Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Symposium on VLSI Circuits

A sub-ns clock josephson 4b processor

Kotani, Imamura, Hasuo

Published Jan 1, 1989• 7 citations
Publisher

Abstract

We constructed a 4h processor with a Lh slice microprocessor, 4b multiplier, 12b accumulator, 8Kb ROM and sequencer. The chip was fabricated with 1.5-um all-niobium technology, and contains 24,000 Nb/AlO,/Nb Josephson junctions. The processor vas operated up to 1.1 GRz under worst-case conditions, dissipating 6.1 mW.
DOI
10.1109/vlsic.1989.1037469

Related papers

A 1-GHz-clock Josephson microcomputer system

S. Yano, Y. Hatano, H. Mori +4 more

A 1-GHz-clock Josephson microcomputer system was developed to demonstrate the possibility of a high-speed superconducting computer system. It consists of a 4-b data processor chip and a 1-kb RAM chip. For the fabrication of these Josephson integrated circuits, a cross-shaped Nb-AlO/sub x/-Nb Josephson junction process was developed in order to realize small junction size and improve critical current uniformity, and has made fabrication of LSIs with several thousand gates possible. A latchup-free DC flip-flop is an important element in the high-speed Josephson logic and memory circuits, having been applied to an all-DC-powered Josephson RAM with asynchronous access capability. A low-inductance chip-to-chip carrier is an architectural and design concept for the Josephson computer's 1-GHz-clock operation, suppressing the crosstalk between the AC power and the output signals. Each chip is 7 mm square and is fabricated using a 2.5- mu m-rule Nb-AlO/sub x/-Nb junction process. The chips are connected on a superconducting carrier by solder bumps in a die size of 15 mm by 25 mm. The system is constructed from 8123 Josephson interferometer devices and is operable in a 1-ns cycle with 50-mW power dissipation.

IEEE Transactions on Magnetics•Mar 1, 1991•15 citations

A Sub-ns Clock Cryogenic System For Josephson Computers

Seigo Kotani, A. Inoue, Hideo Suzuki +7 more

Josephson gates have speed and low power dissipation, as demonstrated in a 6300-gate 8b digital signal processor and a 4kb SRAM.1 2 3 Josephson LSI chips operate up to 1GHz but their gate count and memory capacity are not sufficient to permit fabrication of computing systems using only these chips. The solution is to combine them with semiconductor chips. But, in this case, the propagation delay caused by VO cables, typically 1.3m, is a serious problem because Josephson chips must be kept at low temperature, typically 4.2K.

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Jan 1, 1991•4 citations

A 4 b Josephson data processor chip

Y. Hatano, H. Mori, Hironao YAMADA +4 more

The authors describe a 4-bit Josephson data processor chip featuring on-chip control and data paths and near-GHz capability. It is a closed, stand-alone chip comprising a 4-bit data path and a control path and is aimed at high-speed digital signal processing. The die is 0.5 mm square, including pads, is fabricated using 2.5- mu m-rule Nb/AlO/sub x//Nb technology, and consists of 8454 Josephson junctions and 9027 resistors. The cross-shaped junction structure realizes critical current scattering of +or-6%, and a junction characteristic voltage V/sub m/ of 50 mV. A block diagram of the Josephson data processor is shown.>

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Jan 13, 2003•7 citations

A 4K Josephson memory

Hideo Suzuki, Norio Fujimaki, Hirotaka Tamura +2 more

The authors describe the design and experimental performance of a 4 K*1-bit Josephson (RAM). For high-speed memory operation, the authors have developed a compact AND gate for the decoder, a high-voltage driver gate, and a capacitively coupled single-flux quantum memory cell. The 4 K memory was designed using these gates and cell and was fabricated with Nb/AlO/sub x//Nb junctions. The minimum access time was 590 ps, and the total power dissipation was 19 mW.>

