Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2509.02353

Thermodynamics of a phaseonium-driven optomechanical Otto engine

Federico Amato, Gerardo Adesso, G. Massimo Palma, Salvatore Lorenzo, Rosario Lo Franco

quant-phSubmitted Sep 2, 2025• Announced Sep 3, 2025• Revised Sep 22, 2026 (v4)
v1 · Sep 2, 2025v2 · Sep 5, 2025v3 · Mar 11, 2026v4 · Sep 22, 2026
arXivHTMLPDF

Abstract

We study an optomechanical Otto engine whose working medium is a single-mode cavity driven by beams of coherently prepared three-level phaseonium atoms. The atoms are not thermal reservoirs in the Gibbs sense; rather, their populations and ground-state coherence set the detailed-balance ratio of the cavity collision map, so that the field relaxes to a Gibbs state at an operational apparent temperature. We combine the finite-time collision-model dynamics with radiation-pressure work extraction and compare three reservoir preparations: a thermal reference at the same apparent temperatures, an incoherent atomic beam with the same populations, and the coherent phaseonium beam. We show that the phaseonium isochore charges the cavity passively: the cavity ergotropy and energy-basis coherence remain zero up to numerical precision, while the state converges to the Gibbs fixed point selected by the apparent detailed balance. We further estimate lower bounds on the cost of preparing the atomic populations and coherence, showing that the relevant advantage of phaseonium is a resource-preparation tradeoff rather than a cost-free enhancement over a thermal bath at the same temperature. Finally, we assess the finite-time performance of a two-cavity cascade with additive mechanical work accounting. Over the investigated coherence-phase range, the cascade produces approximately $47\%$--$52\%$ more power than the single-cavity engine while requiring only $65\%$--$68\%$ of the hot and cold phaseonium atoms needed by two independent engines, resulting in a $9\%$--$15\%$ enhancement of power per injected atom over a complete cycle.

DOI
10.1103/hl39-wfbr
Comments
15 pages; 10 figures

Related papers

Quantum Otto engine with quantum correlations

Yang Xiao, Dehua Liu, Jizhou He +3 more

We theoretically propose and investigate a quantum Otto engine that works with a single-mode radiation field inside an optical cavity and is driven alternately by a hot reservoir and a cold reservoir. The hot reservoir is realized using a beam composed of thermally entangled pairs of two-level atoms that interacts resonantly with the cavity, and the cold reservoir is composed of a collection of noninteracting boson modes. In terms of the quantum discord of the pair of atoms, we derive analytical expressions for the performance parameters (i.e., power and efficiency) and the stability measure (the coefficient of variation of power). We show that nonclassical correlations boost the quantum engine's performance and efficiency, and they may even change the operation mode at specified values of the two bath temperatures. We also demonstrate that the nonclassical correlations improve the stability of the machine by reducing the coefficient of variation of power that satisfies the generalized thermodynamic uncertainty relation. Finally, we find that these results can be transferred to another quantum Otto engine model, in which the optical cavity is coupled alternately to a hot thermal bosonic bath and to a beam composed of pairs of the two correlated atoms that plays the role of a cold reservoir.

arXiv:2211.12672•Physical Review A•Oct 19, 2023•18 citations

Finite-time quantum Otto engine with a squeezed thermal bath: Role of quantum coherence and squeezing in the performance and fluctuations

Xiao Ping Yang, Dehua Liu, Jizhou He +2 more

We consider a finite-time quantum Otto heat engine that consists of two isochoric (thermal-contact) process, where the system is alternatively coupled to a hot squeezed and a cold thermal reservoir, and two unitary driven strokes, where the system is isolated from these two baths and its von Neumann entropy keeps constant. Both quantum inner friction and coherence are generated along the driven stroke and coherence cannot be fully erased after the finite-time hot isochore. Using full counting statistics, we present the probability distribution functions of heat injection and total work per cycle, which are dependent on the time duration along each process. With these, we derive the analytical expressions for the thermodynamic quantities of the two-level heat engine, such as total work, thermodynamic efficiency, entropy production, and work fluctuations, in which effects of coherence, squeezing, inner friction and finite-time heat exchange are included. We then numerically determine the thermodynamic quantities and the fluctuations using the parameters employed in the experimental implementation. Our results clarify the role of coherence and squeezing in the performance and fluctuations in the quantum Otto engines.

arXiv:2205.13290•May 26, 2022•6 citations

Squeezing-Fueled Quantum Otto Engine via Measurement-Induced Cooling: The Two-Qubit Quantum Rabi Model

