Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Review of Scientific Instruments

Design, structural stability, and performance of a cesium magneto-optical trap with large optical access using additively manufactured magnetic field coil mounts

Kamalkant Kamalkant, Poonam Yadav, Arnab Ghosh, Neha Singh, Shweta, Hemant Yadav, Deepshikha Singh, Bodhaditya Santra

Published Jun 1, 2026• 0 citations
Publisher

Abstract

Cold atoms form the backbone of many quantum technology applications, including quantum computation, sensing, and networking. These experiments require a robust cold atom source, precise control of beam parameters, and large optical access. We demonstrate a compact cesium magneto-optical trap (MOT) directly loaded from background vapor, with a footprint of 34 × 56 cm2. The quadrupole and compensation coils are mounted on additively manufactured components, eliminating the need for water cooling and minimizing eddy currents, which enables fast magnetic field switching with a measured settling time of 240 μs. Finite element analysis confirms the mechanical robustness and thermal stability of the coil mounts. The MOT achieves 5 × 106 atoms at a density of 109 cm-3, with a temperature of 76 ± 2 μK, demonstrating a reliable and compact platform suitable for quantum technology experiments.

DOI
10.1063/5.0321012

Related papers

A robust and modular cesium magneto-optical trap using divergent laser beams

Paola Luna, Kenneth Nakasone, Andrei Zhukov +4 more

Magneto-optical traps (MOTs) are a workhorse technology for neutral-atom quantum sensing, simulation, and computing. Here, we demonstrate a MOT optimized for inertial quantum sensing and precision metrology applications. Our MOT traps $4\times10^8$ cesium (Cs) atoms in a robust, modular system that achieves stable operation through two design features: (1) we use divergent cooling laser beams to reduce unwanted reflections and (2) optical elements are mounted in a fiber-coupled, compact, and modular cage rigidly attached to the vacuum chamber. Following polarization-gradient cooling (PGC), the system produces atom samples with temperatures below 10 $μ$K, similar to those achieved in conventional MOTs that use collimated laser beams. In addition, we observe trapping of $2\times10^7$ Cs atoms in a non-conventional MOT geometry, where the cooling laser beams are diagonal to the principal axis of the quadrupole magnetic field.

physics.atom-phCross-listedarXiv:2607.13145•AVS Quantum Science•Jul 16, 2026•1 citation

Design of Magneto-Optical Traps for Additive Manufacture by 3D Printing

Yijia Zhou, N. Welch, Rosemary Crawford +6 more

A key element in the study of cold atoms, and their use in emerging quantum technologies, is trapping the atoms in an ultra-high vacuum (UHV) chamber. Many methods have been used to trap atoms including atom chips and magneto-optical traps (MOTs). However, the bulky apparatus, and current-carrying coils, used so far in most MOTs restrict the reduction of power and physical size, as required for quantum technology applications. The advent of 3D printing technology now offers a new route to making MOTs with current paths that can be freely shaped and shrunk to several centimetres, thereby helping to reduce the power consumption and simplify the production of the MOT itself. In this paper, we present designs for 3D printed MOTs and analyse their performance by using COMSOL simulations. We predict that the 3D-printed conductors can create magnetic fields with gradients around 15 G/cm and passing through zero, as required for atom trapping, with Joule heating as low as 0.2 W.

arXiv:1704.00430•Apr 3, 2017•5 citations

Characterization of magnetic field for loading, trapping and transferring cold atom close to the atom chip’s surface

