Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Advances in Science and Technology (ICAST)

Comparative Analysis of Quantization Schemes for Physical Layer Key generation

Sujata V. Kadam, Joanne Gomes

Published Dec 2, 2022• 4 citations
Publisher

Abstract

Wireless networks get subjected to the different attacks because of it's open nature. Eavesdropping attack, which occurs at the Physical layer of the OSI model, has a great impact on wireless network security. Conventional security in wireless networks depends on the cryptographic techniques. But in wireless sensor networks where a key management infrastructure may not be present and the power resources are also limited, generating a cryptographic key between two mobile entities becomes difficult. Hence Physical layer Security (PLS) has become a novel research solution. In PLS based key generation, a symmetric secret key is obtained at both the ends of the legitimate users using the properties of wireless channel. The key generation process includes four major blocks namely channel measurement, quantization of input samples, error detection and correction and privacy amplification. The output of quantizer has a great effect on the bit mismatch rate (BMR) between the two legitimate users. It also has an impact on key generation rate (KGR). Hence selecting a proper quantizer becomes very essential. In this paper different Quantization schemes are analyzed to achieve effective PLS between the two legitimate users.

DOI
10.1109/icast55766.2022.10039641

Related papers

A Survey of Quantization Techniques for Physical Layer-Based Secret Key Generation in IoT Systems

Abdullah Dakhlallah Alshamdayn, Manki Min

Wireless communication systems are becoming increasingly important in our daily lives, especially with the rapid expansion of the Internet of Things (IoT). Secure and reliable communication is essential for the correct functioning of critical applications and use cases such as healthcare, finance, transportation, and industrial automation. However, the growing number of connected devices introduces significant challenges to data security and privacy due to the open nature of wireless networks. While traditional encryption methods are effective, they can be resource-intensive and impractical for resource-constrained IoT environments. Physical layer security (PLS) provides a lightweight alternative by leveraging the inherent characteristics of wireless channels to generate symmetric secret keys without requiring third-party infrastructure. The PLS key generation process involves four main stages: channel sampling, quantization, reconciliation, and privacy amplification. This paper provides a comprehensive survey of existing quantization schemes, as this step plays a crucial role in determining the key generation rate (KGR) and key disagreement rate (KDR). Additionally, the paper classifies quantization methods as either lossless or lossy, providing insights into the trade-offs between security and efficiency.

IEEE International Conference on Computing (ICOCO)•Dec 12, 2024•3 citations

A Survey on Quantization Schemes for Secure Key Generation

U.R. Bhatt, R. Sharma, A. Soni +1 more

Secure key generation is one of the promising approach to establish secured link between two legitimate nodes for wireless communication. We established a system, which generate the secret key at the both end of the legitimate node. Secure key generation system contain four major block namely channel estimation, quantization, information reconciliation and privacy amplification, in which quantization is one of the important module. In secured key generation, output of the quantizer will affects the bit mismatch rate significantly. The present paper analyses different quantization schemes to make synchronization between two nodes. By applying key generation technique, we analyze effect of quantization bit on the key disagreement rate.

International Journal of Scientific Research in Computer Sciences and Engineering•Jun 30, 2017•0 citations

A Novel Hybrid Protocol and Code Related Information Reconciliation Scheme for Physical Layer Secret Key Generation

