Detailed understanding of physical measurements is essential for devising efficient metrological strategies and measurement-feedback schemes, as well as finding fundamental limitations on measurement sensitivity. In the quantum regime, measurements modify the state of the system of interest through measurement backaction as a direct consequence of the Heisenberg principle. In cavity optomechanics and electromechanics, a plethora of strategies exist for measuring the mechanical motion using electromagnetic fields, each leading to different competition between measurement imprecision and backaction. While this range of techniques allows broad applications of optomechanical and electromechanical devices, it makes direct comparison of different measurement methods difficult. We develop a formalism for quantifying the performance of optomechanical measurements using a few relevant figures of merit. Our approach is inspired by similar characterizations in quantum optics and quantifies the main properties of quantum measurements -- the ability to distinguish different quantum states and preservation of signal in the presence of measurement noise. We demonstrate our concept on the most common optomechanical measurements -- displacement detection, coherent quantum noise cancellation, and quantum nondemolition measurements -- and perform detailed analysis of errors in optomechanical nondemolition measurements. This newly acquired knowledge allows us to propose a strategy for quantum nondemolition measurements in levitodynamics using coherent scattering. Our results complement existing knowledge of linear optomechanical interactions and open the way to new understanding of optomechanical measurements, thus allowing also novel applications of optomechanical devices in fundamental physics and quantum technologies.
Detailed understanding of physical measurements is essential for devising efficient metrological strategies and measurement-feedback schemes, as well as finding fundamental limitations on measurement sensitivity. In the quantum regime, measurements modify the state of the system of interest through measurement backaction as a direct consequence of the Heisenberg principle. In cavity optomechanics and electromechanics, a plethora of strategies exist for measuring the mechanical motion using electromagnetic fields, each leading to different competition between measurement imprecision and backaction. While this range of techniques allows broad applications of optomechanical and electromechanical devices, it makes direct comparison of different measurement methods difficult. We develop a formalism for quantifying the performance of optomechanical measurements using a few relevant figures of merit. Our approach is inspired by similar characterizations in quantum optics and quantifies the main properties of quantum measurements -- the ability to distinguish different quantum states and preservation of signal in the presence of measurement noise. We demonstrate our concept on the most common optomechanical measurements -- displacement detection, coherent quantum noise cancellation, and quantum nondemolition measurements -- and perform detailed analysis of errors in optomechanical nondemolition measurements. This newly acquired knowledge allows us to propose a strategy for quantum nondemolition measurements in levitodynamics using coherent scattering. Our results complement existing knowledge of linear optomechanical interactions and open the way to new understanding of optomechanical measurements, thus allowing also novel applications of optomechanical devices in fundamental physics and quantum technologies.
Cavity Optomechanics, that is the study of the interaction between an optical cavity mode and a mechanical degree of freedom, has known impressive evolution over the past decade, to become a new field at the union of condensed matter physics and optics. One of the major goals of this discipline is to test and study quantum mechanics using macroscopic systems. Among the most fundamental problems the community aims to address is the question of the quantum limits in position measurement. Quantum mechanics predicts that any measurement comes along with a backaction, which perturbs the state of the measured system. Moreover, it is expected to be conjugated with the quantum noise of the measurement apparatus (called measurement noise) used to probe the system. The optimal sensitivity is reached whenever both the measurement and the backaction noise are identical, a situation which can be assimilated to the acceptance of Heisenberg's inequality for the measurement apparatus. In cavity optomechanics, the mode of an optical cavity is used as a measurement apparatus of the position of a mechanical resonator which is expected to be responsible for the backaction imprecision. However, this so-called radiation pressure quantum backaction has never been observed to date, while it remains a decisive step towards understanding quantum measurement processes. We describe in this manuscript the study of radiation pressure effects in cavity optomechanics. We introduce the optomechanical system we have developed, which consists in a cm-scale ultra high Q (~ 1 000 000) plano-convex mechanical resonator incorporated into a ultra-high finesse (~ 300 000) Fabry-Prot cavity. We present two important results we obtained with this system. First, we were able to report the first direct observation of radiation pressure in real-time, based on establishing pump-probe correlations. We were also able to demonstrate for the first time nonlinear backaction effects related to substantial improvement of position measurement sensitivity. We explain why demonstrating quantum backaction requires ultra-high stability of the optical mode. We present important changes made to the previous experimental setup, notably on the laser source, on the detection and the stabilization of the experiment. We then describe a new optomechanical detection technique providing an independent measurement of the cavity detuning. Finally, we present a proof-of-principle experiment allowing to extract quantum optomechanical correlations at room temperature.