Nuttida Kaewart, Nithiwadee Thaicharoen, Pimonpan Sompet +1 more

Abstract Atom chips provide flexible technologies for implementing modern concepts in quantum optics, quantum measurement, and quantum information processing. Atom chips are miniature devices that confine, control and manipulate cold atoms using electric, magnetic, and light fields. Due to the shrinkage of scale, arbitrary magnetic traps can be generated from current sources outside the chip’s vacuum compartment, in contrast to a traditional setup. This makes it easy to change trap configurations in an experiment that involves rapid prototyping of quantum states and quantum trajectory designs in free space. In this work, we show relevant parameters needed for transferring a cold atom cloud at the recoil limit from a magneto-optical trap (MOT) to an area close to the atom chip. To create a movable magnetic potential for this transfer, we used the MOT coils and an additional pair of coils in an anti-Helmholtz configuration. The properties of the movable potential were obtained by performing the Computer Simulation Tool (CST EM Studio suite®). Furthermore, an appropriate magnetic trap on a chip is developed, based on the simulation from COMSOL Multiphysics. We used a magnetic field gradient of around 20 G/cm to transport the cold atom with a distance over 20 mm with a temperature gain below 100 micro-Kelvin. The simulation results are based on an atom chip with a size of 2×2 cm2 and a copper wire thickness of 2 mm. The atom chip consists of Z, U and I-shaped wires that generate a quadrupole magnetic field. The resulting field minimum can be made at least 7 mm away from the chip surface.

Journal of Physics Conference Series•Dec 1, 2023•1 citation

Compact Atomic Source for Quantum Simulation Experiments : Design and Characterization of a 3D Magneto-Optical Trap for Rb-87 Atoms

G. Ortiz Ugalde, C. J. Ruiz Loredo, Sonia Sánchez +3 more

SummaryWe present the design and characterization of a magneto-optical trap as a compact atomic source for quantum simulation experiments. The trap exhibits a loading rate of 1.07(3)x107atoms/s with a mean atom number of 1.96(6)x109, derived from MOT fluorescence measurements. Fluorescence imaging with a CCD camera determined the 1/e2radius of the 3D MOT to be 1.01(7) mm. Additionally, post-cooling ramps reduced the system's temperature to 13(4) μK. These results highlight the potential of our setup as a robust and compact source for advanced technologies and quantum simulation experiments.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 12, 2025•0 citations

On the use of additive manufacturing for atom trapping components in quantum technologies

W. D. Evans

This thesis details the advances made in the use of additive manufacturing to produce magnetic field generating devices and vacuum components for atomic quantum technologies. Cold atomic clouds are used across a suite of quantum sensors including magnetometers, gravimeters and navigational interferometers; as these sensors approach industrial use, they must be translated from laboratory systems to portable devices. The discussion focuses on a number of devices that demonstrate the benefits provided by this approach. Specifically, the devices discussed are a current carrying cylinder trapping device, an ultra-high vacuum (UHV) chamber and a hollow-core coil mount device. This thesis also covers a range of auxiliary developments that have been made alongside the main body of work including a microprocessor-based control system and a pre-cooling stage for cold atom experiments. To begin this thesis reviews the underlying physical phenomena which are exploited when trapping neutral atoms. In particular, it is important to understand the details of the specific case when working with rubidium-87, including the relevant energy levels diagrams and corresponding laser frequencies. This allows for the discussion of the key forces that are used in magneto-optical trapping (MOT) and magnetic trapping including the origin of the magnetic fields generated by these devices using the Biot-Savart law. The key results that are presented in this thesis centre on the efficacy of these devices as atom traps for quantum technologies and atomic experiments. The atom trap cylinder is capable of trapping 108 rubidium atoms at a temperature of 20 µK, demonstrating the feasibility of this approach. The hollow coil mount device presents a viable route for magnetic trapping. Lastly, the UHV chamber operates in the range of 10-10 mbar as necessary for atomic physics experiments. In addition, this thesis reviews the design of a pre-cooling stage for complex atomic experiments and a simplified experimental control system. These are addressed in a systematic approach to the experimental constituents with a comparison between complex fundamental physics experiments and the developments made towards a portable quantum technology device.

