Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1905.09702 · Physical review. B./Physical review. B

Optimal dispersive readout of a spin qubit with a microwave resonator

Benjamin D’Anjou, Guido Burkard

Published Dec 23, 2019• 45 citations
arXivHTMLPDF

Abstract

Strong coupling of semiconductor spin qubits to superconducting microwave resonators was recently demonstrated [X. Mi et al., Nature 555, 599 (2018); A. J. Landig et al., Nature 560, 179 (2018); N. Samkharadze et al., Science 359, 1123 (2018); T. Cubaynes et al., NPJ Quant. Inf. 5, 47 (2019)]. These breakthroughs pave the way for quantum information processing that combines the long coherence times of solid-state spin qubits with the long-distance connectivity, fast control, and fast high-fidelity quantum-non-demolition readout of existing superconducting qubit implementations. Here we theoretically analyze and optimize the dispersive readout of a single spin in a semiconductor double quantum dot (DQD) coupled to a microwave resonator via its electric dipole moment. The strong spin-photon coupling arises from the motion of the electron spin in a local magnetic field gradient. We calculate the signal-to-noise ratio (SNR) of the readout accounting for both Purcell spin relaxation and spin relaxation arising from intrinsic electric noise within the semiconductor. We express the maximum achievable SNR in terms of the cooperativity associated with these two dissipation processes. We find that while the cooperativity increases with the strength of the dipole coupling between the DQD and the resonator, it does not depend on the strength of the magnetic field gradient. We then optimize the SNR as a function of experimentally tunable DQD parameters. We identify wide regions of parameter space where the unwanted backaction of the resonator photons on the qubit is small. Moreover, we find that the coupling of the resonator to other DQD transitions can enhance the SNR by at least a factor of two, a ``straddling'' effect [J. Koch et al., Phys. Rev. A 76, 042319 (2007)] that occurs only at nonzero energy detuning of the DQD double-well potential. We estimate that with current technology, single-shot readout fidelities in the range 82--95% can be achieved within a few $\ensuremath{\mu}\mathrm{s}$ of readout time without requiring the use of Purcell filters.

DOI
10.1103/physrevb.100.245427

Related papers

Fast and high-fidelity dispersive readout of a spin qubit with squeezed microwave and resonator nonlinearity

Chon‐Fai Kam, Xuedong Hu

Abstract Fast and high-fidelity qubit measurement is crucial for achieving quantum error correction, a fundamental element in the development of universal quantum computing. For electron spin qubits, fast readout stands out as a major obstacle in the pursuit of error correction. In this work, we explore the dispersive measurement of an individual spin in a semiconductor double quantum dot coupled to a nonlinear microwave resonator. By utilizing displaced squeezed vacuum states, we achieve rapid and high-fidelity readout for semiconductor spin qubits. Our findings reveal that introducing modest squeezing and mild nonlinearity can significantly improve both the signal-to-noise ratio (SNR) and the fidelity of qubit-state readout. By properly marching the phases of squeezing, the nonlinear strength, and the local oscillator, the optimal readout time can be reduced to the sub-microsecond range. With current technology parameters ($\kappa\approx 2\chi_s$, $\chi_s/(2\pi)\approx 0.15 \:\mbox{MHz}$), utilizing a displaced squeezed vacuum state with $30$ photons and a modest squeezing parameter $r\approx 0.6$, along with a nonlinear microwave resonator charactered by a strength of $\lambda\approx -1.2 \chi_s$, a readout fidelity of $98\%$ can be attained within a readout time of around $0.6\:\mu\mbox{s}$. Intriguing, by using a positive nonlinear strength of $\lambda\approx 1.2\chi_s$, it is possible to achieve an SNR of approximately $6$ and a readout fidelity of $99.99\%$ at a slightly later time, around $0.9\:\mu\mbox{s}$, while maintaining all other parameters at the same settings.

npj Quantum Information•Dec 28, 2024•8 citations

Fast and high-fidelity dispersive readout of a spin qubit via squeezing and resonator nonlinearity