Et al. Sujata Kadam

Wireless networks are vulnerable to various attacks due to their open nature, making them susceptible to eavesdropping and other security threats. Eavesdropping attack takes place at the physical layer. Traditional wireless network security relies on cryptographic techniques to secure data transmissions. However, these techniques may not be suitable for all scenarios, especially in resource-constrained environments such as wireless sensor networks and adhoc networks. In these networks having limited power resources, generating cryptographic keys between mobile entities can be challenging. Also, the cryptographic keys are computationally complex and require key management infrastructure. Physical Layer Key Generation (PLKG) is an emerging solution to address these challenges. It establishes secure communication between two users by taking advantage of the wireless channel's inherent features. PLKG process involves channel probing, quantization, information reconciliation (IR) and privacy amplification to generate symmetric secret key. The researchers have used various PLKG techniques to get the secret key, sTop of Form till they face problems in the IR scheme to obtain symmetric keys between the users who share the same channel for communication. Both the code based and protocol based methods proposed in the literature have advantages and limitations related to their performance parameters such as information leakage, interaction delay and computation complexity. This research work proposes a novel IR mechanism that combines the protocol and code-based error correction methods to obtain reduced Bit Mismatch Rate (BMR), reduced information leakage, reduced interaction delay, and reduced computational time to enhance physical layer secret key's quality. In the proposed research work, the channel samples are generated using the Received Signal Strength (RSS) and Channel Impulse Response (CIR) parameters. These samples are quantized using Vector Quantization with Affinity Propagation Clustering (VQAPC) method to generate the preliminary key. The samples collected by the two users who wish to communicate, (for example Alice and Bob) will be different due to noise in the channel and hardware limitations. Hence their preliminary keys will be different. Removing this discrepancy between Bob's and Alice's initial keys, using novel Hybrid Protocol and Code related Information Reconciliation (HPC-IR) scheme to generate error corrected key, is the most important contribution of this research work. This key is further encoded by the MD5 hash function to generate a final secret key for exchanging information between two users over the wireless channel. It is observed that the proposed HPC-IR scheme achieves BMR of 19.4%, information leakage is 0.002, interaction delay is 0.001 seconds and computation time is 0.02 seconds.

International Journal on Recent and Innovation Trends in Computing and Communication•Nov 5, 2023•0 citations

A Survey of Key Generation Techniques in Wireless channels for Physical Layer Security

Joanne Gomes, Sujata Kadam,

Nowadays wireless networks are highly concerned about security. Compared to wireless networks, wired networks are less prone to attacks. The physical layer eavesdropping attack has a significant impact on wireless network security. The use of cryptographic methods at the higher layers of the OSI model is necessary for traditional security in wireless networks. These cryptographic keys can be replaced with key generation at physical layer exploiting the unpredictable channel properties. Current methods for generating wireless keys at the physical layer are examined in this paper. Comprehensive surveys in this regard are conducted of the guiding principles, performance indicators, and key generation process. Techniques for enhancing the effectiveness of key generation are also reviewed. The difficulties of using the strategy in each situation are then discussed, along with key generation applications in diverse situations. The paper ends with several recommendations for future investigations.

International Journal of Intelligent Systems and Applications in Engineering•Mar 24, 2024•0 citations

On Quantization for Secret Key Generation From Wireless Channel Samples

Muhammad Adil, Shurjeel Wyne, Syed Junaid Nawaz

Physical layer security (PLS) techniques hold promise for augmenting secure communications in the 5thgeneration of mobile wireless networks. Secret key generation (SKG) is a PLS technique which exploits the wireless propagation channel's randomness to generate symmetric key bits for information encryption and decryption. This work proposes symmetric key generation based on non-uniform quantization of the received signal strength (RSS) samples of a Nakagami-$m$ fading channel. The proposed strategy for non-uniform quantization for SKG aims to set quantization thresholds for maximal key randomness and high values of key generation rate (KGR) and key agreement probability (KAP). Finally, a framework is proposed to use single node RSS measurements, readily available in the literature, to generate RSS samples at the other link end. This framework facilitates the testing of new SKG algorithms that require simultaneous RSS measurements by the legitimate nodes, which are not readily available in the open literature. The effectiveness of the proposed SKG scheme is validated through Monte Carlo methods and the National Institute of Standards and Technology (NIST) test suite for assessing the randomness of the generated key sequence.