•Dec 14, 2020•0 citations

A compact six-beam 3D magneto-optical trap based on multifunctional metasurface chips

Chen Qing, Huijie Sun, Yize Liu +5 more

Magneto-optical traps (MOTs), indispensable to cold-atom-based quantum computing and quantum precision measurement, are increasingly desired in compact and stable form. Particularly, the six-beam 3D-MOT, distinguished by symmetric geometry and superior trapping performance, finds particularly broad applications. Conventional implementations, however, rely on complex and bulky free-space optics, hindering miniaturization, practical assembly, and long-term stability. Here, we demonstrate a compact six-beam 3D-MOT system that employs two multifunctional optical metasurface chips to implement the optical-field functionalities required for cooling and trapping atoms. By combining two metasurface chips and a vacuum cell, a photonic-integrated cell module (PICM) is implemented as the core assembly and the volume is only" 73*73*107 mm^3" . In success, 1.3 * 10^3 Rb atoms are trapped and cooled to the temperature of ~183 μK. It should be noticed that the laser beam is guided to the metasurface through optical fiber, thus such fully fiber-coupled architecture enables straightforward and stable operations. We believe that this work would pave a practical route toward compact and portable 3D-MOT.

physics.opticsCross-listedarXiv:2610.19504•Oct 15, 2026•0 citations
Cold atoms form the backbone of many quantum technology applications, including quantum computation, sensing, and networking. These experiments require a robust cold atom source, precise control of beam parameters, and large optical access. We demonstrate a compact cesium magneto-optical trap (MOT) directly loaded from background vapor, with a footprint of 34 × 56 cm2. The quadrupole and compensation coils are mounted on additively manufactured components, eliminating the need for water cooling and minimizing eddy currents, which enables fast magnetic field switching with a measured settling time of 240 μs. Finite element analysis confirms the mechanical robustness and thermal stability of the coil mounts. The MOT achieves 5 × 106 atoms at a density of 109 cm-3, with a temperature of 76 ± 2 μK, demonstrating a reliable and compact platform suitable for quantum technology experiments.
Magneto-optical traps (MOTs) are a workhorse technology for neutral-atom quantum sensing, simulation, and computing. Here, we demonstrate a MOT optimized for inertial quantum sensing and precision metrology applications. Our MOT traps 4×1084\times10^84×108 cesium (Cs) atoms in a robust, modular system that achieves stable operation through two design features: (1) we use divergent cooling laser beams to reduce unwanted reflections and (2) optical elements are mounted in a fiber-coupled, compact, and modular cage rigidly attached to the vacuum chamber. Following polarization-gradient cooling (PGC), the system produces atom samples with temperatures below 10 μμμK, similar to those achieved in conventional MOTs that use collimated laser beams. In addition, we observe trapping of 2×1072\times10^72×107 Cs atoms in a non-conventional MOT geometry, where the cooling laser beams are diagonal to the principal axis of the quadrupole magnetic field.
A key element in the study of cold atoms, and their use in emerging quantum technologies, is trapping the atoms in an ultra-high vacuum (UHV) chamber. Many methods have been used to trap atoms including atom chips and magneto-optical traps (MOTs). However, the bulky apparatus, and current-carrying coils, used so far in most MOTs restrict the reduction of power and physical size, as required for quantum technology applications. The advent of 3D printing technology now offers a new route to making MOTs with current paths that can be freely shaped and shrunk to several centimetres, thereby helping to reduce the power consumption and simplify the production of the MOT itself. In this paper, we present designs for 3D printed MOTs and analyse their performance by using COMSOL simulations. We predict that the 3D-printed conductors can create magnetic fields with gradients around 15 G/cm and passing through zero, as required for atom trapping, with Joule heating as low as 0.2 W.
