Tile codes are a family of planar quantum low-density parity-check (qLDPC) codes with weight-6 stabilizers and open boundary conditions, offering an encoding efficiency $kd^2/n$ of up to four times that of the surface code. In this work, we develop an exhaustive search algorithm for finding SWAP-based routing schemes that implement syndrome extraction for four tile-code families using only nearest-neighbor interactions on a two-dimensional square lattice, matching the connectivity of the surface code. Using explicitly constructed routed syndrome-extraction circuits decoded with BP+OSD, we estimate the circuit-level thresholds of these code families. For the SI1000 noise model, the threshold without such a connectivity constraint is obtained in a range 0.23%-0.31%, while it decreases to 0.11%-0.13% with routing, representing a reduction factor of around two to three. Despite this threshold penalty, our resource-footprint analysis shows that routed tile codes require fewer physical qubits per logical qubit than the surface code at sufficiently low physical error rates: Under the SI1000 noise model, we find a crossover near $p^*\approx 0.08\%$, below which routed tile codes become more qubit-efficient, with an advantage that grows monotonically as the physical error rate decreases.
Tile codes are a family of planar quantum low-density parity-check (qLDPC) codes with weight-6 stabilizers and open boundary conditions, offering an encoding efficiency kd2/n of up to four times that of the surface code. In this work, we develop an exhaustive search algorithm for finding SWAP-based routing schemes that implement syndrome extraction for four tile-code families using only nearest-neighbor interactions on a two-dimensional square lattice, matching the connectivity of the surface code. Using explicitly constructed routed syndrome-extraction circuits decoded with BP+OSD, we estimate the circuit-level thresholds of these code families. For the SI1000 noise model, the threshold without such a connectivity constraint is obtained in a range 0.23%-0.31%, while it decreases to 0.11%-0.13% with routing, representing a reduction factor of around two to three. Despite this threshold penalty, our resource-footprint analysis shows that routed tile codes require fewer physical qubits per logical qubit than the surface code at sufficiently low physical error rates: Under the SI1000 noise model, we find a crossover near p∗≈0.08%, below which routed tile codes become more qubit-efficient, with an advantage that grows monotonically as the physical error rate decreases.
High-performance quantum low-density parity-check codes promise substantial reductions in the overhead of fault-tolerant quantum computation, but most constructions require long-range connectivity or qubit shuttling, both of which are difficult to realise in superconducting architectures. Here we introduce a family of quantum low-density parity-check codes that, for the first time, combines planar open-boundary layouts, finite-size advantages over surface codes, and syndrome extraction using only nearest-neighbour gates on a planar grid of qubits with either square or hexagonal connectivity. The resulting circuits achieve optimal constant-depth stabiliser measurement, independent of code size, and naturally remove leakage from the system by exchanging the roles of check and data qubits at each syndrome extraction round. We find finite-size instances such as a [[323,14,15]] code, whose code-efficiency ratio is nearly an order of magnitude larger than that of rotated surface-code patches. At around 40 circuit qubits per logical qubit, the best directional tile-code layouts reduce the per-logical per-round logical error rate by a factor of 100 relative to rotated surface-code memories. These results show that the advantages of quantum low-density parity-check codes can survive compilation into strictly planar nearest-neighbour circuits, bringing low-overhead fault-tolerant memories closer to near-term hardware.
The surface code is a promising route towards large-scale quantum computing, requiring only nearest-neighbour gates amenable to superconducting hardware. However, surface codes incur large qubit overheads. Novel quantum low-density parity check (qLDPC) codes promise to reduce overheads but require long-range connections that are difficult to achieve on superconducting platforms. Here, we introduce "Vine Codes" - qLDPC codes that are implementable on a planar square grid through nearest-neighbour, two-qubit gates native to superconducting platforms (iSWAP and CZ). Our approach generalises "Directional Codes" recently introduced by Gehér et. al. (2025) which are constrained to a torus. In contrast, vine codes have open boundary conditions constructed with the aid of routing qubits. We perform extensive numeric searches and find promising candidate vine codes, e.g. [[121,4,6]], [[221,6,7]], and [[234,9,6]] codes. We verify the circuit distances and show that data and measure qubits required can be reduced by up to ~28% relative to the surface code at a circuit distance of 7. Even including routing qubits, vine codes require fewer total qubits than the surface code (e.g. ~18% reduction at circuit distance 10) and benefits are expected to increase at higher distances. We perform circuit-level noise simulations to demonstrate that under a realistic noise model and at a near-term noise rate of 10−3, vine codes can perform better than the surface code while using fewer qubits. We give an exhaustive list of all unique vine codes up to stabiliser-weight 9. We additionally introduce "Flip-Vine Codes" which possess single-qubit transversal Clifford gates useful for fault-tolerant logic and magic state cultivation. We furthermore construct examples of generalised open boundaries for vine codes that go beyond the familiar X/Z boundaries of the surface and tile codes.