Chon‐Fai Kam, Xuedong Hu

Fast and high-fidelity qubit measurement is crucial for achieving quantum error correction, a fundamental element in the development of universal quantum computing. For electron spin qubits, fast readout stands out as a major obstacle in the pursuit of error correction. In this work, we explore the dispersive measurement of an individual spin in a semiconductor double quantum dot coupled to a nonlinear microwave resonator. By utilizing displaced squeezed vacuum states, we achieve rapid and high-fidelity readout for semiconductor spin qubits. Our findings reveal that introducing modest squeezing and mild nonlinearity can significantly improve both the signal-to-noise ratio (SNR) and the fidelity of qubit-state readout. By properly marching the phases of squeezing, the nonlinear strength, and the local oscillator, the optimal readout time can be reduced to the sub-microsecond range. With current technology parameters ($κ\approx 2χ_s$, $χ_s\approx 2π\times 0.15 \:\mbox{MHz}$), utilizing a displaced squeezed vacuum state with $30$ photons and a modest squeezing parameter $r\approx 0.6$, along with a nonlinear microwave resonator charactered by a strength of $λ\approx -1.2 χ_s$, a readout fidelity of $98\%$ can be attained within a readout time of around $0.6\:μ\mbox{s}$. Intriguing, by using a positive nonlinear strength of $λ\approx 1.2χ_s$, it is possible to achieve an SNR of approximately $6$ and a readout fidelity of $99.99\%$ at a slightly later time, around $0.9\:μ\mbox{s}$, while maintaining all other parameters at the same settings.

arXiv:2401.03617•Jan 8, 2024•0 citations

Sub-microsecond high-fidelity dispersive readout of a spin qubit with squeezed photons

Chon‐Fai Kam, Xuedong Hu

Fast and high-fidelity qubit measurement is essential for realizing quantum error correction, which is in turn a key ingredient to universal quantum computing. For electron spin qubits, fast readout is one of the significant road blocks toward error correction. Here we examine the dispersive readout of a single spin in a semiconductor double quantum dot coupled to a microwave resonator. We show that using displaced squeezed vacuum states for the probing photons can improve the qubit readout fidelity and speed. Under condition of proper phase matching, we find that a moderate, and only moderate, squeezing can enhance both the signal-to-noise ratio and the fidelity of the qubit-state readout, and the optimal readout time can be shortened to the sub-microsecond range with above $99\%$ fidelity. These enhancements are achieved at low probing microwave intensity, ensuring non-demolition qubit measurement.

arXiv:2312.10820•Dec 17, 2023•0 citations

Simultaneous high-fidelity readout and strong coupling in a donor-based spin qubit

Si Yan Koh, Weifan Wu, Kelvin Onggadinata +7 more

Superconducting resonators coupled to solid-state qubits offer a scalable architecture for long-range entangling operations and fast, high-fidelity readout. Realizing this requires low photon-loss rates and qubits with tunable electric dipole moments that couple strongly to the resonator's electric field while maintaining long coherence times. For spin qubits, spin-photon coupling is typically achieved via spin-charge hybridization. However, this introduces a fundamental trade-off: a large spin-charge admixture enhances the coupling strength, which boosts readout and resonator-mediated gate speeds, but exposes the qubit to increased decoherence, thereby increasing the threshold required for strong coupling and limiting the time available for accurate state measurement. This makes it essential to identify optimal operating points for each qubit platform. We address this for the donor-based flip-flop qubit, whose microwave-controllable electron-nuclear spin states make it suitable for coupling to microwave resonators. We demonstrate that, by choosing intermediate tunnel couplings that balance strong interaction with long qubit lifetimes, high-fidelity readout and strong coupling are simultaneously achievable. We also map out the respective charge-photon couplings and photon-loss rates required. Furthermore, we show that experimental constraints on charge-photon coupling and photon loss can be mitigated using squeezed input fields. As similar trade-offs appear in quantum-dot-based qubits, our methods and insights extend naturally to these platforms, offering a potential route toward scalable architectures.

arXiv:2602.12248•Physical review. B./Physical review. B•Apr 22, 2026•0 citations

Coupling a single electron spin to a microwave resonator: controlling transverse and longitudinal couplings

