Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2603.11293

Focusing Surface-Acoustic-Wave Resonators on Thin-Film Lithium Niobate with Transverse-Mode Suppression

Ryo Sasaki, Ryusuke Hisatomi, Rekishu Yamazaki, Yuya Yamaguchi, Yasunobu Nakamura, Atsushi Noguchi

quant-phphysics.opticsSubmitted Mar 11, 2026• Announced Mar 13, 2026
v1 · Mar 11, 2026v2 · Jul 21, 2026
arXivHTMLPDF

Abstract

Surface-acoustic-wave (SAW) resonators are a promising platform for constructing hybrid quantum systems, where confined acoustic waves enable strong interaction with various physical systems. Focusing SAW resonators, reducing mode volume while suppressing diffraction losses, have recently been investigated for application in such hybrid systems. However, the resonator leads to additional transverse-mode resonances, which cause undesired responses. In this work, we develop single-mode focusing SAW resonators on a thin-film lithium niobate on sapphire. A film thinner than the SAW wavelength allows a highly confined acoustic-wave mode to be localized on the substrate surface. By using contoured electrodes following a two-dimensional Gaussian beam shape, we make the SAW mode focused to nearly a diffraction-limited and confirm it via optical imaging. The apodization technique applied to the interdigitated transducer electrodes suppresses the excitation of higher-order transverse modes.

DOI
10.1103/5kq4-c6rr
Comments
10 pages, 9 figures

Related papers

Candidate overtone shear horizontal SAW resonators in thin-film lithium niobate for intermodal acousto-optic modulation

Wenbing Jiang, Xuankai Xu, Yu Guo +5 more

The merits of thin-film surface acoustic wave (SAW) devices are pivotal to develop the high-performance intermodal acousto-optic modulators. In this work, we have proposed shear-horizontal (SH) SAW resonators for anticipated intermodal acousto-optic modulation on the thin-film lithium niobate platform. Through optimization of the cut angle of LN films, the SAW wavelength, and the thickness of interdigital transducer (IDT) electrodes, the calculated acousto-optic overlap factors utilizing SH0 modes are improved by more than an order of magnitude compared with those of Rayleigh modes. Furthermore, we have fabricated and characterized three kinds of proof-of-principle SH0 mode devices without/with grating reflectors. The electromechanical coupling coefficients (keff^2) and quality factors (Q) in the overtone resonators with grating reflectors are systematically evaluated, featuring the highest Q of 843 with the compromised keff^2 of 0.96%-4.72%. The results reveal that the temperature coefficients of frequency (TCF) of Rayleigh modes vary across various overtones, whereas the SH0 modes exhibit TCFs in the range of 32.3-68.9 ppm/C. Our fabricated SH0-mode overtone resonators demonstrate the capability of operating at power levels up to 29 dBm without electrode damage, offering a promising paradigm for robust and high-efficiency intermodal acousto-optic modulators with potential applications in integrated optical signal processing, microwave photonics,and quantum information technologies.

physics.opticsCross-listedarXiv:2606.12853•Jun 12, 2026

On-chip integration and strong coupling between ScAlN thin-film surface acoustic wave resonators and superconducting qubits

Junfeng Chen, Xiaoliang He, Wanpeng Gao +6 more

Thin-film surface acoustic wave (SAW) devices exhibit high quality factors and are promising candidates for quantum transducers, with significant potential for on-chip integration with high-coherence superconducting quantum circuits and optical resonators. However, the experimental demonstration of strong coupling between thin-film SAWs and superconducting qubits in the quantum regime remains a considerable challenge. In this study, we demonstrate strong coupling between a ScAlN thin-film SAW resonator and a high-coherence qubit on the same substrate, where the enhanced qubit coherence was achieved through selective ScAlN etching. Distinct multimode anticrossings are observed in both the qubit and SAW resonator frequency spectra, with extracted coupling strengths closely matching theoretical predictions. Additionally, we investigate qubit decay and the dissipation properties of the SAW resonator in the SAW-qubit hybrid system. Our results confirm the feasibility of integrating thin-film SAW devices with high-coherence superconducting circuits and offer valuable insights for optimizing the performance of such hybrid systems.

