In the pursuit of large-scale, fault-tolerant quantum computation, various superconducting architectures have been investigated as the potential building blocks for these systems. With the need for fast operations with low error rates, fluxonium qubits have recently gained an increasing amount of attention. The fluxonium qubit offers numerous advantages including a large anharmonicity, long coherence times, protection against flux noise, and resilience against dielectric loss. In an effort to maximize the potential of these devices, we employ flux-pulse-assisted readout to increase the signal to noise ratio and, thus, minimize the readout time required. This readout scheme capitalizes on the high dispersive shift afforded by avoided crossings between the readout resonator and higher order fluxonium transitions. We present experimental results in which we display an advantage of flux-pulse-assisted readout over static readout at the so-called "sweet-spot" on multiple fluxonium qubits.
In the pursuit of large-scale, fault-tolerant quantum computation, various superconducting architectures have been investigated as the potential building blocks for these systems. With the need for fast operations with low error rates, fluxonium qubits have recently gained an increasing amount of attention. The fluxonium qubit offers numerous advantages including a large anharmonicity, long coherence times, protection against flux noise, and resilience against dielectric loss. In an effort to maximize the potential of these devices, we employ flux-pulse-assisted readout to increase the signal to noise ratio and, thus, minimize the readout time required. This readout scheme capitalizes on the high dispersive shift afforded by avoided crossings between the readout resonator and higher order fluxonium transitions. We present experimental results in which we display an advantage of flux-pulse-assisted readout over static readout at the so-called "sweet-spot" on multiple fluxonium qubits.
Much attention has focused on the transmon architecture for large-scale superconducting quantum devices; however, the fluxonium qubit has emerged as a possible successor. With a shunting inductor in parallel to a Josephson junction, the fluxonium offers larger anharmonicity and stronger protection against dielectric loss, leading to higher coherence times as compared to conventional transmon qubits. The interplay between the inductive and Josephson energy potentials of the fluxonium qubit leads to a rich dispersive-shift landscape when tuning the external flux. Here, we propose to exploit the features in the dispersive shift to improve qubit readout. Specifically, we report on theoretical simulations showing improved readout times and error rates by performing the readout at a flux-bias point with large dispersive shift. We expand the scheme to include different error channels and show that with an integration time of 155 ns, flux-pulse-assisted readout offers about a 5 -times improvement in the signal-to-noise ratio. Moreover, we show that the performance improvement persists in the presence of finite measurement efficiency combined with quasistatic flux noise and also when considering the increased Purcell rate at the flux-pulse-assisted readout point. We suggest a set of reasonable energy parameters for the fluxonium architecture that will allow for the implementation of our proposed flux-pulse-assisted readout scheme.
Much attention has focused on the transmon architecture for large-scale quantum devices, however, the fluxonium qubit has emerged as a possible successor. With an additional shunting inductor in parallel, the fluxonium offers larger anharmonicity and stronger protection against dialectric loss, leading to higher coherence times. The extra inductive element of the fluxonium qubit leads to a rich dispersive shift landscape when tuning the external flux. Here we propose to exploit the features in the dispersive shift to improve qubit readout using fast flux pulsing. Specifically, we report on theoretical simulations showing improved readout times and error rates by performing the readout at a flux bias point with large dispersive shift. We suggest optimal energy parameters for the fluxonium architecture that will allow for the implementation of our proposed readout scheme.
The ability to perform rapid, high fidelity readout of a qubit state is an important requirement for quantum algorithms and, in particular, for enabling operations such as mid-circuit measurements and measurement-based feedback for error correction schemes on large quantum processors. The growing interest in fluxonium qubits, due to their long coherence times and high anharmonicity, merits further attention to reducing the readout duration and measurement errors. We find that this can be accomplished by exploiting the flux tunability of fluxonium qubits. In this work, we experimentally demonstrate flux-pulse-assisted readout, as proposed in Phys. Rev. Applied 22, 014079 (https://doi.org/10.1103/PhysRevApplied.22.014079), in a setup without a quantum-limited parametric amplifier. Increasing the dispersive shift magnitude by almost 20% through flux pulsing, we achieve an assignment fidelity of 94.3% with an integration time of 280 ns. The readout performance is limited by state initialization, but we find that the limit imposed only by the signal-to-noise ratio corresponds to an assignment fidelity of 99.9% with a 360 ns integration time. We also verify these results through simple semi-classical simulations. These results constitute the fastest reported readout of a fluxonium qubit, with the prospect of further improvement by incorporation of a parametric amplifier in the readout chain to enhance measurement efficiency.
Dispersive readout is widely used to perform high-fidelity measurement of superconducting qubits. Much work has been focused on the qubit readout fidelity, which depends on the achievable signal-to-noise ratio and the qubit relaxation time. As groups have pushed to increase readout fidelity by increasing readout photon number, dispersive readout has been shown to strongly affect the postmeasurement qubit state. Such effects hinder the effectiveness of quantum error correction, which requires measurements that both have high readout fidelity and are quantum nondemolition (QND). Here, we experimentally investigate non-QND effects in the fluxonium. We map out the state evolution of fluxonium qubits in the presence of resonator photons and observe that these photons induce transitions in the fluxonium both within and outside the qubit subspace. We numerically model our system and find that transitions to higher-excited states and coupling to an external spurious mode are necessary to explain observed non-QND effects.
Superconducting qubits provide a promising path toward building large-scale quantum computers. The simple and robust transmon qubit has been the leading platform, achieving multiple milestones. However, fault-tolerant quantum computing calls for qubit operations at error rates significantly lower than those exhibited in the state of the art. Consequently, alternative superconducting qubits with better error protection have attracted increasing interest. Among them, fluxonium is a particularly promising candidate, featuring large anharmonicity and long coherence times. Here, we engineer a fluxonium-based quantum processor that integrates high qubit coherence, fast frequency tunability, and individual-qubit addressability for reset, readout, and gates. With simple and fast gate schemes, we achieve an average single-qubit gate fidelity of 99.97% and a two-qubit gate fidelity of up to 99.72%. This performance is comparable to the highest values reported in the literature of superconducting circuits. Thus our work, within the realm of superconducting qubits, reveals an alternative qubit platform that is competitive with the transmon system.
In pursuit of superconducting quantum computing, fluxonium qubits have recently garnered attention for their large anharmonicity and high coherence at the sweet spot. Towards the large-scale integration of fluxonium qubits, a major obstacle is the need for precise external magnetic flux bias: To achieve high performance at its sweet spot, each qubit requires a DC bias line. However, such lines inductively coupled to the qubits bring in additional wiring overhead, crosstalk, heating, and decoherence, necessitating measures for mitigating the problems. In this work, we propose a flux-trapping fluxonium qubit, which, by leveraging fluxoid quantization, enables the optimal phase biasing without using external magnetic flux control at the operating temperature. We introduce the design and working principle, and demonstrate the phase biasing achieved through fluxoid quantization.