Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2510.07110 · International Symposium on Computing and Networking

HPQEA: A Scalable and High-Performance Quantum Emulator with High-Bandwidth Memory for Diverse Algorithms Support

Tran Van Duy, Vu Tuan Hai, Vu Trung Duong Le, Hoai Luan Pham, Yasuhiko NAKASHIMA

Published Nov 25, 2025• 0 citations
arXivHTMLPDF

Abstract

In recent years, there has been a growing interest in the development of quantum emulation. However, existing studies often struggle to achieve broad applicability, high performance, and efficient resource and memory utilization. To address these challenges, we provide HPQEA, a quantum emulator based on the state-vector emulation approach. HPQEA includes three main features: a high-performance computing core, an optimized controlled-NOT gate computation strategy, and effective utilization of high-bandwidth memory. Verification and evaluation on the Alveo U280 board show that HPQEA can emulate quantum circuits with up to 30 qubits while maintaining high fidelity and low mean square error. It outperforms comparable FPGA-based systems by producing faster execution, supporting a wider range of algorithms, and requiring low hardware resources. Furthermore, it exceeds the Nvidia A100 in normalized gate speed for systems with up to 20 qubits. These results demonstrate the scalability and efficiency of HPQEA as a platform for emulating quantum algorithms.

DOI
10.1109/candar68384.2025.00021

Related papers

HPQEA: A Scalable FPGA‐Based High‐Performance Quantum Emulator With Parallel Architecture and High‐Bandwidth Memory Optimization

Van Duy Tran, Vu Tuan Hai, Vu Trung Duong Le +3 more

ABSTRACT In recent years, quantum emulation has attracted increasing attention as a practical approach for developing and evaluating quantum algorithms. However, existing solutions often face challenges in achieving broad applicability, high performance, and efficient utilization of hardware resources and memory. To address these limitations, this paper presents the high‐performance quantum emulation accelerator (HPQEA), a hardware architecture based on the state‐vector emulation approach. The proposed design incorporates four key techniques: a strict data storage strategy, a superior flexible processing element network, an optimized and parallelized CX swapper, and a high‐bandwidth memory‐based bulk data transfer engine. Implementation and evaluation on the Alveo U280 FPGA platform demonstrate that HPQEA can emulate quantum circuits efficiently while maintaining high fidelity and low mean square error. Experimental results show that for QFT benchmarks, HPQEA achieves up to 21,093 faster execution than the NVIDIA A100 GPU for circuits with fewer than 20 qubits. Moreover, the comparison with FPGA‐based related works shows promising results with significant speedup in terms of normalize gate speed from 2.77 to 1448.37. In addition, the architecture demonstrates strong energy efficiency, reducing power consumption by up to 15.58 compared to the Intel i9‐10940X CPU and 80.83 compared to the GTX 1080 GPU. These results highlight the scalability, efficiency, and practicality of HPQEA as a hardware platform for accelerating quantum algorithm emulation.

Concurrency and Computation Practice and Experience•Sep 1, 2026•0 citations

QEA: An Accelerator for Quantum Circuit Simulation with Resources Efficiency and Flexibility

Van Duy Tran, Vu Tuan Hai, Vu Trung Duong Le +2 more

The area of quantum circuit simulation has attracted a lot of attention in recent years. However, due to the exponentially increasing computational costs, assessing and validating these models on large datasets poses significant obstacles. Despite plenty of research in quantum simulation, issues such as memory management, system adaptability, and execution efficiency remain unresolved. In this study, we introduce QEA, a state vector-based hardware accelerator that overcomes these difficulties with four key improvements: optimized memory allocation management, open PE, flexible ALU, and simplified CX swapper. To evaluate QEA's capabilities, we implemented and evaluated it on the AMD Alveo U280 board, which uses only 0.534 W of power. Experimental results show that QEA is extremely flexible, supporting a wide range of quantum circuits, has excellent fidelity, making it appropriate for standard quantum emulators, and outperforms powerful CPUs and related works up to$153.16 \times$better in terms of normalized gate speed. This study has considerable potential as a useful approach for quantum emulators in future works.

