Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Characterization of Josephson devices for use in quantum computation

Sudeep Dutta

Published Nov 28, 2006• 3 citations
OpenAlex

Abstract

This thesis examines Josephson tunnel junctions as candidate qubits for quantum computation. A large area current-biased junction, known as a phase qubit, uses the two lowest energy levels in a tilted washboard potential as the qubit states |0> and |1>. I performed experiments with 10 x 10 um^2 Nb/AlOx/Nb qubit junctions, with critical currents of roughly 30 uA. The state of a device was initialized by cooling below 50 mK in a dilution refrigerator. In order for quantum mechanical superpositions to be long-lived, it is necessary to isolate the junction from noisy bias leads that originate at room temperature. I studied two types of isolation: an LC filter, and a broadband scheme that used an auxiliary junction, resulting in a dc SQUID. One of the main goals of this work was to determine how well a simple Hamiltonian, derived assuming just a few lumped elements, describes the observed behavior of a macroscopic Josephson device, including coherent dynamics such as Rabi oscillations. I did this by comparing results to the expected behavior of ideal two-level systems and with more detailed master equation and density matrix simulations. I performed state manipulation by applying dc bias currents and resonant microwave currents, and through temperature control. The tunneling escape rate of the junction from the states |0> and |1> (zero voltage) to the running state (finite voltage) depends on the occupation probability of the energy levels and served as state readout. Experiments to measure the relaxation time T1 between |1> and |0> were performed by examining the dependence of the escape rate with temperature, yielding a maximum T1 = 15 ns. Measuring the decay to the ground state after applying a microwave pulse revealed at least two time constants, one of about 10 ns and another as long as 50 ns. The spectroscopic coherence time T2* was estimated to be roughly 5 ns by measuring resonance widths and the decay envelope of coherent Rabi oscillations was found to have a time constant T' = 10 ns over a wide range of conditions.

Related papers

Quantum Computing with Josephson Junction Circuits

Huizhong Xu

This work concerns the study of Josephson junction circuits in the context of their usability for quantum computing. The zero-voltage state of a current-biased Josephson junction has a set of metastable quantum energy levels. If a junction is well isolated from its environment, it will be possible to use the two lowest states as a qubit in a quantum computer. I first examine the meaning of isolation theoretically. Using a master equation, I analyzed the effect of dissipation on escape rates and suggested a simple method, population depletion technique, to measure the relaxation time. Using a stochastic Bloch equation to analyze microwave resonance shapes, I found a relation between current noise induced decoherence and the noise spectrum. I then analyze and test a few qubit isolation schemes, including resistive isolation, inductor-capacitor (LC) isolation, and inductor-junction (LJ) isolation. I found the resistive isolation scheme has a severe heating problem. Macroscopic quantum tunneling and energy level quantization were observed in the LC isolated junction qubits at 25 mK. Relaxation times of 4-12 ns and spectroscopic coherence times of 1-3 ns were obtained for these LC isolated qubits. I measured a relaxation time of 50 ns and a spectroscopic coherence time of 5-8 ns for the LJ isolated junction qubit. Both times are much longer than those of the LC isolated qubits. Rabi oscillations were also observed on this sample with a decay time of around 10 ns. Using microwave spectroscopy techniques, I probed quantum phenomena in a coupled macroscopic three-qubit system that is comprised of two Nb/AlOx/Nb Josephson junctions and an LC resonator. The measured spectrum at 25 mK in the frequency range 4-15 GHz agrees well with quantum mechanical calculations, consistent with the existence of entangled states between the three degrees of freedom. These entangled states and a first-order strong coupling between two junction qubits open the possibility of using a resonator as a data bus for information storage and manipulation in a multi-qubit system. The measurements also demonstrate spectroscopy is a powerful tool and can be used to study a composite system with many qubits.

