arXiv:2602.12248 · Physical review. B./Physical review. B
Simultaneous high-fidelity readout and strong coupling in a donor-based spin qubit
Si Yan Koh, Weifan Wu, Kelvin Onggadinata, Arghya Maity, Mark Chiyuan Ma, Calvin Pei Yu Wong, Kuan Eng Johnson Goh, Bent Weber, Hui Khoon Ng, Teck Seng Koh
Superconducting resonators coupled to solid-state qubits offer a scalable architecture for long-range entangling operations and fast, high-fidelity readout. Realizing this requires low photon-loss rates and qubits with tunable electric dipole moments that couple strongly to the resonator's electric field while maintaining long coherence times. For spin qubits, spin-photon coupling is typically achieved via spin-charge hybridization. However, this introduces a fundamental trade-off: a large spin-charge admixture enhances the coupling strength, which boosts readout and resonator-mediated gate speeds, but exposes the qubit to increased decoherence, thereby increasing the threshold required for strong coupling and limiting the time available for accurate state measurement. This makes it essential to identify optimal operating points for each qubit platform. We address this for the donor-based flip-flop qubit, whose microwave-controllable electron-nuclear spin states make it suitable for coupling to microwave resonators. We demonstrate that, by choosing intermediate tunnel couplings that balance strong interaction with long qubit lifetimes, high-fidelity readout and strong coupling are simultaneously achievable. We also map out the respective charge-photon couplings and photon-loss rates required. Furthermore, we show that experimental constraints on charge-photon coupling and photon loss can be mitigated using squeezed input fields. As similar trade-offs appear in quantum-dot-based qubits, our methods and insights extend naturally to these platforms, offering a potential route toward scalable architectures.
Superconducting resonators coupled to solid-state qubits offer a scalable architecture for long-range entangling operations and fast, high-fidelity readout. Realizing this requires low photon-loss rates and qubits with tunable electric dipole moments that couple strongly to the resonator's electric field while maintaining long coherence times. For spin qubits, spin-photon coupling is typically achieved via spin-charge hybridization. However, this introduces a fundamental trade-off: a large spin-charge admixture enhances the coupling strength, which boosts readout and resonator-mediated gate speeds, but exposes the qubit to increased decoherence, thereby increasing the threshold required for strong coupling and limiting the time available for accurate state measurement. This makes it essential to identify optimal operating points for each qubit platform. We address this for the donor-based flip-flop qubit, whose microwave-controllable electron-nuclear spin states make it suitable for coupling to microwave resonators. We demonstrate that, by choosing intermediate tunnel couplings that balance strong interaction with long qubit lifetimes, high-fidelity readout and strong coupling are simultaneously achievable. We also map out the respective charge-photon couplings and photon-loss rates required. Furthermore, we show that experimental constraints on charge-photon coupling and photon loss can be mitigated using squeezed input fields. As similar trade-offs appear in quantum-dot-based qubits, our methods and insights extend naturally to these platforms, offering a potential route toward scalable architectures.
Strong coupling of semiconductor spin qubits to superconducting microwave resonators was recently demonstrated [X. Mi et al., Nature 555, 599 (2018); A. J. Landig et al., Nature 560, 179 (2018); N. Samkharadze et al., Science 359, 1123 (2018); T. Cubaynes et al., NPJ Quant. Inf. 5, 47 (2019)]. These breakthroughs pave the way for quantum information processing that combines the long coherence times of solid-state spin qubits with the long-distance connectivity, fast control, and fast high-fidelity quantum-non-demolition readout of existing superconducting qubit implementations. Here we theoretically analyze and optimize the dispersive readout of a single spin in a semiconductor double quantum dot (DQD) coupled to a microwave resonator via its electric dipole moment. The strong spin-photon coupling arises from the motion of the electron spin in a local magnetic field gradient. We calculate the signal-to-noise ratio (SNR) of the readout accounting for both Purcell spin relaxation and spin relaxation arising from intrinsic electric noise within the semiconductor. We express the maximum achievable SNR in terms of the cooperativity associated with these two dissipation processes. We find that while the cooperativity increases with the strength of the dipole coupling between the DQD and the resonator, it does not depend on the strength of the magnetic field gradient. We then optimize the SNR as a function of experimentally tunable DQD parameters. We identify wide regions of parameter space where the unwanted backaction of the resonator photons on the qubit is small. Moreover, we find that the coupling of the resonator to other DQD transitions can enhance the SNR by at least a factor of two, a ``straddling'' effect [J. Koch et al., Phys. Rev. A 76, 042319 (2007)] that occurs only at nonzero energy detuning of the DQD double-well potential. We estimate that with current technology, single-shot readout fidelities in the range 82--95% can be achieved within a few $\ensuremath{\mu}\mathrm{s}$ of readout time without requiring the use of Purcell filters.
