Enhancing Dispersive Readout of Superconducting Qubits through Dynamic Control of the Dispersive Shift: Experiment and Theory
François Swiadek, Ross Shillito, Paul Magnard, Ants Remm, Christoph Hellings, Nathan Lacroix, Quentin Ficheux, Dante Colao Zanuz, Graham J. Norris, Alexandre Blais, Sebastian Krinner, Andreas J. Wallraff
The performance of a wide range of quantum computing algorithms and protocols depends critically on the fidelity and speed of the employed qubit readout. Examples include gate sequences benefiting from midcircuit real-time measurement-based feedback, such as qubit initialization, entanglement generation, teleportation, and, perhaps most importantly, quantum error correction. A prominent and widely used readout approach is based on the dispersive interaction of a superconducting qubit strongly coupled to a large-bandwidth readout resonator, frequently combined with a dedicated or shared Purcell filter protecting qubits from decay. By dynamically reducing the qubit-resonator detuning and thus increasing the dispersive shift, we demonstrate a beyond-state-of-the-art two-state-readout error of only 0.25% in 100-ns integration time. Maintaining low-readout-drive strength, we nearly quadruple the signal-to-noise ratio of the readout by doubling the readout-mode line width, which we quantify by considering the hybridization of the readout resonator and its dedicated Purcell filter. We find excellent agreement between our experimental data and our theoretical model. The presented results are expected to further boost the performance of new and existing algorithms and protocols critically depending on high-fidelity fast midcircuit measurements. Published by the American Physical Society 2024
The performance of a wide range of quantum computing algorithms and protocols depends critically on the fidelity and speed of the employed qubit readout. Examples include gate sequences benefiting from midcircuit real-time measurement-based feedback, such as qubit initialization, entanglement generation, teleportation, and, perhaps most importantly, quantum error correction. A prominent and widely used readout approach is based on the dispersive interaction of a superconducting qubit strongly coupled to a large-bandwidth readout resonator, frequently combined with a dedicated or shared Purcell filter protecting qubits from decay. By dynamically reducing the qubit-resonator detuning and thus increasing the dispersive shift, we demonstrate a beyond-state-of-the-art two-state-readout error of only 0.25% in 100-ns integration time. Maintaining low-readout-drive strength, we nearly quadruple the signal-to-noise ratio of the readout by doubling the readout-mode line width, which we quantify by considering the hybridization of the readout resonator and its dedicated Purcell filter. We find excellent agreement between our experimental data and our theoretical model. The presented results are expected to further boost the performance of new and existing algorithms and protocols critically depending on high-fidelity fast midcircuit measurements. Published by the American Physical Society 2024
Residual noise photons in a readout resonator become a major source of dephasing for a superconducting qubit when the resonator is optimized for a fast, high-fidelity dispersive readout. Here, we propose and demonstrate a nonlinear Purcell filter that suppresses such an undesirable dephasing process without sacrificing the readout performance. When a readout pulse is applied, the filter automatically reduces the effective linewidth of the readout resonator, increasing the sensitivity of the qubit to the input field. The noise tolerance of the device we have fabricated is shown to be enhanced by a factor of 3 relative to a device with a linear filter. The measurement rate is enhanced by another factor of 3 by utilizing the bifurcation of the nonlinear filter. A readout fidelity of 99.4% and a quantum nondemolition fidelity of 99.2% are achieved using a 40-ns readout pulse. The nonlinear Purcell filter will be an effective tool for realizing a fast, high-fidelity readout without compromising the coherence time of the qubit. Published by the American Physical Society 2024
Fast and accurate qubit measurement remains a critical challenge on the path to fault-tolerant quantum computing. In superconducting quantum circuits, fast qubit measurement has been achieved using a dispersively coupled resonator with a large externally limited linewidth. This necessitates the use of a Purcell filter that protects the qubit from relaxation through the readout channel. Here, we show that a readout resonator and filter resonator, coupled to each other both capacitively and inductively via a multiconductor transmission line, can produce a compact notch-filter circuit that effectively eliminates the Purcell decay channel through destructive interference. By utilizing linewidths as large as 42 MHz, we perform simultaneous readout of four qubits using a 56-ns integration window and benchmark an average assignment fidelity of 99.77%, with the highest qubit assignment fidelity exceeding 99.9%. Including the simulated readout ring-down time, the total readout duration was between 115 and 215 ns for the four qubits, which we anticipate can be reduced to around 100 ns with active ring-down pulse shaping. These results demonstrate a significant advancement in speed and fidelity for multiplexed superconducting-qubit readout.