•Aug 27, 2004•4 citations

dc SQUID Phase Qubit

Tauno Palomaki

This thesis examines the behavior of dc SQUID phase qubits in terms of their proposed use in a quantum computer. In a phase qubit, the two lowest energy states (n=0 and n=1) of a current-biased Josephson junction form the qubit states, with the gauge invariant phase difference across the junction being relatively well defined. In a dc SQUID phase qubit, the Josephson junction is isolated from the environment using an inductive isolation network and Josephson junction, which are connected across the phase qubit junction to form a dc SQUID. Five dc SQUID phase qubits were examined at temperatures down to 25 mK. Three of the devices had qubit junctions that were Nb/AlOx/Nb junctions with critical currents of roughly 30 microamps. The other two had Al/AlOx/Al junctions with critical currents of roughly 1.3 microamps. The device that had the best performance was an Al/AlOx/Al device with a relaxation time of 30 ns and a coherence time of 24 ns. The devices were characterized using microwave spectroscopy, Rabi oscillations, relaxation and Ramsey fringe measurements. I was also able to see coupling between two Nb/AlOx/Nb dc SQUID phase qubits and perform Rabi oscillations with them. The Nb/AlOx/Nb devices had a relaxation time and coherence time that were half that of the Al/AlOx/Al device. One of the goals of this work was to understand the nature of parasitic quantum systems (TLSs) that interact with the qubit. Coupling between a TLS and a qubit causes an avoided level crossing in the transition spectrum of the qubit. In the Al/AlOx/Al devices unintentional avoided level crossings were visible with sizes up to 240 MHz, although most visible splittings were of order ~20 MHz. The measured spectra were compared to a model of the avoided level crossing based on the TLSs coupling to the junction, through either the critical current or the voltage across the junction.

•Aug 6, 2008•2 citations

A Josephson junction qubit

A. J. Berkley

I studied the Josephson junction system in the context of its usability for quan-tum computation. The zero-voltage state of a Josephson junction biased with constant current has a set of metastable quantum energy levels. In principle, it should be possible to use the two lowest states as a qubit for a quantum computer, provided both the dissipation time and coherence time of this qubit can be made long enough. I describe two methods for isolating a Josephson junction to increase its dissipation time. The rst is a resistive isolation scheme, for which I fabricated and measured a prototype system. I discuss the results of these measurements and show that the constraints of heating in conjunction with high-frequency design require-ments make it unlikely that this isolation method will lead to the coherence times required for quantum computation. I then discuss a resonant isolation method that I used to successfully increase the dissipation time of a Josephson junction qubit. I performed spectroscopic mea-surements at low temperatures to nd the coherence time of resonantly isolated 100 m2 Al/AlOx/Al and Nb/AlOx/Nb junctions with critical currents of roughly 10 A. The results of these measurements reveal two mechanisms beyond spontaneous emission for decoherence: low-frequency current noise and tunneling to the voltage state. To explain these results on decoherence, I present a model based on the Bloch equations. Going beyond a single qubit, I designed a capacitively coupled two-qubit system. Using spectroscopy, I showed that the energy level spacings between the ground state and the excited entangled states of the system agree with those calculated from the Schrodinger equation.

•Jan 1, 2003•2 citations

Decoherence in a Josephson-junction qubit

A. J. Berkley, H. Xu, M. A. Gubrud +4 more

The zero-voltage state of a Josephson junction biased with constant current consists of a set of metastable quantum energy levels. We probe the spacings of these levels by using microwaves to induce transitions and thereby enhance the escape rate to the voltage state. The widths of the resonances give a measurement of the spectroscopic coherence time of the two metastable states involved in the transitions. We observe a decoherence time shorter than that expected from dissipation alone in resonantly isolated $20\ifmmode\times\else\texttimes\fi{}5\ensuremath{\mu}{\mathrm{m}}^{2}$ area $\mathrm{Al}/\mathrm{AlO}x/\mathrm{Al}$ junctions at 60 mK. The data are well fit by a model that includes the dephasing effects of both low-frequency current noise and the escape rate to the voltage state. We discuss implications for quantum computation using current-biased Josephson-junction qubits, including limits on the minimum number of levels needed in the well.

arXiv:quant-ph/0303001•Physical review. B, Condensed matter•Aug 18, 2003•50 citations