S R Rathnakaran, Asoka Biswas

We investigate a quantum Otto engine (QOE) constructed from the two-qubit quantum Rabi model, operating within a cavity quantum electrodynamics (QED) architecture. The engine operates with two qubits as the working substance and a single non-Markovian hot thermal bath, modeled via the hierarchical equations of motion (HEOM) formalism. In place of a conventional cold thermal reservoir, the cooling stroke is realized through a projective measurement protocol on the cavity mode, which acts as an ancillary subsystem and effectively mimics a cold bath for the qubit working medium via measurement back-action. A squeezing drive applied to the cavity mode serves as a quantum fuel. We demonstrate that cavity squeezing systematically enhances both the power output and operational efficiency of the engine - the work extracted per unit of heat drawn from the hot bath-driving it above the standard quantum Otto limit. In the limit-cycle regime, the efficiency, while remaining above the Otto bound throughout, asymptotically converges to it from above. This identifies squeezing as a controllable quantum resource for thermodynamic optimization. Our results reveal that the interplay between qubit-cavity coupling, measurement-induced cooling, and non-equilibrium squeezing gives rise to a multi-resource thermodynamic architecture with performance characteristics inaccessible to conventional two-bath quantum Otto engines, thereby providing a concrete route toward experimentally realizable quantum heat engines in cavity QED platforms.

quant-pharXiv:2608.02521•Quantum Science and Technology•Aug 4, 2026•0 citations

Collective thermalization, work reliability, and resource bounds in a population-inverted Dicke Otto engine

Cler T. Garcez, Gabriella G. Damas, Norton G. de Almeida +1 more

Population inversion and collective relaxation can both enhance the performance of a quantum heat engine, but through distinct mechanisms. We study a quantum Otto engine whose working medium is a symmetric collective spin of $N$ two-level constituents. For commuting work strokes and collective reservoir coupling, the dynamics reduces exactly to a finite birth--death process on the Dicke ladder, allowing a unified treatment of stationary operation, work fluctuations, and finite-time relaxation. In the complete-reset limit, passive work per cycle saturates with system size, whereas population inversion yields work that grows linearly with $N$. The work reliability shows the same linear scaling, exceeding the square-root behavior of $N$ independent engines. This enhancement originates from a macroscopic polarization displacement between hot and cold states, while collective coupling instead accelerates the finite-time dynamics through Dicke transition rates. For matched passive and inverted hot states, the extra gross work equals the Otto efficiency times the ergotropy of the inverted state. Charging the corresponding reversible excess state-formation cost removes this advantage, showing that the enhanced output converts a pre-existing active-state resource rather than generating a free thermodynamic gain. Exact finite-contact trajectory statistics further quantify how collective kinetics, fluctuations, correlations, and resource accounting remain linked away from complete reset.

quant-pharXiv:2609.30132•Sep 25, 2026•3 citations

Nonadiabatic single-qubit quantum Otto engine

Andrea Solfanelli, Marco Falsetti, Michele Campisi

According to Clausius formulation of the second law of thermodynamics, for any thermal machine withdrawing heats ${Q}_{1,2}$ from two heat reservoirs at temperatures ${T}_{1,2}$, it holds that ${Q}_{1}/{T}_{1}+{Q}_{2}/{T}_{2}\ensuremath{\le}0$. Combined with the observation that the quantity ${Q}_{1}+{Q}_{2}$ is the work $W$ done by the system, that inequality tells us that only four operation modes are possible for the thermal machine, namely, heat engine, refrigerator, thermal accelerator, and heater. We illustrate their emergence in the finite time operation of a quantum Otto engine realized with a single qubit. We first focus on the ideal case when isochoric and thermally insulated strokes are well separated and give general results as well as results pertaining to the specific finite-time Landau-Zener dynamics. We then present realistic results pertaining to the solid-state experimental implementation proposed by Karimi and Pekola [Phys. Rev. B 94, 184503 (2016)]. That device is nonadiabatic both in the quantum mechanical sense and in the thermodynamical sense. Oscillations in the power extracted from the baths due to coherent LZ tunneling at too low of temperatures are observed that might hinder the robustness of the operation of the device against experimental noise on the control parameters.

arXiv:1911.11416•Physical review. B./Physical review. B•Feb 25, 2020•86 citations

Temperature- and interaction-tweaked efficiency boost of finite-time robust quantum Otto engines

