Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

A Josephson junction qubit

A. J. Berkley

Published Jan 1, 2003• 2 citations
OpenAlex

Abstract

I studied the Josephson junction system in the context of its usability for quan-tum computation. The zero-voltage state of a Josephson junction biased with constant current has a set of metastable quantum energy levels. In principle, it should be possible to use the two lowest states as a qubit for a quantum computer, provided both the dissipation time and coherence time of this qubit can be made long enough. I describe two methods for isolating a Josephson junction to increase its dissipation time. The rst is a resistive isolation scheme, for which I fabricated and measured a prototype system. I discuss the results of these measurements and show that the constraints of heating in conjunction with high-frequency design require-ments make it unlikely that this isolation method will lead to the coherence times required for quantum computation. I then discuss a resonant isolation method that I used to successfully increase the dissipation time of a Josephson junction qubit. I performed spectroscopic mea-surements at low temperatures to nd the coherence time of resonantly isolated 100 m2 Al/AlOx/Al and Nb/AlOx/Nb junctions with critical currents of roughly 10 A. The results of these measurements reveal two mechanisms beyond spontaneous emission for decoherence: low-frequency current noise and tunneling to the voltage state. To explain these results on decoherence, I present a model based on the Bloch equations. Going beyond a single qubit, I designed a capacitively coupled two-qubit system. Using spectroscopy, I showed that the energy level spacings between the ground state and the excited entangled states of the system agree with those calculated from the Schrodinger equation.

Related papers

Quantum Computing with Josephson Junction Circuits

Huizhong Xu

This work concerns the study of Josephson junction circuits in the context of their usability for quantum computing. The zero-voltage state of a current-biased Josephson junction has a set of metastable quantum energy levels. If a junction is well isolated from its environment, it will be possible to use the two lowest states as a qubit in a quantum computer. I first examine the meaning of isolation theoretically. Using a master equation, I analyzed the effect of dissipation on escape rates and suggested a simple method, population depletion technique, to measure the relaxation time. Using a stochastic Bloch equation to analyze microwave resonance shapes, I found a relation between current noise induced decoherence and the noise spectrum. I then analyze and test a few qubit isolation schemes, including resistive isolation, inductor-capacitor (LC) isolation, and inductor-junction (LJ) isolation. I found the resistive isolation scheme has a severe heating problem. Macroscopic quantum tunneling and energy level quantization were observed in the LC isolated junction qubits at 25 mK. Relaxation times of 4-12 ns and spectroscopic coherence times of 1-3 ns were obtained for these LC isolated qubits. I measured a relaxation time of 50 ns and a spectroscopic coherence time of 5-8 ns for the LJ isolated junction qubit. Both times are much longer than those of the LC isolated qubits. Rabi oscillations were also observed on this sample with a decay time of around 10 ns. Using microwave spectroscopy techniques, I probed quantum phenomena in a coupled macroscopic three-qubit system that is comprised of two Nb/AlOx/Nb Josephson junctions and an LC resonator. The measured spectrum at 25 mK in the frequency range 4-15 GHz agrees well with quantum mechanical calculations, consistent with the existence of entangled states between the three degrees of freedom. These entangled states and a first-order strong coupling between two junction qubits open the possibility of using a resonator as a data bus for information storage and manipulation in a multi-qubit system. The measurements also demonstrate spectroscopy is a powerful tool and can be used to study a composite system with many qubits.

•Aug 27, 2004•4 citations

Decoherence in a Josephson-junction qubit

A. J. Berkley, H. Xu, M. A. Gubrud +4 more

The zero-voltage state of a Josephson junction biased with constant current consists of a set of metastable quantum energy levels. We probe the spacings of these levels by using microwaves to induce transitions and thereby enhance the escape rate to the voltage state. The widths of the resonances give a measurement of the spectroscopic coherence time of the two metastable states involved in the transitions. We observe a decoherence time shorter than that expected from dissipation alone in resonantly isolated $20\ifmmode\times\else\texttimes\fi{}5\ensuremath{\mu}{\mathrm{m}}^{2}$ area $\mathrm{Al}/\mathrm{AlO}x/\mathrm{Al}$ junctions at 60 mK. The data are well fit by a model that includes the dephasing effects of both low-frequency current noise and the escape rate to the voltage state. We discuss implications for quantum computation using current-biased Josephson-junction qubits, including limits on the minimum number of levels needed in the well.

