Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2610.14472

Fast continuous ion transport through X-junctions with low motional excitation for QCCD architectures

Jie Xiao, Zhao Wang, Chenghong Zhu, Shiqiang Gao, Xin Wang, Fa Dai, Xu Wang

quant-phSubmitted Oct 10, 2026• Announced Oct 13, 2026• 0 citations
arXivHTMLPDF

Abstract

Trapped ion quantum computing based on the quantum charge coupled device (QCCD) architecture uses functional zoning and ion transport to enable high fidelity computation and all to all qubit connectivity. As trapped ion quantum processing units (QPU) scale, 90° X-junction turns account for an increasing fraction of total transport time. Frequent junction crossings, therefore, make transport speed and final phonon excitation direct determinants of quantum algorithm execution efficiency. However, complex electric fields in X-junctions complicate waveform design, making it difficult to achieve high speed and low final phonon excitation simultaneously. Here, we develop a waveform design method for low-phonon-excitation high-speed X-junction(LHX-T) transport. It integrates low barrier pseudopotential channel design using multiple radio frequency (Multi-RF), multidimensional shortcut to adiabaticity dynamics, and constrained DC voltage optimization over the entire transport sequence. This framework connects waveform design, control, and computational validation, with smooth multichannel waveforms computed rapidly through a Karush-Kuhn-Tucker(KKT) linear system. The resulting waveform transports a single $^{171}Yb^+$ ion through a 90° turn in $5μs$ at an average speed of 14.6 m/s. Over 50 consecutive round trips, the final equivalent coherent phonon number consistently stays below 0.001, with no noticeable accumulation over time. System level evaluations at the QCCD scale show that the median duration of a single execution cycle is reduced by about $30\%$ across various circuit types. The fraction of execution time spent on transport decreases from approximately $70\%$ to $55\%$. This approach offers a means of designing fast ion transport waveforms with low phonon excitation for scalable QCCD based QPUs and provides a technical basis for efficient execution of quantum algorithms.

Comments
9 pages, 6 figures, 1 table

Related papers

Closed-loop optimization of fast trapped-ion shuttling with sub-quanta excitation

Jonathan David Sterk, Henry Coakley, Joshua Goldberg +7 more

Abstract Shuttling ions at high speed and with low motional excitation is essential for realizing fast and high-fidelity algorithms in many trapped-ion-based quantum computing architectures. Achieving such performance is challenging due to the sensitivity of an ion to electric fields and the unknown and imperfect environmental and control variables that create them. Here we implement a closed-loop optimization of the voltage waveforms that control the trajectory and axial frequency of an ion during transport in order to minimize the final motional excitation. The resulting waveforms realize fast round-trip transport of a trapped ion across multiple electrodes at speeds of 0.5 electrodes per microsecond (35 m·s −1 for a one-way transport of 210 μm in 6 μs) with a maximum of 0.36 ± 0.08 mean quanta gain. This sub-quanta gain is independent of the phase of the secular motion at the distal location, obviating the need for an electric field impulse or time delay to eliminate the coherent motion.

arXiv:2201.07358•npj Quantum Information•Jun 20, 2022•27 citations

Toolchain for shuttling trapped-ion qubits in segmented traps

Andreas Conta, Santiago Bogino, Frodo Köhncke +2 more

Scalable trapped-ion quantum computing requires fast and reliable transport of ions through complex, segmented radiofrequency trap architectures without inducing excessive motional excitation. We present a numerical toolchain for the systematic generation of time-dependent electrode voltages enabling fast, low-excitation ion shuttling in segmented radiofrequency traps. Based on a model of the trap electrode geometry, the framework combines an electrostatic field solver, efficient unconstrained optimization, waveform postprocessing, and dynamical simulations of ion motion to compute voltage waveforms that realize prescribed transport trajectories while respecting experimental constraints such as voltage limits and bandwidth. The toolchain supports arbitrary trap geometries, including junctions and multi-zone layouts, and allows for the flexible incorporation of optimization objectives. We provide a detailed assessment of the accuracy of the framework by investigating its numerical stability and by comparing measured and predicted secular frequencies. The framework is optimized for numerical performance, enabling rapid numerical prototyping of trap architectures of increasing complexity. As application examples, we apply the framework to the transport of a potential well along a linear, uniformly segmented trap, and we compute a solution for shuttling a potential well around the corner of an X-type trap junction. The presented approach provides an extensible and highly efficient numerical foundation for designing and validating transport protocols in current and next-generation trapped-ion processors.

