Rydberg atom-based RF sensors offer distinct advantages over conventional dipole antennas for electric field detection. This paper presents a system model and performance analysis of a Rydberg atom-based quantum radar, which employs optical readout via lasers and photon detectors instead of circuit-based receivers. We derive the signal-to-noise ratio (SNR), compare it with classical radar, and estimate Doppler frequency using an invariant function-based method. Simulations show that the quantum radar achieves higher SNR and lower RMSE in velocity estimation than conventional radar.
Rydberg atom-based RF sensors offer distinct advantages over conventional dipole antennas for electric field detection. This paper presents a system model and performance analysis of a Rydberg atom-based quantum radar, which employs optical readout via lasers and photon detectors instead of circuit-based receivers. We derive the signal-to-noise ratio (SNR), compare it with classical radar, and estimate Doppler frequency using an invariant function-based method. Simulations show that the quantum radar achieves higher SNR and lower RMSE in velocity estimation than conventional radar.
Rydberg atom-based RF sensors offer distinct advantages over conventional dipole antennas for electric field detection. This paper presents a system model and performance analysis of a Rydberg atom-based quantum radar, which employs optical readout via lasers and photon detectors instead of circuit-based receivers. We derive the signal-to-noise ratio (SNR), compare it with classical radar, and estimate Doppler frequency using an invariant function-based method. Simulations show that the quantum radar achieves higher SNR and lower RMSE in velocity estimation than conventional radar.
The significant progress of quantum sensing technologies offer numerous radical solutions for measuring a multitude of physical quantities at an unprecedented precision. Among them, Rydberg atomic quantum receivers (RAQRs) emerge as an eminent solution for detecting the electric field of radio frequency (RF) signals, exhibiting great potential in assisting classical wireless communications and sensing. So far, most experimental studies have aimed for the proof of physical concepts to reveal its promise, while the practical signal model of RAQR-aided wireless communications and sensing remained under-explored. Furthermore, the performance of RAQR-based wireless receivers and their advantages over classical RF receivers have not been fully characterized. To fill these gaps, we introduce the RAQR to the wireless community by presenting an end-to-end reception scheme. We then develop a corresponding equivalent baseband signal model relying on a realistic reception flow. Our scheme and model provide explicit design guidance to RAQR-aided wireless systems. We next study the performance of RAQR-aided wireless systems based on our model, and compare them to classical RF receivers. The results show that Doppler broadening-free RAQRs are capable of achieving a substantial received signal-to-noise ratio (SNR) gain of over 27 decibel (dB) and 40 dB in the photon shot limit and standard quantum limit regimes, respectively.
Quantum Rydberg atom-based radio frequency (RF) sensors exploit the exceptional sensitivity of highly excited atomic states to detect electromagnetic fields with very high precision, offering potential advances in telecommunications, radar and microwave radiometer systems, GNSS-Reflectometers, and electromagnetic compatibility testing. This study presents a detailed MATLAB simulation analysis of radio-frequency sensors modeled as a five-level rubidium-87 (Rb-87) system under the influence of RF and optical fields. The simulation leverages the Lindblad master equation to capture the coherent evolution, the spontaneous emission, the collisional dephasing, and the field-induced ionization. For an external RF electric field of E0 = 100 mV/m, a frequency sweep from 10MHz to 10GHz reveals the impact of noise: an ideal case just limited by quantum noise yields a sensitivity of 0.01 µV/m/ v Hz and a SNR of 177dB, while for E0 = 10 mV/m and a realistic noise (-130 dBm/Hz) the sensitivity worsens to 72 - 633 µV/m/ v Hz and a SNR of 72 dB. The study investigates the effects of RF field amplitude, atom density, and environmental parameters such as residual magnetic field and ambient temperature, in the sensitivity and bandwidth of these promising receivers, offering a framework to optimize Rydberg-based sensing technologies for Earth Observation, Communication and Navigation systems.