Applied Physics Letters•Apr 1, 2025•5 citations

Thin film aluminum nitride surface acoustic wave resonators for quantum acoustodynamics

Wenbing Jiang, Junfeng Chen, Xiaoyu Liu +5 more

Quantum excitations of macroscopic surface acoustic waves (SAWs) have been tailored to control, communicate, and transduce stationary and flying quantum states. However, the limited lifetime of these hybrid quantum systems remains critical obstacles to extend their applications in quantum information processing. Here, we present potentials of thin film aluminum nitride to on-chip integrated phonons with superconducting qubits over previous bulk piezoelectric substrates. We have reported high-quality thin film GHz-SAW resonators with the highest internal quality factor Qi of 4.92×104 in the quantum regime. The internal losses of SAW resonators are systematically investigated by tuning the parameters of sample layout, power, and temperature. Our results manifest that SAWs on piezoelectric films are readily integrated with standard fabrication of Josephson junction quantum circuits and offer excellent acoustic platforms for high-coherence quantum acoustodynamics architectures.

arXiv:2304.00511•Applied Physics Letters•Jul 10, 2023•11 citations

Piezoelectric loss of superconducting microwave resonators integrated with thin-film lithium niobate

Likai Yang, Yuntao Xu, Chunzhen Li +3 more

Thin-film lithium niobate (LN) has become an enabling platform in the development of quantum integrated circuits, for applications including microwave-to-optical converters and electromechanical transducers. Incorporation of high-quality planar superconducting resonators will further elevate the performance of these devices. However, alongside the desired interactions originated from LN, its piezoelectric nature also introduces parasitic coupling between microwave and phononic modes, resulting in excessive dielectric loss. In this work, we investigate such coupling by studying niobium nitride resonators directly deposited on patterned LN thin films. By varying device configuration, we pinpoint that overlapping electric field with LN can inadvertently excite bulk acoustic modes within the substrate, inducing microwave loss independent of the acoustic dissipation rate. The experimental results are supported by simulation and theoretical modeling. Our approach can be applied to different piezoelectric systems and provide insights into the design of microwave components for quantum transduction devices.

Physical Review Applied•Nov 13, 2023•4 citations

Heterogeneous integration of superconducting thin films and epitaxial semiconductor heterostructures with lithium niobate

Michelle Lienhart, Michael Choquer, Emeline D. S. Nysten +5 more

Abstract We report on scalable heterointegration of superconducting electrodes and epitaxial semiconductor quantum dots (QDs) on strong piezoelectric and optically nonlinear lithium niobate. The implemented processes combine the sputter-deposited thin film superconductor niobium nitride and III–V compound semiconductor membranes onto the host substrate. The superconducting thin film is employed as a zero-resistivity electrode material for a surface acoustic wave resonator with internal quality factors Q ≈ 17 000 representing a three-fold enhancement compared to identical devices with normal conducting electrodes. Superconducting operation of ≈ 400 M H z resonators is achieved to temperatures T > 7 K and electrical radio frequency powers P r f > + 9 d B m . Heterogeneously integrated single QDs couple to the resonant phononic field of the surface acoustic wave resonator operated in the superconducting regime. Position and frequency selective coupling mediated by deformation potential coupling is validated using time-integrated and time-resolved optical spectroscopy. Furthermore, acoustoelectric charge state control is achieved in a modified device geometry harnessing large piezoelectric fields inside the resonator. The hybrid QD—surface acoustic wave resonator can be scaled to higher operation frequencies and smaller mode volumes for quantum phase modulation and transduction between photons and phonons via the QD. Finally, the employed materials allow for the realization of other types of optoelectronic devices, including superconducting single photon detectors and integrated photonic and phononic circuits.