quant-pharXiv:2601.08495•Jan 14, 2026•0 citations

Toolchain for shuttling trapped-ion qubits in segmented traps

Andreas Conta, Santiago Bogino, F. Köhncke +2 more

Scalable trapped-ion quantum computing requires fast and reliable transport of ions through complex, segmented radiofrequency trap architectures without inducing excessive motional excitation. We present a numerical toolchain for the systematic generation of time-dependent electrode voltages enabling fast, low-excitation ion shuttling in segmented radiofrequency traps. Based on a model of the trap electrode geometry, the framework combines an electrostatic field solver, efficient unconstrained optimization, waveform postprocessing, and dynamical simulations of ion motion to compute voltage waveforms that realize prescribed transport trajectories while respecting experimental constraints, such as voltage limits and bandwidth. The toolchain supports arbitrary trap geometries, including junctions and multi-zone layouts, and allows for the flexible incorporation of optimization objectives. We provide a detailed assessment of the accuracy of the framework by investigating its numerical stability and by comparing measured and predicted secular frequencies. The framework is optimized for numerical performance, enabling rapid numerical prototyping of trap architectures of increasing complexity. As application examples, we apply the framework to the transport of a potential well along a linear, uniformly segmented trap, and we compute a solution for shuttling a potential well around the corner of an X-type trap junction. The presented approach provides an extensible and highly efficient numerical foundation for designing and validating transport protocols in current and next-generation trapped-ion processors.

AVS Quantum Science•May 12, 2026•0 citations

Demonstration of the trapped-ion quantum CCD computer architecture

J. M. Pino, Joan Dreiling, Caroline Figgatt +9 more

Abstract The trapped-ion quantum charge-coupled device (QCCD) proposal1, 2 lays out a blueprint for a universal quantum computer that uses mobile ions as qubits. Analogous to a charge-coupled device (CCD) camera, which stores and processes imaging information as movable electrical charges in coupled pixels, a QCCD computer stores quantum information in the internal state of electrically charged ions that are transported between different processing zones using dynamic electric fields. The promise of the QCCD architecture is to maintain the low error rates demonstrated in small trapped-ion experiments3–5 by limiting the quantum interactions to multiple small ion crystals, then physically splitting and rearranging the constituent ions of these crystals into new crystals, where further interactions occur. This approach leverages transport timescales that are fast relative to the coherence times of the qubits, the insensitivity of the qubit states of the ion to the electric fields used for transport, and the low crosstalk afforded by spatially separated crystals. However, engineering a machine capable of executing these operations across multiple interaction zones with low error introduces many difficulties, which have slowed progress in scaling this architecture to larger qubit numbers. Here we use a cryogenic surface trap to integrate all necessary elements of the QCCD architecture—a scalable trap design, parallel interaction zones and fast ion transport—into a programmable trapped-ion quantum computer that has a system performance consistent with the low error rates achieved in the individual ion crystals. We apply this approach to realize a teleported CNOT gate using mid-circuit measurement6, negligible crosstalk error and a quantum volume7 of 26 = 64. These results demonstrate that the QCCD architecture provides a viable path towards high-performance quantum computers.

•Jan 1, 2021•87 citations

Feasibility Study of 3D-Printed Micro Junction Array for Ion Trap Quantum Processor

Kento Taniguchi, Ke Sun, Shuqi Xu +6 more

We introduce an ion trap platform based on a 3D-printed micro-junction array, designed to implement quantum charge-coupled device (QCCD) architectures for large-scale quantum information processing (QIP). The integration of three-dimensionally structured micro Radio-Frequency (RF) electrodes above a surface-electrode trap enables flexible control of electric field profiles across both linear and junction regions. Through simulations, we demonstrate that the linear region exhibits deeper and more harmonic ion confinement with reduced RF drive power compared to conventional planar traps. Crucially, we identify a junction geometry that maintains uniform ion confinement during transport while substantially reducing the pseudopotential barrier. This reduction facilitates low-heating, high-fidelity transport of single- and multi-species ion crystals. Our results establish a viable route toward fault-tolerant quantum computing by enabling modular and scalable QCCD systems based on the state-of-the-art 3D-printing technologies.