IEEE Transactions on Magnetics•Mar 1, 1989•48 citations

High-speed Josephson processor technology

S. Hasuo, Seigo Kotani, A. Inoue +1 more

High-speed operation of Josephson processors is demonstrated. They are a 4-b microprocessor, a 4-b processor, and an 8-b digital signal processor. Key technologies to realize these circuits are described from the viewpoint of circuit design. The technologies are a high-speed logic gate, named MVTL (modified variable threshold logic), and a three-phase sinusoidal power supply system. The MVTL gate has a large operating margin and high sensitivity. The MVTL gate family consists of OR, AND, 2/3 majority (MJ), and timed inverter (TI). Using these gates a variety of processors have been designed. These processors operate with three-phase power. The waveform is sinusoidal with DC-offset. This power supply system needs no latch and regulator circuit. This makes the processor very simple, and thus results in high-speed operation. To fabricate these processors, niobium junctions are very important, because they are reliable, uniform, controllable, and reproducible. High-speed gates, three-phase power supplies, and niobium junctions are indispensable for high-speed Josephson processors.

IEEE Transactions on Magnetics•Mar 1, 1991•25 citations

Fabrication of sub-μm Nb/Al-AlO$_x$/Nb Josephson Junctions with Electron Beam Lithography for Qubit Applications

Ch. Kaiser, K. Ilin, M. Siegel

•Jan 1, 2008•0 citations
A 1-GHz-clock Josephson microcomputer system was developed to demonstrate the possibility of a high-speed superconducting computer system. It consists of a 4-b data processor chip and a 1-kb RAM chip. For the fabrication of these Josephson integrated circuits, a cross-shaped Nb-AlO/sub x/-Nb Josephson junction process was developed in order to realize small junction size and improve critical current uniformity, and has made fabrication of LSIs with several thousand gates possible. A latchup-free DC flip-flop is an important element in the high-speed Josephson logic and memory circuits, having been applied to an all-DC-powered Josephson RAM with asynchronous access capability. A low-inductance chip-to-chip carrier is an architectural and design concept for the Josephson computer's 1-GHz-clock operation, suppressing the crosstalk between the AC power and the output signals. Each chip is 7 mm square and is fabricated using a 2.5- mu m-rule Nb-AlO/sub x/-Nb junction process. The chips are connected on a superconducting carrier by solder bumps in a die size of 15 mm by 25 mm. The system is constructed from 8123 Josephson interferometer devices and is operable in a 1-ns cycle with 50-mW power dissipation.
Josephson gates have speed and low power dissipation, as demonstrated in a 6300-gate 8b digital signal processor and a 4kb SRAM.1 2 3 Josephson LSI chips operate up to 1GHz but their gate count and memory capacity are not sufficient to permit fabrication of computing systems using only these chips. The solution is to combine them with semiconductor chips. But, in this case, the propagation delay caused by VO cables, typically 1.3m, is a serious problem because Josephson chips must be kept at low temperature, typically 4.2K.
The authors describe a 4-bit Josephson data processor chip featuring on-chip control and data paths and near-GHz capability. It is a closed, stand-alone chip comprising a 4-bit data path and a control path and is aimed at high-speed digital signal processing. The die is 0.5 mm square, including pads, is fabricated using 2.5- mu m-rule Nb/AlO/sub x//Nb technology, and consists of 8454 Josephson junctions and 9027 resistors. The cross-shaped junction structure realizes critical current scattering of +or-6%, and a junction characteristic voltage V/sub m/ of 50 mV. A block diagram of the Josephson data processor is shown.>
High-speed operation of Josephson processors is demonstrated. They are a 4-b microprocessor, a 4-b processor, and an 8-b digital signal processor. Key technologies to realize these circuits are described from the viewpoint of circuit design. The technologies are a high-speed logic gate, named MVTL (modified variable threshold logic), and a three-phase sinusoidal power supply system. The MVTL gate has a large operating margin and high sensitivity. The MVTL gate family consists of OR, AND, 2/3 majority (MJ), and timed inverter (TI). Using these gates a variety of processors have been designed. These processors operate with three-phase power. The waveform is sinusoidal with DC-offset. This power supply system needs no latch and regulator circuit. This makes the processor very simple, and thus results in high-speed operation. To fabricate these processors, niobium junctions are very important, because they are reliable, uniform, controllable, and reproducible. High-speed gates, three-phase power supplies, and niobium junctions are indispensable for high-speed Josephson processors.
Fabrication of sub-μm Nb/Al-AlOx_xx​/Nb Josephson Junctions with Electron Beam Lithography for Qubit Applications