arXiv:2503.14951•International Conference on Integrated Circuits, Design, and Verification (ICDV)•Jun 16, 2025•4 citations

FPGA Based Quantum Circuit Simulator: Processing 30 Qubit Systems

Nasir Ali Nasir Ali, Anupam Tiwari, Nadeem khan Nadeem khan +5 more

Abstract This paper presents a field-programmable gate array (FPGA) implementation of a quantum circuit simulator capable of processing 30-qubit systems, representing over 1.07 billion quantum states stored in 8 GB of memory. Built on the Xilinx Alveo U55C platform with High Bandwidth Memory (HBM) technology, our system demonstrates deterministic performance through a 16-bank parallel memory distribution architecture integrated with the Qiskit quantum computing framework. We achieved complete verification across all qubit configurations from 1 to 30 qubits, with execution times ranging from 5 milliseconds to approximately 49 minutes. The simulator supports a comprehensive quantum gate library including single-qubit operations (Hadamard, Pauli gates, rotation gates) and multi-qubit gates (CNOT, controlled-Z, Toffoli. Our performance analysis reveals distinct operational regimes where FPGA excels for small-scale circuits (1-12 qubits) but faces scalability challenges beyond 15 qubits when compared to GPU architectures. This work establishes FPGA as a practical platform for quantum algorithm development and circuit verification, particularly valuable for applications requiring deterministic timing and energy-efficient computation. The architecture provides clear pathways for expansion to 31+ qubits through memory configuration enhancements.

•Jan 20, 2026•1 citation

Improving Emulation of Quantum Algorithms using Space-Efficient Hardware Architectures

Naveed Mahmud, Esam El‐Araby

With rapid advancement in quantum computing technology, continuous efforts are being directed to simulation and emulation of quantum algorithms on classical platforms. A well-known limitation to classical emulation of quantum circuits is scalability. Existing hardware emulators implement gate-based circuit models of quantum circuits that result in heavy resource utilization and degrade the scalability of the system. Also, current quantum emulation hardware use fixedpoint arithmetic, which has an adverse effect on accuracy when the system is scaled up. In this work, we employ a complexmultiply-and-accumulate (CMAC) and lookup-based emulation approach that greatly reduces resource utilization and improves system scalability in terms of number of emulated qubits. We demonstrate emulation of up to 16 fully-entangled qubits which is highest among existing work. We design fully-pipelined, highthroughput hardware architectures that use floating-point precision for higher accuracy. Experimental evaluation and analysis of the architectures in terms of speed and area is also provided. The emulator is prototyped on a high-performance reconfigurable computing (HPRC) system and our results demonstrate quantitative improvement over existing Field-Programmable-Gate-Array (FPGA)-based hardware emulators.

IEEE International Conference on Application-specific Systems, Architectures and Processors (ASAP)•Jul 1, 2019•2 citations

A Scalable Emulator for Quantum Fourier Transform Using Multiple-FPGAs With High-Bandwidth-Memory

Hasitha Muthumala Waidyasooriya, Hiroki Oshiyama, Yuya Kurebayashi +2 more

Quantum computing is regarded as the future of computing that hopefully provides exponentially large processing power compared to the conventional digital computing. However, current quantum computers do not have the capability to correct errors caused by environmental noise, so that it is difficult to run useful algorithms that require deep quantum circuits. Therefore, emulation of quantum circuits in digital computers is essential. However, emulation of large quantum circuits requires enormous amount of computations, and leads to a very large processing time. To reduce the processing time, we propose an FPGA emulator with high-bandwidth-memory to emulate quantum Fourier transform (QFT), which is a major part of many quantum algorithms. The proposed FPGA emulator is scalable in terms of both processing speed and the number of qubits, and extendable to multiple FPGAs. We performed QFT emulations up to 30 qubits using two FPGAs. According to the measured results, we have achieved 23.6 ~ 24.5 times speed-up compared to a fully optimized 24-core CPU emulator.

