Electromagnetic warfare (EW) refers to military operations exploiting the electromagnetic spectrum, and includes transmitting and receiving information encoded in electromagnetic fields. In order to interpret such information, effective sensing systems are of great importance. For EW applications, the radio frequency (RF) spectrum is specifically relevant. Traditional RF receivers and transmitters rely on antennas and associated electronic components, whose performance is fundamentally limited by constraints imposed by the laws of classical physics. Motivated by the fundamental limitations of classical technologies, quantum technology has emerged as a strategic research area in many countries, with applications in computing, communication and sensing, and could therefore be useful in EW applications in the future. This thesis aims to investigate and compare two quantum sensing approaches: Rydberg atombased electric field sensors and nitrogen-vacancy center magnetometers. The goal is to evaluate their sensing principles, fundamental limitations and potential competitiveness compared to classical RF receivers. The work combines a literature review of published research in order to understand the underlying quantum mechanical principles enabling electromagnetic field sensing, with analytical comparisons of sensitivity and detection range. Classical receiver performance was modeled using thermal-noise-limited sensitivity, while quantum sensor performance was estimated using reported sensitivities from literature. Detection range calculations were performed under simplified assumptions to illustrate the differences between conventional and atom-based sensing approaches. The results show that current quantum sensors do not yet surpass state-of-the-art classical receivers in raw sensitivity. However, they offer several unique characteristics, including intrinsic calibration, wide frequency tunability and the possibility of direct field-based measurements without conventional impedance matching. The comparison further highlights the fundamentally different noise mechanisms governing classical and quantum sensing systems. Overall, quantum sensing represents a promising emerging technology for electromagnetic field detection. Although significant technical challenges remain, continued advances may enable future quantum sensors to complement or partially replace conventional RF sensing technologies.
Electromagnetic warfare (EW) refers to military operations exploiting the electromagnetic spectrum, and includes transmitting and receiving information encoded in electromagnetic fields. In order to interpret such information, effective sensing systems are of great importance. For EW applications, the radio frequency (RF) spectrum is specifically relevant. Traditional RF receivers and transmitters rely on antennas and associated electronic components, whose performance is fundamentally limited by constraints imposed by the laws of classical physics. Motivated by the fundamental limitations of classical technologies, quantum technology has emerged as a strategic research area in many countries, with applications in computing, communication and sensing, and could therefore be useful in EW applications in the future. This thesis aims to investigate and compare two quantum sensing approaches: Rydberg atombased electric field sensors and nitrogen-vacancy center magnetometers. The goal is to evaluate their sensing principles, fundamental limitations and potential competitiveness compared to classical RF receivers. The work combines a literature review of published research in order to understand the underlying quantum mechanical principles enabling electromagnetic field sensing, with analytical comparisons of sensitivity and detection range. Classical receiver performance was modeled using thermal-noise-limited sensitivity, while quantum sensor performance was estimated using reported sensitivities from literature. Detection range calculations were performed under simplified assumptions to illustrate the differences between conventional and atom-based sensing approaches. The results show that current quantum sensors do not yet surpass state-of-the-art classical receivers in raw sensitivity. However, they offer several unique characteristics, including intrinsic calibration, wide frequency tunability and the possibility of direct field-based measurements without conventional impedance matching. The comparison further highlights the fundamentally different noise mechanisms governing classical and quantum sensing systems. Overall, quantum sensing represents a promising emerging technology for electromagnetic field detection. Although significant technical challenges remain, continued advances may enable future quantum sensors to complement or partially replace conventional RF sensing technologies.
Rydberg atoms are atoms in their highly excited energy states. The physical properties of Rydberg atoms in the presence of external fields play an important role in quantum precision measurement. In recent years, radio-frequency electric field sensing based on Rydberg atoms has attracted significant interest. It is widely recognized as an electromagnetic sensing system fundamentally different from traditional ones. As a quantum sensor, it is expected to surpass several foundational limitations of traditional receivers, such as sensitivity, dynamic range and frequency bandwidth. It was reported that Rydberg sensing systems can sense microwaves of frequencies from DC up to 1THz. Its quantum nature would possibly avoid internal thermal (Johnson) noise, even at room temperature. Recent demonstrations have also observed high precision for terahertz imaging, strong fields sensing, proof-of-principle communication. However, limitations of this novel system have not been addressed, especially for a practical radar, communication or electronic warfare system. Here in this work, we first compare the architectures of different microwave receivers and then analyze the metrics of Rydberg microwave receivers, such as instantaneous bandwidth and dynamic range based on experimental results. We concluded by pointing out several main obstacles to overcome for realizing a practical state-of-the-art microwave receiver.
