Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2411.13437

Improved fluxonium readout through dynamic flux pulsing

Taryn V. Stefanski, Yilmaz, Figen, Eugene Y. Huang, Martijn F. S. Zwanenburg, Siddharth Singh, Siyu Wang, Lukas Johannes Splitthoff, Christian Kraglund Andersen

Published Nov 20, 2024• 1 citation
arXivHTMLPDF

Abstract

The ability to perform rapid, high fidelity readout of a qubit state is an important requirement for quantum algorithms and, in particular, for enabling operations such as mid-circuit measurements and measurement-based feedback for error correction schemes on large quantum processors. The growing interest in fluxonium qubits, due to their long coherence times and high anharmonicity, merits further attention to reducing the readout duration and measurement errors. We find that this can be accomplished by exploiting the flux tunability of fluxonium qubits. In this work, we experimentally demonstrate flux-pulse-assisted readout, as proposed in Phys. Rev. Applied 22, 014079 (https://doi.org/10.1103/PhysRevApplied.22.014079), in a setup without a quantum-limited parametric amplifier. Increasing the dispersive shift magnitude by almost 20% through flux pulsing, we achieve an assignment fidelity of 94.3% with an integration time of 280 ns. The readout performance is limited by state initialization, but we find that the limit imposed only by the signal-to-noise ratio corresponds to an assignment fidelity of 99.9% with a 360 ns integration time. We also verify these results through simple semi-classical simulations. These results constitute the fastest reported readout of a fluxonium qubit, with the prospect of further improvement by incorporation of a parametric amplifier in the readout chain to enhance measurement efficiency.

DOI
10.48550/arxiv.2411.13437

Related papers

Experimental demonstration of flux-pulse-assisted readout on fluxonium qubits

Taryn V. Stefanski, Figen YILMAZ, Martijn F. S. Zwanenburg +4 more

In the pursuit of large-scale, fault-tolerant quantum computation, various superconducting architectures have been investigated as the potential building blocks for these systems. With the need for fast operations with low error rates, fluxonium qubits have recently gained an increasing amount of attention. The fluxonium qubit offers numerous advantages including a large anharmonicity, long coherence times, protection against flux noise, and resilience against dielectric loss. In an effort to maximize the potential of these devices, we employ flux-pulse-assisted readout to increase the signal to noise ratio and, thus, minimize the readout time required. This readout scheme capitalizes on the high dispersive shift afforded by avoided crossings between the readout resonator and higher order fluxonium transitions. We present experimental results in which we display an advantage of flux-pulse-assisted readout over static readout at the so-called "sweet-spot" on multiple fluxonium qubits.

•Jan 1, 2024•0 citations

Flux-pulse-assisted readout of a fluxonium qubit

Taryn V. Stefanski, Christian Kraglund Andersen

Much attention has focused on the transmon architecture for large-scale superconducting quantum devices; however, the fluxonium qubit has emerged as a possible successor. With a shunting inductor in parallel to a Josephson junction, the fluxonium offers larger anharmonicity and stronger protection against dielectric loss, leading to higher coherence times as compared to conventional transmon qubits. The interplay between the inductive and Josephson energy potentials of the fluxonium qubit leads to a rich dispersive-shift landscape when tuning the external flux. Here, we propose to exploit the features in the dispersive shift to improve qubit readout. Specifically, we report on theoretical simulations showing improved readout times and error rates by performing the readout at a flux-bias point with large dispersive shift. We expand the scheme to include different error channels and show that with an integration time of 155 ns, flux-pulse-assisted readout offers about a 5 -times improvement in the signal-to-noise ratio. Moreover, we show that the performance improvement persists in the presence of finite measurement efficiency combined with quasistatic flux noise and also when considering the increased Purcell rate at the flux-pulse-assisted readout point. We suggest a set of reasonable energy parameters for the fluxonium architecture that will allow for the implementation of our proposed flux-pulse-assisted readout scheme.

arXiv:2309.17286•Physical Review Applied•Jul 30, 2024•8 citations

Optimized Readout of a Fluxonium Qubit

Taryn V. Stefanski, S. K. Singh, Figen YILMAZ +2 more

Much attention has focused on the transmon architecture for large-scale quantum devices, however, the fluxonium qubit has emerged as a possible successor. With an additional shunting inductor in parallel, the fluxonium offers larger anharmonicity and stronger protection against dialectric loss, leading to higher coherence times. The extra inductive element of the fluxonium qubit leads to a rich dispersive shift landscape when tuning the external flux. Here we propose to exploit the features in the dispersive shift to improve qubit readout using fast flux pulsing. Specifically, we report on theoretical simulations showing improved readout times and error rates by performing the readout at a flux bias point with large dispersive shift. We suggest optimal energy parameters for the fluxonium architecture that will allow for the implementation of our proposed readout scheme.

