Dynamic quantum circuits integrate mid-circuit measurements and feed-forward operations to enable real-time classical processing and conditional quantum logic. These capabilities are central to key quantum protocols such as quantum error correction, and have recently demonstrated significant potential for reducing quantum resources, including circuit depth and gate count, across a range of applications. However, executing dynamic circuits on real quantum hardware introduces a critical trade-off: while resource requirements decrease, circuit fidelity degrades due to high error rates of mid-circuit measurements, as well as the decoherence errors accumulated during the extended idle periods introduced by both mid-circuit measurements and feed-forward operations. In this paper, we systematically investigate the impact of standard error mitigation techniques on dynamic circuit applications pertaining to Hamiltonian simulation and ground state estimation of physically relevant systems like the Heisenberg model. We explore dynamical decoupling (DD) as a strategy to suppress decoherence and crosstalk errors during idle windows introduced by mid-circuit measurements and feed-forward delays, and also examine error mitigation via zero-noise extrapolation (ZNE). Through experiments conducted on IBM quantum hardware, we benchmark effective combinations of these strategies that maximize the practical benefits of dynamic quantum circuits in these applications. We demonstrate that a combination of DD and ZNE is effective in mitigating the errors introduced during mid-circuit measurements and feed-forward operations, as well as the errors arising from faulty measurements. This approach yields a energy gap improvement of at least 60% in ground state estimation and reduces observed error of time-evolved states by up to 99% for the Ising model and up to 20% for the Heisenberg model.
Dynamic quantum circuits integrate mid-circuit measurements and feed-forward operations to enable real-time classical processing and conditional quantum logic. These capabilities are central to key quantum protocols such as quantum error correction, and have recently demonstrated significant potential for reducing quantum resources, including circuit depth and gate count, across a range of applications. However, executing dynamic circuits on real quantum hardware introduces a critical trade-off: while resource requirements decrease, circuit fidelity degrades due to high error rates of mid-circuit measurements, as well as the decoherence errors accumulated during the extended idle periods introduced by both mid-circuit measurements and feed-forward operations. In this paper, we systematically investigate the impact of standard error mitigation techniques on dynamic circuit applications pertaining to Hamiltonian simulation and ground state estimation of physically relevant systems like the Heisenberg model. We explore dynamical decoupling (DD) as a strategy to suppress decoherence and crosstalk errors during idle windows introduced by mid-circuit measurements and feed-forward delays, and also examine error mitigation via zero-noise extrapolation (ZNE). Through experiments conducted on IBM quantum hardware, we benchmark effective combinations of these strategies that maximize the practical benefits of dynamic quantum circuits in these applications. We demonstrate that a combination of DD and ZNE is effective in mitigating the errors introduced during mid-circuit measurements and feed-forward operations, as well as the errors arising from faulty measurements. This approach yields a energy gap improvement of at least 60% in ground state estimation and reduces observed error of time-evolved states by up to 99% for the Ising model and up to 20% for the Heisenberg model.
In quantum computing, noisy intermediate-scale quantum (NISQ) devices offer unprecedented computational capabilities but are vulnerable to errors, notably measurement inaccuracies that impact computation accuracy. This study explores the efficacy of error mitigation techniques in improving quantum circuit performance on NISQ devices. Techniques such as dynamic decoupling (DD), twirled readout error extraction (T-REx) and zero-noise extrapolation (ZNE) are examined through extensive experimentation on an ideal simulator, IBM Kyoto, and IBM Osaka quantum computers. Results reveal significant performance discrepancies across scenarios, with error mitigation techniques notably enhancing both estimator result and variance values, aligning more closely with ideal simulator outcomes. The comparison results with ideal simulator (having expected result value 0.8284) shows that T-Rex has improved results on IBM Kyoto and enhanced average expected result value from 0.09 to 0.35. Similarly, DD has improved average expected result values from 0.2492 to 0.3788 on IBM Osaka. These findings underscore the critical role of error mitigation in bolstering quantum computation reliability. The results suggest that selection of mitigation technique depends upon quantum circuit and its depth, type of hardware and operations to be performed.
Dynamic quantum circuits integrate unitary evolution with mid-circuit measurement and feedforward, enabling conditional operations essential for efficient quantum algorithms and foundational for fault-tolerant quantum computation. However, such operations introduce measurement-induced errors and control constraints that are not addressed by conventional error-suppression techniques. Here, we introduce an empirical learning framework that optimizes dynamical decoupling (DD) sequences for dynamic circuits at the level of circuit subintervals and qubit subregisters. Applying empirically learned DD sequences, we achieve a three-fold reduction in average dynamic circuit error rates as measured via randomized benchmarking. We apply the learned strategies to the dynamic circuit implementation of the quantum Fourier transform with measurement (QFT+M), demonstrating nontrivial process fidelity on connected chains of up to 20 qubits. Applying the resulting enhancement, we perform a high signal-to-noise QFT immediately following the preparation of a 10-qubit entangled state. Our results demonstrate that empirically optimized DD systematically outperforms theoretically derived sequences for dynamic circuits, establishing it as an efficient approach for error suppression in dynamic quantum circuits, with direct relevance to applications requiring measurement and feedback such as quantum error correction.