Quantum sensing using Rydberg atoms offers unprecedented opportunities for next-generation radar systems, transcending classical limitations in miniaturization and spectral agility. This work proposes a quantum-enhanced radar reception architecture that replaces conventional antenna-tomixer chains with a centimeter-scale vapor cell as a quantum radio frequency (RF) field sensor and mixer, enabling this paradigm for radar sensing. This approach is based on electromagnetically induced transparency, which uses Autler-Townes splitting to enable direct RF-to-optical downconversion within the atomic medium via an external co-frequency reference. To circumvent the range-resolution limitation imposed by the narrow instantaneous response of the atomic receiver, we adopt a stepped-frequency synthesis strategy involving the hybrid manipulation of Rydberg energy states. This strategy combines coarse laser frequency tuning with fine AC-Stark shift compensation. Additionally, we establish a nonlinear response model of the Rydberg atomic homodyne receiver and propose a customized nonlinear compensation method that extends the linear dynamic range by over 7 dB. We developed a compressive sensing-based algorithm (CS-Rydberg) to suppress noise and mitigate the undersampling problem. Experimentally, we demonstrate a compact prototype that achieves centimeter-level ranging precision (RMSE = 1.06 cm) within 1.6–1.9 m. By synthesizing a 1-GHz equivalent bandwidth via sparse stepped-frequency sampling over 2.6–3.6 GHz, we observe resolvable target separations down to 15 cm under controlled sparse scenarios. These results validate the feasibility of quantum sensing based on Rydberg atomic receivers and underscore the architecture’s scalability. By harnessing the atoms’ ultrabroad spectral response, the synthesized bandwidth can extend well beyond the current range. This enables sub-centimeter resolution in future radar systems while preserving quantum traceable calibration and a highly simplified front end.
Rydberg atom electric field sensors are tunable quantum sensors that can perform sensitive radio frequency measurements. Their qualities have piqued interest at longer wavelengths where their small size compares favorably to impedance-matched antennas. Here, we compare the signal detection sensitivity of cm-scale Rydberg sensors to similarly sized room-temperature electrically small antennas with active and passive receiver backends. We present and analyze effective circuit models for each sensor type, facilitating a fair sensitivity comparison for cm-scale sensors. We calculate that contemporary Rydberg sensor implementations are less sensitive than unmatched antennas with active amplification. However, we find that idealized Rydberg sensors operating with a maximized atom number and at the standard quantum limit may perform well beyond the capabilities of antenna-based sensors at room temperature, the sensitivities of both lying below typical atmospheric background noise.
Electromagnetic warfare (EW) refers to military operations exploiting the electromagnetic spectrum, and includes transmitting and receiving information encoded in electromagnetic fields. In order to interpret such information, effective sensing systems are of great importance. For EW applications, the radio frequency (RF) spectrum is specifically relevant. Traditional RF receivers and transmitters rely on antennas and associated electronic components, whose performance is fundamentally limited by constraints imposed by the laws of classical physics. Motivated by the fundamental limitations of classical technologies, quantum technology has emerged as a strategic research area in many countries, with applications in computing, communication and sensing, and could therefore be useful in EW applications in the future. This thesis aims to investigate and compare two quantum sensing approaches: Rydberg atombased electric field sensors and nitrogen-vacancy center magnetometers. The goal is to evaluate their sensing principles, fundamental limitations and potential competitiveness compared to classical RF receivers. The work combines a literature review of published research in order to understand the underlying quantum mechanical principles enabling electromagnetic field sensing, with analytical comparisons of sensitivity and detection range. Classical receiver performance was modeled using thermal-noise-limited sensitivity, while quantum sensor performance was estimated using reported sensitivities from literature. Detection range calculations were performed under simplified assumptions to illustrate the differences between conventional and atom-based sensing approaches. The results show that current quantum sensors do not yet surpass state-of-the-art classical receivers in raw sensitivity. However, they offer several unique characteristics, including intrinsic calibration, wide frequency tunability and the possibility of direct field-based measurements without conventional impedance matching. The comparison further highlights the fundamentally different noise mechanisms governing classical and quantum sensing systems. Overall, quantum sensing represents a promising emerging technology for electromagnetic field detection. Although significant technical challenges remain, continued advances may enable future quantum sensors to complement or partially replace conventional RF sensing technologies.