arXiv:2509.17275•Sep 21, 2025•0 citations

Demonstration of the QCCD trapped-ion quantum computer architecture

Juan Miguel Rey Pino, Joan Dreiling, Caroline Figgatt +9 more

The trapped-ion QCCD (quantum charge-coupled device) architecture proposal lays out a blueprint for a universal quantum computer. The design begins with electrodes patterned on a two-dimensional surface configured to trap multiple arrays of ions (or ion crystals). Communication within the ion crystal network allows for the machine to be scaled while keeping the number of ions in each crystal to a small number, thereby preserving the low error rates demonstrated in trapped-ion experiments. By proposing to communicate quantum information by moving the ions through space to interact with other distant ions, the architecture creates a quantum computer endowed with full-connectivity. However, engineering this fully-connected computer introduces a host of difficulties that have precluded the architecture from being fully realized in the twenty years since its proposal. Using a Honeywell cryogenic surface trap, we report on the integration of all necessary ingredients of the QCCD architecture into a programmable trapped-ion quantum computer. Using four and six qubit circuits, the system level performance of the processor is quantified by the fidelity of a teleported CNOT gate utilizing mid-circuit measurement and a quantum volume measurement of $2^6=64$. By demonstrating that the low error rates achievable in small ion crystals can be successfully integrated with a scalable trap design, parallel optical delivery, and fast ion transport, the QCCD architecture is shown to be a viable path toward large quantum computers. Atomic ions provide perfectly identical, high-fidelity qubits. Our work shows that the QCCD architecture built around these qubits will provide high performance quantum computers, likely enabling important near-term demonstrations such as quantum error correction and quantum advantage.

