Quantum error correction can suppress logical errors exponentially with code distance when physical noise is below threshold. Realizing this on hardware requires tight coordination among quantum gates, mid-circuit measurements, and qubit coherence. Device variation, noise asymmetry, and correlations across space and time complicate the translation of these capabilities into logical error suppression. Here, we study rotated surface-code memory on an IBM Nighthawk r2 processor. Performance varies across tested processor placements, which we attribute to differences in qubit quality. We optimize the code by combining short readout, fused measurement and reset, and an XX echo on data qubits during ancilla readout. Compared with standard readout without reset or echo, the optimized syndrome extraction circuit reduces the median per-round logical error rate by factors of 3.8 in the X basis and 1.4 in the Z basis. In memory experiments of up to 150 rounds, the distance advantage weakens, alongside long-lived correlations that may reflect a persistent error component. Under our optimization recipe, increasing the protected distance from 3 to 6 while holding the other distance fixed reduces the per-round logical error rate from 0.53% to 0.24% in Z memory and from 0.52% to 0.22% in X memory. The corresponding error-suppression factors under maximum-likelihood decoding are 1.68 and 1.85. These results connect circuit compilation and optimization to surface-code memory performance and limitations, and motivate QPU and QEC circuit codesign for fault-tolerant quantum computing primitives on current cloud hardware.
Quantum error correction can suppress logical errors exponentially with code distance when physical noise is below threshold. Realizing this on hardware requires tight coordination among quantum gates, mid-circuit measurements, and qubit coherence. Device variation, noise asymmetry, and correlations across space and time complicate the translation of these capabilities into logical error suppression. Here, we study rotated surface-code memory on an IBM Nighthawk r2 processor. Performance varies across tested processor placements, which we attribute to differences in qubit quality. We optimize the code by combining short readout, fused measurement and reset, and an XX echo on data qubits during ancilla readout. Compared with standard readout without reset or echo, the optimized syndrome extraction circuit reduces the median per-round logical error rate by factors of 3.8 in the X basis and 1.4 in the Z basis. In memory experiments of up to 150 rounds, the distance advantage weakens, alongside long-lived correlations that may reflect a persistent error component. Under our optimization recipe, increasing the protected distance from 3 to 6 while holding the other distance fixed reduces the per-round logical error rate from 0.53% to 0.24% in Z memory and from 0.52% to 0.22% in X memory. The corresponding error-suppression factors under maximum-likelihood decoding are 1.68 and 1.85. These results connect circuit compilation and optimization to surface-code memory performance and limitations, and motivate QPU and QEC circuit codesign for fault-tolerant quantum computing primitives on current cloud hardware.
Long-lived logical qubits are essential for fault-tolerant quantum computation. However, the practical performance of traditional error correction protocols relies on performing specific syndrome circuits, causing vulnerability to hardware defects and imposing rigid connectivity constraints. Recent theoretical findings have proposed that flexible subroutine circuits within the LUCI framework can maintain space-time distance in the presence of isolated or broken components, albeit at the expense of temporal distance. However, these approaches have solely targeted defect avoidance and have not yet been demonstrated to suppress errors with reduced temporal distances on physical hardware. In this work, we propose a reset-free scenario for the LUCI framework and experimentally benchmark it on IBM quantum hardware. By asymmetrically scaling the X or Z distance, we compare our reset-free approach against the standard surface code and successfully demonstrate error suppression ratios for targeted logical Pauli errors. Remarkably, despite a nearly halved syndrome density in time, which requires two subroutine rounds for full syndrome extraction, the LUCI framework remains competitive with the rotated surface code implementation. In the LUCI framework, we observe error suppression of 1.75(10) for logical X errors and 1.93(12) for logical Z errors, whereas the standard approach yields $ 1.58(13)$ and 2.44(7), respectively. These results demonstrate that dynamic codes outperform standard methods by avoiding highly noisy components, even without physical defects, while preserving logical boundaries. Our findings challenge the conventional dependency on static fault-tolerant architectures by verifying the feasibility and efficacy of the LUCI framework on physical hardware and pave the way for hybrid, hardware-compatible code designs in quantum computing.
Quantum error correction [1, 2, 3, 4] provides a path to reach practical quantum computing by combining multiple physical qubits into a logical qubit, where the logical error rate is suppressed exponentially as more qubits are added. However, this exponential suppression only occurs if the physical error rate is below a critical threshold. Here, we present two below-threshold surface code memories on our newest generation of superconducting processors, Willow: a distance-7 code, and a distance-5 code integrated with a real-time decoder. The logical error rate of our larger quantum memory is suppressed by a factor of Λ=2.14±0.02 when increasing the code distance by two, culminating in a 101-qubit distance-7 code with 0.143% ± 0.003% error per cycle of error correction. This logical memory is also beyond break-even, exceeding its best physical qubit’s lifetime by a factor of 2.4±0.3 . Our system maintains below-threshold performance when decoding in real time, achieving an average decoder latency of 63 μs at distance-5 up to a million cycles, with a cycle time of 1.1 μs. We also run repetition codes up to distance-29 and find that logical performance is limited by rare correlated error events occurring approximately once every hour, or 3×109 cycles. Our results present device performance that, if scaled, could realize the operational requirements of large scale fault-tolerant quantum algorithms.
