication. This work proposes a novel cooperative jamming mechanism for scalable networks like Wireless Sensor Networks (WSNs) which makes use of friendly interference to confuse the eavesdropper and increase its uncertainty about the source message. The whole communication link is built with the help of Information theoretic source and channel coding mechanisms. The whole idea is to make use of normally inactive relay nodes in the selective Decode and Forward cooperative communication and make them work as cooperative jamming sources to increase the equivocation of the eavesdropper. In this work, eavesdropper’s equivocation is compared with the main channel in terms of mutual information and secrecy capacity.
Security functionality handled by higher layers of OSI model is a costly affair due to key management and complex mathematical encryption-decryption mechanisms in the scalable networks like wireless sensor networks (WSNs). WSN consists of resource constrained tiny sensor nodes for which battery is their lifetime. Physical layer security is the cost effective solution for such adhoc networks. The cooperative diversity mechanism makes use of the benefits of wireless sensor network scalability in terms of cooperative resource sharing in which multiple diversity channels are created which results into improved wireless connectivity. Cooperative jamming principle is used where the source transmits the encoded signal and at the same time relay transmits the weighted jamming signal to increase the equivocation of the eavesdropper. This work proposes a novel cooperative jamming mechanism for scalable networks like Wireless Sensor Networks (WSNs) which makes use of friendly interference to confuse the eavesdropper and increase its uncertainty about the source message. Channel fading is exploited to achieve perfect secrecy. The full communication link is built with the help of Information theoretic source and channel coding mechanisms. The whole idea is to make use of normally inactive relay nodes in the selective Decode and Forward cooperative communication and make them work as cooperative jamming sources to increase the equivocation of the eavesdropper. In this work, eavesdropper’s channel’s equivocation is compared with the main channel in terms of mutual information and secrecy capacity.
The environment of wireless sensor networks (WSNs) makes the communication not only have the broadcast nature of wireless transmission, but also be limited to the low power and communication capability of sensor equipment. Both of them make it hard to ensure the confidentiality of communication. In this paper, we propose a cluster-based cooperative jamming scheme based on physical layer security for WSNs. The mathematical principle of the scheme is based on the design principle of code division multiple access. By using the orthogonality of orthogonal vectors, the legitimate receiver can effectively eliminate the noise, which is generated by the cooperative jamming nodes to disturb the eavesdropper. This scheme enables the legitimate receiver to ensure a strong communication confidentiality even if there is no location or channel advantage comparing with eavesdroppers. Through extensive simulations, the security performance of the proposed scheme is investigated in terms of secrecy rate.
The broadcast nature of wireless communications makes the propagation medium vulnerable to security attacks such as eavesdropping and jamming from adversarial or unauthorized users. Applying physical layer secrecy approaches will enable the exchange of confidential messages over a wireless medium in the presence of unauthorized eavesdroppers, without using any secret keys. However, physical layer security approaches are typically feasible only when the source-eavesdropper channel is weaker than the source-destination channel. Cooperative jamming can be used to overcome this challenge and increase the secrecy rate. In this paper, the security of two-phase relaying system with multiple intermediate nodes and in the presence of an eavesdropper is investigated. To enhance the system secrecy rate, a joint cooperative beamforming and jamming combined with relay and jammer selections is proposed. In phase I, the source node broadcasts a signal to relays while three intermediate nodes (which act as jammers) help the source node by transmitting random jamming signals to confuse the eavesdropper. Since the friendly (cooperative) jammers create interference for both the intended relays and the eavesdropper, optimal beamforming is applied such that no interference is caused at two preselected desired relays (that are going to receive the confidential massage in phase I). In phase II, two preselected relays transmit the source message with beamforming coefficients such that the received signal at the eavesdropper is completely nulled out. Our goal in this paper is to minimize the received SNR at the eavesdropper while increasing it at the destination as much as possible by applying different methods such as cooperative beamforming, cooperative jamming and relay selection. To avoid operational complexity, we consider the minimum number of intermediate nodes that are necessary without losing the performance. Numerical results demonstrate the advantage of our proposed scheme compared with the scheme with no cooperative jamming.
This paper exploits physical layer network coding (PNC) and friendly jamming to improve their physical layer security in wireless two-hop cooperative communications, consisting of one source-destination pair with the help of multiple intermediate nodes in the presence of one eavesdropper. By sending a jamming signal carrying a random binary message from the selected jammer and utilizing the PNC at the selected relay node, the system can avoid the disadvantage of the friendly jamming to the source-relay channel and do good to the relay-destination channel, thereby achieving better secrecy rate. Assuming global channel state information available and memoryless adversaries, we seek to minimize the secrecy outage probability with the optimal relay and jammer selection. Numerical simulation results show that our schemes outperform the conventional approaches in wireless cooperative communications.
In a cooperative wireless network, we exploited node cooperation for achieving physical layer based security. In this paper, the case of one source-destination pair with the help of multiple cooperating nodes(relay nodes and jamming nodes) in the presence of one eavesdropper was considered to improve the performance of secure wireless communications. A novel cooperative scheme joint decode-and-forward and cooperative jamming(JDFCJ) was proposed. In this scheme, the relay nodes transmit a weighted version of the source signals and the jamming nodes just transmit a common weighted jamming signal to confound the eavesdropper. The novel system design is proposed to minimize the transmit power subject to a secrecy rate constraint. For JDFCJ, the optimal power allocation is obtained in closed-form in the condition of the complete nulling of jamming signals at the destination. The numerical evaluation of the transmit power results shows that the proposed scheme can significantly improve the performance of secure wireless communications, as compared to the DF scheme.
In this paper, we investigate physical layer network coding (PNC) and destination assisted cooperative jamming (DACJ) for physical layer security in wireless sensor networks, in which there is one source, one destination, a cluster of intermediate nodes, and multiple eavesdroppers. Under the PNC protocol, the considered two-hop wireless sensor network implements a complete transmission process in two phases. In the first phase, through sending a jamming signal from the destination and exploiting the PNC at the relay, the relay decodes the exclusive-OR (XOR) performed form of the source and the jamming message. Therefore, the jamming signal can degrade the wire-tap channels without hampering the legitimate channel. In the second phase, the relay transmits the re-encoded message to the destination while eavesdroppers are out of work as they cannot extract information from the signal. Thus, the proposed design can significantly improve the performance of secure wireless communications. Meanwhile, the proposed schemes select one optimal node from the intermediate nodes and give an optimal solution of power allocation to maximize secrecy capacity. Numerical simulation results show that the proposed schemes have a better and more stable secrecy performance than the conventional schemes at the same power consumption.