•Mar 3, 2020•43 citations
Trapped ion quantum computing based on the quantum charge coupled device (QCCD) architecture uses functional zoning and ion transport to enable high fidelity computation and all to all qubit connectivity. As trapped ion quantum processing units (QPU) scale, 90° X-junction turns account for an increasing fraction of total transport time. Frequent junction crossings, therefore, make transport speed and final phonon excitation direct determinants of quantum algorithm execution efficiency. However, complex electric fields in X-junctions complicate waveform design, making it difficult to achieve high speed and low final phonon excitation simultaneously. Here, we develop a waveform design method for low-phonon-excitation high-speed X-junction(LHX-T) transport. It integrates low barrier pseudopotential channel design using multiple radio frequency (Multi-RF), multidimensional shortcut to adiabaticity dynamics, and constrained DC voltage optimization over the entire transport sequence. This framework connects waveform design, control, and computational validation, with smooth multichannel waveforms computed rapidly through a Karush-Kuhn-Tucker(KKT) linear system. The resulting waveform transports a single 171Yb+^{171}Yb^+171Yb+ ion through a 90° turn in 5μs5μs5μs at an average speed of 14.6 m/s. Over 50 consecutive round trips, the final equivalent coherent phonon number consistently stays below 0.001, with no noticeable accumulation over time. System level evaluations at the QCCD scale show that the median duration of a single execution cycle is reduced by about 30%30\%30% across various circuit types. The fraction of execution time spent on transport decreases from approximately 70%70\%70% to 55%55\%55%. This approach offers a means of designing fast ion transport waveforms with low phonon excitation for scalable QCCD based QPUs and provides a technical basis for efficient execution of quantum algorithms.
Abstract Shuttling ions at high speed and with low motional excitation is essential for realizing fast and high-fidelity algorithms in many trapped-ion-based quantum computing architectures. Achieving such performance is challenging due to the sensitivity of an ion to electric fields and the unknown and imperfect environmental and control variables that create them. Here we implement a closed-loop optimization of the voltage waveforms that control the trajectory and axial frequency of an ion during transport in order to minimize the final motional excitation. The resulting waveforms realize fast round-trip transport of a trapped ion across multiple electrodes at speeds of 0.5 electrodes per microsecond (35 m·s −1 for a one-way transport of 210 μm in 6 μs) with a maximum of 0.36 ± 0.08 mean quanta gain. This sub-quanta gain is independent of the phase of the secular motion at the distal location, obviating the need for an electric field impulse or time delay to eliminate the coherent motion.
Scalable trapped-ion quantum computing requires fast and reliable transport of ions through complex, segmented radiofrequency trap architectures without inducing excessive motional excitation. We present a numerical toolchain for the systematic generation of time-dependent electrode voltages enabling fast, low-excitation ion shuttling in segmented radiofrequency traps. Based on a model of the trap electrode geometry, the framework combines an electrostatic field solver, efficient unconstrained optimization, waveform postprocessing, and dynamical simulations of ion motion to compute voltage waveforms that realize prescribed transport trajectories while respecting experimental constraints such as voltage limits and bandwidth. The toolchain supports arbitrary trap geometries, including junctions and multi-zone layouts, and allows for the flexible incorporation of optimization objectives. We provide a detailed assessment of the accuracy of the framework by investigating its numerical stability and by comparing measured and predicted secular frequencies. The framework is optimized for numerical performance, enabling rapid numerical prototyping of trap architectures of increasing complexity. As application examples, we apply the framework to the transport of a potential well along a linear, uniformly segmented trap, and we compute a solution for shuttling a potential well around the corner of an X-type trap junction. The presented approach provides an extensible and highly efficient numerical foundation for designing and validating transport protocols in current and next-generation trapped-ion processors.
Scalable trapped-ion quantum computing requires fast and reliable transport of ions through complex, segmented radiofrequency trap architectures without inducing excessive motional excitation. We present a numerical toolchain for the systematic generation of time-dependent electrode voltages enabling fast, low-excitation ion shuttling in segmented radiofrequency traps. Based on a model of the trap electrode geometry, the framework combines an electrostatic field solver, efficient unconstrained optimization, waveform postprocessing, and dynamical simulations of ion motion to compute voltage waveforms that realize prescribed transport trajectories while respecting experimental constraints, such as voltage limits and bandwidth. The toolchain supports arbitrary trap geometries, including junctions and multi-zone layouts, and allows for the flexible incorporation of optimization objectives. We provide a detailed assessment of the accuracy of the framework by investigating its numerical stability and by comparing measured and predicted secular frequencies. The framework is optimized for numerical performance, enabling rapid numerical prototyping of trap architectures of increasing complexity. As application examples, we apply the framework to the transport of a potential well along a linear, uniformly segmented trap, and we compute a solution for shuttling a potential well around the corner of an X-type trap junction. The presented approach provides an extensible and highly efficient numerical foundation for designing and validating transport protocols in current and next-generation trapped-ion processors.
Abstract The trapped-ion quantum charge-coupled device (QCCD) proposal1, 2 lays out a blueprint for a universal quantum computer that uses mobile ions as qubits. Analogous to a charge-coupled device (CCD) camera, which stores and processes imaging information as movable electrical charges in coupled pixels, a QCCD computer stores quantum information in the internal state of electrically charged ions that are transported between different processing zones using dynamic electric fields. The promise of the QCCD architecture is to maintain the low error rates demonstrated in small trapped-ion experiments3–5 by limiting the quantum interactions to multiple small ion crystals, then physically splitting and rearranging the constituent ions of these crystals into new crystals, where further interactions occur. This approach leverages transport timescales that are fast relative to the coherence times of the qubits, the insensitivity of the qubit states of the ion to the electric fields used for transport, and the low crosstalk afforded by spatially separated crystals. However, engineering a machine capable of executing these operations across multiple interaction zones with low error introduces many difficulties, which have slowed progress in scaling this architecture to larger qubit numbers. Here we use a cryogenic surface trap to integrate all necessary elements of the QCCD architecture—a scalable trap design, parallel interaction zones and fast ion transport—into a programmable trapped-ion quantum computer that has a system performance consistent with the low error rates achieved in the individual ion crystals. We apply this approach to realize a teleported CNOT gate using mid-circuit measurement6, negligible crosstalk error and a quantum volume7 of 26 = 64. These results demonstrate that the QCCD architecture provides a viable path towards high-performance quantum computers.
We introduce an ion trap platform based on a 3D-printed micro-junction array, designed to implement quantum charge-coupled device (QCCD) architectures for large-scale quantum information processing (QIP). The integration of three-dimensionally structured micro Radio-Frequency (RF) electrodes above a surface-electrode trap enables flexible control of electric field profiles across both linear and junction regions. Through simulations, we demonstrate that the linear region exhibits deeper and more harmonic ion confinement with reduced RF drive power compared to conventional planar traps. Crucially, we identify a junction geometry that maintains uniform ion confinement during transport while substantially reducing the pseudopotential barrier. This reduction facilitates low-heating, high-fidelity transport of single- and multi-species ion crystals. Our results establish a viable route toward fault-tolerant quantum computing by enabling modular and scalable QCCD systems based on the state-of-the-art 3D-printing technologies.
The trapped-ion QCCD (quantum charge-coupled device) architecture proposal lays out a blueprint for a universal quantum computer. The design begins with electrodes patterned on a two-dimensional surface configured to trap multiple arrays of ions (or ion crystals). Communication within the ion crystal network allows for the machine to be scaled while keeping the number of ions in each crystal to a small number, thereby preserving the low error rates demonstrated in trapped-ion experiments. By proposing to communicate quantum information by moving the ions through space to interact with other distant ions, the architecture creates a quantum computer endowed with full-connectivity. However, engineering this fully-connected computer introduces a host of difficulties that have precluded the architecture from being fully realized in the twenty years since its proposal. Using a Honeywell cryogenic surface trap, we report on the integration of all necessary ingredients of the QCCD architecture into a programmable trapped-ion quantum computer. Using four and six qubit circuits, the system level performance of the processor is quantified by the fidelity of a teleported CNOT gate utilizing mid-circuit measurement and a quantum volume measurement of 26=642^6=6426=64. By demonstrating that the low error rates achievable in small ion crystals can be successfully integrated with a scalable trap design, parallel optical delivery, and fast ion transport, the QCCD architecture is shown to be a viable path toward large quantum computers. Atomic ions provide perfectly identical, high-fidelity qubits. Our work shows that the QCCD architecture built around these qubits will provide high performance quantum computers, likely enabling important near-term demonstrations such as quantum error correction and quantum advantage.