•Jan 1, 2023•0 citations

High-fidelity QND readout and measurement back-action in a tantalum-based high-coherence fluxonium qubit

Gaurav Bothara, Srijita Das, Kishor V. Salunkhe +4 more

Implementing a precise measurement of the quantum state of a qubit is critical for building a practical quantum processor, as it plays an important role in state initialization and quantum error correction. While the transmon qubit has been the most commonly used design in small- to medium-scale processors, the fluxonium qubit is emerging as a strong alternative with the potential for high-fidelity gate operation as a result of the high anharmonicity and high coherence achievable due to its unique design. Here, we explore the measurement characteristics of a tantalum-based high-coherence fluxonium qubit and demonstrate single-shot measurement fidelity (assignment fidelity) of 96.2% ± 0.5% and 97.8% ± 0.4% without and with the use of a Josephson parametric amplifier, respectively. We study the back-action of the measurement photons on the qubit and measure a QND fidelity of 99.0% ± 0.3%. We find that the measurement fidelity and the QND nature are limited by state-mixing errors, and our results suggest that a careful study of measurement-induced transitions in the fluxonium is needed to further optimize the readout performance.

APL Quantum•Apr 9, 2025•5 citations

High-fidelity QND readout and measurement back-action in a Tantalum-based high-coherence fluxonium qubit

Gaurav Bothara, Das, Srijita, Kishor V. Salunkhe +4 more

Implementing a precise measurement of the quantum state of a qubit is very critical for building a practical quantum processor as it plays an important role in state initialization and quantum error correction. While the transmon qubit has been the most commonly used design in small to medium-scale processors, the fluxonium qubit is emerging as a strong alternative with the potential for high-fidelity gate operation as a result of the high anharmonicity and high coherence achievable due to its unique design. Here, we explore the measurement characteristics of a tantalum-based high-coherence fluxonium qubit and demonstrate single-shot measurement fidelity (assignment fidelity) of 96.2% and 97.8% without and with the use of a Josephson Parametric Amplifier respectively. We study the back-action of the measurement photons on the qubit and measure a QND (repeatability) fidelity of 99.6%. We find that the measurement fidelity and QND nature are limited by state-mixing errors and our results suggest that a careful study of measurement-induced transitions in the fluxonium is needed to further optimize the readout performance.

arXiv:2501.16691•Jan 28, 2025•0 citations

Mitigating state-transition errors during readout with a synchronized flux pulse

Yulong Li, Wuerkaixi Nuerbolati, Chunqing Deng +3 more

State transitions during qubit measurements are extremely detrimental to quantum tasks that rely on repeated measurements, such as quantum error correction. These state transitions can occur when excessive measurement power leads to qubit excitations outside its computational space. Alternatively, the qubit state can decay rapidly when the measurement protocol inadvertently couples the qubit to lossy modes such as two-level systems (TLSs). We experimentally verify the impact of these TLSs in qubit readout by measuring the transition errors at different qubit flux bias. Because such state transitions during measurements are often localized in frequency space, we demonstrate the ability to avoid them during a fluxonium readout by exploiting the qubit's flux-tunability. By synchronizing the flux bias with the readout photon dynamics, we obtain an optimal readout fidelity of 99 % (98.4 %) in 1 us (0.5 us) integration time. Our work advances the understanding of state transitions in superconducting circuit measurements and demonstrates the potential of fluxonium qubits to achieve fast high-fidelity readout.

