Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Electronics and Laser Science Conference

A tube-MOT of cesium atoms for loading microstructures

Mukund Vengalattore, Wilbert Rooijakkers, Tao Deng, George M. Whitesides, Mara Goff Prentiss

Published Nov 13, 2002• 0 citations
Publisher

Abstract

Summary form only given. The magneto-optical trap (MOT) has become the workhorse for many, if not most atom-optics experiments. The traditional MOT uses a pair of coils in anti-Helmholtz configuration to generate a quadrupole field with a typical gradient in the order of 10 Gauss/cm and a typical MOT diameter of 1 mm. In this paper we describe the formation of a surface MOT in a skewed magnetic field, produced by a magnetic laminate.We have imaged the fluorescence of the trapped cloud onto a CCD camera, and made cross sections of the trapped atom cloud.

DOI
10.1109/qels.2001.961925

Related papers

Using a pair of rectangular coils in the MOT for the production of cold atom clouds with large optical density

Yen-Wei Lin, Hung-Chih Chou, Prashant Dwivedi +2 more

We demonstrate a simple method to increase the optical density (OD) of cold atom clouds produced by a magneto-optical trap (MOT). A pair of rectangular anti-Helmholtz coils is used in the MOT to generate the magnetic field that produces the cigar-shaped atom cloud. With 7.2x10(8) (87)Rb atoms in the cigar-type MOT, we achieve an OD of 32 as determined by the slow light measurement and this OD is large enough such that the atom cloud can almost contain the entire Gaussian light pulse. Compared to the conventional MOT under the same trapping conditions, the OD is increased by about 2.7 folds by this simple method. In another MOT setup of the cigar-shaped Cs atom cloud, we achieve an OD of 105 as determined by the absorption spectrum of the |6S(1/2),F = 4>-->/6P(3/2),F' = 5> transition.

Optics Express•Mar 6, 2008•63 citations

Characterization of magnetic field for loading, trapping and transferring cold atom close to the atom chip’s surface

Nuttida Kaewart, Nithiwadee Thaicharoen, Pimonpan Sompet +1 more

Abstract Atom chips provide flexible technologies for implementing modern concepts in quantum optics, quantum measurement, and quantum information processing. Atom chips are miniature devices that confine, control and manipulate cold atoms using electric, magnetic, and light fields. Due to the shrinkage of scale, arbitrary magnetic traps can be generated from current sources outside the chip’s vacuum compartment, in contrast to a traditional setup. This makes it easy to change trap configurations in an experiment that involves rapid prototyping of quantum states and quantum trajectory designs in free space. In this work, we show relevant parameters needed for transferring a cold atom cloud at the recoil limit from a magneto-optical trap (MOT) to an area close to the atom chip. To create a movable magnetic potential for this transfer, we used the MOT coils and an additional pair of coils in an anti-Helmholtz configuration. The properties of the movable potential were obtained by performing the Computer Simulation Tool (CST EM Studio suite®). Furthermore, an appropriate magnetic trap on a chip is developed, based on the simulation from COMSOL Multiphysics. We used a magnetic field gradient of around 20 G/cm to transport the cold atom with a distance over 20 mm with a temperature gain below 100 micro-Kelvin. The simulation results are based on an atom chip with a size of 2×2 cm2 and a copper wire thickness of 2 mm. The atom chip consists of Z, U and I-shaped wires that generate a quadrupole magnetic field. The resulting field minimum can be made at least 7 mm away from the chip surface.

Journal of Physics Conference Series•Dec 1, 2023•1 citation

Planar-Integrated Magneto-Optical Trap

Liang Chen, Chang-Jiang Huang, Xin‐Biao Xu +12 more

The magneto-optical trap (MOT) is an essential tool for collecting and preparing cold atoms with a wide range of applications. We demonstrate a planar-integrated MOT by combining an optical grating chip with a magnetic coil chip. The flat grating chip simplifies the conventional six-beam configuration down to a single laser beam, and the flat coil chip replaces the conventional anti-Helmholtz coils of cylindrical geometry. Up to ${10}^{6}$ cold ${}^{87}\mathrm{Rb}$ atoms are trapped by the planar-integrated MOT, with the atom cloud being approximately $6\phantom{\rule{0.2em}{0ex}}\mathrm{mm}$ above the chip surface. This configuration effectively reduces the volume, weight, and complexity of the MOT, bringing benefits to applications including gravimeter, clock, and quantum memory devices.

