Dynamic quantum circuits with mid-circuit measurements (MCMs) and feed-forward operations play a crucial role in various applications, such as quantum error correction and quantum algorithms. With advancements in quantum hardware enabling the implementation of MCM and feed-forward loops, the use of dynamic circuits has become increasingly prevalent. There is a significant need for a benchmarking framework specially designed for dynamic circuits to capture their unique properties, as current benchmarking tools are designed primarily for unitary circuits and cannot be trivially extended to dynamic circuits. We propose dynamarq, a scalable and hardware-agnostic benchmarking framework for dynamic circuits. We collect a set of dynamic circuit benchmarks spanning various applications and propose a broad set of circuit features to characterize the structure of these dynamic circuits. We run them on two IBM quantum processors and the Quantinuum Helios-1E emulator, and propose scalable, application-dependent fidelity scores for each benchmark based on hardware execution results. We perform statistical modeling to identify correlations between circuit features and fidelity scores, and demonstrate highly accurate fidelity prediction using our model. Our model parameters are also transferable across hardware backends and calibration cycles. Our framework facilitates the understanding of dynamic circuit structures and provides insights for designing and optimizing dynamic circuits to achieve high execution fidelity on quantum hardware.
Comments
To appear in 59th IEEE/ACM International Symposium on Microarchitecture
Dynamic quantum circuits with mid-circuit measurements (MCMs) and feed-forward operations play a crucial role in various applications, such as quantum error correction and quantum algorithms. With advancements in quantum hardware enabling the implementation of MCM and feed-forward loops, the use of dynamic circuits has become increasingly prevalent. There is a significant need for a benchmarking framework specially designed for dynamic circuits to capture their unique properties, as current benchmarking tools are designed primarily for unitary circuits and cannot be trivially extended to dynamic circuits. We propose dynamarq, a scalable and hardware-agnostic benchmarking framework for dynamic circuits. We collect a set of dynamic circuit benchmarks spanning various applications and propose a broad set of circuit features to characterize the structure of these dynamic circuits. We run them on two IBM quantum processors and the Quantinuum Helios-1E emulator, and propose scalable, application-dependent fidelity scores for each benchmark based on hardware execution results. We perform statistical modeling to identify correlations between circuit features and fidelity scores, and demonstrate highly accurate fidelity prediction using our model. Our model parameters are also transferable across hardware backends and calibration cycles. Our framework facilitates the understanding of dynamic circuit structures and provides insights for designing and optimizing dynamic circuits to achieve high execution fidelity on quantum hardware.
Dynamic quantum circuits integrate mid-circuit measurements and feed-forward operations to enable real-time classical processing and conditional quantum logic. These capabilities are central to key quantum protocols such as quantum error correction, and have recently demonstrated significant potential for reducing quantum resources, including circuit depth and gate count, across a range of applications. However, executing dynamic circuits on real quantum hardware introduces a critical trade-off: while resource requirements decrease, circuit fidelity degrades due to high error rates of mid-circuit measurements, as well as the decoherence errors accumulated during the extended idle periods introduced by both mid-circuit measurements and feed-forward operations. In this paper, we systematically investigate the impact of standard error mitigation techniques on dynamic circuit applications pertaining to Hamiltonian simulation and ground state estimation of physically relevant systems like the Heisenberg model. We explore dynamical decoupling (DD) as a strategy to suppress decoherence and crosstalk errors during idle windows introduced by mid-circuit measurements and feed-forward delays, and also examine error mitigation via zero-noise extrapolation (ZNE). Through experiments conducted on IBM quantum hardware, we benchmark effective combinations of these strategies that maximize the practical benefits of dynamic quantum circuits in these applications. We demonstrate that a combination of DD and ZNE is effective in mitigating the errors introduced during mid-circuit measurements and feed-forward operations, as well as the errors arising from faulty measurements. This approach yields a energy gap improvement of at least 60% in ground state estimation and reduces observed error of time-evolved states by up to 99% for the Ising model and up to 20% for the Heisenberg model.
Dynamic quantum circuits incorporate mid-circuit measurements (MCMs) and feed-forward operations are crucial for manipulating quantum information. They have been broadly used in quantum error correction and quantum teleportation. Recently, they are utilized to prepare certain states and long-range entangling gates as well as reduce resource overhead in quantum algorithms. In this paper, we present AC/DC, a novel A utomated C ompilation framework for generating D ynamic quantum C ircuits that prepare any unitary operators or states, leveraging numerical optimization-based circuit synthesis methods. The first contribution is introducing optimization objective functions incorporating MCMs and feed-forward operations. The second contribution is embedding these into a popular open-source quantum circuit synthesis framework. We demonstrate generating dynamic circuits for long-range entangling gates, circuit optimization, lattice simulations, and state preparation, with validation through simulation and quantum hardware. Furthermore, we perform a noise analysis to assess the impact of MCM and gate errors, identifying scenarios where dynamic circuits provide significant benefits. The dynamic circuits generated by our framework show substantial improvements in reducing circuit depth and, in some cases, the number of gates. To our knowledge, this is the first practical procedure to generate dynamic quantum circuits, paving the way for enhanced circuit generation and optimization methods for near-term quantum computers.
