© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:2607.08530

The Langevin-equation description of optomechanics with the dispersive and dissipative optomechanical coupling

Alexander K. Tagantsev

quant-phSubmitted Jul 9, 2026• Announced Jul 10, 2026

v1 · Jul 9, 2026 v2 · Jul 17, 2026

Abstract

The description of the optomechanical system is commonly based on the quantum Langevin equation formalism. This framework is introduced phenomenologically or based on a model Hamiltonian. However, once dealing with the optomechanical Fabry-Perot cavity or the modified Michelson-Sagnac interferometer with a semitransparent mechanically active membrane inside, a model-free consideration is also possible by using an alternative approach. Such an approach, which is based on the classical wave equations in the systems, is popular in the gravitational-wave community where it is termed as input-output relations approach. In this work, using the aforementioned approach, we derived the equations for the ladder operator of the intracavity field, stochastic back-action force, and the relation between the fields at the input mirror. Then we simplified the obtained results down to the range of applicability of the Langevin equation formalism and compared these with the corresponding predictions of the latter formalism. This enabled us to critically assess the validity of the Langevin equation formalism and rectify its range of applicability. In the case where the dissipative optomechanical coupling is involved we identified appreciable problems with this formalism. We found that, disregarding the fact that decay rate of the optomechanical Fabry-Perot cavity depends on its length, no dissipative optomechanical coupling is generated. This is in contrast with the prediction of the standard Langevin-equation based treatment. We found that, staying inside the range of applicability of the Langevin equation formalism, the relation between the fields at the input mirror may not be correct. We found that the Langevin equation formalism misses a phase factor at the input field, this factor turns out to be important for the situation involving the dissipative optomechanical coupling.

Related papers

Quantum optomechanics with arbitrary mirror displacement: nonlinear Langevin equation with non-Markovian back-action noises

Adrian E. Rubio Lopez, Hing-Tong Cho, Bei-Lok Hu

Quantum optomechanics (QOM) explores the interaction between a quantum field, often confined in a cavity, and the quantum motion of mirrors, membranes or material media, usually assumed slow enough with negligible particle production, which is the central concern of dynamical Casimir effects, and a drive laser field for effective control. This rapidly developing field has a wide range of applications, from quantum sensing to the detection of gravitational waves. Because the opto-mechanical coupling is nonlinear, most theoretical investigations assume that the amplitude of mirror motion $x$ remains small. Recent years saw several papers treating $x^2, x^3$ orders in the mirror displacement. In our work we take a different route, deploying the functional perturbative method presented in [1] and enriched in [2], applicable for sufficiently weak opto-mechanical couplings. With this we can treat arbitrary displacement of the mirror, not just at a higher order in a power series expansion in $x$. We first derive the influence action of the quantum field and its non-Markovian noises back-reacting on the moving mirror with self-consistency. From it we derive a nonlinear Langevin equation driven by these back-action noises from the quantum field. We then show how results from our general modeling and treatment can be linked with the models and the Langevin equations presented in the literature, starting with the popular radiation pressure $Nx$ coupling, with $N$ the photon number, up to the recent $x^3$ order results. We hope this new approach and the results presented here can provide useful theoretical support for high precision QOM experimentation in the future.

quant-pharXiv:2608.29429•Sep 1, 2026

Quantum Langevin equations for optomechanical systems

Alberto Barchielli, Bassano Vacchini

We provide a fully quantum description of a mechanical oscillator in the presence of thermal environmental noise by means of a quantum Langevin formulation based on quantum stochastic calculus. The system dynamics is determined by symmetry requirements and equipartition at equilibrium, while the environment is described by quantum Bose fields in a suitable non-Fock representation which allows for the introduction of temperature. A generic spectral density of the environment can be described by introducing its state through a suitable P -representation. Including interaction of the mechanical oscillator with a cavity mode via radiation pressure we obtain a description of a simple optomechanical system in which, besides the Langevin equations for the system, one has the exact input–output relations for the quantum noises. The whole theory is valid at arbitrarily low temperature. This allows the exact calculation of the stationary value of the mean energy of the mechanical oscillator, as well as both homodyne and heterodyne spectra. The present analysis allows in particular to study possible cooling scenarios and to obtain the exact connection between observed spectra and fluctuation spectra of the position of the mechanical oscillator.

