We provide a fully quantum description of a mechanical oscillator in the presence of thermal environmental noise by means of a quantum Langevin formulation based on quantum stochastic calculus. The system dynamics is determined by symmetry requirements and equipartition at equilibrium, while the environment is described by quantum Bose fields in a suitable non-Fock representation which allows for the introduction of temperature. A generic spectral density of the environment can be described by introducing its state through a suitable P -representation. Including interaction of the mechanical oscillator with a cavity mode via radiation pressure we obtain a description of a simple optomechanical system in which, besides the Langevin equations for the system, one has the exact input–output relations for the quantum noises. The whole theory is valid at arbitrarily low temperature. This allows the exact calculation of the stationary value of the mean energy of the mechanical oscillator, as well as both homodyne and heterodyne spectra. The present analysis allows in particular to study possible cooling scenarios and to obtain the exact connection between observed spectra and fluctuation spectra of the position of the mechanical oscillator.
We provide a fully quantum description of a mechanical oscillator in the presence of thermal environmental noise by means of a quantum Langevin formulation based on quantum stochastic calculus. The system dynamics is determined by symmetry requirements and equipartition at equilibrium, while the environment is described by quantum Bose fields in a suitable non-Fock representation which allows for the introduction of temperature. A generic spectral density of the environment can be described by introducing its state through a suitable P -representation. Including interaction of the mechanical oscillator with a cavity mode via radiation pressure we obtain a description of a simple optomechanical system in which, besides the Langevin equations for the system, one has the exact input–output relations for the quantum noises. The whole theory is valid at arbitrarily low temperature. This allows the exact calculation of the stationary value of the mean energy of the mechanical oscillator, as well as both homodyne and heterodyne spectra. The present analysis allows in particular to study possible cooling scenarios and to obtain the exact connection between observed spectra and fluctuation spectra of the position of the mechanical oscillator.
The description of the optomechanical systems is commonly based on the quantum Langevin equation formalism. This framework is introduced phenomenologically or based on a model Hamiltonian. However, once dealing with the optomechanical Fabry-Perot cavity or the modified Michelson-Sagnac interferometer with a semitransparent mechanically active membrane inside, a model-free consideration is also possible by using an alternative approach. Such an approach, which is based on the classical wave equations, is popular in the gravitational-wave community where it is termed as input-output relations approach. In this work, using the aforementioned approach, we derived the equations for the ladder operator of the intracavity field, stochastic back-action force, and the relation between the fields at the input mirror. Then we simplified the obtained results down to the range of applicability of the Langevin equation formalism and compared these with the corresponding predictions of the latter formalism. This enabled us to critically assess the validity of the Langevin equation formalism and rectify its range of applicability to find that the latter is more stringent than that intuitively expected. In the case where the dissipative optomechanical coupling is involved we identified appreciable problems with this formalism. It was found that, disregarding the fact that decay rate of the optomechanical Fabry-Perot cavity depends on its length, no dissipative optomechanical coupling is generated. This is in contrast with the prediction of the standard Langevin-equation based treatment. It was found that the Langevin equation formalism misses a phase factor at the input field; this factor turns out to be important for the situation involving the dissipative optomechanical coupling.
We consider an oscillating micromirror replacing one of the two fixed mirrors of a Mach-Zehnder interferometer. In this ideal optical set-up the quantum oscillator is subjected to the radiation pressure interaction of traveling light waves, no cavity is involved. The aim of this configuration is to show that squeezed light can be generated by pure scattering on a quantum system, without involving a cavity. The squeezing can be detected at the output ports of the interferometer either by direct detection or by measuring the spectrum of the difference current. We use the quantum-stochastic Schr\"odinger equation (Hudson-Parthasarathy equation) to model the global evolution. Indeed, it can describe the scattering of photons and the resulting radiation pressure interaction on the quantum oscillator. Moreover, it allows us to consider also the interaction with a thermal bath, so that it can describe also the damping of the harmonic oscillator and non-Markovian thermal effects. In this way we have a unitary dynamics giving the evolution of oscillator and fields. The Bose fields of quantum stochastic calculus and the related generalized Weyl operators allow us to describe the whole optical circuit. By working in the Heisenberg picture, the quantum Langevin equations for position and momentum and the output fields arise, which are used to describe the monitoring in continuous time of the light at the output ports. In the case of strong laser and weak radiation pressure interaction highly nonclassical light is produced, and this can be revealed either by direct detection (a negative Mandel Q-parameter is found) or by the intensity spectrum of the difference current of two photodetector; in the second case a nearly complete cancellation of the shot noise can be reached. In this last case it appears that the Mach-Zehnder configuration together with the detection of the difference current corresponds to an homodyne detection scheme, so that we can say that the apparatus is measuring the ``spectrum of squeezing.''