arXiv:2507.14436•Physical Review Applied•Apr 21, 2026•1 citation
The ability to perform rapid, high fidelity readout of a qubit state is an important requirement for quantum algorithms and, in particular, for enabling operations such as mid-circuit measurements and measurement-based feedback for error correction schemes on large quantum processors. The growing interest in fluxonium qubits, due to their long coherence times and high anharmonicity, merits further attention to reducing the readout duration and measurement errors. We find that this can be accomplished by exploiting the flux tunability of fluxonium qubits. In this work, we experimentally demonstrate flux-pulse-assisted readout, as proposed in Phys. Rev. Applied 22, 014079 (https://doi.org/10.1103/PhysRevApplied.22.014079), in a setup without a quantum-limited parametric amplifier. Increasing the dispersive shift magnitude by almost 20% through flux pulsing, we achieve an assignment fidelity of 94.3% with an integration time of 280 ns. The readout performance is limited by state initialization, but we find that the limit imposed only by the signal-to-noise ratio corresponds to an assignment fidelity of 99.9% with a 360 ns integration time. We also verify these results through simple semi-classical simulations. These results constitute the fastest reported readout of a fluxonium qubit, with the prospect of further improvement by incorporation of a parametric amplifier in the readout chain to enhance measurement efficiency.
In the pursuit of large-scale, fault-tolerant quantum computation, various superconducting architectures have been investigated as the potential building blocks for these systems. With the need for fast operations with low error rates, fluxonium qubits have recently gained an increasing amount of attention. The fluxonium qubit offers numerous advantages including a large anharmonicity, long coherence times, protection against flux noise, and resilience against dielectric loss. In an effort to maximize the potential of these devices, we employ flux-pulse-assisted readout to increase the signal to noise ratio and, thus, minimize the readout time required. This readout scheme capitalizes on the high dispersive shift afforded by avoided crossings between the readout resonator and higher order fluxonium transitions. We present experimental results in which we display an advantage of flux-pulse-assisted readout over static readout at the so-called "sweet-spot" on multiple fluxonium qubits.
Much attention has focused on the transmon architecture for large-scale superconducting quantum devices; however, the fluxonium qubit has emerged as a possible successor. With a shunting inductor in parallel to a Josephson junction, the fluxonium offers larger anharmonicity and stronger protection against dielectric loss, leading to higher coherence times as compared to conventional transmon qubits. The interplay between the inductive and Josephson energy potentials of the fluxonium qubit leads to a rich dispersive-shift landscape when tuning the external flux. Here, we propose to exploit the features in the dispersive shift to improve qubit readout. Specifically, we report on theoretical simulations showing improved readout times and error rates by performing the readout at a flux-bias point with large dispersive shift. We expand the scheme to include different error channels and show that with an integration time of 155 ns, flux-pulse-assisted readout offers about a 5 -times improvement in the signal-to-noise ratio. Moreover, we show that the performance improvement persists in the presence of finite measurement efficiency combined with quasistatic flux noise and also when considering the increased Purcell rate at the flux-pulse-assisted readout point. We suggest a set of reasonable energy parameters for the fluxonium architecture that will allow for the implementation of our proposed flux-pulse-assisted readout scheme.
Much attention has focused on the transmon architecture for large-scale quantum devices, however, the fluxonium qubit has emerged as a possible successor. With an additional shunting inductor in parallel, the fluxonium offers larger anharmonicity and stronger protection against dialectric loss, leading to higher coherence times. The extra inductive element of the fluxonium qubit leads to a rich dispersive shift landscape when tuning the external flux. Here we propose to exploit the features in the dispersive shift to improve qubit readout using fast flux pulsing. Specifically, we report on theoretical simulations showing improved readout times and error rates by performing the readout at a flux bias point with large dispersive shift. We suggest optimal energy parameters for the fluxonium architecture that will allow for the implementation of our proposed readout scheme.
Implementing a precise measurement of the quantum state of a qubit is critical for building a practical quantum processor, as it plays an important role in state initialization and quantum error correction. While the transmon qubit has been the most commonly used design in small- to medium-scale processors, the fluxonium qubit is emerging as a strong alternative with the potential for high-fidelity gate operation as a result of the high anharmonicity and high coherence achievable due to its unique design. Here, we explore the measurement characteristics of a tantalum-based high-coherence fluxonium qubit and demonstrate single-shot measurement fidelity (assignment fidelity) of 96.2% ± 0.5% and 97.8% ± 0.4% without and with the use of a Josephson parametric amplifier, respectively. We study the back-action of the measurement photons on the qubit and measure a QND fidelity of 99.0% ± 0.3%. We find that the measurement fidelity and the QND nature are limited by state-mixing errors, and our results suggest that a careful study of measurement-induced transitions in the fluxonium is needed to further optimize the readout performance.
Implementing a precise measurement of the quantum state of a qubit is very critical for building a practical quantum processor as it plays an important role in state initialization and quantum error correction. While the transmon qubit has been the most commonly used design in small to medium-scale processors, the fluxonium qubit is emerging as a strong alternative with the potential for high-fidelity gate operation as a result of the high anharmonicity and high coherence achievable due to its unique design. Here, we explore the measurement characteristics of a tantalum-based high-coherence fluxonium qubit and demonstrate single-shot measurement fidelity (assignment fidelity) of 96.2% and 97.8% without and with the use of a Josephson Parametric Amplifier respectively. We study the back-action of the measurement photons on the qubit and measure a QND (repeatability) fidelity of 99.6%. We find that the measurement fidelity and QND nature are limited by state-mixing errors and our results suggest that a careful study of measurement-induced transitions in the fluxonium is needed to further optimize the readout performance.
State transitions during qubit measurements are extremely detrimental to quantum tasks that rely on repeated measurements, such as quantum error correction. These state transitions can occur when excessive measurement power leads to qubit excitations outside its computational space. Alternatively, the qubit state can decay rapidly when the measurement protocol inadvertently couples the qubit to lossy modes such as two-level systems (TLSs). We experimentally verify the impact of these TLSs in qubit readout by measuring the transition errors at different qubit flux bias. Because such state transitions during measurements are often localized in frequency space, we demonstrate the ability to avoid them during a fluxonium readout by exploiting the qubit's flux-tunability. By synchronizing the flux bias with the readout photon dynamics, we obtain an optimal readout fidelity of 99 % (98.4 %) in 1 us (0.5 us) integration time. Our work advances the understanding of state transitions in superconducting circuit measurements and demonstrates the potential of fluxonium qubits to achieve fast high-fidelity readout.