Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2611.16071

Mapping the High-Field Response of Superconducting Nanowire Single-Photon Detectors

Harshit Agarwal, Yueh‐Chun Wu, Katyayani Seal, Niels Noordzij, Andreas Fognini, Ronan Gourgues, Gábor B. Halász, Benjamin J. Lawrie, Nirjhar Sarkar

Published Nov 11, 2026• 0 citations
arXivHTMLPDF

Abstract

Superconducting nanowire single-photon detectors (SNSPDs) are increasingly being integrated into cryogenic quantum-sensing platforms that operate in large magnetic fields. Here, the high-field limits of these measurements were probed by characterizing the dark count response of a NbTiN SNSPD at up to 14~T using in situ control of the detector orientation and benchmarking that performance against normal detector operation in smaller magnetic fields. The detector performance is strongly anisotropic: perpendicular magnetic fields rapidly reduce the usable bias-current range, whereas near-parallel alignment enables operation at substantially larger total fields, with a finite operating margin retained to 12~T and measurable dark-count response at the 14~T field limit. The angular dependence is governed predominantly by the perpendicular component of the magnetic field, consistent with vortex-mediated suppression of the superconducting current scale. The same field-dependent current scale also determines the electrical pulse amplitude, linking high-field detector operation directly to readout performance. These results establish a practical route for deploying SNSPDs in multi-tesla quantum-sensing and high-field cryogenic experiments.

DOI
10.48550/arxiv.2611.16071

Related papers

Multifunctional Superconducting Nanowire Quantum Sensors

Benjamin J. Lawrie, Claire E. Marvinney, Yun‐Yi Pai +6 more

Superconducting nanowire single-photon detectors (SNSPDs) offer high-quantum-efficiency and low-dark-count-rate single-photon detection. In a growing number of cases, large magnetic fields are being incorporated into quantum microscopes, nanophotonic devices, and sensors for nuclear and high-energy physics that rely on SNSPDs, but superconducting devices generally perform poorly in large magnetic fields. Here, we demonstrate robust performance of amorphous SNSPDs in magnetic fields of up to $\ifmmode\pm\else\textpm\fi{}6$ T with a negligible dark-count rate and unchanged quantum efficiency at typical bias currents. Critically, we also show that the SNSPD can be used as a magnetometer with a sensitivity of better than $100\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{T}/\sqrt{\mathrm{Hz}}$ and as a thermometer with a sensitivity of $20\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{K}/\sqrt{\mathrm{Hz}}$ at 1 K. Thus, a single-photon detector integrated into a quantum device can be used as a multifunctional quantum sensor capable of describing the temperature and magnetic field on chip simply by varying the bias current to change the operating modality from single-photon detection to thermometry or magnetometry.

arXiv:2103.09896•Physical Review Applied•Dec 23, 2021•9 citations

Geometry-enabled magnetic resilience in superconducting nanowire single-photon detectors

Marinus C. van der Maas, Lin Jin, Ilhan Tunç +7 more

While magnetic fields and superconductors are both central to classical and quantum technologies, their combined use is often challenging, as magnetic fields significantly affect superconducting device performance. In superconducting nanowire single-photon detectors (SNSPDs), magnetic fields drastically reduce detection efficiencies, hampering their application in magnetically-active classical and quantum photonics. Here, we systematically characterize the performance of NbTiN SNSPDs under magnetic fields and show the enhancement of their intrinsic detection efficiency (IDE) at lower bias currents and its suppression at higher currents. This leads to SNSPD performance degradation through reduced or disappearing saturation plateaus. We show that the magnitude of this degradation is highly dependent on nanowire width and demonstrate width-optimized SNSPDs with saturating IDE for a wide range of photon energies under application-relevant magnetic fields. Minimizing degradation in superconducting devices under magnetic fields enables applications like detector-integrated spin-optic and atomic quantum processors, high-sensitivity magnetometry, and quantum transduction.

cond-mat.supr-conCross-listedarXiv:2605.10968•May 11, 2026•0 citations

Reaching the intrinsic performance limits of superconducting nanowire single-photon detectors up to 0.1 mm wide

Kristen M. Parzuchowski, Eli Mueller, Bakhrom G. Oripov +13 more

Superconducting nanowire single-photon detectors (SNSPDs) combine high detection efficiency, low noise, and excellent timing resolution, making them a leading platform for photon-counting applications. However, despite decades of materials and fabrication research, detector performance has never been shown to match theoretical performance expectations. Here, we demonstrate for the first time in situ tuning of a detector from its typical, suboptimal operation, to a regime limited only by material quality, allowing the device to reach its intrinsic performance limit. Our approach is based on current-biased superconducting "rails" placed on either side of the detector that redistribute current across its width to achieve its peak performance. This technique reduces the dark count rate by ten orders of magnitude. Further, we show operation at this intrinsic performance limit for devices up to 0.1 mm wide, and also demonstrate near-unity internal detection efficiency (IDE) at a wavelength of 4um for a 20um-wide detector--a factor of 20 wider than the current state of the art. This work enables future detectors to overcome the Pearl limit for device width, paving the way for arbitrarily large detectors.