Cavity optomechanics originated from the research of interferometric detection of gravitational waves, and later became a fast-growing area of techniques and approaches ranging from the fields of atomic, molecular, and optical physics to nano-science and condensed matter physics as well. Recently, it focused on the exploration of operating mechanical oscillators deep in the quantum regime, with an interest ranging from quantum-classical interface tests to high-precision quantum metrology. In this paper, recent theoretical work of our group in the field of quantum measurement with cavity optomechanical systems is reviewed. We explore the quantum measurement theory and its applications with several unconventional cavity optomechanical schemes working in the quantum regime. This review covers the basics of quantum noises in the cavity optomechanical setups and the resulting standard quantum limit of precision displacement and force measurement. Three novel quantum measurement proposals based on the hybrid optomechanical system are introduced. First, we describe a quantum back-action insulated weak force sensor. It is realized by forming a quantum-mechanics-free subsystem with two optomechanical oscillators of reversed effective mass. Then we introduce a role-reversed atomic optomechanical system which enables the preparation and the quantum tomography of a variety of non-classical states of atoms. In this system, the cavity field acts as a mechanical oscillator driven by the radiation pressure force from an ultracold atomic field. In the end, we recommend a multimode optomechanical transducer that can detect intensities significantly below the single-photon level via adiabatic transfer of the microwave signal to the optical frequency domain. These proposals demonstrate the possible applications of optomechanical devices in understanding of quantum-classical crossover and in achieving quantum measurement limit.
Unlike classical systems, the very act of observing quantum systems perturbs their behaviour. This introduces noise, which imposes limits on the knowledge that can be obtained through measurement. Certain measurement techniques, known generally as quantum non-demolition (QND) measurements, exist to circumvent this noise. An alternative method to evade backaction noise is to amplify the observable of interest above the noise. However, this generally leaves the system in a different state, and is therefore not considered a QND measurement. In this thesis, I examine the benefits of amplification for various kinds of measurement of mechanical harmonic oscillators which, at the micrometre and nanometre scale, comprise an emerging quantum technology. For this prototypical case, modulation of the spring constant, also known as parametric amplification, is a well-studied noiseless amplification technique. Using the theory of trajectories developed in the field of quantum optics, I show that a weak measurement combined with a detuned parametric drive achieves the same ends as strong QND measurement. Namely, it allows backaction-free observation of one quadrature of mechanical motion, and through this, quantum squeezing below the quantum zero-point motion. This equivalence is experimentally confirmed in the classical limit using an optically detected, electrically modulated cantilever. In addition, I analyse similar amplification enhanced techniques for quantum entanglement and quantum tomography. These results are applicable to research in quantum optomechanics and electromechanics, and can be translated to other kinds of quantum harmonic oscillators, such as microwave cavities.
The ability to control the motion of mechanical systems through interaction with light has opened the door to a plethora of applications in fundamental and applied physics. With experiments routinely reaching the quantum regime, the focus has now turned towards creating and exploiting interesting non-classical states of motion and entanglement in optomechanical systems. Quantumness has also shifted from being the very reason why experiments are constructed to becoming a resource for the investigation of fundamental physics and the creation of quantum technologies. Here, by focusing on opto- and electromechanical platforms we review recent progress in quantum state preparation and entanglement of mechanical systems, together with applications to signal processing and transduction, quantum sensing and topological physics, as well as small-scale thermodynamics.