arXiv:2107.07367•Physical Review Applied•Mar 10, 2022•64 citations

Design, structural stability, and performance of a cesium magneto-optical trap with large optical access using additively manufactured magnetic field coil mounts

Kamalkant Kamalkant, Poonam Yadav, Arnab Ghosh +5 more

Cold atoms form the backbone of many quantum technology applications, including quantum computation, sensing, and networking. These experiments require a robust cold atom source, precise control of beam parameters, and large optical access. We demonstrate a compact cesium magneto-optical trap (MOT) directly loaded from background vapor, with a footprint of 34 × 56 cm2. The quadrupole and compensation coils are mounted on additively manufactured components, eliminating the need for water cooling and minimizing eddy currents, which enables fast magnetic field switching with a measured settling time of 240 μs. Finite element analysis confirms the mechanical robustness and thermal stability of the coil mounts. The MOT achieves 5 × 106 atoms at a density of 109 cm-3, with a temperature of 76 ± 2 μK, demonstrating a reliable and compact platform suitable for quantum technology experiments.

Review of Scientific Instruments•Jun 1, 2026•0 citations

Loading mechanism for atomic guides

Boon-Keng Kevin Teo, Georg A. Raithel

Summary form only given. Small guides can produce very strong confining fields but the transfer of cold atoms from a magneto optical trap (MOT) into such guides present a problem. This is because MOTs require a fixed trapping volume of /spl sim/ 1 cm/sup 3/ and cannot be miniaturized in the same way as atom guides. We demonstrate the loading of atoms from a cycled MOT into a tapered magnetic atom guide that overlaps with the MOT. This integrated loading strategy involves the formation of a MOT directly inside the atom guide.

Quantum Electronics and Laser Science Conference•Nov 13, 2002•0 citations

Construction of a Blue Neutral Cesium-133 Magneto-Optical Trap

Madison Whitmore

The magneto-optical trap (MOT) serves as the culmination of optical cooling and trapping, where by applying a linear magnetic field to orthogonal, circularly polarized, retroreflecting laser beams, one can produce a dense cloud of very cold atoms, on the order of μK. This work set out to create a magneto-optical trap using only visible light with the 6s 2S1/2 → 7p 2P◦ 3/2 transition of cesium-133, which is far weaker than the transition typically employed for a cesium-133 MOT. This transition alone has yet to be used in isolation to create a MOT, and the purpose of this work is to demonstrate the feasibility of such a MOT. While the creation of a MOT with the setup produced has thus far been unsuccessful, the components are in place for one to be made as a demonstration of optical cooling and trapping that should be visible to the naked eye. Additionally, an experimental setup was created for high precision measurements of the absolute energies of the 7p 2P◦ 1/2 and 7p 2P◦ 3/2 states. The theory behind the MOT and high precision spectroscopy is expounded upon within.