arXiv:quant-ph/0303001•Physical review. B, Condensed matter•Aug 18, 2003•50 citations

Characterization of Josephson devices for use in quantum computation

Sudeep Dutta

This thesis examines Josephson tunnel junctions as candidate qubits for quantum computation. A large area current-biased junction, known as a phase qubit, uses the two lowest energy levels in a tilted washboard potential as the qubit states |0> and |1>. I performed experiments with 10 x 10 um^2 Nb/AlOx/Nb qubit junctions, with critical currents of roughly 30 uA. The state of a device was initialized by cooling below 50 mK in a dilution refrigerator. In order for quantum mechanical superpositions to be long-lived, it is necessary to isolate the junction from noisy bias leads that originate at room temperature. I studied two types of isolation: an LC filter, and a broadband scheme that used an auxiliary junction, resulting in a dc SQUID. One of the main goals of this work was to determine how well a simple Hamiltonian, derived assuming just a few lumped elements, describes the observed behavior of a macroscopic Josephson device, including coherent dynamics such as Rabi oscillations. I did this by comparing results to the expected behavior of ideal two-level systems and with more detailed master equation and density matrix simulations. I performed state manipulation by applying dc bias currents and resonant microwave currents, and through temperature control. The tunneling escape rate of the junction from the states |0> and |1> (zero voltage) to the running state (finite voltage) depends on the occupation probability of the energy levels and served as state readout. Experiments to measure the relaxation time T1 between |1> and |0> were performed by examining the dependence of the escape rate with temperature, yielding a maximum T1 = 15 ns. Measuring the decay to the ground state after applying a microwave pulse revealed at least two time constants, one of about 10 ns and another as long as 50 ns. The spectroscopic coherence time T2* was estimated to be roughly 5 ns by measuring resonance widths and the decay envelope of coherent Rabi oscillations was found to have a time constant T' = 10 ns over a wide range of conditions.

•Nov 28, 2006•3 citations

Characterization of an LC-isolated Josephson junction qubit

A. J. Berkley, Haitan Xu, M. A. Gubrud +4 more

The energy states of a well-isolated hysteretic Josephson junction in the "phase" regime can be used as a qubit. The state of the junction can be determined by measuring when the junction switches from the zero-voltage (qubit) state to the running voltage state, since different levels have different switching rates. The experimental challenge is to provide sufficient electrical isolation of the junction from wires that must be attached to provide bias current and to measure switching events. This isolation must be effective at frequencies around the energy level spacing, in our case from 3-8 GHz. We report on the design and measurement of isolated moderate-to-high-Q junctions using a resonant isolation scheme of a series inductance and capacitive shunt. Microwave activation measurements of the Al-AlO/sub x/-Al junctions at 70 mK were used to gauge the isolation effectiveness and to show the effect of current noise from the isolation resonance on the junction coherence.

IEEE Transactions on Applied Superconductivity•Jun 1, 2003•6 citations

dc SQUID Phase Qubit

Tauno Palomaki

This thesis examines the behavior of dc SQUID phase qubits in terms of their proposed use in a quantum computer. In a phase qubit, the two lowest energy states (n=0 and n=1) of a current-biased Josephson junction form the qubit states, with the gauge invariant phase difference across the junction being relatively well defined. In a dc SQUID phase qubit, the Josephson junction is isolated from the environment using an inductive isolation network and Josephson junction, which are connected across the phase qubit junction to form a dc SQUID. Five dc SQUID phase qubits were examined at temperatures down to 25 mK. Three of the devices had qubit junctions that were Nb/AlOx/Nb junctions with critical currents of roughly 30 microamps. The other two had Al/AlOx/Al junctions with critical currents of roughly 1.3 microamps. The device that had the best performance was an Al/AlOx/Al device with a relaxation time of 30 ns and a coherence time of 24 ns. The devices were characterized using microwave spectroscopy, Rabi oscillations, relaxation and Ramsey fringe measurements. I was also able to see coupling between two Nb/AlOx/Nb dc SQUID phase qubits and perform Rabi oscillations with them. The Nb/AlOx/Nb devices had a relaxation time and coherence time that were half that of the Al/AlOx/Al device. One of the goals of this work was to understand the nature of parasitic quantum systems (TLSs) that interact with the qubit. Coupling between a TLS and a qubit causes an avoided level crossing in the transition spectrum of the qubit. In the Al/AlOx/Al devices unintentional avoided level crossings were visible with sizes up to 240 MHz, although most visible splittings were of order ~20 MHz. The measured spectra were compared to a model of the avoided level crossing based on the TLSs coupling to the junction, through either the critical current or the voltage across the junction.