Quantum Coherent Dynamics in a dc SQUID Phase Qubit Using an LC Filter

Hyeokshin Kwon

A dc SQUID phase qubit consists of two Josephson junctions in a loop. One junction acts as a qubit with two lowest energy levels forming the |0> and |1> status. The second junction and the loop inductance act to isolate the qubit junction from noise. In this thesis, I report on the improvement of the relaxation time and the coherence time in a dc SQUID phase qubit that used an LC filter. I also report the measurement of anomalous switching curves. In order to improve the relaxation and coherence times, I used two isolation networks, an LC isolation network and an inductive isolation network, to decouple the device from the current bias lines. This produced a very large total effective resistance of the input leads that increases the relaxation time of the qubit. In addition, I connected a low-loss SiNx shunting capacitor across the qubit junction to reduce dielectric losses. I measured two dc SQUID phase qubits. Device DS6 had a 4 (μm)2 Al/AlOx/Al qubit junction with a critical current of 0.5 μA and a 1 pF shunting capacitor. It used an LC filter made from a 10 nH inductor and a 145 pF capacitor. The capacitors contained N-H rich SiNx which produced a loss tangent of about 7×10 -4 . Device DS8 had a 2 (μm)2 Al/AlOx/Al qubit junction with a critical current of 77 nA and an LC filter similar to the first one. The shunting capacitor contained Si-H rich SiNx. Using a pulse readout technique, I measured the characteristics of the qubits, including the transition spectrum, Rabi oscillations, relaxation, Ramsey fringes and state tomography. The best relaxation time T1 for device DS6 was 32 ns and 280 ns for device DS8. The best Rabi decay time T' for DS6 was 42 ns while for device DS8 it was 120 ns. From these and other data I obtained estimates for the best coherence time T2 in device DS6 of 61 ns and 76 ns in device DS8. In DS8, I observed anomalous switching curves; i.e. switching curves which were qualitatively different from conventional switching curves. In the conventional case, the switching curve for the superposition state is the weighted sum of the |0> and |1> curves, but it was not in device DS8. Instead, the switching curve shifted along the current axis as the exited state probability increased. I present a model for understanding the behavior and use this model to extract the probability to be in the excited state.

•Jan 1, 2010•0 citations

Determination of relaxation time of a Josephson junction qubit

S. K. Dutta, Haitan Xu, A. J. Berkley +5 more

When a Josephson junction in the zero-voltage state is current-biased below its critical current, the rate that it escapes to the finite-voltage state depends on the quantum state of the junction. By employing a slow current sweep, it is possible to observe experimentally the emptying of the thermally populated first excited level as a well-defined feature in the escape rate. This feature provides a simple method of determining the junction's energy relaxation time ${T}_{1}$, a key parameter for evaluating its utility for quantum computation. We discuss the temperature regime where this effect is readily observable and describe how the emptying depends directly on the relaxation time. Our model of the junction dynamics agrees well with the measured escape rate of a $10\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{m}\ifmmode\times\else\texttimes\fi{}10\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{m}$ $\mathrm{Nb}\text{\ensuremath{-}}\mathrm{AlOx}\text{\ensuremath{-}}\mathrm{Nb}$ device in the 25 to $300\phantom{\rule{0.3em}{0ex}}\mathrm{mK}$ temperature range, yielding ${T}_{1}\ensuremath{\approx}4\phantom{\rule{0.3em}{0ex}}\mathrm{ns}$.