arXiv:1503.06547•New Journal of Physics•Aug 3, 2015•30 citations

Two-timescale stochastic Langevin propagation for classical and quantum optomechanics

Muhammad Javed Akram, Erika B. Aranas, Nathanaël P. Bullier +2 more

Interesting experimental signatures of quantum cavity optomechanics arise because the quantum back-action induces correlations between incident quantum shot noise and the cavity field. While the quantum linear theory of optomechanics (QLT) has provided vital understanding across many experimental platforms, in certain new setups it may be insufficient: analysis in the time domain may be needed, but QLT obtains only spectra in frequency space; and nonlinear behavior may be present. Direct solution of the stochastic equations of motion in time is an alternative, but unfortunately standard methods do not preserve the important optomechanical correlations. We introduce two-timescale stochastic Langevin (T2SL) propagation as an efficient and straightforward method to obtain time traces with the correct correlations. We show that T2SL, in contrast to standard stochastic simulations, can efficiently simulate correlation phenomena such as ponderomotive squeezing and reproduces accurately cavity sideband structures on the scale of the applied quantum noise and even complex features entirely submerged below the quantum shot noise imprecision floor. We investigate nonlinear regimes and find that, where comparison is possible, the method agrees with analytical results obtained with master equations at low temperatures and in perturbative regimes.

arXiv:1801.08700•Physical Review A•Dec 19, 2018•1 citation

Optomechanical damping basis

Juan Mauricio Torres, Ralf Betzholz, Marc Bienert

Abstract We present a closed-form analytical solution to the eigenvalue problem of the Liouville operator generating the dissipative dynamics of the standard optomechanical system. The corresponding Lindblad master equation describes the dynamics of a single-mode field inside an optical cavity coupled by radiation pressure to its moving mirror. The optical field and the mirror are in contact with separate environments, which are assumed at zero and finite temperature, respectively. The optomechanical damping basis refers to the exact set of eigenvectors of the generator that, together with the exact eigenvalues, are explicitly derived. Both the weak- and the strong-coupling regime, which includes combined decay mechanisms, are solved in this work.

arXiv:1809.03693•Journal of Physics A Mathematical and Theoretical•Jan 18, 2019•13 citations

Master-equation treatment of nonlinear optomechanical systems with optical loss

Sofia Qvarfort, Michael Ross Vanner, P. F. Barker +1 more

Open-system dynamics play a key role in the experimental and theoretical study of cavity optomechanical systems. In many cases, the quantum Langevin equations have enabled excellent models for optical decoherence, yet a master-equation approach to the fully nonlinear optomechanical Hamiltonian has thus far proven more elusive. To address this outstanding question and broaden the mathematical tool set available, we derive a solution to the Lindblad master equation that models optical decoherence for a system evolving with the nonlinear optomechanical Hamiltonian. The method combines a Lie-algebra solution to the unitary dynamics with a vectorization of the Lindblad equation, and we demonstrate its applicability by considering the preparation of optical cat states via the optomechanical nonlinearity in the presence of optical loss. Our results provide a direct way of analytically assessing the impact of optical decoherence on the optomechanical intracavity state.