•Aug 6, 2008•2 citations

Josephson vortex quantum bits: Decoherence and entanglement

Ramesh P. Dhungana

In this dissertation work, I investigate the decoherence time of a Josephson vortex qubit (JVQ) and the level of entanglement between two JVQs. A JVQ may be fabricated by embedding two closely spaced microresistors in the insulating layer of a long Josephson junction (LJJ). The phase dynamics of the JVQ may be described by using the perturbed sine-Gordon equation. This sine-Gordon equation is transformed to describe the motion of fluxons in the double-well potential. An oscillation of a fluxon in this double-well potential is mapped onto a quantum two-state system. The coherent oscillation of fluxons in the two-state system decays due to dissipation and noises in the LJJ. To estimate the decoherence time, the two-state system in a noisy environment is described by using the spin-boson Hamiltonian. The time evolution of the system is studied by using the generalized master equation. Finally, I use the experimental parameters for Nb-AlOx-Nb Josephson junction to estimate the decoherence time. The result shows that JVQ has a very long decoherence time (several tens of microseconds) compared to other Josephson qubits. Entanglement between two coupled JVQs is estimated by computing the concurrence. The concurrence depends on the ground-state energy splitting due to the one-fluxon and two-fluxon tunneling between the potential minima of the two coupled JVQs. The tunneling amplitude between the potential minima depends on the junction parameters such as magnetic induction effect S, the separation distance ℓ, and the pinning strength of the microresistors ϵ. The estimation of the concurrence shows that a near perfect entanglement may be achieved by using the experimentally accessible values of the parameters. Also the study shows that the tunneling amplitude of the fluxon between the potential minima of the JVQs may be increased by coupling the junction with a resonant cavity. This characteristic of the junction-cavity coupling may be exploited to control the entanglement between two JVQs.