cond-mat.supr-conCross-listedarXiv:2601.15971•Optica•Jan 23, 2026•5 citations

Waveform analysis of a large-area superconducting nanowire single photon detector

Claire E. Marvinney, Brian Lerner, Alexander A Puretzky +2 more

Abstract Superconducting nanowire single photon detectors (SNSPDs) are typically used as single-mode-fiber-coupled single-pixel detectors, but large area detectors are increasingly critical for applications ranging from microscopy to free-space quantum communications. However, the long meander-line length of such large-area SNSPDs results in a proportionately large kinetic inductance that affects the waveform generated by the device. Here, we explore changes in the rising edge of the readout pulse for a single-pixel large-area SNSPD as a function of the optical spot size on the detector and compare to the rising edge of the dark-count waveform. We observe a bimodal distribution of bright-count rise times and show that the probability of a slow rise time increases in the limit of large spot sizes, indicative of a position sensitive response. Additionally, in the limit of low bias currents, the dark-count readout pulse is most similar to the large spot-size bright-count readout pulse, which suggests that dark counts arise from locations spanning the device. These results are consistent with a simple model of traveling microwave modes excited by single photons incident at varying positions along the length of the nanowire.

arXiv:2006.00126•Superconductor Science and Technology•Dec 7, 2020•9 citations

Enhancement of photon detection in superconducting nanowire single photon detector exposed to oscillating magnetic field

Ilan Hakimi, Naor Vardi, Amos Sharoni +2 more

We measured the photon count rate (PCR) and dark count rate (DCR) of a superconducting nanowire single photon detector (SNSPD) exposed to either a DC magnetic field (up to 60 mT) or to a low-amplitude oscillating field (0.12–0.48 mT, up to 50 kHz). In both cases, the results show an increase in the PCR and the DCR as the DC field or the frequency of the AC field increase. However, the ratio DCR/(PCR + DCR) increases significantly with an increasing DC field, whereas this ratio is approximately constant as the frequency of the AC field increases up to frequencies in the kHz regime. The results suggest a more favorable effect of AC fields on the operation of the SNSPD.

Applied Physics Letters•Jun 7, 2021•3 citations

Progress and applications of superconducting-nanowire single-photon detectors

Muyun Lin

Photon detectors connect optical and electrical systems by converting light to electrical signals. Single photon detectors detect single photons which measure ultra-weak light. Traditional semiconductor single-photon detectors suffer from high dark count rates, low infrared detection efficiency, and poor temporal resolution. Superconducting-nanowire single-photon detectors (SNSPDs) overcome these limitations using the hotspot effect. SNSPDs have created a solid foundation for optical technologies and become key in quantum information, LiDARs and Deep-Space Communications. This paper reviews working principles and performance metrics: system detection efficiency, dark count rate, recovery time, and timing jitter. The study summarizes applications in quantum information (quantum key distribution, optical quantum computing), single-photon LiDAR, and deep-space optical communication, replacing most single-photon avalanche diodes (SPADs). Recent experiments show that SNSPD-based systems can achieve meter-scale detection of sea fog, interplanetary laser communication over billions of kilometers, and boson sampling with 20 photons. Ongoing research is expected to improve performance in maximum count rate, system integration, and cryogenic operation, as well as to find applications in emerging fields such as environmental monitoring.