Fast, high-fidelity, and low back-action readout plays a crucial role in the advancement of quantum error correction (QEC). Here, we demonstrate high-performance multiplexed readout of superconducting qubits using a tunable broadband Purcell filter, effectively resolving the fundamental trade-off between measurement speed and photon-noise-induced dephasing. By dynamically tuning the filter parameters, we suppress photon-noise-induced dephasing by a factor of 7 in idle status, while enabling rapid, high-fidelity readout in measurement status. We achieve 99.6\% single-shot readout fidelity with 100~ns readout pulse, limited primarily by relaxation errors during readout. Using a multilevel readout protocol, we further attain 99.9\% fidelity in 50~ns. Simultaneous readout of three qubits using 100~ns pulses achieves an average fidelity of 99.5\% with low crosstalk. Additionally, the readout exhibits high quantum-nondemolition (QND) performance: 99.4\% fidelity over repeated measurements and a low leakage rate below 0.1\%. Building on the tunable broadband filter, we further propose a scalable readout scheme for surface code QEC with enhanced multiplexing capability, offering a promising solution for fast and scalable QEC.
The ability to perform rapid, high fidelity readout of a qubit state is an important requirement for quantum algorithms and, in particular, for enabling operations such as mid-circuit measurements and measurement-based feedback for error correction schemes on large quantum processors. The growing interest in fluxonium qubits, due to their long coherence times and high anharmonicity, merits further attention to reducing the readout duration and measurement errors. We find that this can be accomplished by exploiting the flux tunability of fluxonium qubits. In this work, we experimentally demonstrate flux-pulse-assisted readout, as proposed in Phys. Rev. Applied 22, 014079 (https://doi.org/10.1103/PhysRevApplied.22.014079), in a setup without a quantum-limited parametric amplifier. Increasing the dispersive shift magnitude by almost 20% through flux pulsing, we achieve an assignment fidelity of 94.3% with an integration time of 280 ns. The readout performance is limited by state initialization, but we find that the limit imposed only by the signal-to-noise ratio corresponds to an assignment fidelity of 99.9% with a 360 ns integration time. We also verify these results through simple semi-classical simulations. These results constitute the fastest reported readout of a fluxonium qubit, with the prospect of further improvement by incorporation of a parametric amplifier in the readout chain to enhance measurement efficiency.
Designing quantum systems with the measurement speed and accuracy needed for quantum error correction using superconducting qubits requires iterative design and testing informed by accurate models and characterization tools. We introduce a single protocol, with few prerequisite calibrations, to measure the dispersive shift, resonator linewidth, and drive power used in the dispersive readout of superconducting qubits. We find that the resonator linewidth is poorly controlled, with a factor of 2 variation between the maximum and minimum measured values, and this variation is likely to require focused attention in future quantum error correction experiments. We also introduce a protocol for measuring the efficiency of the readout system using the same power levels as are used in typical qubit readout, and without the need to measure the qubit dephasing. We routinely run these protocols on chips with tens of qubits to a hundred qubits, driven by automation software with little human interaction. Using the extracted system parameters, we find that a model based on these parameters predicts the readout signal-to-noise ratio to within 10% over a device with 54 qubits.
In circuit quantum electrodynamics, qubits are typically measured using dispersively coupled readout resonators. Coupling between each readout resonator and its electrical environment, however, reduces the qubit lifetime via the Purcell effect. Inserting a Purcell filter counters this effect while maintaining high readout fidelity but reduces measurement bandwidth and, thus, limits multiplexing readout capacity. In this Letter, we develop and implement a multi-stage bandpass Purcell filter that yields better qubit protection while simultaneously increasing measurement bandwidth and multiplexed capacity. We report on the experimental performance of our transmission-line-based implementation of this approach, a flexible design that can easily be integrated with current scaled-up, long coherence time superconducting quantum processors.