Interesting experimental signatures of quantum cavity optomechanics arise because the quantum back-action induces correlations between incident quantum shot noise and the cavity field. While the quantum linear theory of optomechanics (QLT) has provided vital understanding across many experimental platforms, in certain new setups it may be insufficient: analysis in the time domain may be needed, but QLT obtains only spectra in frequency space; and nonlinear behavior may be present. Direct solution of the stochastic equations of motion in time is an alternative, but unfortunately standard methods do not preserve the important optomechanical correlations. We introduce two-timescale stochastic Langevin (T2SL) propagation as an efficient and straightforward method to obtain time traces with the correct correlations. We show that T2SL, in contrast to standard stochastic simulations, can efficiently simulate correlation phenomena such as ponderomotive squeezing and reproduces accurately cavity sideband structures on the scale of the applied quantum noise and even complex features entirely submerged below the quantum shot noise imprecision floor. We investigate nonlinear regimes and find that, where comparison is possible, the method agrees with analytical results obtained with master equations at low temperatures and in perturbative regimes.
Interesting experimental signatures of quantum cavity optomechanics arise because the quantum back-action induces correlations between incident quantum shot noise and the cavity field. While the quantum linear theory of optomechanics (QLT) has provided vital understanding across many experimental platforms, in certain new setups it may be insufficient: analysis in the time domain may be needed, but QLT obtains only spectra in frequency space; and nonlinear behavior may be present. Direct solution of the stochastic equations of motion in time is an alternative, but unfortunately standard methods do not preserve the important optomechanical correlations. We introduce two-timescale stochastic Langevin (T2SL) propagation as an efficient and straightforward method to obtain time traces with the correct correlations. We show that T2SL, in contrast to standard stochastic simulations, can efficiently simulate correlation phenomena such as ponderomotive squeezing and reproduces accurately cavity sideband structures on the scale of the applied quantum noise and even complex features entirely submerged below the quantum shot noise imprecision floor. We investigate nonlinear regimes and find that, where comparison is possible, the method agrees with analytical results obtained with master equations at low temperatures and in perturbative regimes.
After a quick review of the basic theory of quantum optomechanical systems, based largely on linearized Heisenberg–Langevin equations, this chapter focuses on selected topics related to quantum measurement and quantum optomechanics. Included are: a comprehensive discussion of the quantum limit on the added noise of a continuous position detector, following the quantum linear response approach; a detailed discussion of the role of noise correlations, and how these can be achieved in an optomechanical cavity (by using squeezed input light, or by modifying the choice of measured output quadrature); and a discussion of back-action evading measurements of a mechanical quadrature, discussing how this can be achieved in a two-tone driven cavity system. The chapter ends with a quick introduction to the theory of conditional continuous quantum measurement, and a discussion on how a back-action evading measurement can be used to produce conditional mechanical squeezed states.
The description of the optomechanical systems is commonly based on the quantum Langevin equation formalism. This framework is introduced phenomenologically or based on a model Hamiltonian. However, once dealing with the optomechanical Fabry-Perot cavity or the modified Michelson-Sagnac interferometer with a semitransparent mechanically active membrane inside, a model-free consideration is also possible by using an alternative approach. Such an approach, which is based on the classical wave equations, is popular in the gravitational-wave community where it is termed as input-output relations approach. In this work, using the aforementioned approach, we derived the equations for the ladder operator of the intracavity field, stochastic back-action force, and the relation between the fields at the input mirror. Then we simplified the obtained results down to the range of applicability of the Langevin equation formalism and compared these with the corresponding predictions of the latter formalism. This enabled us to critically assess the validity of the Langevin equation formalism and rectify its range of applicability to find that the latter is more stringent than that intuitively expected. In the case where the dissipative optomechanical coupling is involved we identified appreciable problems with this formalism. It was found that, disregarding the fact that decay rate of the optomechanical Fabry-Perot cavity depends on its length, no dissipative optomechanical coupling is generated. This is in contrast with the prediction of the standard Langevin-equation based treatment. It was found that the Langevin equation formalism misses a phase factor at the input field; this factor turns out to be important for the situation involving the dissipative optomechanical coupling.
Quantum optomechanics (QOM) explores the interaction between a quantum field, often confined in a cavity, and the quantum motion of mirrors, membranes or material media, usually assumed slow enough with negligible particle production, which is the central concern of dynamical Casimir effects, and a drive laser field for effective control. This rapidly developing field has a wide range of applications, from quantum sensing to the detection of gravitational waves. Because the opto-mechanical coupling is nonlinear, most theoretical investigations assume that the amplitude of mirror motion x remains small. Recent years saw several papers treating x2,x3 orders in the mirror displacement. In our work we take a different route, deploying the functional perturbative method presented in [1] and enriched in [2], applicable for sufficiently weak opto-mechanical couplings. With this we can treat arbitrary displacement of the mirror, not just at a higher order in a power series expansion in x. We first derive the influence action of the quantum field and its non-Markovian noises back-reacting on the moving mirror with self-consistency. From it we derive a nonlinear Langevin equation driven by these back-action noises from the quantum field. We then show how results from our general modeling and treatment can be linked with the models and the Langevin equations presented in the literature, starting with the popular radiation pressure Nx coupling, with N the photon number, up to the recent x3 order results. We hope this new approach and the results presented here can provide useful theoretical support for high precision QOM experimentation in the future.