Spin qubits in semiconducting quantum dots are currently limited by slow readout processes, which are orders of magnitude slower than gate operations. In contrast, Andreev spin qubits benefit from fast measurement schemes enabled by the large resonator couplings of superconducting qubits but suffer from reduced coherence during qubit operations. Here, we propose fast and high-fidelity measurement protocols based on an electrically tunable coupling between quantum dot and Andreev spin qubits. In realistic devices, this coupling can be made sufficiently strong to enable high-fidelity readout well below microseconds, potentially enabling mid-circuit measurements. Crucially, the electrical tunability of our coupler permits to switch it off during idle periods, minimizing crosstalk and measurement back-action. Our approach is fully compatible with germanium-based devices and paves the way for scalable quantum computing architectures by leveraging the advantages of heterogeneous qubit implementations.
Semiconductor double quantum dot (DQD) qubits coupled via superconducting microwave resonators provide a powerful means of long-range manipulation of the qubits' spin and charge degrees of freedom. Quantum gates can be implemented by parametrically driving the qubits while their transition frequencies are detuned from the resonator frequency. Long-range two-qubit controlled-Z (CZ) gates have been proposed for the DQD spin qubit within the rotating-wave approximation (RWA). Rapid gates demand strong coupling, but RWA breaks down when coupling strengths become significant relative to system frequencies. Therefore, understanding the errors arising from approximations used is critical for high-fidelity operation. Here, we go beyond RWA to study CZ gate fidelity for both DQD spin and charge qubits. We propose a novel parametric drive on the charge qubit that produces smaller errors and show that the fidelity of the CZ gate outperforms its spin counterpart, resulting in a much smaller fidelity loss of 0.05% compared to 0.80% for the spin qubit, and greater robustness against qubit dephasing and photon loss. We find that drive amplitude -- a parameter dropped in RWA -- is critical for optimizing fidelity, with the charge qubit exhibiting better tolerance to drive amplitude variations. Our results demonstrate the necessity of going beyond RWA in understanding how long-range gates can be realized in DQD qubits, with charge qubits offering considerable advantages in high-fidelity operation.
Quantum computing is a powerful way of improving computing efficiency. For some specific problems, quantum processor can exponentially reduce computation time compared to the classical computer. Cavity quantum electrodynamics, which studies the coherent interaction between photons in an optical cavity and atoms or other two-level systems, is of enormous significance to quantum computing and quantum information processing. The strong coupling regime where a cavity photon mode and an atom exchange a single quantum energy coherently has attracted extensive interest in varied experimental platforms and systems such as alkali atoms, Rydberg atoms, large spin ensembles, magnons, etc. The semiconductor gate-defined double quantum dot (DQD) system is one of the most promising platforms that possesses advantages of advanced micro-nano processing technology and outstanding scalability. Introducing the concept of cavity QED into superconducting circuits (circuit QED, cQED), provides an opportunity to study interaction between electrons confined in semiconductor DQD and photons trapped in a superconducting resonator. Reaching strong coupling regime in this hybrid system paves the way to large-scale network of quantum computing. Electrons confined in DQD have large electrical dipoles, thus are able to couple to photons with relatively large coupling rate. Whereas, due to the charge noise and other dissipation channels in the hybrid system, the decoherence rate of the system is larger than the coupling rate, leaving the strong coupling a great challenge. In recent years, different methods have been proposed to access the strong coupling regime. Taking advantage of a high-quality heterojunction structure, an overlapping gate architecture and a low-pass LC filter on the DC bias line, the decoherence of the charge qubit and microwave leakage of the resonator can be effectively suppressed. The coupling strength of the hybrid system can be improved utilizing a high impedance resonator which is comprised of high kinetic inductance materials. Spin, which does not interact directly with the electric field, is insensitive to charge noise and has much longer decoherence time than charge qubit. However, the weak interaction results in a small coupling rate between the spin and the photon. To solve this problem, the method of coherent hybridization between the spin and the charge state is proposed to improve the coupling strength. This hybridization can be achieved by applying a non-uniform magnetic field, utilizing spin-orbit interaction or spin exchange interaction. At present, both charge qubits and spin qubits have achieved strong coupling with the cavity and the coupling distance between long-range qubits is greatly expanded as long as millimeters. This review introduces basic ideas about cQED and fundamental elements in semiconductor cQED systems. Recent progress in strong coupling hybrid system and methods for improving coupling structures are discussed. In future research, more efforts will be devoted into long-range transfer of qubit states and photon-mediated two or multi-qubit gates.