Noisy Intermediate-Scale Quantum (NISQ) computers suffer from gate errors, decoherence, and readout noise that can severely impact even small quantum circuits. In this work, the application of error mitigation techniques was investigated to a simple two-bit quantum comparator circuit executed on real IBM Quantum hardware. The 2-bit comparator is a basic quantum logic circuit that compares two 2-qubit binary numbers and outputs whether the first number is greater than, equal to, or less than the second. This comparator was implemented using Qiskit and studied its performance under realistic noise. This study on error mitigation concentrates on dynamical decoupling (DD), which is a coherent error suppression strategy that cancels coherent errors by inserting echo pulse sequences during idle time periods. The results demonstrate that dynamical decoupling improves accuracy for the comparator circuit - accurate outcomes are closer to the ideal outcome in the absence of noise. These results show that dynamical decoupling yields notable accuracy improvements for the comparator circuit - bringing measured outcomes closer to the ideal noiseless results. A performance analysis (including a bar-chart of accuracy after mitigation vs. before mitigation simulation) is presented to quantify these improvements. Finally, the implications of applying error mitigation in small quantum circuits and its relevance for near-term quantum computing are also discussed, where such techniques can enhance the reliability of quantum computations in the absence of full quantum error correction.
Quantum error mitigation (QEM) for dynamic circuits, i.e., those incorporating mid-circuit measurements and feedforward, is important for two key reasons. First, quantum error correction (QEC) circuits are instances of dynamic circuits, and therefore a dynamic circuit-compatible QEM can extend circuit depth and address errors that QEC struggles with. Second, recent studies show that dynamic circuits can significantly outperform purely unitary ones. However, mid-circuit measurement errors remain a major bottleneck. Current solutions rely on readout noise characterization that is vulnerable to temporal noise drifts. To the best of our knowledge, no readout mitigation schemes are resilient to temporal noise drifts. By introducing parity-based noise amplification in repeated measurements, we derive and experimentally demonstrate a drift-resilient protocol for addressing preparation, mid-circuit, and terminating measurement errors without requiring calibration or characterization. Drift resilience increases the longest possible execution time (in terms of shots) and enables flexibility by combining data from non-consecutive times. For platforms such as trapped ions, where the measurements are highly disruptive, we provide an alternative reset-based mitigation scheme. We demonstrate our methods experimentally on IBMQ and Quantinuum hardware. Combined with the Layered-KIK gate error mitigation protocol, the presented readout mitigation approach enables "End-to-end" mitigation for dynamic circuits, that can improve the outcomes of QEC experiments, and that covers the widest range of errors to the best of our knowledge. Other applications of the presented methods include a faster alternative to gate-set tomography and diagnostics of defective qubits during the execution of the target algorithm.
We present a simple, malleable and low-overhead approach for improving generic biased quantum error mitigation (QEM) methods, achieving up to 15% fidelity improvements over standard QEM on 100-qubit circuits with up to 2000 entangling gates. We do so by constructing verifiable benchmark circuits which mirror the application circuit's native-gate structure and thus noise profile. These circuits can be used to benchmark and mitigate the bias of the underlying error mitigation method, requiring only the application circuit and hardware native gate set. We present two methods for generating benchmark circuits; one is agnostic to the target hardware at the expense of a small overhead of single-qubit gates, while the other is specific to the IBM superconducting hardware and has no gate overhead. As a corollary, we introduce benchmarked-noise zero-noise extrapolation (bnZNE) as a simple adaptation of zero-noise extrapolation (ZNE), one of the most popular error mitigation methods. We consider as an example the bias-mitigated ZNE and bnZNE of Trotterized Hamiltonian simulations, observing that our approaches outperform standard ZNE using both small-scale classical simulations and 100-qubit utility-scale experiments on the IBM superconducting hardware. We consider the measurement of both single-site observables as well as two-site correlations along a one-dimensional qubit chain. We also provide a software package for implementing the error mitigation techniques used in this research.
Zero-noise extrapolation (ZNE) is an established quantum error mitigation technique that infers noise-free expectation values by scaling circuit noise and extrapolating to the zero-noise limit. Standard ZNE formulations implicitly assume memoryless Markovian gate noise, where error rates scale linearly with circuit duration. In physical solid-state quantum processors dominated by colored 1/fα environmental dephasing, this fundamental assumption fails: non-Markovian noise induces superlinear coherence decay χ(t)∝t1+α, causing standard polynomial extrapolation to diverge. In this work, we demonstrate how inserting dynamical decoupling (DD) sequences into idle circuit intervals spectrally filters low-frequency noise components, linearizing the effective decay profile into a Markovian regime χeff(t)∝t. We benchmark this combined DD–ZNE framework by reconstructing the order parameter across the quantum phase transition of a 1D Transverse-Field Ising Model (TFIM). Our results demonstrate that while standalone ZNE fails under non-Markovian dephasing, the combined DD–ZNE approach eliminates extrapolation divergence and reliably recovers ideal quantum observables. Key Highlights: Theoretical Breakdown: Analytical derivation showing why polynomial ZNE diverges under 1/fα dephasing environments due to superlinear temporal scaling. Filter Function Engineering: Demonstration of spectator-qubit XY-4 pulse insertion as a high-pass spectral filter that suppresses low-frequency noise and restores linear decay dynamics. Phase Transition Benchmark: Validation on a 4-qubit 1D TFIM order parameter (⟨σz(0)σz(1)⟩) across g∈[0.1,2.0], demonstrating a >69% error reduction over unmitigated circuits and preventing non-physical polynomial divergence.