Debarupa Saha, Ahana Ghoshal, Ujjwal Sen

We demonstrate that under specific conditions, a finite-time quantum Otto engine, employing a spin-1/2 particle as the working substance, despite undergoing incomplete Otto cycles, can achieve higher efficiency than an ideal quantum Otto engine. A finite-time quantum Otto engine refers to an Otto engine where the two isochoric strokes are prematurely terminated before reaching thermal equilibrium with their respective hot and cold baths. We observe that the enhancement of efficiency of a finite-time quantum Otto engine over the ideal one can be realized by adjusting the initial temperature of the working substance within the temperature range of the hot and cold baths. We also find that incorporating an auxiliary qubit, and activating specific interactions between the single-qubit working substance and the auxiliary one, can enhance the efficiency of a finite-time as well as an ideal quantum Otto engine. Furthermore, we analyze the impact of glassy disorder within the system-bath coupling during the two isochoric strokes on the efficiency of a finite-time quantum Otto engine. We find that as strength of disorder increases, efficiency of a finite-time quantum Otto engine tends to decrease, albeit with relatively modest reduction even for strong disorder. However, the advantage in efficiency of the finite-time quantum Otto engine over the ideal one, obtained by tuning the initial state temperature, and the efficiency enhancement obtained by incorporating an auxiliary over the without-auxiliary scenario, persists even in presence of substantial disorder. Additionally, we show that while this disorder does not affect the ideal efficiency, it does influence the duration of isochoric strokes needed for an Otto engine to reach ideal efficiency. This stroke duration remains nearly constant until a specific disorder strength, beyond which it increases rapidly.