•May 1, 2025•0 citations
Summary form only given. The magneto-optical trap (MOT) has become the workhorse for many, if not most atom-optics experiments. The traditional MOT uses a pair of coils in anti-Helmholtz configuration to generate a quadrupole field with a typical gradient in the order of 10 Gauss/cm and a typical MOT diameter of 1 mm. In this paper we describe the formation of a surface MOT in a skewed magnetic field, produced by a magnetic laminate.We have imaged the fluorescence of the trapped cloud onto a CCD camera, and made cross sections of the trapped atom cloud.
We demonstrate a simple method to increase the optical density (OD) of cold atom clouds produced by a magneto-optical trap (MOT). A pair of rectangular anti-Helmholtz coils is used in the MOT to generate the magnetic field that produces the cigar-shaped atom cloud. With 7.2x10(8) (87)Rb atoms in the cigar-type MOT, we achieve an OD of 32 as determined by the slow light measurement and this OD is large enough such that the atom cloud can almost contain the entire Gaussian light pulse. Compared to the conventional MOT under the same trapping conditions, the OD is increased by about 2.7 folds by this simple method. In another MOT setup of the cigar-shaped Cs atom cloud, we achieve an OD of 105 as determined by the absorption spectrum of the |6S(1/2),F = 4>-->/6P(3/2),F' = 5> transition.
Abstract Atom chips provide flexible technologies for implementing modern concepts in quantum optics, quantum measurement, and quantum information processing. Atom chips are miniature devices that confine, control and manipulate cold atoms using electric, magnetic, and light fields. Due to the shrinkage of scale, arbitrary magnetic traps can be generated from current sources outside the chip’s vacuum compartment, in contrast to a traditional setup. This makes it easy to change trap configurations in an experiment that involves rapid prototyping of quantum states and quantum trajectory designs in free space. In this work, we show relevant parameters needed for transferring a cold atom cloud at the recoil limit from a magneto-optical trap (MOT) to an area close to the atom chip. To create a movable magnetic potential for this transfer, we used the MOT coils and an additional pair of coils in an anti-Helmholtz configuration. The properties of the movable potential were obtained by performing the Computer Simulation Tool (CST EM Studio suite®). Furthermore, an appropriate magnetic trap on a chip is developed, based on the simulation from COMSOL Multiphysics. We used a magnetic field gradient of around 20 G/cm to transport the cold atom with a distance over 20 mm with a temperature gain below 100 micro-Kelvin. The simulation results are based on an atom chip with a size of 2×2 cm2 and a copper wire thickness of 2 mm. The atom chip consists of Z, U and I-shaped wires that generate a quadrupole magnetic field. The resulting field minimum can be made at least 7 mm away from the chip surface.
The magneto-optical trap (MOT) is an essential tool for collecting and preparing cold atoms with a wide range of applications. We demonstrate a planar-integrated MOT by combining an optical grating chip with a magnetic coil chip. The flat grating chip simplifies the conventional six-beam configuration down to a single laser beam, and the flat coil chip replaces the conventional anti-Helmholtz coils of cylindrical geometry. Up to 106{10}^{6}106 cold 87Rb{}^{87}\mathrm{Rb}87Rb atoms are trapped by the planar-integrated MOT, with the atom cloud being approximately 6mm6\phantom{\rule{0.2em}{0ex}}\mathrm{mm}6mm above the chip surface. This configuration effectively reduces the volume, weight, and complexity of the MOT, bringing benefits to applications including gravimeter, clock, and quantum memory devices.
Cold atoms form the backbone of many quantum technology applications, including quantum computation, sensing, and networking. These experiments require a robust cold atom source, precise control of beam parameters, and large optical access. We demonstrate a compact cesium magneto-optical trap (MOT) directly loaded from background vapor, with a footprint of 34 × 56 cm2. The quadrupole and compensation coils are mounted on additively manufactured components, eliminating the need for water cooling and minimizing eddy currents, which enables fast magnetic field switching with a measured settling time of 240 μs. Finite element analysis confirms the mechanical robustness and thermal stability of the coil mounts. The MOT achieves 5 × 106 atoms at a density of 109 cm-3, with a temperature of 76 ± 2 μK, demonstrating a reliable and compact platform suitable for quantum technology experiments.
Summary form only given. Small guides can produce very strong confining fields but the transfer of cold atoms from a magneto optical trap (MOT) into such guides present a problem. This is because MOTs require a fixed trapping volume of /spl sim/ 1 cm/sup 3/ and cannot be miniaturized in the same way as atom guides. We demonstrate the loading of atoms from a cycled MOT into a tapered magnetic atom guide that overlaps with the MOT. This integrated loading strategy involves the formation of a MOT directly inside the atom guide.
The magneto-optical trap (MOT) serves as the culmination of optical cooling and trapping, where by applying a linear magnetic field to orthogonal, circularly polarized, retroreflecting laser beams, one can produce a dense cloud of very cold atoms, on the order of μK. This work set out to create a magneto-optical trap using only visible light with the 6s 2S1/2 → 7p 2P◦ 3/2 transition of cesium-133, which is far weaker than the transition typically employed for a cesium-133 MOT. This transition alone has yet to be used in isolation to create a MOT, and the purpose of this work is to demonstrate the feasibility of such a MOT. While the creation of a MOT with the setup produced has thus far been unsuccessful, the components are in place for one to be made as a demonstration of optical cooling and trapping that should be visible to the naked eye. Additionally, an experimental setup was created for high precision measurements of the absolute energies of the 7p 2P◦ 1/2 and 7p 2P◦ 3/2 states. The theory behind the MOT and high precision spectroscopy is expounded upon within.