Physical Review B•Oct 7, 2004•12 citations
This thesis examines Josephson tunnel junctions as candidate qubits for quantum computation. A large area current-biased junction, known as a phase qubit, uses the two lowest energy levels in a tilted washboard potential as the qubit states |0> and |1>. I performed experiments with 10 x 10 um^2 Nb/AlOx/Nb qubit junctions, with critical currents of roughly 30 uA. The state of a device was initialized by cooling below 50 mK in a dilution refrigerator. In order for quantum mechanical superpositions to be long-lived, it is necessary to isolate the junction from noisy bias leads that originate at room temperature. I studied two types of isolation: an LC filter, and a broadband scheme that used an auxiliary junction, resulting in a dc SQUID. One of the main goals of this work was to determine how well a simple Hamiltonian, derived assuming just a few lumped elements, describes the observed behavior of a macroscopic Josephson device, including coherent dynamics such as Rabi oscillations. I did this by comparing results to the expected behavior of ideal two-level systems and with more detailed master equation and density matrix simulations. I performed state manipulation by applying dc bias currents and resonant microwave currents, and through temperature control. The tunneling escape rate of the junction from the states |0> and |1> (zero voltage) to the running state (finite voltage) depends on the occupation probability of the energy levels and served as state readout. Experiments to measure the relaxation time T1 between |1> and |0> were performed by examining the dependence of the escape rate with temperature, yielding a maximum T1 = 15 ns. Measuring the decay to the ground state after applying a microwave pulse revealed at least two time constants, one of about 10 ns and another as long as 50 ns. The spectroscopic coherence time T2* was estimated to be roughly 5 ns by measuring resonance widths and the decay envelope of coherent Rabi oscillations was found to have a time constant T' = 10 ns over a wide range of conditions.
This work concerns the study of Josephson junction circuits in the context of their usability for quantum computing. The zero-voltage state of a current-biased Josephson junction has a set of metastable quantum energy levels. If a junction is well isolated from its environment, it will be possible to use the two lowest states as a qubit in a quantum computer. I first examine the meaning of isolation theoretically. Using a master equation, I analyzed the effect of dissipation on escape rates and suggested a simple method, population depletion technique, to measure the relaxation time. Using a stochastic Bloch equation to analyze microwave resonance shapes, I found a relation between current noise induced decoherence and the noise spectrum. I then analyze and test a few qubit isolation schemes, including resistive isolation, inductor-capacitor (LC) isolation, and inductor-junction (LJ) isolation. I found the resistive isolation scheme has a severe heating problem. Macroscopic quantum tunneling and energy level quantization were observed in the LC isolated junction qubits at 25 mK. Relaxation times of 4-12 ns and spectroscopic coherence times of 1-3 ns were obtained for these LC isolated qubits. I measured a relaxation time of 50 ns and a spectroscopic coherence time of 5-8 ns for the LJ isolated junction qubit. Both times are much longer than those of the LC isolated qubits. Rabi oscillations were also observed on this sample with a decay time of around 10 ns. Using microwave spectroscopy techniques, I probed quantum phenomena in a coupled macroscopic three-qubit system that is comprised of two Nb/AlOx/Nb Josephson junctions and an LC resonator. The measured spectrum at 25 mK in the frequency range 4-15 GHz agrees well with quantum mechanical calculations, consistent with the existence of entangled states between the three degrees of freedom. These entangled states and a first-order strong coupling between two junction qubits open the possibility of using a resonator as a data bus for information storage and manipulation in a multi-qubit system. The measurements also demonstrate spectroscopy is a powerful tool and can be used to study a composite system with many qubits.
This thesis examines the behavior of dc SQUID phase qubits in terms of their proposed use in a quantum computer. In a phase qubit, the two lowest energy states (n=0 and n=1) of a current-biased Josephson junction form the qubit states, with the gauge invariant phase difference across the junction being relatively well defined. In a dc SQUID phase qubit, the Josephson junction is isolated from the environment using an inductive isolation network and Josephson junction, which are connected across the phase qubit junction to form a dc SQUID. Five dc SQUID phase qubits were examined at temperatures down to 25 mK. Three of the devices had qubit junctions that were Nb/AlOx/Nb junctions with critical currents of roughly 30 microamps. The other two had Al/AlOx/Al junctions with critical currents of roughly 1.3 microamps. The device that had the best performance was an Al/AlOx/Al device with a relaxation time of 30 ns and a coherence time of 24 ns. The devices were characterized using microwave spectroscopy, Rabi oscillations, relaxation and Ramsey fringe measurements. I was also able to see coupling between two Nb/AlOx/Nb dc SQUID phase qubits and perform Rabi oscillations with them. The Nb/AlOx/Nb devices had a relaxation time and coherence time that were half that of the Al/AlOx/Al device. One of the goals of this work was to understand the nature of parasitic quantum systems (TLSs) that interact with the qubit. Coupling between a TLS and a qubit causes an avoided level crossing in the transition spectrum of the qubit. In the Al/AlOx/Al devices unintentional avoided level crossings were visible with sizes up to 240 MHz, although most visible splittings were of order ~20 MHz. The measured spectra were compared to a model of the avoided level crossing based on the TLSs coupling to the junction, through either the critical current or the voltage across the junction.