arXiv:2302.02712•Journal of Physics D Applied Physics•May 23, 2023•10 citations

Surface modification and coherence in lithium niobate SAW resonators

Rachel G. Gruenke, Oliver A. Hitchcock, E. Alex Wollack +5 more

Lithium niobate is a promising material for developing quantum acoustic technologies due to its strong piezoelectric effect and availability in the form of crystalline thin films of high quality. However, at radio frequencies and cryogenic temperatures, these resonators are limited by the presence of decoherence and dephasing due to two-level systems. To mitigate these losses and increase device performance, a more detailed picture of the microscopic nature of these loss channels is needed. In this study, we fabricate several lithium niobate acoustic wave resonators and apply different processing steps that modify their surfaces. These treatments include argon ion sputtering, annealing, and acid cleans. We characterize the effects of these treatments using three surface-sensitive measurements: cryogenic microwave spectroscopy measuring density and coupling of TLS to mechanics, X-ray photoelectron spectroscopy and atomic force microscopy. We learn from these studies that, surprisingly, increases of TLS density may accompany apparent improvements in the surface quality as probed by the latter two approaches. Our work outlines the importance that surfaces and fabrication techniques play in altering acoustic resonator coherence, and suggests gaps in our understanding as well as approaches to address them.

arXiv:2306.14813•Scientific Reports•Mar 20, 2024•18 citations
Surface-acoustic-wave (SAW) resonators are a promising platform for constructing hybrid quantum systems, where confined acoustic waves enable strong interaction with various physical systems. Focusing SAW resonators, reducing mode volume while suppressing diffraction losses, have recently been investigated for application in such hybrid systems. However, the resonator leads to additional transverse-mode resonances, which cause undesired responses. In this work, we develop single-mode focusing SAW resonators on a thin-film lithium niobate on sapphire. A film thinner than the SAW wavelength allows a highly confined acoustic-wave mode to be localized on the substrate surface. By using contoured electrodes following a two-dimensional Gaussian beam shape, we make the SAW mode focused to nearly a diffraction-limited and confirm it via optical imaging. The apodization technique applied to the interdigitated transducer electrodes suppresses the excitation of higher-order transverse modes.
The merits of thin-film surface acoustic wave (SAW) devices are pivotal to develop the high-performance intermodal acousto-optic modulators. In this work, we have proposed shear-horizontal (SH) SAW resonators for anticipated intermodal acousto-optic modulation on the thin-film lithium niobate platform. Through optimization of the cut angle of LN films, the SAW wavelength, and the thickness of interdigital transducer (IDT) electrodes, the calculated acousto-optic overlap factors utilizing SH0 modes are improved by more than an order of magnitude compared with those of Rayleigh modes. Furthermore, we have fabricated and characterized three kinds of proof-of-principle SH0 mode devices without/with grating reflectors. The electromechanical coupling coefficients (keff^2) and quality factors (Q) in the overtone resonators with grating reflectors are systematically evaluated, featuring the highest Q of 843 with the compromised keff^2 of 0.96%-4.72%. The results reveal that the temperature coefficients of frequency (TCF) of Rayleigh modes vary across various overtones, whereas the SH0 modes exhibit TCFs in the range of 32.3-68.9 ppm/C. Our fabricated SH0-mode overtone resonators demonstrate the capability of operating at power levels up to 29 dBm without electrode damage, offering a promising paradigm for robust and high-efficiency intermodal acousto-optic modulators with potential applications in integrated optical signal processing, microwave photonics,and quantum information technologies.
Thin-film surface acoustic wave (SAW) devices exhibit high quality factors and are promising candidates for quantum transducers, with significant potential for on-chip integration with high-coherence superconducting quantum circuits and optical resonators. However, the experimental demonstration of strong coupling between thin-film SAWs and superconducting qubits in the quantum regime remains a considerable challenge. In this study, we demonstrate strong coupling between a ScAlN thin-film SAW resonator and a high-coherence qubit on the same substrate, where the enhanced qubit coherence was achieved through selective ScAlN etching. Distinct multimode anticrossings are observed in both the qubit and SAW resonator frequency spectra, with extracted coupling strengths closely matching theoretical predictions. Additionally, we investigate qubit decay and the dissipation properties of the SAW resonator in the SAW-qubit hybrid system. Our results confirm the feasibility of integrating thin-film SAW devices with high-coherence superconducting circuits and offer valuable insights for optimizing the performance of such hybrid systems.