•Jan 1, 2009•0 citations
I studied the Josephson junction system in the context of its usability for quan-tum computation. The zero-voltage state of a Josephson junction biased with constant current has a set of metastable quantum energy levels. In principle, it should be possible to use the two lowest states as a qubit for a quantum computer, provided both the dissipation time and coherence time of this qubit can be made long enough. I describe two methods for isolating a Josephson junction to increase its dissipation time. The rst is a resistive isolation scheme, for which I fabricated and measured a prototype system. I discuss the results of these measurements and show that the constraints of heating in conjunction with high-frequency design require-ments make it unlikely that this isolation method will lead to the coherence times required for quantum computation. I then discuss a resonant isolation method that I used to successfully increase the dissipation time of a Josephson junction qubit. I performed spectroscopic mea-surements at low temperatures to nd the coherence time of resonantly isolated 100 m2 Al/AlOx/Al and Nb/AlOx/Nb junctions with critical currents of roughly 10 A. The results of these measurements reveal two mechanisms beyond spontaneous emission for decoherence: low-frequency current noise and tunneling to the voltage state. To explain these results on decoherence, I present a model based on the Bloch equations. Going beyond a single qubit, I designed a capacitively coupled two-qubit system. Using spectroscopy, I showed that the energy level spacings between the ground state and the excited entangled states of the system agree with those calculated from the Schrodinger equation.
This work concerns the study of Josephson junction circuits in the context of their usability for quantum computing. The zero-voltage state of a current-biased Josephson junction has a set of metastable quantum energy levels. If a junction is well isolated from its environment, it will be possible to use the two lowest states as a qubit in a quantum computer. I first examine the meaning of isolation theoretically. Using a master equation, I analyzed the effect of dissipation on escape rates and suggested a simple method, population depletion technique, to measure the relaxation time. Using a stochastic Bloch equation to analyze microwave resonance shapes, I found a relation between current noise induced decoherence and the noise spectrum. I then analyze and test a few qubit isolation schemes, including resistive isolation, inductor-capacitor (LC) isolation, and inductor-junction (LJ) isolation. I found the resistive isolation scheme has a severe heating problem. Macroscopic quantum tunneling and energy level quantization were observed in the LC isolated junction qubits at 25 mK. Relaxation times of 4-12 ns and spectroscopic coherence times of 1-3 ns were obtained for these LC isolated qubits. I measured a relaxation time of 50 ns and a spectroscopic coherence time of 5-8 ns for the LJ isolated junction qubit. Both times are much longer than those of the LC isolated qubits. Rabi oscillations were also observed on this sample with a decay time of around 10 ns. Using microwave spectroscopy techniques, I probed quantum phenomena in a coupled macroscopic three-qubit system that is comprised of two Nb/AlOx/Nb Josephson junctions and an LC resonator. The measured spectrum at 25 mK in the frequency range 4-15 GHz agrees well with quantum mechanical calculations, consistent with the existence of entangled states between the three degrees of freedom. These entangled states and a first-order strong coupling between two junction qubits open the possibility of using a resonator as a data bus for information storage and manipulation in a multi-qubit system. The measurements also demonstrate spectroscopy is a powerful tool and can be used to study a composite system with many qubits.
The zero-voltage state of a Josephson junction biased with constant current consists of a set of metastable quantum energy levels. We probe the spacings of these levels by using microwaves to induce transitions and thereby enhance the escape rate to the voltage state. The widths of the resonances give a measurement of the spectroscopic coherence time of the two metastable states involved in the transitions. We observe a decoherence time shorter than that expected from dissipation alone in resonantly isolated $20\ifmmode\times\else\texttimes\fi{}5\ensuremath{\mu}{\mathrm{m}}^{2}$ area Al/AlOx/Al\mathrm{Al}/\mathrm{AlO}x/\mathrm{Al}Al/AlOx/Al junctions at 60 mK. The data are well fit by a model that includes the dephasing effects of both low-frequency current noise and the escape rate to the voltage state. We discuss implications for quantum computation using current-biased Josephson-junction qubits, including limits on the minimum number of levels needed in the well.
This thesis examines Josephson tunnel junctions as candidate qubits for quantum computation. A large area current-biased junction, known as a phase qubit, uses the two lowest energy levels in a tilted washboard potential as the qubit states |0> and |1>. I performed experiments with 10 x 10 um^2 Nb/AlOx/Nb qubit junctions, with critical currents of roughly 30 uA. The state of a device was initialized by cooling below 50 mK in a dilution refrigerator. In order for quantum mechanical superpositions to be long-lived, it is necessary to isolate the junction from noisy bias leads that originate at room temperature. I studied two types of isolation: an LC filter, and a broadband scheme that used an auxiliary junction, resulting in a dc SQUID. One of the main goals of this work was to determine how well a simple Hamiltonian, derived assuming just a few lumped elements, describes the observed behavior of a macroscopic Josephson device, including coherent dynamics such as Rabi oscillations. I did this by