IEEE Access•Jan 1, 2022•16 citations

A Scalable High-Precision and High-Throughput Architecture for Emulation of Quantum Algorithms

Naveed Mahmud, Esam El‐Araby

Quantum hardware emulators using field programmable gate arrays (FPGAs) have been demonstrated to efficiently exploit the inherent parallelism of quantum algorithms and perform better than sequential software simulators. However, one key problem in mapping quantum circuits on FPGAs is the exponential increase in resource requirements with the increase in the number of quantum bits (qubits). As a result, the precision of hardware emulators is often reduced to save resources and accommodate larger quantum circuits which results in lower accuracy and lower throughput. In this paper, we present a full precision FPGA quantum emulator that uses 32-bit floating-point arithmetic and has a fully pipelined architecture. Our emulator is capable of emulating an entangled 4-qubit quantum system performing Quantum Fourier Transform, Grover's Search algorithms on a single FPGA node. Our experimental work was conducted on a highly scalable multi-node (multi-FPGA) state-of-the-art high-performance reconfigurable computer (HPRC). Experimental results show that our emulator is functionally accurate and has a higher operating frequency relative to other emulators. For emulating larger-scale circuits we propose using a multi-node architecture scheme with low latency, high bandwidth inter-node communication.

IEEE International System-on-Chip Conference (SOCC)•Sep 1, 2018•12 citations
In recent years, there has been a growing interest in the development of quantum emulation. However, existing studies often struggle to achieve broad applicability, high performance, and efficient resource and memory utilization. To address these challenges, we provide HPQEA, a quantum emulator based on the state-vector emulation approach. HPQEA includes three main features: a high-performance computing core, an optimized controlled-NOT gate computation strategy, and effective utilization of high-bandwidth memory. Verification and evaluation on the Alveo U280 board show that HPQEA can emulate quantum circuits with up to 30 qubits while maintaining high fidelity and low mean square error. It outperforms comparable FPGA-based systems by producing faster execution, supporting a wider range of algorithms, and requiring low hardware resources. Furthermore, it exceeds the Nvidia A100 in normalized gate speed for systems with up to 20 qubits. These results demonstrate the scalability and efficiency of HPQEA as a platform for emulating quantum algorithms.
ABSTRACT In recent years, quantum emulation has attracted increasing attention as a practical approach for developing and evaluating quantum algorithms. However, existing solutions often face challenges in achieving broad applicability, high performance, and efficient utilization of hardware resources and memory. To address these limitations, this paper presents the high‐performance quantum emulation accelerator (HPQEA), a hardware architecture based on the state‐vector emulation approach. The proposed design incorporates four key techniques: a strict data storage strategy, a superior flexible processing element network, an optimized and parallelized CX swapper, and a high‐bandwidth memory‐based bulk data transfer engine. Implementation and evaluation on the Alveo U280 FPGA platform demonstrate that HPQEA can emulate quantum circuits efficiently while maintaining high fidelity and low mean square error. Experimental results show that for QFT benchmarks, HPQEA achieves up to 21,093 faster execution than the NVIDIA A100 GPU for circuits with fewer than 20 qubits. Moreover, the comparison with FPGA‐based related works shows promising results with significant speedup in terms of normalize gate speed from 2.77 to 1448.37. In addition, the architecture demonstrates strong energy efficiency, reducing power consumption by up to 15.58 compared to the Intel i9‐10940X CPU and 80.83 compared to the GTX 1080 GPU. These results highlight the scalability, efficiency, and practicality of HPQEA as a hardware platform for accelerating quantum algorithm emulation.
The area of quantum circuit simulation has attracted a lot of attention in recent years. However, due to the exponentially increasing computational costs, assessing and validating these models on large datasets poses significant obstacles. Despite plenty of research in quantum simulation, issues such as memory management, system adaptability, and execution efficiency remain unresolved. In this study, we introduce QEA, a state vector-based hardware accelerator that overcomes these difficulties with four key improvements: optimized memory allocation management, open PE, flexible ALU, and simplified CX swapper. To evaluate QEA's capabilities, we implemented and evaluated it on the AMD Alveo U280 board, which uses only 0.534 W of power. Experimental results show that QEA is extremely flexible, supporting a wide range of quantum circuits, has excellent fidelity, making it appropriate for standard quantum emulators, and outperforms powerful CPUs and related works up to153.16×153.16 \times153.16×better in terms of normalized gate speed. This study has considerable potential as a useful approach for quantum emulators in future works.