Abstract Atom chips provide flexible technologies for implementing modern concepts in quantum optics, quantum measurement, and quantum information processing. Atom chips are miniature devices that confine, control and manipulate cold atoms using electric, magnetic, and light fields. Due to the shrinkage of scale, arbitrary magnetic traps can be generated from current sources outside the chip’s vacuum compartment, in contrast to a traditional setup. This makes it easy to change trap configurations in an experiment that involves rapid prototyping of quantum states and quantum trajectory designs in free space. In this work, we show relevant parameters needed for transferring a cold atom cloud at the recoil limit from a magneto-optical trap (MOT) to an area close to the atom chip. To create a movable magnetic potential for this transfer, we used the MOT coils and an additional pair of coils in an anti-Helmholtz configuration. The properties of the movable potential were obtained by performing the Computer Simulation Tool (CST EM Studio suite®). Furthermore, an appropriate magnetic trap on a chip is developed, based on the simulation from COMSOL Multiphysics. We used a magnetic field gradient of around 20 G/cm to transport the cold atom with a distance over 20 mm with a temperature gain below 100 micro-Kelvin. The simulation results are based on an atom chip with a size of 2×2 cm2 and a copper wire thickness of 2 mm. The atom chip consists of Z, U and I-shaped wires that generate a quadrupole magnetic field. The resulting field minimum can be made at least 7 mm away from the chip surface.
SummaryWe present the design and characterization of a magneto-optical trap as a compact atomic source for quantum simulation experiments. The trap exhibits a loading rate of 1.07(3)x107atoms/s with a mean atom number of 1.96(6)x109, derived from MOT fluorescence measurements. Fluorescence imaging with a CCD camera determined the 1/e2radius of the 3D MOT to be 1.01(7) mm. Additionally, post-cooling ramps reduced the system's temperature to 13(4) μK. These results highlight the potential of our setup as a robust and compact source for advanced technologies and quantum simulation experiments.
This thesis details the advances made in the use of additive manufacturing to produce magnetic field generating devices and vacuum components for atomic quantum technologies. Cold atomic clouds are used across a suite of quantum sensors including magnetometers, gravimeters and navigational interferometers; as these sensors approach industrial use, they must be translated from laboratory systems to portable devices. The discussion focuses on a number of devices that demonstrate the benefits provided by this approach. Specifically, the devices discussed are a current carrying cylinder trapping device, an ultra-high vacuum (UHV) chamber and a hollow-core coil mount device. This thesis also covers a range of auxiliary developments that have been made alongside the main body of work including a microprocessor-based control system and a pre-cooling stage for cold atom experiments. To begin this thesis reviews the underlying physical phenomena which are exploited when trapping neutral atoms. In particular, it is important to understand the details of the specific case when working with rubidium-87, including the relevant energy levels diagrams and corresponding laser frequencies. This allows for the discussion of the key forces that are used in magneto-optical trapping (MOT) and magnetic trapping including the origin of the magnetic fields generated by these devices using the Biot-Savart law. The key results that are presented in this thesis centre on the efficacy of these devices as atom traps for quantum technologies and atomic experiments. The atom trap cylinder is capable of trapping 108 rubidium atoms at a temperature of 20 µK, demonstrating the feasibility of this approach. The hollow coil mount device presents a viable route for magnetic trapping. Lastly, the UHV chamber operates in the range of 10-10 mbar as necessary for atomic physics experiments. In addition, this thesis reviews the design of a pre-cooling stage for complex atomic experiments and a simplified experimental control system. These are addressed in a systematic approach to the experimental constituents with a comparison between complex fundamental physics experiments and the developments made towards a portable quantum technology device.
Magneto-optical traps (MOTs), indispensable to cold-atom-based quantum computing and quantum precision measurement, are increasingly desired in compact and stable form. Particularly, the six-beam 3D-MOT, distinguished by symmetric geometry and superior trapping performance, finds particularly broad applications. Conventional implementations, however, rely on complex and bulky free-space optics, hindering miniaturization, practical assembly, and long-term stability. Here, we demonstrate a compact six-beam 3D-MOT system that employs two multifunctional optical metasurface chips to implement the optical-field functionalities required for cooling and trapping atoms. By combining two metasurface chips and a vacuum cell, a photonic-integrated cell module (PICM) is implemented as the core assembly and the volume is only" 73*73*107 mm^3" . In success, 1.3 * 10^3 Rb atoms are trapped and cooled to the temperature of ~183 μK. It should be noticed that the laser beam is guided to the metasurface through optical fiber, thus such fully fiber-coupled architecture enables straightforward and stable operations. We believe that this work would pave a practical route toward compact and portable 3D-MOT.