Félix Beaudoin, Dany Lachance-Quirion, W. A. Coish +1 more

Microwave-frequency superconducting resonators are ideally suited to perform dispersive qubit readout, to mediate two-qubit gates, and to shuttle states between distant quantum systems. A prerequisite for these applications is a strong qubit-resonator coupling. Strong coupling between an electron-spin qubit and a microwave resonator can be achieved by correlating spin- and orbital degrees of freedom. This correlation can be achieved through the Zeeman coupling of a single electron in a double quantum dot to a spatially inhomogeneous magnetic field generated by a nearby nanomagnet. In this paper, we consider such a device and estimate spin-resonator couplings of order ∼1 MHz with realistic parameters. Further, through realistic simulations, we show that precise placement of the double-dot relative to the nanomagnet allows to select between a purely longitudinal coupling (commuting with the bare spin Hamiltonian) and a purely transverse (spin non-conserving) coupling. Additionally, we suggest methods to mitigate dephasing and relaxation channels that are introduced in this coupling scheme. This analysis gives a clear route toward the realization of coherent state transfer between a microwave resonator and a single electron spin in a GaAs double quantum dot with a fidelity above 90%. Improved dynamical decoupling sequences, low-noise environments, and longer-lived microwave cavity modes may lead to substantially higher fidelities in the near future.

arXiv:1606.04736•Nanotechnology•Oct 17, 2016•65 citations

Enhancing Dispersive Readout of Superconducting Qubits through Dynamic Control of the Dispersive Shift: Experiment and Theory

François Swiadek, Ross Shillito, Paul Magnard +9 more

The performance of a wide range of quantum computing algorithms and protocols depends critically on the fidelity and speed of the employed qubit readout. Examples include gate sequences benefiting from midcircuit real-time measurement-based feedback, such as qubit initialization, entanglement generation, teleportation, and, perhaps most importantly, quantum error correction. A prominent and widely used readout approach is based on the dispersive interaction of a superconducting qubit strongly coupled to a large-bandwidth readout resonator, frequently combined with a dedicated or shared Purcell filter protecting qubits from decay. By dynamically reducing the qubit-resonator detuning and thus increasing the dispersive shift, we demonstrate a beyond-state-of-the-art two-state-readout error of only 0.25% in 100-ns integration time. Maintaining low-readout-drive strength, we nearly quadruple the signal-to-noise ratio of the readout by doubling the readout-mode line width, which we quantify by considering the hybridization of the readout resonator and its dedicated Purcell filter. We find excellent agreement between our experimental data and our theoretical model. The presented results are expected to further boost the performance of new and existing algorithms and protocols critically depending on high-fidelity fast midcircuit measurements. Published by the American Physical Society 2024