IEEE Access•Jan 1, 2021•40 citations

Quantization at the Physical layer using Affinity Propagation Clustering

Sujata V. Kadam, Joanne Gomes

In today’s world security of information is of utmost importance. Traditionally symmetric and asymmetric cryptographic methods are used to keep information secure. But they face problems of high computational complexity and key management infrastructure. These issues can be resolved by Physical layer key generation (PLKG) schemes which use channel properties to generate a symmetric key. A basic PLKG system consists of probing the wireless channel, quantizing the probed samples and converting them into bits, error detection and correction between the quantized output bits and privacy amplification using secure hash functions. Quantization plays a critical role in PLKG in order to obtain the symmetric secret keys. This paper proposes Vector Quantization with Affinity Propagation Clustering (VQAPC). When the two legitimate users (Alice and Bob) assign a set of samples to different quantization regions, there will be difference in the quantization results which is called as Assignment Disagreement Rate(ADR). Simulation is done using MATLAB software. The proposed quantization method-VQAPC gives very low ADR as compared to the existing methods.

World Conference on Communication & Computing (WCONF)•Jul 14, 2023•4 citations
Wireless networks get subjected to the different attacks because of it's open nature. Eavesdropping attack, which occurs at the Physical layer of the OSI model, has a great impact on wireless network security. Conventional security in wireless networks depends on the cryptographic techniques. But in wireless sensor networks where a key management infrastructure may not be present and the power resources are also limited, generating a cryptographic key between two mobile entities becomes difficult. Hence Physical layer Security (PLS) has become a novel research solution. In PLS based key generation, a symmetric secret key is obtained at both the ends of the legitimate users using the properties of wireless channel. The key generation process includes four major blocks namely channel measurement, quantization of input samples, error detection and correction and privacy amplification. The output of quantizer has a great effect on the bit mismatch rate (BMR) between the two legitimate users. It also has an impact on key generation rate (KGR). Hence selecting a proper quantizer becomes very essential. In this paper different Quantization schemes are analyzed to achieve effective PLS between the two legitimate users.
Wireless communication systems are becoming increasingly important in our daily lives, especially with the rapid expansion of the Internet of Things (IoT). Secure and reliable communication is essential for the correct functioning of critical applications and use cases such as healthcare, finance, transportation, and industrial automation. However, the growing number of connected devices introduces significant challenges to data security and privacy due to the open nature of wireless networks. While traditional encryption methods are effective, they can be resource-intensive and impractical for resource-constrained IoT environments. Physical layer security (PLS) provides a lightweight alternative by leveraging the inherent characteristics of wireless channels to generate symmetric secret keys without requiring third-party infrastructure. The PLS key generation process involves four main stages: channel sampling, quantization, reconciliation, and privacy amplification. This paper provides a comprehensive survey of existing quantization schemes, as this step plays a crucial role in determining the key generation rate (KGR) and key disagreement rate (KDR). Additionally, the paper classifies quantization methods as either lossless or lossy, providing insights into the trade-offs between security and efficiency.
Secure key generation is one of the promising approach to establish secured link between two legitimate nodes for wireless communication. We established a system, which generate the secret key at the both end of the legitimate node. Secure key generation system contain four major block namely channel estimation, quantization, information reconciliation and privacy amplification, in which quantization is one of the important module. In secured key generation, output of the quantizer will affects the bit mismatch rate significantly. The present paper analyses different quantization schemes to make synchronization between two nodes. By applying key generation technique, we analyze effect of quantization bit on the key disagreement rate.