An exciting scientific goal, common to many fields of research, is the development of ever-larger physical systems operating in the quantum regime. Relevant to this dissertation is the objective of preparing and observing a mechanical object in its motional quantum ground state. In order to sense the object's zero-point motion, the probe itself must have quantum-limited sensitivity. Cavity optomechanics, the interactions between light and a mechanical object inside an optical cavity, provides an elegant means to achieve the quantum regime. In this dissertation, I provide context to the successful cavity-based optical detection of the quantum-ground-state motion of atoms-based mechanical elements; mechanical elements, consisting of the collective center-of-mass (CM) motion of ultracold atomic ensembles and prepared inside a high-finesse Fabry-P'erot cavity, were dispersively probed with an average intracavity photon number as small as 0.1. I first show that cavity optomechanics emerges from the theory of cavity quantum electrodynamics when one takes into account the CM motion of one or many atoms within the cavity, and provide a simple theoretical framework to model optomechanical interactions. I then outline details regarding the apparatus and the experimental methods employed, highlighting certain fundamental aspects of optical detection along the way. Finally, I describe background information, both theoretical and experimental, to two published results on quantum cavity optomechanics that form the backbone of this dissertation. The first publication shows the observation of zero-point collective motion of several thousand atoms and quantum-limited measurement backaction on that observed motion. The second publication demonstrates that an array of near-ground-state collective atomic oscillators can be simultaneously prepared and probed, and that the motional state of one oscillator can be selectively addressed while preserving the near-zero-point motion of neighboring oscillators.
Why are classical theories often sufficient to describe the physics of our world even though everything around us is entirely composed of microscopic quantum systems? The boundary between these two fundamentally dissimilar theories remains an unsolved problem in modern physics. Position measurements of small objects allow us to probe the area where the classical approximation breaks down. In quantum mechanics, Heisenbergâ s uncertainty principle dictates that any measurement of the position must be accompanied by measurement induced back-action---in this case manifested as an uncertainty in the momentum. In recent years, cavity optomechanics has become a powerful tool to perform precise position measurements and investigate their fundamental limitations. The utilization of optical micro-cavities greatly enhances the interaction between light and state-of-the-art nanomechanical oscillators. Therefore, quantum mechanical phenomena have been successfully observed in systems far beyond the microscopic world. In such a cavity optomechanical system, the fluctuations in the position of the oscillator are transduced onto the phase of the light, while fluctuations in the amplitude of the light disturb the momentum of the oscillator during the measurement. As a consequence, correlations are established between the amplitude and phase quadrature of the probe light. However, so far, observation of quantum effects has been limited exclusively to cryogenic experiments, and access to the quantum regime at room temperature has remained an elusive goal because the overwhelming amount of thermal motion masks the weak quantum effects. This thesis describes the engineering of a high-performance cavity optomechanical device and presents experimental results showing, for the first time, the broadband effects of quantum back-action at room temperature. The device strongly couples mechanical and optical modes of exceptionally high quality factors to provide a measurement sensitivity ∼104 times below the requirement to resolve the zero-point fluctuations of the mechanical oscillator. The quantum back-action is then observed through the correlations created between the probe light and the motion of the nanomechanical oscillator. A so-called â variational measurementâ , which detects the transmitted light in a homodyne detector tuned close to the amplitude quadrature, resolves the quantum noise due to these correlations at the level of 10\% of the thermal noise over more than an octave of Fourier frequencies around mechanical resonance. Moreover, building on this result, an additional experiment demonstrates the ability to achieve quantum enhanced metrology. In this case, the generated quantum correlations are used to cancel quantum noise in the measurement record, which then leads to an improved relative signal-to-noise ratio in measurements of an external force. In conclusion, the successful observation of broadband quantum behavior on a macroscopic object at room temperature is an important milestone in the field of cavity optomechanics. Specifically, this result heralds the rise of optomechanical systems as a platform for quantum physics at room temperature and shows promise for generation of ponderomotive squeezing in room-temperature interferometers.