We present a fault-tolerant quantum-memory architecture that concatenates four distance-t rotated surface-code patches with the [[4,2,2]] outer code, encoding two logical qubits at code distance d = 2t in a physical footprint of N < 2(2t+1)^2 qubits on a square lattice with nearest-neighbor connectivity. The outer-code stabilizer generators XXXX and ZZZZ, each of physical weight 4t, are measured in situ via verified Greenberger-Horne-Zeilinger (GHZ) ancillae distributed through narrow corridors between adjacent patches, without lattice surgery or long-range gates. The outer-code gadgets introduce hyperedge fault mechanisms, but by design each decomposes into graphlike components, so the complete syndrome is decoded by a single minimum-weight-perfect-matching pass. Circuit-level simulations show logical error rates that scale as p^t, consistent with distance-2t protection. Finally, we implement the construction experimentally on a 105-qubit Willow superconducting processor in both the ZZ and XX memory bases. With the correlated-matching decoder, increasing the code distance from d = 4 to d = 6 reduces the block logical error rate by a factor of 1.52. The construction thus provides a near-term testbed for concatenated architectures beyond the standard surface code.
Although high-threshold and low-overhead quantum low-density parity-check (qLDPC) codes, such as bivariate bicycle (BB) codes, can reduce the physical-qubit cost by an order of magnitude compared to the Kitaev toric code, their torus layout remains difficult for physical implementation. In this work, we introduce the first systematic procedure to convert BB codes into fully planar, open-boundary qLDPC codes, preserving their performance. We present planar code families with logical dimensions 6 ≤ k ≤ 13 , e.g., ⟦ 78 , 6 , 6 ⟧ , ⟦ 107 , 7 , 7 ⟧ , ⟦ 268 , 8 , 12 ⟧ , ⟦ 405 , 9 , 15 ⟧ , ⟦ 348 , 10 , 13 ⟧ , ⟦ 450 , 11 , 15 ⟧ , ⟦ 386 , 12 , 12 ⟧ , and ⟦ 362 , 13 , 11 ⟧ , all with geometrically local weight-6 stabilizers. Allowing weight-8 stabilizers produces a ⟦ 282 , 12 , 14 ⟧ code, exhibiting an efficiency metric ( k d 2 / n ) an order of magnitude higher than the surface code. The construction combines boundary-anyon condensation with the “lattice-grafting” optimization, yielding high-performance qLDPC codes natively compatible with planar hardware architectures. It also uncovers Sierpinski-type fractal logical operators the distance of which scales with the fractal area on finite lattices. These planar qLDPC codes provide an implementable route to resource-efficient, high-threshold fault tolerance and a flexible framework for future code design on realistic two-dimensional hardware.
Realizing practical quantum computers requires quantum error correction, but the most widely implemented approach, the planar surface code, demands a substantial physical qubit overhead. Here, we demonstrate that partitioning quantum processors into manageable, flat modules with non-local inter-module connections provides a natural solution. By wiring sparse, static boundary connections between Euclidean planar modules, we construct modular hyperbolic surface and color codes, based on new families of semi-hyperbolic codes. Using modular syndrome extraction circuits and efficient neural network and matching decoders, our circuit-level simulations show that this modular memory design can reduce the physical qubit overhead by tenfold or more compared to the surface code, even under elevated inter-module seam error rates. Projecting to larger system sizes, we find modular codes with encoding rate k/n=1/16 and distance d≥22, exceeding both the rate and distance of the [[288,12,18]] two-gross bivariate bicycle code while using mostly nearest-neighbor gates within planar modules, and implying an over 30× overhead reduction relative to surface codes. We develop fault-tolerant walking circuits for implementing logic via code automorphisms, which we co-design with low-weight, highly symmetrical logical bases and a modular extractor system that is ≈4.5× smaller than the code itself. Combining these methods, our modular memory can be used as dense storage in a universal fault-tolerant architecture, unlocking the efficiency of high-rate codes without sacrificing the fabrication advantages of planar modules.
Quantum low-density parity-check (qLDPC) codes are promising candidates for realizing large-scale fault-tolerant quantum computing. Although many codes with favorable theoretical parameters have been developed, their practical adoption must take hardware implementability into account. For mainstream quantum platforms such as superconductors and neutral atoms, the connectivity, the length of non-local couplings, and the complexity of wiring or atom rearrangement are key factors that dictate the difficulty of hardware realization. Here, we propose a new family of qLDPC codes, termed routing codes. Within this family, we find explicit instances whose encoding rates are competitive to those of bivariate bicycle (BB) codes, while systematically reducing qubit connectivity, shortening the length of non-local couplings, and, crucially, making all non-local couplings mutually parallel. This parallelism translates into quantifiable benefits, substantially reducing wiring crossings in superconducting multi-layer architectures and simplifying the scheduling of atom movement in neutral-atom arrays. The weight-7 routing codes maintain a high threshold of 0.7\% and reduce the physical qubit overhead by approximately a factor of 8, compared to surface codes achieving a same logical error rate. Further increasing the weight to 11 yields a [[200, 24, 14]] and [[200, 16, 17]] codes with an encoding rate over 23 times that of the surface code, at the cost of a higher logical error rate. These results establish routing codes as a hardware-centric qLDPC family that bridges the gap between theoretical optimality and near-term physical feasibility.