arXiv:2009.02295•Physical Review A•Jul 2, 2021•23 citations

Strong and noise-tolerant entanglement in dissipative optomechanics

Jiaojiao Chen, Wei Xiong, Dong Wang +1 more

Macroscopic entanglement, as a critical quantum resource in quantum information science, has been extensively studied in coherent optomechanics over the past decades. However, entanglement in dissipative optomechanics, where the cavity linewidth depends on the position of the mechanical resonator, remains largely unexplored. In this work, we investigate quantum entanglement in a dissipative optomechanical system realized by a Michelson-Sagnac interferometer with a movable membrane. This configuration enables the switching between coherent and dissipative optomechanical couplings at will. With experimentally feasible parameters, we demonstrate that the steady-state mechanical displacement exhibits a nonlinear (linear) dependence on the driving power under coherent (dissipative) coupling. Furthermore, we show that the quantum entanglement generated via dissipative coupling is significantly stronger and more robust to noise than that generated via coherent coupling. When both coherent and dissipative couplings are simultaneously present, the entanglement is weakened due to quantum interference. Our results indicate that dissipative optomechanical coupling can be a promising route for engineering strong and noise-resilient quantum entanglement.

arXiv:2501.09541•Physical Review A•May 13, 2025•4 citations

The description of the optomechanical system is commonly based on the quantum Langevin equation formalism. This framework is introduced phenomenologically or based on a model Hamiltonian. However, once dealing with the optomechanical Fabry-Perot cavity or the modified Michelson-Sagnac interferometer with a semitransparent mechanically active membrane inside, a model-free consideration is also possible by using an alternative approach. Such an approach, which is based on the classical wave equations in the systems, is popular in the gravitational-wave community where it is termed as input-output relations approach. In this work, using the aforementioned approach, we derived the equations for the ladder operator of the intracavity field, stochastic back-action force, and the relation between the fields at the input mirror. Then we simplified the obtained results down to the range of applicability of the Langevin equation formalism and compared these with the corresponding predictions of the latter formalism. This enabled us to critically assess the validity of the Langevin equation formalism and rectify its range of applicability. In the case where the dissipative optomechanical coupling is involved we identified appreciable problems with this formalism. We found that, disregarding the fact that decay rate of the optomechanical Fabry-Perot cavity depends on its length, no dissipative optomechanical coupling is generated. This is in contrast with the prediction of the standard Langevin-equation based treatment. We found that, staying inside the range of applicability of the Langevin equation formalism, the relation between the fields at the input mirror may not be correct. We found that the Langevin equation formalism misses a phase factor at the input field, this factor turns out to be important for the situation involving the dissipative optomechanical coupling.

Quantum optomechanics (QOM) explores the interaction between a quantum field, often confined in a cavity, and the quantum motion of mirrors, membranes or material media, usually assumed slow enough with negligible particle production, which is the central concern of dynamical Casimir effects, and a drive laser field for effective control. This rapidly developing field has a wide range of applications, from quantum sensing to the detection of gravitational waves. Because the opto-mechanical coupling is nonlinear, most theoretical investigations assume that the amplitude of mirror motion

x

remains small. Recent years saw several papers treating

x^2, x^3

orders in the mirror displacement. In our work we take a different route, deploying the functional perturbative method presented in [1] and enriched in [2], applicable for sufficiently weak opto-mechanical couplings. With this we can treat arbitrary displacement of the mirror, not just at a higher order in a power series expansion in

x

. We first derive the influence action of the quantum field and its non-Markovian noises back-reacting on the moving mirror with self-consistency. From it we derive a nonlinear Langevin equation driven by these back-action noises from the quantum field. We then show how results from our general modeling and treatment can be linked with the models and the Langevin equations presented in the literature, starting with the popular radiation pressure

Nx

coupling, with

N

the photon number, up to the recent

x^3

order results. We hope this new approach and the results presented here can provide useful theoretical support for high precision QOM experimentation in the future.