Abstract This paper presents a field-programmable gate array (FPGA) implementation of a quantum circuit simulator capable of processing 30-qubit systems, representing over 1.07 billion quantum states stored in 8 GB of memory. Built on the Xilinx Alveo U55C platform with High Bandwidth Memory (HBM) technology, our system demonstrates deterministic performance through a 16-bank parallel memory distribution architecture integrated with the Qiskit quantum computing framework. We achieved complete verification across all qubit configurations from 1 to 30 qubits, with execution times ranging from 5 milliseconds to approximately 49 minutes. The simulator supports a comprehensive quantum gate library including single-qubit operations (Hadamard, Pauli gates, rotation gates) and multi-qubit gates (CNOT, controlled-Z, Toffoli. Our performance analysis reveals distinct operational regimes where FPGA excels for small-scale circuits (1-12 qubits) but faces scalability challenges beyond 15 qubits when compared to GPU architectures. This work establishes FPGA as a practical platform for quantum algorithm development and circuit verification, particularly valuable for applications requiring deterministic timing and energy-efficient computation. The architecture provides clear pathways for expansion to 31+ qubits through memory configuration enhancements.
With rapid advancement in quantum computing technology, continuous efforts are being directed to simulation and emulation of quantum algorithms on classical platforms. A well-known limitation to classical emulation of quantum circuits is scalability. Existing hardware emulators implement gate-based circuit models of quantum circuits that result in heavy resource utilization and degrade the scalability of the system. Also, current quantum emulation hardware use fixedpoint arithmetic, which has an adverse effect on accuracy when the system is scaled up. In this work, we employ a complexmultiply-and-accumulate (CMAC) and lookup-based emulation approach that greatly reduces resource utilization and improves system scalability in terms of number of emulated qubits. We demonstrate emulation of up to 16 fully-entangled qubits which is highest among existing work. We design fully-pipelined, highthroughput hardware architectures that use floating-point precision for higher accuracy. Experimental evaluation and analysis of the architectures in terms of speed and area is also provided. The emulator is prototyped on a high-performance reconfigurable computing (HPRC) system and our results demonstrate quantitative improvement over existing Field-Programmable-Gate-Array (FPGA)-based hardware emulators.
Quantum computing is regarded as the future of computing that hopefully provides exponentially large processing power compared to the conventional digital computing. However, current quantum computers do not have the capability to correct errors caused by environmental noise, so that it is difficult to run useful algorithms that require deep quantum circuits. Therefore, emulation of quantum circuits in digital computers is essential. However, emulation of large quantum circuits requires enormous amount of computations, and leads to a very large processing time. To reduce the processing time, we propose an FPGA emulator with high-bandwidth-memory to emulate quantum Fourier transform (QFT), which is a major part of many quantum algorithms. The proposed FPGA emulator is scalable in terms of both processing speed and the number of qubits, and extendable to multiple FPGAs. We performed QFT emulations up to 30 qubits using two FPGAs. According to the measured results, we have achieved 23.6 ~ 24.5 times speed-up compared to a fully optimized 24-core CPU emulator.
Quantum hardware emulators using field programmable gate arrays (FPGAs) have been demonstrated to efficiently exploit the inherent parallelism of quantum algorithms and perform better than sequential software simulators. However, one key problem in mapping quantum circuits on FPGAs is the exponential increase in resource requirements with the increase in the number of quantum bits (qubits). As a result, the precision of hardware emulators is often reduced to save resources and accommodate larger quantum circuits which results in lower accuracy and lower throughput. In this paper, we present a full precision FPGA quantum emulator that uses 32-bit floating-point arithmetic and has a fully pipelined architecture. Our emulator is capable of emulating an entangled 4-qubit quantum system performing Quantum Fourier Transform, Grover's Search algorithms on a single FPGA node. Our experimental work was conducted on a highly scalable multi-node (multi-FPGA) state-of-the-art high-performance reconfigurable computer (HPRC). Experimental results show that our emulator is functionally accurate and has a higher operating frequency relative to other emulators. For emulating larger-scale circuits we propose using a multi-node architecture scheme with low latency, high bandwidth inter-node communication.