It is shown that the effective Hamiltonian representation, as it is formulated in author’s papers, serves as a basis for distinguishing, in a broadband environment of an open quantum system, independent noise sources that determine, in terms of the stationary quantum Wiener and Poisson processes in the Markov approximation, the effective Hamiltonian and the equation for the evolution operator of the open system and its environment. General stochastic differential equations of generalized Langevin (non-Wiener) type for the evolution operator and the kinetic equation for the density matrix of an open system are obtained, which allow one to analyze the dynamics of a wide class of localized open systems in the Markov approximation. The main distinctive features of the dynamics of open quantum systems described in this way are the stabilization of excited states with respect to collective processes and an additional frequency shift of the spectrum of the open system. As an illustration of the general approach developed, the photon dynamics in a single-mode cavity without losses on the mirrors is considered, which contains identical intracavity atoms coupled to the external vacuum electromagnetic field. For some atomic densities, the photons of the cavity mode are “locked” inside the cavity, thus exhibiting a new phenomenon of radiation trapping and non-Wiener dynamics.
In this chapter we introduce the basic concept of a quantum harmonic oscillator, and how such oscillators couple to their environment. Our purpose is not to exhaustively cover all aspects of such systems, but rather to provide the foundation material required to treat the quantum mechanics of mechanical resonators and optical cavities – and their interactions – in later chapters. The quantum fluctuation-dissipation theorem is derived relating the power spectral density of environmental forcing of an oscillator to the rate of energy decay from the oscillator into the environment. This is in direct analogy to the familiar fluctuation-dissipation theorem in classical physics. However, in contrast to the classical case, the noncommutation of position and momentum introduces an asymmetry between the positive and negative frequency components of the power spectrum. This provides a natural definition for the effective temperature of the oscillator. The quantum Langevin approach is introduced as a method to model the open dynamics of quantum systems, both with and without recourse to the rotating wave approximation.
Optomechanical systems are promising platforms for controlled light-matter interactions.They are capable of providing several fundamental and practical novel features when the mechanical oscillator is cooled down to nearly reach its ground state.In this framework, measuring the effective temperature of the oscillator is perhaps the most relevant step in the characterization of those systems.In conventional schemes, the cavity is driven strongly, and the overall system is well-described by a linear (Gaussian preserving) Hamiltonian.Here, we depart from this regime by considering an undriven optomechanical system via non-Gaussian radiation-pressure interaction.To measure the temperature of the mechanical oscillator, initially in a thermal state, we use light as a probe to coherently interact with it and create an entangled state.We show that the optical probe gets a nonlinear phase, resulting from the non-Gaussian interaction, and undergoes an incoherent phase diffusion process.To efficiently infer the temperature from the entangled light-matter state, we propose using a nonlinear Kerr medium before a homodyne detector.Remarkably, placing the Kerr medium enhances the precision to nearly saturate the ultimate quantum bound given by the quantum Fisher information.Furthermore, it also simplifies the thermometry procedure as it makes the choice of the homodyne local phase independent of the temperature.
It is known that the origin of the deviations from standard thermodynamics proceed from the strong coupling to the bath. Here, it is shown that these deviations are related to the power spectrum of the bath. Specifically, it is shown that the system thermal-equilibrium-state cannot be characterized by the canonical Boltzmann's distribution in quantum mechanics. This is because the uncertainty principle imposed a lower bound of the dispersion of the total energy of the system that is dominated by the spectral density of the bath. However, in the classical case, for a wide class of systems that interact via central forces with pairwise-self-interacting environment, the system thermal equilibrium state is exactly characterized by the canonical Boltzmann distribution. As a consequence of this analysis and taking into account all energy scales in the system and reservoir interaction, an effective coupling to the environment is introduced. Sample computations in different regimes predicted by this effective coupling are shown. Specifically, in the strong coupling effective regime, the system exhibits deviations from standard thermodynamics and in the weak coupling effective regime, quantum features such as stationary entanglement are possible at high temperatures. Moreover, it is known that the spectrum of thermal baths depends on the non-Markovian character. Hence, non-Markovian interactions have a important role in the thermal equilibrium state of physical systems. For example, in quantum optomechanics is looked up to cool the mechanical system through an auxiliary system which generally is a cavity. This cooling process takes into account the non-Markovian interaction and as it is shown here, it is more effective than if we use only the Markovian approximation in the equation of motion for the different modes.