A solid-state quantum-computing architecture will require the fabrication of arrays of many coupled qubits. It is inevitable that this process will produce qubits and couplers with varying performance, with some components underperforming due to imperfect fabrication. Quantum error-correction requires high-performing components and hence these defects must be dealt with, either by adapting the code to exclude the defects, or by informing the decoder to accommodate defects in post-processing. Here we implement and compare strategies to operate distance-5 surface codes on a quantum processor consisting of a square-lattice array of 120 superconducting qubits. We demonstrate a dramatic reduction in the probability of a logical error in a memory experiment by excluding underperforming components, compared with both a standard approach of ignoring defects, and a defect-aware decoding approach. We observe up to 2.8X improvement in logical errors per round when excluding defects compared with the standard defect-ignorant approach (1.62% compared to 4.49%). In contrast, defect-aware decoding gives only modest gains. Defects are also expected to be particularly harmful for measurement-based logical operations. Using a stability experiment we show that excluding defects resurrects measurement-based logic gate performance, observing a 6.3% per-round suppression of failure rate when excluding defects, compared to zero suppression otherwise. Furthermore, we show a further substantial decrease in logical errors when using leakage post-selection in combination with our defect exclusion strategies, resulting in a distance-5 code outperforming the best distance-3 in one basis. Our experiments therefore give a proof-of-principle demonstration of the essential utility of defect exclusion methods in the scale-up of solid-state quantum computing approaches.
Quantum error correction enables scalable fault-tolerant quantum computation by suppressing logical errors exponentially with code distance once physical error rates fall below a critical threshold. Here we demonstrate below-threshold operation of triangular color codes with distances d=3,5, and 7 on Quantinuum's Helios trapped-ion quantum processor. Leveraging both circuit- and hardware- level leakage reduction schemes, we achieve logical error rates as low as 5−2+4×10−6, and demonstrate error suppression by over an order of magnitude, Λ=12−2+3, with each successive increase in code distance. Moreover, we demonstrate below threshold scaling of error rates for Clifford two-qubit randomized benchmarking circuits when encoded in d=3,5 color codes, achieving logical error rate of 7−3+3×10−5 per logical two-qubit Clifford at distance 5 with a suppression factor of Λ=9−3+8. We compare logical performance for existing near-optimal algorithmic decoders, and both convolutional neural network and transformer-based neural network decoders capable of real-time decoding an order of magnitude faster than the syndrome extraction rate. These results approach the logical error rates required for megaquop-scale quantum computation and indicate that scaled trapped-ion processors could reach application-relevant performance with substantially smaller code blocks than indicated by previous results in other qubit modalities.
Quantum error correction (QEC) enables practical quantum computing by encoding logical qubits in many physical qubits, which can exponentially suppress the logical error rate with increasing code size provided that the physical error rate is below a critical threshold. However, the leakage of quantum information from the computational subspace presents a critical challenge to the development of scalable QEC, which creates long-lived, correlated errors that spread across space and time. Here, we demonstrate a quantum memory operating below the threshold by implementing an all-microwave leakage suppression architecture on a distance-7 surface code. We achieve a logical error suppression factor of Λ=1.40(6), definitively reversing the above-threshold scaling (Λ<1) caused by unmitigated leakage. This scheme integrates a hardware-efficient leakage reduction unit for data qubits with a fast, unconditional reset for ancilla qubits, suppressing the average leakage population after 40 cycles by a factor of 72 to 6.4(5)×10^{-4}. Our results demonstrate the viability of all-microwave control architectures for suppressing critical errors at scale, paving the way for more advanced quantum error correction implementations.
Fault-tolerant quantum computation requires logical operations that manipulate encoded information while preserving quantum error-correction protection. In planar surface-code architectures, code deformation and lattice surgery provide a local, measurement-based route to such operations. Here we experimentally realize key elements of patch-based surface-code logical processing on a 107-qubit superconducting quantum processor. We first implement a reusable primitive layer comprising merge and split, patch expansion and shrinkage, and deformations mediated by domain walls and twist defects. We then compose these primitives to realize logical state routing, the logical controlled-NOT gate, and the single-qubit Hadamard and phase gates, which together form a Clifford-generating set. All operations are implemented on distance-three rotated surface-code patches with multi-round syndrome extraction and neural-network decoding, without post-selection. Our results advance superconducting surface-code experiments from protected logical memory to active, patch-based fault-tolerant logical operations.