In dynamic quantum circuits, classical information from midcircuit measurements is fed forward during circuit execution. This emerging capability of quantum computers confers numerous advantages that can enable more efficient and powerful protocols by drastically reducing the resource requirements for certain core algorithmic primitives. In particular, in the case of the n-qubit quantum Fourier transform followed immediately by measurement, the scaling of resource requirements is reduced from O(n^{2}) two-qubit gates in an all-to-all connectivity in the standard unitary formulation to O(n) midcircuit measurements in its dynamic counterpart without any connectivity constraints. Here, we demonstrate the advantage of dynamic quantum circuits for the quantum Fourier transform on IBM's superconducting quantum hardware with certified process fidelities of >50% on up to 16 qubits and >1% on up to 37 qubits, exceeding previous reports across all quantum computing platforms. These results are enabled by our contribution of an efficient method for certifying the process fidelity, as well as of a dynamical decoupling protocol for error suppression during midcircuit measurements and feed forward within a dynamic quantum circuit that we call "feed-forward-compensated dynamical decoupling." Our results demonstrate the advantages of leveraging dynamic circuits in optimizing the compilation of quantum algorithms.
In dynamic quantum circuits, classical information from midcircuit measurements is fed forward during circuit execution. This emerging capability of quantum computers confers numerous advantages that can enable more efficient and powerful protocols by drastically reducing the resource requirements for certain core algorithmic primitives. In particular, in the case of the n-qubit quantum Fourier transform followed immediately by measurement, the scaling of resource requirements is reduced from O(n^{2}) two-qubit gates in an all-to-all connectivity in the standard unitary formulation to O(n) midcircuit measurements in its dynamic counterpart without any connectivity constraints. Here, we demonstrate the advantage of dynamic quantum circuits for the quantum Fourier transform on IBM's superconducting quantum hardware with certified process fidelities of >50% on up to 16 qubits and >1% on up to 37 qubits, exceeding previous reports across all quantum computing platforms. These results are enabled by our contribution of an efficient method for certifying the process fidelity, as well as of a dynamical decoupling protocol for error suppression during midcircuit measurements and feed forward within a dynamic quantum circuit that we call "feed-forward-compensated dynamical decoupling." Our results demonstrate the advantages of leveraging dynamic circuits in optimizing the compilation of quantum algorithms.
Dynamic quantum circuits integrate unitary evolution with mid-circuit measurement and feedforward, enabling conditional operations essential for efficient quantum algorithms and foundational for fault-tolerant quantum computation. However, such operations introduce measurement-induced errors and control constraints that are not addressed by conventional error-suppression techniques. Here, we introduce an empirical learning framework that optimizes dynamical decoupling (DD) sequences for dynamic circuits at the level of circuit subintervals and qubit subregisters. Applying empirically learned DD sequences, we achieve a three-fold reduction in average dynamic circuit error rates as measured via randomized benchmarking. We apply the learned strategies to the dynamic circuit implementation of the quantum Fourier transform with measurement (QFT+M), demonstrating nontrivial process fidelity on connected chains of up to 20 qubits. Applying the resulting enhancement, we perform a high signal-to-noise QFT immediately following the preparation of a 10-qubit entangled state. Our results demonstrate that empirically optimized DD systematically outperforms theoretically derived sequences for dynamic circuits, establishing it as an efficient approach for error suppression in dynamic quantum circuits, with direct relevance to applications requiring measurement and feedback such as quantum error correction.
Dynamic quantum circuits integrate mid-circuit measurements and feed-forward operations to enable real-time classical processing and conditional quantum logic. These capabilities are central to key quantum protocols such as quantum error correction, and have recently demonstrated significant potential for reducing quantum resources, including circuit depth and gate count, across a range of applications. However, executing dynamic circuits on real quantum hardware introduces a critical trade-off: while resource requirements decrease, circuit fidelity degrades due to high error rates of mid-circuit measurements, as well as the decoherence errors accumulated during the extended idle periods introduced by both mid-circuit measurements and feed-forward operations. In this paper, we systematically investigate the impact of standard error mitigation techniques on dynamic circuit applications pertaining to Hamiltonian simulation and ground state estimation of physically relevant systems like the Heisenberg model. We explore dynamical decoupling (DD) as a strategy to suppress decoherence and crosstalk errors during idle windows introduced by mid-circuit measurements and feed-forward delays, and also examine error mitigation via zero-noise extrapolation (ZNE). Through experiments conducted on IBM quantum hardware, we benchmark effective combinations of these strategies that maximize the practical benefits of dynamic quantum circuits in these applications. We demonstrate that a combination of DD and ZNE is effective in mitigating the errors introduced during mid-circuit measurements and feed-forward operations, as well as the errors arising from faulty measurements. This approach yields a energy gap improvement of at least 60% in ground state estimation and reduces observed error of time-evolved states by up to 99% for the Ising model and up to 20% for the Heisenberg model.