Quantum excitations of macroscopic surface acoustic waves (SAWs) have been tailored to control, communicate, and transduce stationary and flying quantum states. However, the limited lifetime of these hybrid quantum systems remains critical obstacles to extend their applications in quantum information processing. Here, we present potentials of thin film aluminum nitride to on-chip integrated phonons with superconducting qubits over previous bulk piezoelectric substrates. We have reported high-quality thin film GHz-SAW resonators with the highest internal quality factor Qi of 4.92×104 in the quantum regime. The internal losses of SAW resonators are systematically investigated by tuning the parameters of sample layout, power, and temperature. Our results manifest that SAWs on piezoelectric films are readily integrated with standard fabrication of Josephson junction quantum circuits and offer excellent acoustic platforms for high-coherence quantum acoustodynamics architectures.
Thin-film lithium niobate (LN) has become an enabling platform in the development of quantum integrated circuits, for applications including microwave-to-optical converters and electromechanical transducers. Incorporation of high-quality planar superconducting resonators will further elevate the performance of these devices. However, alongside the desired interactions originated from LN, its piezoelectric nature also introduces parasitic coupling between microwave and phononic modes, resulting in excessive dielectric loss. In this work, we investigate such coupling by studying niobium nitride resonators directly deposited on patterned LN thin films. By varying device configuration, we pinpoint that overlapping electric field with LN can inadvertently excite bulk acoustic modes within the substrate, inducing microwave loss independent of the acoustic dissipation rate. The experimental results are supported by simulation and theoretical modeling. Our approach can be applied to different piezoelectric systems and provide insights into the design of microwave components for quantum transduction devices.
Abstract We report on scalable heterointegration of superconducting electrodes and epitaxial semiconductor quantum dots (QDs) on strong piezoelectric and optically nonlinear lithium niobate. The implemented processes combine the sputter-deposited thin film superconductor niobium nitride and III–V compound semiconductor membranes onto the host substrate. The superconducting thin film is employed as a zero-resistivity electrode material for a surface acoustic wave resonator with internal quality factors Q ≈ 17 000 representing a three-fold enhancement compared to identical devices with normal conducting electrodes. Superconducting operation of ≈ 400 M H z resonators is achieved to temperatures T > 7 K and electrical radio frequency powers P r f > + 9 d B m . Heterogeneously integrated single QDs couple to the resonant phononic field of the surface acoustic wave resonator operated in the superconducting regime. Position and frequency selective coupling mediated by deformation potential coupling is validated using time-integrated and time-resolved optical spectroscopy. Furthermore, acoustoelectric charge state control is achieved in a modified device geometry harnessing large piezoelectric fields inside the resonator. The hybrid QD—surface acoustic wave resonator can be scaled to higher operation frequencies and smaller mode volumes for quantum phase modulation and transduction between photons and phonons via the QD. Finally, the employed materials allow for the realization of other types of optoelectronic devices, including superconducting single photon detectors and integrated photonic and phononic circuits.
Lithium niobate is a promising material for developing quantum acoustic technologies due to its strong piezoelectric effect and availability in the form of crystalline thin films of high quality. However, at radio frequencies and cryogenic temperatures, these resonators are limited by the presence of decoherence and dephasing due to two-level systems. To mitigate these losses and increase device performance, a more detailed picture of the microscopic nature of these loss channels is needed. In this study, we fabricate several lithium niobate acoustic wave resonators and apply different processing steps that modify their surfaces. These treatments include argon ion sputtering, annealing, and acid cleans. We characterize the effects of these treatments using three surface-sensitive measurements: cryogenic microwave spectroscopy measuring density and coupling of TLS to mechanics, X-ray photoelectron spectroscopy and atomic force microscopy. We learn from these studies that, surprisingly, increases of TLS density may accompany apparent improvements in the surface quality as probed by the latter two approaches. Our work outlines the importance that surfaces and fabrication techniques play in altering acoustic resonator coherence, and suggests gaps in our understanding as well as approaches to address them.