arXiv:2307.07765•PRX Quantum•Nov 20, 2024•52 citations
Strong coupling of semiconductor spin qubits to superconducting microwave resonators was recently demonstrated [X. Mi et al., Nature 555, 599 (2018); A. J. Landig et al., Nature 560, 179 (2018); N. Samkharadze et al., Science 359, 1123 (2018); T. Cubaynes et al., NPJ Quant. Inf. 5, 47 (2019)]. These breakthroughs pave the way for quantum information processing that combines the long coherence times of solid-state spin qubits with the long-distance connectivity, fast control, and fast high-fidelity quantum-non-demolition readout of existing superconducting qubit implementations. Here we theoretically analyze and optimize the dispersive readout of a single spin in a semiconductor double quantum dot (DQD) coupled to a microwave resonator via its electric dipole moment. The strong spin-photon coupling arises from the motion of the electron spin in a local magnetic field gradient. We calculate the signal-to-noise ratio (SNR) of the readout accounting for both Purcell spin relaxation and spin relaxation arising from intrinsic electric noise within the semiconductor. We express the maximum achievable SNR in terms of the cooperativity associated with these two dissipation processes. We find that while the cooperativity increases with the strength of the dipole coupling between the DQD and the resonator, it does not depend on the strength of the magnetic field gradient. We then optimize the SNR as a function of experimentally tunable DQD parameters. We identify wide regions of parameter space where the unwanted backaction of the resonator photons on the qubit is small. Moreover, we find that the coupling of the resonator to other DQD transitions can enhance the SNR by at least a factor of two, a ``straddling'' effect [J. Koch et al., Phys. Rev. A 76, 042319 (2007)] that occurs only at nonzero energy detuning of the DQD double-well potential. We estimate that with current technology, single-shot readout fidelities in the range 82--95% can be achieved within a few \ensuremathμs\ensuremath{\mu}\mathrm{s}\ensuremathμs of readout time without requiring the use of Purcell filters.
Abstract Fast and high-fidelity qubit measurement is crucial for achieving quantum error correction, a fundamental element in the development of universal quantum computing. For electron spin qubits, fast readout stands out as a major obstacle in the pursuit of error correction. In this work, we explore the dispersive measurement of an individual spin in a semiconductor double quantum dot coupled to a nonlinear microwave resonator. By utilizing displaced squeezed vacuum states, we achieve rapid and high-fidelity readout for semiconductor spin qubits. Our findings reveal that introducing modest squeezing and mild nonlinearity can significantly improve both the signal-to-noise ratio (SNR) and the fidelity of qubit-state readout. By properly marching the phases of squeezing, the nonlinear strength, and the local oscillator, the optimal readout time can be reduced to the sub-microsecond range. With current technology parameters (κ≈2χs\kappa\approx 2\chi_sκ≈2χs​, $\chi_s/(2\pi)\approx 0.15 \:\mbox{MHz}$), utilizing a displaced squeezed vacuum state with 303030 photons and a modest squeezing parameter r≈0.6r\approx 0.6r≈0.6, along with a nonlinear microwave resonator charactered by a strength of λ≈−1.2χs\lambda\approx -1.2 \chi_sλ≈−1.2χs​, a readout fidelity of 98%98\%98% can be attained within a readout time of around $0.6\:\mu\mbox{s}$. Intriguing, by using a positive nonlinear strength of λ≈1.2χs\lambda\approx 1.2\chi_sλ≈1.2χs​, it is possible to achieve an SNR of approximately 666 and a readout fidelity of 99.99%99.99\%99.99% at a slightly later time, around $0.9\:\mu\mbox{s}$, while maintaining all other parameters at the same settings.
Fast and high-fidelity qubit measurement is crucial for achieving quantum error correction, a fundamental element in the development of universal quantum computing. For electron spin qubits, fast readout stands out as a major obstacle in the pursuit of error correction. In this work, we explore the dispersive measurement of an individual spin in a semiconductor double quantum dot coupled to a nonlinear microwave resonator. By utilizing displaced squeezed vacuum states, we achieve rapid and high-fidelity readout for semiconductor spin qubits. Our findings reveal that introducing modest squeezing and mild nonlinearity can significantly improve both the signal-to-noise ratio (SNR) and the fidelity of qubit-state readout. By properly marching the phases of squeezing, the nonlinear strength, and the local oscillator, the optimal readout time can be reduced to the sub-microsecond range. With current technology parameters (κ≈2χsκ\approx 2χ_sκ≈2χs​, $χ_s\approx 2π\times 0.15 \:\mbox{MHz}$), utilizing a displaced squeezed vacuum state with 303030 photons and a modest squeezing parameter r≈0.6r\approx 0.6r≈0.6, along with a nonlinear microwave resonator charactered by a strength of λ≈−1.2χsλ\approx -1.2 χ_sλ≈−1.2χs​, a readout fidelity of 98%98\%98% can be attained within a readout time of around $0.6\:μ\mbox{s}$. Intriguing, by using a positive nonlinear strength of λ≈1.2χsλ\approx 1.2χ_sλ≈1.2χs​, it is possible to achieve an SNR of approximately 666 and a readout fidelity of 99.99%99.99\%99.99% at a slightly later time, around $0.9\:μ\mbox{s}$, while maintaining all other parameters at the same settings.