Dynamic quantum circuits (DQCs) provide a hardware-efficient route to quantum computing by reducing physical-qubit overhead and compressing circuit topology through mid-circuit measurements, qubit reset and reuse, and classical feed-forward control. Here, we demonstrate the advantages of DQCs on a single hybrid superconducting qubit-cavity processor by implementing a hierarchy of algorithms with increasing complexity. This hybrid architecture consists of a high-dimensional cavity qudit serving as the computational register and a dispersively coupled superconducting transmon ancilla that is repeatedly measured, reset, and reused to enable dynamic control. Using this device, we implement a 10-bit Bernstein-Vazirani algorithm with an average success probability of 82%, surpassing state-of-the-art dynamic and static implementations in both scale and performance; an 8-bit quantum phase-estimation protocol with estimation errors below 10-3; and the first dynamic-circuit implementation of Shor's algorithm on a superconducting platform, factoring 15 over all coprime bases with squared statistical overlap values above 99.8%. These results provide concrete benchmarks for future DQC implementations and highlight the versatile advantages of DQCs with the hybrid qubit-qudit architecture, establishing it as a promising route toward scalable, programmable quantum computation.
The practical applications of quantum computing is currently limited by the small number of available qubits. Recent advances in quantum hardware have introduced midcircuit measurements and resets, enabling the reuse of measured qubits and thus reducing the qubit requirements for executing quantum algorithms. In this work, we present a systematic study of dynamic quantum circuit compilation, a process that transforms static quantum circuits into their dynamic equivalents with fewer qubits through qubit reuse. We establish the first graph-based framework for optimizing qubit-reuse compilation. In particular, we characterize the task of finding the optimal compilation strategy for maximizing qubit reuse using binary integer programming and provide efficient heuristic algorithms for devising general compilation strategies. We conduct a thorough analysis of quantum circuits with practical relevance and offer their optimal qubit-reuse compilation strategies. We also perform a comparative analysis against state-of-the-art approaches, demonstrating the superior performance of our methods in both structured and random quantum circuits. Our framework lays a rigorous foundation for understanding dynamic quantum circuit compilation via qubit reuse, holding significant promise for the practical implementation of large-scale quantum algorithms on quantum computers with limited resources.
To date, quantum computation on real, physical devices has largely been limited to simple, time-ordered sequences of unitary operations followed by a final projective measurement. As hardware platforms for quantum computing continue to mature in size and capability, it is imperative to enable quantum circuits beyond their conventional construction. Here we break into the realm of dynamic quantum circuits on a superconducting-based quantum system. Dynamic quantum circuits not only involve the evolution of the quantum state throughout the computation but also periodic measurements of qubits midcircuit and concurrent processing of the resulting classical information on timescales shorter than the execution times of the circuits. Using noisy quantum hardware, we explore one of the most fundamental quantum algorithms, quantum phase estimation, in its adaptive version, which exploits dynamic circuits, and compare the results to a nonadaptive implementation of the same algorithm. We demonstrate that the version of real-time quantum computing with dynamic circuits can yield results comparable to an approach involving classical asynchronous postprocessing, thus opening the door to a new realm of available algorithms on real quantum systems.
Dynamic quantum circuits with mid-circuit measurements (MCMs) and feed-forward operations play a crucial role in various applications, such as quantum error correction and quantum algorithms. With advancements in quantum hardware enabling the implementation of MCM and feed-forward loops, the use of dynamic circuits has become increasingly prevalent. There is a significant need for a benchmarking framework specially designed for dynamic circuits to capture their unique properties, as current benchmarking tools are designed primarily for unitary circuits and cannot be trivially extended to dynamic circuits. We propose dynamarq, a scalable and hardware-agnostic benchmarking framework for dynamic circuits. We collect a set of dynamic circuit benchmarks spanning various applications and propose a broad set of circuit features to characterize the structure of these dynamic circuits. We run them on two IBM quantum processors and the Quantinuum Helios-1E emulator, and propose scalable, application-dependent fidelity scores for each benchmark based on hardware execution results. We perform statistical modeling to identify correlations between circuit features and fidelity scores, and demonstrate highly accurate fidelity prediction using our model. Our model parameters are also transferable across hardware backends and calibration cycles. Our framework facilitates the understanding of dynamic circuit structures and provides insights for designing and optimizing dynamic circuits to achieve high execution fidelity on quantum hardware.