The paper cogitates about a comparative simulation for various distillation, reconciliation, and privacy amplification techniques that are used to generate secure symmetric physical layer keys. Elementary wireless model of two mobile nodes in the presence of a passive eavesdropper is used to perform the comparison process. Important modifications are proposed to some phases' techniques in order to increase the performance of the generation process as a whole. Different metrics were used for comparison in each phase, in the distillation phase, we use the Bit Mismatch Rate (BMR) for different SNR values to compare various extracted random strings of the two intended nodes. On the other hand, the messaging rate and process complexity is exploited to estimate the performance of the compared techniques in both reconciliation and privacy amplification phases. The randomness and entropy properties of the keys are verified using the NIST suite, all the generated keys are 128 bits, it is shown that the success rate of the keys passing the randomness tests depends strongly on the techniques that are used through the three generation phases.
The paper cogitates about a comparative simulation for various distillation, reconciliation, and privacy amplification techniques that are used to generate secure symmetric physical layer keys. Elementary wireless model of two mobile nodes in the presence of a passive eavesdropper is used to perform the comparison process. Important modifications are proposed to some phases' techniques in order to increase the performance of the generation process as a whole. Different metrics were used for comparison in each phase, in the distillation phase, we use the Bit Mismatch Rate (BMR) for different SNR values to compare various extracted random strings of the two intended nodes. On the other hand, the messaging rate and process complexity is exploited to estimate the performance of the compared techniques in both reconciliation and privacy amplification phases. The randomness and entropy properties of the keys are verified using the NIST suite, all the generated keys are 128 bits, it is shown that the success rate of the keys passing the randomness tests depends strongly on the techniques that are used through the three generation phases.
Wireless networks get subjected to the different attacks because of it's open nature. Eavesdropping attack, which occurs at the Physical layer of the OSI model, has a great impact on wireless network security. Conventional security in wireless networks depends on the cryptographic techniques. But in wireless sensor networks where a key management infrastructure may not be present and the power resources are also limited, generating a cryptographic key between two mobile entities becomes difficult. Hence Physical layer Security (PLS) has become a novel research solution. In PLS based key generation, a symmetric secret key is obtained at both the ends of the legitimate users using the properties of wireless channel. The key generation process includes four major blocks namely channel measurement, quantization of input samples, error detection and correction and privacy amplification. The output of quantizer has a great effect on the bit mismatch rate (BMR) between the two legitimate users. It also has an impact on key generation rate (KGR). Hence selecting a proper quantizer becomes very essential. In this paper different Quantization schemes are analyzed to achieve effective PLS between the two legitimate users.
The use of wireless networks for communication has grown significantly in recent times, and continues to develop further. The broadcast nature of wireless communications makes them susceptible to a wide variety of security attacks. Unlike traditional solutions, which usually handle security at the application layer, the primary concern of this dissertation is to analyse and develop solutions for secure communication using channel coding techniques at the physical-layer. \nThe topic of physical layer authenticated encryption using high rate key generation through shared randomness is investigated in this work. First, a physical layer secret key generation scheme is discussed exploiting channel reciprocity in wireless systems. In order to address the susceptibility of this family of schemes to active attacks, a novel physical layer authentication encryption protocol is presented along with its extension to multi-node networks in the presence of active adversaries. Unlike previous work in the area of generating secret keys through shared randomness, it is demonstrated that the proposed scheme is semantically secure with respect to chosen plaintext and chosen cipher text attacks. \nSecondly, in order to increase the rate in bits per seconds at which agreed cryptographic keys are been generated, a multi-level quantization algorithm with public feedback is discussed. It is demonstrated that the proposed scheme is superior to direct information distillation approaches and can substantially increase the key generation rates even at low and medium SNRs. Furthermore, the employment of this low-overhead feedback at the information distillation process can largely simplify the information reconciliation process. \nThe proposed secret key generation schemes are tested for randomness such as required for cryptographic keys. The validation test is perfomed with the aid of National Institute of Standards and Technology (NIST) statistical test suite. The P-values obtained in each of the test carried out indicates that the key sequence generated by our algorithm is random.