The spin and electronic degrees of freedom in atomic systems provide sensitive and versatile means for detecting electromagnetic fields, from DC to THz frequencies, with spatial resolutions ranging from the nanoscale to meter scale. Such sensors offer unique advantages compared to classical approaches, resulting from their intrinsic quantum nature. We review three different sensor modalities: atomic vapor magnetometers, nitrogen-vacancy-center magnetometers, and radio-frequency sensors based on Rydberg atoms. We emphasize the unique features and capabilities of these types of sensors in the context of real-world applications.
Rydberg-atom-based electrometry provides a quantum, SI-traceable approach to radio-frequency (RF) and microwave electric-field sensing by linking optical spectra to absolute field strength through electromagnetically induced trans parency. Over the past decade, rapid advances in excitation schemes, field-tuning methods, interferometric readout, and cavity-assisted coupling have significantly improved sensitivity, bandwidth, and tunability of Rydberg-based sensors. In parallel, progress in fiber-coupled modules, microfabricated vapor cells, and photonic integration is enabling compact and deployable receiver architectures. This review presents a comprehensive and metrology-oriented synthesis of the physical principles, system architectures, standardized performance metrics, and uncertainty considerations relevant to Rydberg-atom RF sensing. By con solidating diverse developments into a unified performance and evaluation framework, this work provides a critical reference for the design, comparison, and advancement of next-generation quantum RF sensors and standards.
Quantum Rydberg atom-based radio frequency (RF) sensors exploit the exceptional sensitivity of highly excited atomic states to detect electromagnetic fields with very high precision, offering potential advances in telecommunications, radar and microwave radiometer systems, GNSS-Reflectometers, and electromagnetic compatibility testing. This study presents a detailed MATLAB simulation analysis of radio-frequency sensors modeled as a five-level rubidium-87 (Rb-87) system under the influence of RF and optical fields. The simulation leverages the Lindblad master equation to capture the coherent evolution, the spontaneous emission, the collisional dephasing, and the field-induced ionization. For an external RF electric field of E0 = 100 mV/m, a frequency sweep from 10MHz to 10GHz reveals the impact of noise: an ideal case just limited by quantum noise yields a sensitivity of 0.01 µV/m/ v Hz and a SNR of 177dB, while for E0 = 10 mV/m and a realistic noise (-130 dBm/Hz) the sensitivity worsens to 72 - 633 µV/m/ v Hz and a SNR of 72 dB. The study investigates the effects of RF field amplitude, atom density, and environmental parameters such as residual magnetic field and ambient temperature, in the sensitivity and bandwidth of these promising receivers, offering a framework to optimize Rydberg-based sensing technologies for Earth Observation, Communication and Navigation systems.
With the escalating development of the quantum information technologies, the Rydberg atomic receiver has been envisioned as a promising alternative to its classical electronic counterparts, attracting extensive attentions from both physics and electronic engineering disciplines. By exploiting the electrical acuteness of Alkali atoms with diverse Rydberg energy states for electromagnetic field measurement, Rydberg atomic receiver is capable of surmounting the inherent limitations on the operating bandwidth and detection sensitivity of the classical electronic counterparts. Against this background, this article provides an extensive overview of Rydberg atomic communication and sensing from fundamental theory, critical technologies to practical implementations. Firstly, the milestones of the Rydberg atomic receiver evolution was introduced. Then we provide a clear understanding of Rydberg atomic receiver mechanisms from the perspective of classical communication and sensing, and highlight the unprecedented advantages over traditional electronic receivers as well as the technical challenges. Afterwards, necessary fundamentals are presented including the Rydberg atoms, typical non-coherent/coherent structures, and explicit experimental configurations, followed by discussions on state-of-the-art development of the Rydberg atomic receiver. Specifically, advancements on electric-field detection methods for accurate measurement of amplitude, phase, frequency and polarization, are extensively investigated. Based on the established methodologies, recent innovations in Rydberg atomic communication and sensing are reviewed, ranging from waveform design and array-based signal processing to radar applications like localization, imaging and remote sensing, with practical experimental results presented. Finally, we summarize the promising research trends around Rydberg atomic receiver.
Rydberg atom electric field sensors are tunable quantum sensors that can perform sensitive radio frequency measurements. Their qualities have piqued interest at longer wavelengths where their small size compares favorably to impedance-matched antennas. Here, we compare the signal detection sensitivity of cm-scale Rydberg sensors to similarly sized room-temperature electrically small antennas with active and passive receiver backends. We present and analyze effective circuit models for each sensor type, facilitating a fair sensitivity comparison for cm-scale sensors. We calculate that contemporary Rydberg sensor implementations are less sensitive than unmatched antennas with active amplification. However, we find that idealized Rydberg sensors operating with a maximized atom number and at the standard quantum limit may perform well beyond the capabilities of antenna-based sensors at room temperature, the sensitivities of both lying below typical atmospheric background noise.