arXiv:2309.11483•Sep 20, 2023•4 citations
We study an optomechanical Otto engine whose working medium is a single-mode cavity driven by beams of coherently prepared three-level phaseonium atoms. The atoms are not thermal reservoirs in the Gibbs sense; rather, their populations and ground-state coherence set the detailed-balance ratio of the cavity collision map, so that the field relaxes to a Gibbs state at an operational apparent temperature. We combine the finite-time collision-model dynamics with radiation-pressure work extraction and compare three reservoir preparations: a thermal reference at the same apparent temperatures, an incoherent atomic beam with the same populations, and the coherent phaseonium beam. We show that the phaseonium isochore charges the cavity passively: the cavity ergotropy and energy-basis coherence remain zero up to numerical precision, while the state converges to the Gibbs fixed point selected by the apparent detailed balance. We further estimate lower bounds on the cost of preparing the atomic populations and coherence, showing that the relevant advantage of phaseonium is a resource-preparation tradeoff rather than a cost-free enhancement over a thermal bath at the same temperature. Finally, we assess the finite-time performance of a two-cavity cascade with additive mechanical work accounting. Over the investigated coherence-phase range, the cascade produces approximately 47%47\%47%--52%52\%52% more power than the single-cavity engine while requiring only 65%65\%65%--68%68\%68% of the hot and cold phaseonium atoms needed by two independent engines, resulting in a 9%9\%9%--15%15\%15% enhancement of power per injected atom over a complete cycle.
We theoretically propose and investigate a quantum Otto engine that works with a single-mode radiation field inside an optical cavity and is driven alternately by a hot reservoir and a cold reservoir. The hot reservoir is realized using a beam composed of thermally entangled pairs of two-level atoms that interacts resonantly with the cavity, and the cold reservoir is composed of a collection of noninteracting boson modes. In terms of the quantum discord of the pair of atoms, we derive analytical expressions for the performance parameters (i.e., power and efficiency) and the stability measure (the coefficient of variation of power). We show that nonclassical correlations boost the quantum engine's performance and efficiency, and they may even change the operation mode at specified values of the two bath temperatures. We also demonstrate that the nonclassical correlations improve the stability of the machine by reducing the coefficient of variation of power that satisfies the generalized thermodynamic uncertainty relation. Finally, we find that these results can be transferred to another quantum Otto engine model, in which the optical cavity is coupled alternately to a hot thermal bosonic bath and to a beam composed of pairs of the two correlated atoms that plays the role of a cold reservoir.
We consider a finite-time quantum Otto heat engine that consists of two isochoric (thermal-contact) process, where the system is alternatively coupled to a hot squeezed and a cold thermal reservoir, and two unitary driven strokes, where the system is isolated from these two baths and its von Neumann entropy keeps constant. Both quantum inner friction and coherence are generated along the driven stroke and coherence cannot be fully erased after the finite-time hot isochore. Using full counting statistics, we present the probability distribution functions of heat injection and total work per cycle, which are dependent on the time duration along each process. With these, we derive the analytical expressions for the thermodynamic quantities of the two-level heat engine, such as total work, thermodynamic efficiency, entropy production, and work fluctuations, in which effects of coherence, squeezing, inner friction and finite-time heat exchange are included. We then numerically determine the thermodynamic quantities and the fluctuations using the parameters employed in the experimental implementation. Our results clarify the role of coherence and squeezing in the performance and fluctuations in the quantum Otto engines.
We investigate a quantum Otto engine (QOE) constructed from the two-qubit quantum Rabi model, operating within a cavity quantum electrodynamics (QED) architecture. The engine operates with two qubits as the working substance and a single non-Markovian hot thermal bath, modeled via the hierarchical equations of motion (HEOM) formalism. In place of a conventional cold thermal reservoir, the cooling stroke is realized through a projective measurement protocol on the cavity mode, which acts as an ancillary subsystem and effectively mimics a cold bath for the qubit working medium via measurement back-action. A squeezing drive applied to the cavity mode serves as a quantum fuel. We demonstrate that cavity squeezing systematically enhances both the power output and operational efficiency of the engine - the work extracted per unit of heat drawn from the hot bath-driving it above the standard quantum Otto limit. In the limit-cycle regime, the efficiency, while remaining above the Otto bound throughout, asymptotically converges to it from above. This identifies squeezing as a controllable quantum resource for thermodynamic optimization. Our results reveal that the interplay between qubit-cavity coupling, measurement-induced cooling, and non-equilibrium squeezing gives rise to a multi-resource thermodynamic architecture with performance characteristics inaccessible to conventional two-bath quantum Otto engines, thereby providing a concrete route toward experimentally realizable quantum heat engines in cavity QED platforms.
Population inversion and collective relaxation can both enhance the performance of a quantum heat engine, but through distinct mechanisms. We study a quantum Otto engine whose working medium is a symmetric collective spin of NNN two-level constituents. For commuting work strokes and collective reservoir coupling, the dynamics reduces exactly to a finite birth--death process on the Dicke ladder, allowing a unified treatment of stationary operation, work fluctuations, and finite-time relaxation. In the complete-reset limit, passive work per cycle saturates with system size, whereas population inversion yields work that grows linearly with NNN. The work reliability shows the same linear scaling, exceeding the square-root behavior of NNN independent engines. This enhancement originates from a macroscopic polarization displacement between hot and cold states, while collective coupling instead accelerates the finite-time dynamics through Dicke transition rates. For matched passive and inverted hot states, the extra gross work equals the Otto efficiency times the ergotropy of the inverted state. Charging the corresponding reversible excess state-formation cost removes this advantage, showing that the enhanced output converts a pre-existing active-state resource rather than generating a free thermodynamic gain. Exact finite-contact trajectory statistics further quantify how collective kinetics, fluctuations, correlations, and resource accounting remain linked away from complete reset.
According to Clausius formulation of the second law of thermodynamics, for any thermal machine withdrawing heats Q1,2{Q}_{1,2}Q1,2​ from two heat reservoirs at temperatures T1,2{T}_{1,2}T1,2​, it holds that ${Q}_{1}/{T}_{1}+{Q}_{2}/{T}_{2}\ensuremath{\le}0$. Combined with the observation that the quantity Q1+Q2{Q}_{1}+{Q}_{2}Q1​+Q2​ is the work WWW done by the system, that inequality tells us that only four operation modes are possible for the thermal machine, namely, heat engine, refrigerator, thermal accelerator, and heater. We illustrate their emergence in the finite time operation of a quantum Otto engine realized with a single qubit. We first focus on the ideal case when isochoric and thermally insulated strokes are well separated and give general results as well as results pertaining to the specific finite-time Landau-Zener dynamics. We then present realistic results pertaining to the solid-state experimental implementation proposed by Karimi and Pekola [Phys. Rev. B 94, 184503 (2016)]. That device is nonadiabatic both in the quantum mechanical sense and in the thermodynamical sense. Oscillations in the power extracted from the baths due to coherent LZ tunneling at too low of temperatures are observed that might hinder the robustness of the operation of the device against experimental noise on the control parameters.
We demonstrate that under specific conditions, a finite-time quantum Otto engine, employing a spin-1/2 particle as the working substance, despite undergoing incomplete Otto cycles, can achieve higher efficiency than an ideal quantum Otto engine. A finite-time quantum Otto engine refers to an Otto engine where the two isochoric strokes are prematurely terminated before reaching thermal equilibrium with their respective hot and cold baths. We observe that the enhancement of efficiency of a finite-time quantum Otto engine over the ideal one can be realized by adjusting the initial temperature of the working substance within the temperature range of the hot and cold baths. We also find that incorporating an auxiliary qubit, and activating specific interactions between the single-qubit working substance and the auxiliary one, can enhance the efficiency of a finite-time as well as an ideal quantum Otto engine. Furthermore, we analyze the impact of glassy disorder within the system-bath coupling during the two isochoric strokes on the efficiency of a finite-time quantum Otto engine. We find that as strength of disorder increases, efficiency of a finite-time quantum Otto engine tends to decrease, albeit with relatively modest reduction even for strong disorder. However, the advantage in efficiency of the finite-time quantum Otto engine over the ideal one, obtained by tuning the initial state temperature, and the efficiency enhancement obtained by incorporating an auxiliary over the without-auxiliary scenario, persists even in presence of substantial disorder. Additionally, we show that while this disorder does not affect the ideal efficiency, it does influence the duration of isochoric strokes needed for an Otto engine to reach ideal efficiency. This stroke duration remains nearly constant until a specific disorder strength, beyond which it increases rapidly.