Wireless networks are vulnerable to various attacks due to their open nature, making them susceptible to eavesdropping and other security threats. Eavesdropping attack takes place at the physical layer. Traditional wireless network security relies on cryptographic techniques to secure data transmissions. However, these techniques may not be suitable for all scenarios, especially in resource-constrained environments such as wireless sensor networks and adhoc networks. In these networks having limited power resources, generating cryptographic keys between mobile entities can be challenging. Also, the cryptographic keys are computationally complex and require key management infrastructure. Physical Layer Key Generation (PLKG) is an emerging solution to address these challenges. It establishes secure communication between two users by taking advantage of the wireless channel's inherent features. PLKG process involves channel probing, quantization, information reconciliation (IR) and privacy amplification to generate symmetric secret key. The researchers have used various PLKG techniques to get the secret key, sTop of Form till they face problems in the IR scheme to obtain symmetric keys between the users who share the same channel for communication. Both the code based and protocol based methods proposed in the literature have advantages and limitations related to their performance parameters such as information leakage, interaction delay and computation complexity. This research work proposes a novel IR mechanism that combines the protocol and code-based error correction methods to obtain reduced Bit Mismatch Rate (BMR), reduced information leakage, reduced interaction delay, and reduced computational time to enhance physical layer secret key's quality. In the proposed research work, the channel samples are generated using the Received Signal Strength (RSS) and Channel Impulse Response (CIR) parameters. These samples are quantized using Vector Quantization with Affinity Propagation Clustering (VQAPC) method to generate the preliminary key. The samples collected by the two users who wish to communicate, (for example Alice and Bob) will be different due to noise in the channel and hardware limitations. Hence their preliminary keys will be different. Removing this discrepancy between Bob's and Alice's initial keys, using novel Hybrid Protocol and Code related Information Reconciliation (HPC-IR) scheme to generate error corrected key, is the most important contribution of this research work. This key is further encoded by the MD5 hash function to generate a final secret key for exchanging information between two users over the wireless channel. It is observed that the proposed HPC-IR scheme achieves BMR of 19.4%, information leakage is 0.002, interaction delay is 0.001 seconds and computation time is 0.02 seconds.
Nowadays wireless networks are highly concerned about security. Compared to wireless networks, wired networks are less prone to attacks. The physical layer eavesdropping attack has a significant impact on wireless network security. The use of cryptographic methods at the higher layers of the OSI model is necessary for traditional security in wireless networks. These cryptographic keys can be replaced with key generation at physical layer exploiting the unpredictable channel properties. Current methods for generating wireless keys at the physical layer are examined in this paper. Comprehensive surveys in this regard are conducted of the guiding principles, performance indicators, and key generation process. Techniques for enhancing the effectiveness of key generation are also reviewed. The difficulties of using the strategy in each situation are then discussed, along with key generation applications in diverse situations. The paper ends with several recommendations for future investigations.
Physical layer security (PLS) techniques hold promise for augmenting secure communications in the 5thgeneration of mobile wireless networks. Secret key generation (SKG) is a PLS technique which exploits the wireless propagation channel's randomness to generate symmetric key bits for information encryption and decryption. This work proposes symmetric key generation based on non-uniform quantization of the received signal strength (RSS) samples of a Nakagami-mmm fading channel. The proposed strategy for non-uniform quantization for SKG aims to set quantization thresholds for maximal key randomness and high values of key generation rate (KGR) and key agreement probability (KAP). Finally, a framework is proposed to use single node RSS measurements, readily available in the literature, to generate RSS samples at the other link end. This framework facilitates the testing of new SKG algorithms that require simultaneous RSS measurements by the legitimate nodes, which are not readily available in the open literature. The effectiveness of the proposed SKG scheme is validated through Monte Carlo methods and the National Institute of Standards and Technology (NIST) test suite for assessing the randomness of the generated key sequence.
In today’s world security of information is of utmost importance. Traditionally symmetric and asymmetric cryptographic methods are used to keep information secure. But they face problems of high computational complexity and key management infrastructure. These issues can be resolved by Physical layer key generation (PLKG) schemes which use channel properties to generate a symmetric key. A basic PLKG system consists of probing the wireless channel, quantizing the probed samples and converting them into bits, error detection and correction between the quantized output bits and privacy amplification using secure hash functions. Quantization plays a critical role in PLKG in order to obtain the symmetric secret keys. This paper proposes Vector Quantization with Affinity Propagation Clustering (VQAPC). When the two legitimate users (Alice and Bob) assign a set of samples to different quantization regions, there will be difference in the quantization results which is called as Assignment Disagreement Rate(ADR). Simulation is done using MATLAB software. The proposed quantization method-VQAPC gives very low ADR as compared to the existing methods.