Science and Technology of Engineering Chemistry and Environmental Protection•Aug 13, 2026•0 citations
Superconducting nanowire single-photon detectors (SNSPDs) are increasingly being integrated into cryogenic quantum-sensing platforms that operate in large magnetic fields. Here, the high-field limits of these measurements were probed by characterizing the dark count response of a NbTiN SNSPD at up to 14T using in situ control of the detector orientation and benchmarking that performance against normal detector operation in smaller magnetic fields. The detector performance is strongly anisotropic: perpendicular magnetic fields rapidly reduce the usable bias-current range, whereas near-parallel alignment enables operation at substantially larger total fields, with a finite operating margin retained to 12T and measurable dark-count response at the 14~T field limit. The angular dependence is governed predominantly by the perpendicular component of the magnetic field, consistent with vortex-mediated suppression of the superconducting current scale. The same field-dependent current scale also determines the electrical pulse amplitude, linking high-field detector operation directly to readout performance. These results establish a practical route for deploying SNSPDs in multi-tesla quantum-sensing and high-field cryogenic experiments.
Superconducting nanowire single-photon detectors (SNSPDs) offer high-quantum-efficiency and low-dark-count-rate single-photon detection. In a growing number of cases, large magnetic fields are being incorporated into quantum microscopes, nanophotonic devices, and sensors for nuclear and high-energy physics that rely on SNSPDs, but superconducting devices generally perform poorly in large magnetic fields. Here, we demonstrate robust performance of amorphous SNSPDs in magnetic fields of up to $\ifmmode\pm\else\textpm\fi{}6$ T with a negligible dark-count rate and unchanged quantum efficiency at typical bias currents. Critically, we also show that the SNSPD can be used as a magnetometer with a sensitivity of better than $100\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{T}/\sqrt{\mathrm{Hz}}$ and as a thermometer with a sensitivity of $20\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{K}/\sqrt{\mathrm{Hz}}$ at 1 K. Thus, a single-photon detector integrated into a quantum device can be used as a multifunctional quantum sensor capable of describing the temperature and magnetic field on chip simply by varying the bias current to change the operating modality from single-photon detection to thermometry or magnetometry.
While magnetic fields and superconductors are both central to classical and quantum technologies, their combined use is often challenging, as magnetic fields significantly affect superconducting device performance. In superconducting nanowire single-photon detectors (SNSPDs), magnetic fields drastically reduce detection efficiencies, hampering their application in magnetically-active classical and quantum photonics. Here, we systematically characterize the performance of NbTiN SNSPDs under magnetic fields and show the enhancement of their intrinsic detection efficiency (IDE) at lower bias currents and its suppression at higher currents. This leads to SNSPD performance degradation through reduced or disappearing saturation plateaus. We show that the magnitude of this degradation is highly dependent on nanowire width and demonstrate width-optimized SNSPDs with saturating IDE for a wide range of photon energies under application-relevant magnetic fields. Minimizing degradation in superconducting devices under magnetic fields enables applications like detector-integrated spin-optic and atomic quantum processors, high-sensitivity magnetometry, and quantum transduction.
Superconducting nanowire single-photon detectors (SNSPDs) combine high detection efficiency, low noise, and excellent timing resolution, making them a leading platform for photon-counting applications. However, despite decades of materials and fabrication research, detector performance has never been shown to match theoretical performance expectations. Here, we demonstrate for the first time in situ tuning of a detector from its typical, suboptimal operation, to a regime limited only by material quality, allowing the device to reach its intrinsic performance limit. Our approach is based on current-biased superconducting "rails" placed on either side of the detector that redistribute current across its width to achieve its peak performance. This technique reduces the dark count rate by ten orders of magnitude. Further, we show operation at this intrinsic performance limit for devices up to 0.1 mm wide, and also demonstrate near-unity internal detection efficiency (IDE) at a wavelength of 4um for a 20um-wide detector--a factor of 20 wider than the current state of the art. This work enables future detectors to overcome the Pearl limit for device width, paving the way for arbitrarily large detectors.
Abstract Superconducting nanowire single photon detectors (SNSPDs) are typically used as single-mode-fiber-coupled single-pixel detectors, but large area detectors are increasingly critical for applications ranging from microscopy to free-space quantum communications. However, the long meander-line length of such large-area SNSPDs results in a proportionately large kinetic inductance that affects the waveform generated by the device. Here, we explore changes in the rising edge of the readout pulse for a single-pixel large-area SNSPD as a function of the optical spot size on the detector and compare to the rising edge of the dark-count waveform. We observe a bimodal distribution of bright-count rise times and show that the probability of a slow rise time increases in the limit of large spot sizes, indicative of a position sensitive response. Additionally, in the limit of low bias currents, the dark-count readout pulse is most similar to the large spot-size bright-count readout pulse, which suggests that dark counts arise from locations spanning the device. These results are consistent with a simple model of traveling microwave modes excited by single photons incident at varying positions along the length of the nanowire.
We measured the photon count rate (PCR) and dark count rate (DCR) of a superconducting nanowire single photon detector (SNSPD) exposed to either a DC magnetic field (up to 60 mT) or to a low-amplitude oscillating field (0.12–0.48 mT, up to 50 kHz). In both cases, the results show an increase in the PCR and the DCR as the DC field or the frequency of the AC field increase. However, the ratio DCR/(PCR + DCR) increases significantly with an increasing DC field, whereas this ratio is approximately constant as the frequency of the AC field increases up to frequencies in the kHz regime. The results suggest a more favorable effect of AC fields on the operation of the SNSPD.
Photon detectors connect optical and electrical systems by converting light to electrical signals. Single photon detectors detect single photons which measure ultra-weak light. Traditional semiconductor single-photon detectors suffer from high dark count rates, low infrared detection efficiency, and poor temporal resolution. Superconducting-nanowire single-photon detectors (SNSPDs) overcome these limitations using the hotspot effect. SNSPDs have created a solid foundation for optical technologies and become key in quantum information, LiDARs and Deep-Space Communications. This paper reviews working principles and performance metrics: system detection efficiency, dark count rate, recovery time, and timing jitter. The study summarizes applications in quantum information (quantum key distribution, optical quantum computing), single-photon LiDAR, and deep-space optical communication, replacing most single-photon avalanche diodes (SPADs). Recent experiments show that SNSPD-based systems can achieve meter-scale detection of sea fog, interplanetary laser communication over billions of kilometers, and boson sampling with 20 photons. Ongoing research is expected to improve performance in maximum count rate, system integration, and cryogenic operation, as well as to find applications in emerging fields such as environmental monitoring.