We provide a fully quantum description of a mechanical oscillator in the presence of thermal environmental noise by means of a quantum Langevin formulation based on quantum stochastic calculus. The system dynamics is determined by symmetry requirements and equipartition at equilibrium, while the environment is described by quantum Bose fields in a suitable non-Fock representation which allows for the introduction of temperature. A generic spectral density of the environment can be described by introducing its state through a suitable P -representation. Including interaction of the mechanical oscillator with a cavity mode via radiation pressure we obtain a description of a simple optomechanical system in which, besides the Langevin equations for the system, one has the exact input–output relations for the quantum noises. The whole theory is valid at arbitrarily low temperature. This allows the exact calculation of the stationary value of the mean energy of the mechanical oscillator, as well as both homodyne and heterodyne spectra. The present analysis allows in particular to study possible cooling scenarios and to obtain the exact connection between observed spectra and fluctuation spectra of the position of the mechanical oscillator.

Interesting experimental signatures of quantum cavity optomechanics arise because the quantum back-action induces correlations between incident quantum shot noise and the cavity field. While the quantum linear theory of optomechanics (QLT) has provided vital understanding across many experimental platforms, in certain new setups it may be insufficient: analysis in the time domain may be needed, but QLT obtains only spectra in frequency space; and nonlinear behavior may be present. Direct solution of the stochastic equations of motion in time is an alternative, but unfortunately standard methods do not preserve the important optomechanical correlations. We introduce two-timescale stochastic Langevin (T2SL) propagation as an efficient and straightforward method to obtain time traces with the correct correlations. We show that T2SL, in contrast to standard stochastic simulations, can efficiently simulate correlation phenomena such as ponderomotive squeezing and reproduces accurately cavity sideband structures on the scale of the applied quantum noise and even complex features entirely submerged below the quantum shot noise imprecision floor. We investigate nonlinear regimes and find that, where comparison is possible, the method agrees with analytical results obtained with master equations at low temperatures and in perturbative regimes.

Abstract We present a closed-form analytical solution to the eigenvalue problem of the Liouville operator generating the dissipative dynamics of the standard optomechanical system. The corresponding Lindblad master equation describes the dynamics of a single-mode field inside an optical cavity coupled by radiation pressure to its moving mirror. The optical field and the mirror are in contact with separate environments, which are assumed at zero and finite temperature, respectively. The optomechanical damping basis refers to the exact set of eigenvectors of the generator that, together with the exact eigenvalues, are explicitly derived. Both the weak- and the strong-coupling regime, which includes combined decay mechanisms, are solved in this work.

Open-system dynamics play a key role in the experimental and theoretical study of cavity optomechanical systems. In many cases, the quantum Langevin equations have enabled excellent models for optical decoherence, yet a master-equation approach to the fully nonlinear optomechanical Hamiltonian has thus far proven more elusive. To address this outstanding question and broaden the mathematical tool set available, we derive a solution to the Lindblad master equation that models optical decoherence for a system evolving with the nonlinear optomechanical Hamiltonian. The method combines a Lie-algebra solution to the unitary dynamics with a vectorization of the Lindblad equation, and we demonstrate its applicability by considering the preparation of optical cat states via the optomechanical nonlinearity in the presence of optical loss. Our results provide a direct way of analytically assessing the impact of optical decoherence on the optomechanical intracavity state.

Macroscopic entanglement, as a critical quantum resource in quantum information science, has been extensively studied in coherent optomechanics over the past decades. However, entanglement in dissipative optomechanics, where the cavity linewidth depends on the position of the mechanical resonator, remains largely unexplored. In this work, we investigate quantum entanglement in a dissipative optomechanical system realized by a Michelson-Sagnac interferometer with a movable membrane. This configuration enables the switching between coherent and dissipative optomechanical couplings at will. With experimentally feasible parameters, we demonstrate that the steady-state mechanical displacement exhibits a nonlinear (linear) dependence on the driving power under coherent (dissipative) coupling. Furthermore, we show that the quantum entanglement generated via dissipative coupling is significantly stronger and more robust to noise than that generated via coherent coupling. When both coherent and dissipative couplings are simultaneously present, the entanglement is weakened due to quantum interference. Our results indicate that dissipative optomechanical coupling can be a promising route for engineering strong and noise-resilient quantum entanglement.