High-fidelity mid-circuit measurements, which read out the state of specific qubits in a multiqubit processor without destroying them or disrupting their neighbors, are a critical component for useful quantum computing. They enable fault-tolerant quantum error correction, dynamic circuits, and other paths to solving classically intractable problems. But there are few methods to assess their performance comprehensively. In this work, we address this gap by introducing the first randomized benchmarking protocol that measures the rate at which mid-circuit measurements induce errors in many-qubit circuits. Using this protocol, we detect and eliminate previously undetected measurement-induced crosstalk in a 20-qubit trapped-ion quantum computer. Then, we use the same protocol to measure the rate of measurement-induced crosstalk error on a 27-qubit IBM Q processor, and quantify how much of that error is eliminated by dynamical decoupling. Characterisation of quantum operations is fundamental in quantum technologies - quantum computing in particular - but there’s currently no reliably efficient method to assess mid-circuit measurements, which are a key component for subfields like quantum error correction. Here, the authors fill this gap, integrating MCMs into the framework of randomized benchmarking.
In dynamic quantum circuits, classical information from midcircuit measurements is fed forward during circuit execution. This emerging capability of quantum computers confers numerous advantages that can enable more efficient and powerful protocols by drastically reducing the resource requirements for certain core algorithmic primitives. In particular, in the case of the n-qubit quantum Fourier transform followed immediately by measurement, the scaling of resource requirements is reduced from O(n^{2}) two-qubit gates in an all-to-all connectivity in the standard unitary formulation to O(n) midcircuit measurements in its dynamic counterpart without any connectivity constraints. Here, we demonstrate the advantage of dynamic quantum circuits for the quantum Fourier transform on IBM's superconducting quantum hardware with certified process fidelities of >50% on up to 16 qubits and >1% on up to 37 qubits, exceeding previous reports across all quantum computing platforms. These results are enabled by our contribution of an efficient method for certifying the process fidelity, as well as of a dynamical decoupling protocol for error suppression during midcircuit measurements and feed forward within a dynamic quantum circuit that we call "feed-forward-compensated dynamical decoupling." Our results demonstrate the advantages of leveraging dynamic circuits in optimizing the compilation of quantum algorithms.
We propose Quantum Snapshot with Dynamic Circuit (QSDC), a hardware-agnostic, learning-driven framework for capturing quantum snapshots: non-destructive estimates of quantum states at arbitrary points within a quantum circuit, which can then be classically stored and later reconstructed. This functionality is vital for introspection, debugging, and memory in quantum systems, yet remains fundamentally constrained by the no-cloning theorem and the destructive nature of measurement. QSDC introduces a guess-and-check methodology in which a classical model, powered by either gradient-based neural networks or gradient-free evolutionary strategie, is trained to reconstruct an unknown quantum state using fidelity from the SWAP test as the sole feedback signal. Our approach supports single-copy, mid-circuit state reconstruction, assuming hardware with dynamic circuit support and sufficient coherence time. We validate core components of QSDC both in simulation and on IBM quantum hardware. In noiseless settings, our models achieve average fidelity up to 0.999 across 100 random quantum states; on real devices, we accurately reconstruct known single-qubit states (e.g., Hadamard) within three optimization steps.
Dynamic quantum circuits integrate unitary evolution with mid-circuit measurement and feedforward, enabling conditional operations essential for efficient quantum algorithms and foundational for fault-tolerant quantum computation. However, such operations introduce measurement-induced errors and control constraints that are not addressed by conventional error-suppression techniques. Here, we introduce an empirical learning framework that optimizes dynamical decoupling (DD) sequences for dynamic circuits at the level of circuit subintervals and qubit subregisters. Applying empirically learned DD sequences, we achieve a three-fold reduction in average dynamic circuit error rates as measured via randomized benchmarking. We apply the learned strategies to the dynamic circuit implementation of the quantum Fourier transform with measurement (QFT+M), demonstrating nontrivial process fidelity on connected chains of up to 20 qubits. Applying the resulting enhancement, we perform a high signal-to-noise QFT immediately following the preparation of a 10-qubit entangled state. Our results demonstrate that empirically optimized DD systematically outperforms theoretically derived sequences for dynamic circuits, establishing it as an efficient approach for error suppression in dynamic quantum circuits, with direct relevance to applications requiring measurement and feedback such as quantum error correction.