Why are classical theories often sufficient to describe the physics of our world even though everything around us is entirely composed of microscopic quantum systems? The boundary between these two fundamentally dissimilar theories remains an unsolved problem in modern physics. Position measurements of small objects allow us to probe the area where the classical approximation breaks down. In quantum mechanics, Heisenbergâ s uncertainty principle dictates that any measurement of the position must be accompanied by measurement induced back-action---in this case manifested as an uncertainty in the momentum. In recent years, cavity optomechanics has become a powerful tool to perform precise position measurements and investigate their fundamental limitations. The utilization of optical micro-cavities greatly enhances the interaction between light and state-of-the-art nanomechanical oscillators. Therefore, quantum mechanical phenomena have been successfully observed in systems far beyond the microscopic world. In such a cavity optomechanical system, the fluctuations in the position of the oscillator are transduced onto the phase of the light, while fluctuations in the amplitude of the light disturb the momentum of the oscillator during the measurement. As a consequence, correlations are established between the amplitude and phase quadrature of the probe light. However, so far, observation of quantum effects has been limited exclusively to cryogenic experiments, and access to the quantum regime at room temperature has remained an elusive goal because the overwhelming amount of thermal motion masks the weak quantum effects. This thesis describes the engineering of a high-performance cavity optomechanical device and presents experimental results showing, for the first time, the broadband effects of quantum back-action at room temperature. The device strongly couples mechanical and optical modes of exceptionally high quality factors to provide a measurement sensitivity ∼104 times below the requirement to resolve the zero-point fluctuations of the mechanical oscillator. The quantum back-action is then observed through the correlations created between the probe light and the motion of the nanomechanical oscillator. A so-called â variational measurementâ , which detects the transmitted light in a homodyne detector tuned close to the amplitude quadrature, resolves the quantum noise due to these correlations at the level of 10\% of the thermal noise over more than an octave of Fourier frequencies around mechanical resonance. Moreover, building on this result, an additional experiment demonstrates the ability to achieve quantum enhanced metrology. In this case, the generated quantum correlations are used to cancel quantum noise in the measurement record, which then leads to an improved relative signal-to-noise ratio in measurements of an external force. In conclusion, the successful observation of broadband quantum behavior on a macroscopic object at room temperature is an important milestone in the field of cavity optomechanics. Specifically, this result heralds the rise of optomechanical systems as a platform for quantum physics at room temperature and shows promise for generation of ponderomotive squeezing in room-temperature interferometers.
We provide a fully quantum description of a mechanical oscillator in the presence of thermal environmental noise by means of a quantum Langevin formulation based on quantum stochastic calculus. The system dynamics is determined by symmetry requirements and equipartition at equilibrium, while the environment is described by quantum Bose fields in a suitable non-Fock representation which allows for the introduction of temperature. A generic spectral density of the environment can be described by introducing its state through a suitable P -representation. Including interaction of the mechanical oscillator with a cavity mode via radiation pressure we obtain a description of a simple optomechanical system in which, besides the Langevin equations for the system, one has the exact input–output relations for the quantum noises. The whole theory is valid at arbitrarily low temperature. This allows the exact calculation of the stationary value of the mean energy of the mechanical oscillator, as well as both homodyne and heterodyne spectra. The present analysis allows in particular to study possible cooling scenarios and to obtain the exact connection between observed spectra and fluctuation spectra of the position of the mechanical oscillator.
Detailed understanding of physical measurements is essential for devising efficient metrological strategies and measurement-feedback schemes, as well as finding fundamental limitations on measurement sensitivity. In the quantum regime, measurements modify the state of the system of interest through measurement backaction as a direct consequence of the Heisenberg principle. In cavity optomechanics and electromechanics, a plethora of strategies exist for measuring the mechanical motion using electromagnetic fields, each leading to different competition between measurement imprecision and backaction. While this range of techniques allows broad applications of optomechanical and electromechanical devices, it makes direct comparison of different measurement methods difficult. We develop a formalism for quantifying the performance of optomechanical measurements using a few relevant figures of merit. Our approach is inspired by similar characterizations in quantum optics and quantifies the main properties of quantum measurements -- the ability to distinguish different quantum states and preservation of signal in the presence of measurement noise. We demonstrate our concept on the most common optomechanical measurements -- displacement detection, coherent quantum noise cancellation, and quantum nondemolition measurements -- and perform detailed analysis of errors in optomechanical nondemolition measurements. This newly acquired knowledge allows us to propose a strategy for quantum nondemolition measurements in levitodynamics using coherent scattering. Our results complement existing knowledge of linear optomechanical interactions and open the way to new understanding of optomechanical measurements, thus allowing also novel applications of optomechanical devices in fundamental physics and quantum technologies.