Spin qubits in semiconductor quantum dots constitute one of the leading platforms for quantum information processing, combining long coherence times, high-fidelity gate operations, and compatibility with semiconductor industry technologies. In particular, holes confined in planar Ge/SiGe heterostructures have recently emerged as promising qubit candidates owing to their low effective mass, high mobility, low percolation density, absence of valley states, and strong spin-orbit interaction, which enables fast all-electrical spin control. At the same time, spin-orbit interaction also gives rise to a highly anisotropic and electrically tunable gyromagnetic response. Understanding and controlling this response is therefore essential for high-fidelity single- and multi-qubit operations. The realization of scalable quantum processors also requires efficient qubit readout and long-range connectivity. Circuit quantum electrodynamics (cQED), based on the coupling between artificial atoms and microwave photons confined in superconducting resonators, provides a natural framework to address these challenges. However, the implementation of hybrid semiconductor-superconductor devices in planar Ge has so far been hindered by large microwave losses originating from the heterostructure. In this thesis, we demonstrate, for the first time in planar Ge, strong coupling between a hole charge qubit in a double quantum dot and a high-impedance microwave resonator, reaching a cooperativity of C â 100. In addition, we leverage the frequency tunability of the resonator to perform detailed spectroscopy of a multi-level energy spectrum of low-lying states arising from strong Coulomb-correlation effects. To further improve the quality of the hole-photon interface, we investigate the source of microwave losses in different Ge/SiGe heterostructures, identifying defects at the lattice-mismatched Si/Ge interface as the dominant source of resonator losses in reverse-graded heterostructures. To mitigate this limitation, a deep tapered-etching approach is introduced, enabling the fabrication of superconducting resonators directly on etched heterostructures. This method yields internal quality factors exceeding Qint > 10 000 for high-impedance Josephson junction array resonators and Qint > 100 000 for 50 â Nb resonators. Finally, this thesis explores the spin properties of multi-hole quantum dots beyond the conventional single-orbital picture. By reconstructing and electrically tuning the g tensors of holes confined in different orbital states, we show that confinement can substantially modify both their magnitude and orientation. These results open new opportunities for engineering qubit properties through orbital occupation. Furthermore, highly coherent singlet-triplet oscillations are demonstrated in the seven-hole regime, yielding a quality factor of approximately 330 at in-plane magnetic fields as low as 2.5 mT. Together, these results establish a foundation for high-fidelity hole-spin-qubit operation based on g-tensor engineering and for the integration of planar Ge quantum dots with superconducting quantum circuits.
Fast and high-fidelity qubit measurement is essential for realizing quantum error correction, which is in turn a key ingredient to universal quantum computing. For electron spin qubits, fast readout is one of the significant road blocks toward error correction. Here we examine the dispersive readout of a single spin in a semiconductor double quantum dot coupled to a microwave resonator. We show that using displaced squeezed vacuum states for the probing photons can improve the qubit readout fidelity and speed. Under condition of proper phase matching, we find that a moderate, and only moderate, squeezing can enhance both the signal-to-noise ratio and the fidelity of the qubit-state readout, and the optimal readout time can be shortened to the sub-microsecond range with above 99% fidelity. These enhancements are achieved at low probing microwave intensity, ensuring non-demolition qubit measurement.