comparing results to the expected behavior of ideal two-level systems and with more detailed master equation and density matrix simulations. I performed state manipulation by applying dc bias currents and resonant microwave currents, and through temperature control. The tunneling escape rate of the junction from the states |0> and |1> (zero voltage) to the running state (finite voltage) depends on the occupation probability of the energy levels and served as state readout. Experiments to measure the relaxation time T1 between |1> and |0> were performed by examining the dependence of the escape rate with temperature, yielding a maximum T1 = 15 ns. Measuring the decay to the ground state after applying a microwave pulse revealed at least two time constants, one of about 10 ns and another as long as 50 ns. The spectroscopic coherence time T2* was estimated to be roughly 5 ns by measuring resonance widths and the decay envelope of coherent Rabi oscillations was found to have a time constant T' = 10 ns over a wide range of conditions.
The energy states of a well-isolated hysteretic Josephson junction in the "phase" regime can be used as a qubit. The state of the junction can be determined by measuring when the junction switches from the zero-voltage (qubit) state to the running voltage state, since different levels have different switching rates. The experimental challenge is to provide sufficient electrical isolation of the junction from wires that must be attached to provide bias current and to measure switching events. This isolation must be effective at frequencies around the energy level spacing, in our case from 3-8 GHz. We report on the design and measurement of isolated moderate-to-high-Q junctions using a resonant isolation scheme of a series inductance and capacitive shunt. Microwave activation measurements of the Al-AlO/sub x/-Al junctions at 70 mK were used to gauge the isolation effectiveness and to show the effect of current noise from the isolation resonance on the junction coherence.
This thesis examines the behavior of dc SQUID phase qubits in terms of their proposed use in a quantum computer. In a phase qubit, the two lowest energy states (n=0 and n=1) of a current-biased Josephson junction form the qubit states, with the gauge invariant phase difference across the junction being relatively well defined. In a dc SQUID phase qubit, the Josephson junction is isolated from the environment using an inductive isolation network and Josephson junction, which are connected across the phase qubit junction to form a dc SQUID. Five dc SQUID phase qubits were examined at temperatures down to 25 mK. Three of the devices had qubit junctions that were Nb/AlOx/Nb junctions with critical currents of roughly 30 microamps. The other two had Al/AlOx/Al junctions with critical currents of roughly 1.3 microamps. The device that had the best performance was an Al/AlOx/Al device with a relaxation time of 30 ns and a coherence time of 24 ns. The devices were characterized using microwave spectroscopy, Rabi oscillations, relaxation and Ramsey fringe measurements. I was also able to see coupling between two Nb/AlOx/Nb dc SQUID phase qubits and perform Rabi oscillations with them. The Nb/AlOx/Nb devices had a relaxation time and coherence time that were half that of the Al/AlOx/Al device. One of the goals of this work was to understand the nature of parasitic quantum systems (TLSs) that interact with the qubit. Coupling between a TLS and a qubit causes an avoided level crossing in the transition spectrum of the qubit. In the Al/AlOx/Al devices unintentional avoided level crossings were visible with sizes up to 240 MHz, although most visible splittings were of order ~20 MHz. The measured spectra were compared to a model of the avoided level crossing based on the TLSs coupling to the junction, through either the critical current or the voltage across the junction.
In this dissertation work, I investigate the decoherence time of a Josephson vortex qubit (JVQ) and the level of entanglement between two JVQs. A JVQ may be fabricated by embedding two closely spaced microresistors in the insulating layer of a long Josephson junction (LJJ). The phase dynamics of the JVQ may be described by using the perturbed sine-Gordon equation. This sine-Gordon equation is transformed to describe the motion of fluxons in the double-well potential. An oscillation of a fluxon in this double-well potential is mapped onto a quantum two-state system. The coherent oscillation of fluxons in the two-state system decays due to dissipation and noises in the LJJ. To estimate the decoherence time, the two-state system in a noisy environment is described by using the spin-boson Hamiltonian. The time evolution of the system is studied by using the generalized master equation. Finally, I use the experimental parameters for Nb-AlOx-Nb Josephson junction to estimate the decoherence time. The result shows that JVQ has a very long decoherence time (several tens of microseconds) compared to other Josephson qubits. Entanglement between two coupled JVQs is estimated by computing the concurrence. The concurrence depends on the ground-state energy splitting due to the one-fluxon and two-fluxon tunneling between the potential minima of the two coupled JVQs. The tunneling amplitude between the potential minima depends on the junction parameters such as magnetic induction effect S, the separation distance ℓ, and the pinning strength of the microresistors ϵ. The estimation of the concurrence shows that a near perfect entanglement may be achieved by using the experimentally accessible values of the parameters. Also the study shows that the tunneling amplitude of the fluxon between the potential minima of the JVQs may be increased by coupling the junction with a resonant cavity. This characteristic of the junction-cavity coupling may be exploited to control the entanglement between two JVQs.