Wireless networks are vulnerable to various attacks due to their open nature, making them susceptible to eavesdropping and other security threats. Eavesdropping attack takes place at the physical layer. Traditional wireless network security relies on cryptographic techniques to secure data transmissions. However, these techniques may not be suitable for all scenarios, especially in resource-constrained environments such as wireless sensor networks and adhoc networks. In these networks having limited power resources, generating cryptographic keys between mobile entities can be challenging. Also, the cryptographic keys are computationally complex and require key management infrastructure. Physical Layer Key Generation (PLKG) is an emerging solution to address these challenges. It establishes secure communication between two users by taking advantage of the wireless channel's inherent features. PLKG process involves channel probing, quantization, information reconciliation (IR) and privacy amplification to generate symmetric secret key. The researchers have used various PLKG techniques to get the secret key, sTop of Form till they face problems in the IR scheme to obtain symmetric keys between the users who share the same channel for communication. Both the code based and protocol based methods proposed in the literature have advantages and limitations related to their performance parameters such as information leakage, interaction delay and computation complexity. This research work proposes a novel IR mechanism that combines the protocol and code-based error correction methods to obtain reduced Bit Mismatch Rate (BMR), reduced information leakage, reduced interaction delay, and reduced computational time to enhance physical layer secret key's quality. In the proposed research work, the channel samples are generated using the Received Signal Strength (RSS) and Channel Impulse Response (CIR) parameters. These samples are quantized using Vector Quantization with Affinity Propagation Clustering (VQAPC) method to generate the preliminary key. The samples collected by the two users who wish to communicate, (for example Alice and Bob) will be different due to noise in the channel and hardware limitations. Hence their preliminary keys will be different. Removing this discrepancy between Bob's and Alice's initial keys, using novel Hybrid Protocol and Code related Information Reconciliation (HPC-IR) scheme to generate error corrected key, is the most important contribution of this research work. This key is further encoded by the MD5 hash function to generate a final secret key for exchanging information between two users over the wireless channel. It is observed that the proposed HPC-IR scheme achieves BMR of 19.4%, information leakage is 0.002, interaction delay is 0.001 seconds and computation time is 0.02 seconds.
Physical layer security (PLS) has evolved to be a pivotal technique in ensuring secure wireless communication. This paper presents a comprehensive analysis of the recent developments in physical layer secret key generation (PLSKG). The principle, procedure, techniques and performance metricesare investigated for PLSKG between a pair of users (PSKG) and for a group of users (GSKG). In this paper, a detailed comparison of the various parameters and techniques employed in different stages of key generation such as, channel probing, quantisation, encoding, information reconciliation (IR) and privacy amplification (PA) are provided. Apart from this, a comparison of bit disagreement rate, bit generation rate and approximate entropy is also presented. The work identifies PSKG and GSKG schemes which are practically realizable and also provides a discussion on the test bed employed for realising various PLSKG schemes. Moreover, a discussion on the research challenges in the area of PLSKG is also provided for future research.
Physical layer Key generation is an attractive and recent alternative to achieve security in wireless networks. However, like other security algorithms, performance of physical layer key generation depends on randomness attained by generated keys. In this paper, different types of random tests like Frequency test, Serial test, Entropy test etc. are described and suitability of NIST statistical test suite for physical layer key generation is discussed. Furthermore, various applications of randomness are also briefly described. Since secrecy of key is crucial for wireless communication, a simulation model is developed for physical layer key generation and randomness of generated key is tested using NIST test suite. A set of arbitrary keys is also evaluated for randomness using NIST test. It is found that key generated using developed model is more random as compared to that of set of arbitrary keys. Therefore, this study suggests physical layer key generation as good candidature for achieving security in wireless networks.
Secure key generation is one of the promising approach to establish secured link between two legitimate nodes for wireless communication. We established a system, which generate the secret key at the both end of the legitimate node. Secure key generation system contain four major block namely channel estimation, quantization, information reconciliation and privacy amplification, in which quantization is one of the important module. In secured key generation, output of the quantizer will affects the bit mismatch rate significantly. The present paper analyses different quantization schemes to make synchronization between two nodes. By applying key generation technique, we analyze effect of quantization bit on the key disagreement rate.