I studied the Josephson junction system in the context of its usability for quan-tum computation. The zero-voltage state of a Josephson junction biased with constant current has a set of metastable quantum energy levels. In principle, it should be possible to use the two lowest states as a qubit for a quantum computer, provided both the dissipation time and coherence time of this qubit can be made long enough. I describe two methods for isolating a Josephson junction to increase its dissipation time. The rst is a resistive isolation scheme, for which I fabricated and measured a prototype system. I discuss the results of these measurements and show that the constraints of heating in conjunction with high-frequency design require-ments make it unlikely that this isolation method will lead to the coherence times required for quantum computation. I then discuss a resonant isolation method that I used to successfully increase the dissipation time of a Josephson junction qubit. I performed spectroscopic mea-surements at low temperatures to nd the coherence time of resonantly isolated 100 m2 Al/AlOx/Al and Nb/AlOx/Nb junctions with critical currents of roughly 10 A. The results of these measurements reveal two mechanisms beyond spontaneous emission for decoherence: low-frequency current noise and tunneling to the voltage state. To explain these results on decoherence, I present a model based on the Bloch equations. Going beyond a single qubit, I designed a capacitively coupled two-qubit system. Using spectroscopy, I showed that the energy level spacings between the ground state and the excited entangled states of the system agree with those calculated from the Schrodinger equation.
The zero-voltage state of a Josephson junction biased with constant current consists of a set of metastable quantum energy levels. We probe the spacings of these levels by using microwaves to induce transitions and thereby enhance the escape rate to the voltage state. The widths of the resonances give a measurement of the spectroscopic coherence time of the two metastable states involved in the transitions. We observe a decoherence time shorter than that expected from dissipation alone in resonantly isolated $20\ifmmode\times\else\texttimes\fi{}5\ensuremath{\mu}{\mathrm{m}}^{2}$ area Al/AlOx/Al\mathrm{Al}/\mathrm{AlO}x/\mathrm{Al}Al/AlOx/Al junctions at 60 mK. The data are well fit by a model that includes the dephasing effects of both low-frequency current noise and the escape rate to the voltage state. We discuss implications for quantum computation using current-biased Josephson-junction qubits, including limits on the minimum number of levels needed in the well.
A dc SQUID phase qubit consists of two Josephson junctions in a loop. One junction acts as a qubit with two lowest energy levels forming the |0> and |1> status. The second junction and the loop inductance act to isolate the qubit junction from noise. In this thesis, I report on the improvement of the relaxation time and the coherence time in a dc SQUID phase qubit that used an LC filter. I also report the measurement of anomalous switching curves. In order to improve the relaxation and coherence times, I used two isolation networks, an LC isolation network and an inductive isolation network, to decouple the device from the current bias lines. This produced a very large total effective resistance of the input leads that increases the relaxation time of the qubit. In addition, I connected a low-loss SiNx shunting capacitor across the qubit junction to reduce dielectric losses. I measured two dc SQUID phase qubits. Device DS6 had a 4 (μm)2 Al/AlOx/Al qubit junction with a critical current of 0.5 μA and a 1 pF shunting capacitor. It used an LC filter made from a 10 nH inductor and a 145 pF capacitor. The capacitors contained N-H rich SiNx which produced a loss tangent of about 7×10 -4 . Device DS8 had a 2 (μm)2 Al/AlOx/Al qubit junction with a critical current of 77 nA and an LC filter similar to the first one. The shunting capacitor contained Si-H rich SiNx. Using a pulse readout technique, I measured the characteristics of the qubits, including the transition spectrum, Rabi oscillations, relaxation, Ramsey fringes and state tomography. The best relaxation time T1 for device DS6 was 32 ns and 280 ns for device DS8. The best Rabi decay time T' for DS6 was 42 ns while for device DS8 it was 120 ns. From these and other data I obtained estimates for the best coherence time T2 in device DS6 of 61 ns and 76 ns in device DS8. In DS8, I observed anomalous switching curves; i.e. switching curves which were qualitatively different from conventional switching curves. In the conventional case, the switching curve for the superposition state is the weighted sum of the |0> and |1> curves, but it was not in device DS8. Instead, the switching curve shifted along the current axis as the exited state probability increased. I present a model for understanding the behavior and use this model to extract the probability to be in the excited state.
When a Josephson junction in the zero-voltage state is current-biased below its critical current, the rate that it escapes to the finite-voltage state depends on the quantum state of the junction. By employing a slow current sweep, it is possible to observe experimentally the emptying of the thermally populated first excited level as a well-defined feature in the escape rate. This feature provides a simple method of determining the junction's energy relaxation time T1{T}_{1}T1​, a key parameter for evaluating its utility for quantum computation. We discuss the temperature regime where this effect is readily observable and describe how the emptying depends directly on the relaxation time. Our model of the junction dynamics agrees well with the measured escape rate of a $10\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{m}\ifmmode\times\else\texttimes\fi{}10\phantom{\rule{0.3em}{0ex}}\ensuremath{\mu}\mathrm{m}$ $\mathrm{Nb}\text{\ensuremath{-}}\mathrm{AlOx}\text{\ensuremath{-}}\mathrm{Nb}$ device in the 25 to 300mK300\phantom{\rule{0.3em}{0ex}}\mathrm{mK}300mK temperature range, yielding ${T}_{1}\ensuremath{\approx}4\phantom{\rule{0.3em}{0ex}}\mathrm{ns}$.