Fast and high-fidelity qubit measurement is essential for realizing quantum error correction, which is in turn a key ingredient to universal quantum computing. For electron spin qubits, fast readout is one of the significant road blocks toward error correction. Here we examine the dispersive readout of a single spin in a semiconductor double quantum dot coupled to a microwave resonator. We show that using displaced squeezed vacuum states for the probing photons can improve the qubit readout fidelity and speed. Under condition of proper phase matching, we find that a moderate, and only moderate, squeezing can enhance both the signal-to-noise ratio and the fidelity of the qubit-state readout, and the optimal readout time can be shortened to the sub-microsecond range with above 99%99\%99% fidelity. These enhancements are achieved at low probing microwave intensity, ensuring non-demolition qubit measurement.
Superconducting resonators coupled to solid-state qubits offer a scalable architecture for long-range entangling operations and fast, high-fidelity readout. Realizing this requires low photon-loss rates and qubits with tunable electric dipole moments that couple strongly to the resonator's electric field while maintaining long coherence times. For spin qubits, spin-photon coupling is typically achieved via spin-charge hybridization. However, this introduces a fundamental trade-off: a large spin-charge admixture enhances the coupling strength, which boosts readout and resonator-mediated gate speeds, but exposes the qubit to increased decoherence, thereby increasing the threshold required for strong coupling and limiting the time available for accurate state measurement. This makes it essential to identify optimal operating points for each qubit platform. We address this for the donor-based flip-flop qubit, whose microwave-controllable electron-nuclear spin states make it suitable for coupling to microwave resonators. We demonstrate that, by choosing intermediate tunnel couplings that balance strong interaction with long qubit lifetimes, high-fidelity readout and strong coupling are simultaneously achievable. We also map out the respective charge-photon couplings and photon-loss rates required. Furthermore, we show that experimental constraints on charge-photon coupling and photon loss can be mitigated using squeezed input fields. As similar trade-offs appear in quantum-dot-based qubits, our methods and insights extend naturally to these platforms, offering a potential route toward scalable architectures.
Microwave-frequency superconducting resonators are ideally suited to perform dispersive qubit readout, to mediate two-qubit gates, and to shuttle states between distant quantum systems. A prerequisite for these applications is a strong qubit-resonator coupling. Strong coupling between an electron-spin qubit and a microwave resonator can be achieved by correlating spin- and orbital degrees of freedom. This correlation can be achieved through the Zeeman coupling of a single electron in a double quantum dot to a spatially inhomogeneous magnetic field generated by a nearby nanomagnet. In this paper, we consider such a device and estimate spin-resonator couplings of order ∼1 MHz with realistic parameters. Further, through realistic simulations, we show that precise placement of the double-dot relative to the nanomagnet allows to select between a purely longitudinal coupling (commuting with the bare spin Hamiltonian) and a purely transverse (spin non-conserving) coupling. Additionally, we suggest methods to mitigate dephasing and relaxation channels that are introduced in this coupling scheme. This analysis gives a clear route toward the realization of coherent state transfer between a microwave resonator and a single electron spin in a GaAs double quantum dot with a fidelity above 90%. Improved dynamical decoupling sequences, low-noise environments, and longer-lived microwave cavity modes may lead to substantially higher fidelities in the near future.
The performance of a wide range of quantum computing algorithms and protocols depends critically on the fidelity and speed of the employed qubit readout. Examples include gate sequences benefiting from midcircuit real-time measurement-based feedback, such as qubit initialization, entanglement generation, teleportation, and, perhaps most importantly, quantum error correction. A prominent and widely used readout approach is based on the dispersive interaction of a superconducting qubit strongly coupled to a large-bandwidth readout resonator, frequently combined with a dedicated or shared Purcell filter protecting qubits from decay. By dynamically reducing the qubit-resonator detuning and thus increasing the dispersive shift, we demonstrate a beyond-state-of-the-art two-state-readout error of only 0.25% in 100-ns integration time. Maintaining low-readout-drive strength, we nearly quadruple the signal-to-noise ratio of the readout by doubling the readout-mode line width, which we quantify by considering the hybridization of the readout resonator and its dedicated Purcell filter. We find excellent agreement between our experimental data and our theoretical model. The presented results are expected to further boost the performance of new and existing algorithms and protocols critically depending on high-fidelity fast midcircuit measurements. Published by the American Physical Society 2024