Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2509.00962 · IEEE International System-on-Chip Conference (SOCC)

Lightweight Error-Correction Code Encoders in Superconducting Electronic Systems

Yerzhan Mustafa, Berker Peköz, Selçuk Köse

Published Sep 29, 2025• 1 citation
arXivHTMLPDF

Abstract

Data transmission from superconducting electronic circuits, such as single flux quantum (SFQ) logic, to room-temperature electronics is susceptible to bit errors, which may result from flux trapping, fabrication defects, and process parameter variations (PPV). Due to the cooling power budget at 4.2 K and constraints on the chip area, the size of the error-correction code encoders is limited. In this work, three lightweight error-correction code encoders are proposed that are based on Hamming(7,4), Hamming(8,4), and Reed-Muller(1,3) codes and implemented with SFQ logic. The performance of these encoders is analyzed in the presence of PPV. The trade-offs between the theoretical complexity and physical size of error-correction code encoders are identified.

DOI
10.1109/socc66126.2025.11235429

Related papers

Toward Scalable Quantum Computing with Superconducting Circuits

Michael Kerschbaum

Quantum computing holds the promise of solving problems that are intractable for classical computers, with applications ranging from optimization and materials simulation to cryptography. It achieves this by leveraging the exponentially scaling dimensionality of the space encoding quantum information and by executing algorithms on quantum registers in superposition states – a feature often referred to as quantum parallelism. However, while encoding information in computational units capable of exploring a continuous set of quantum states enables exponential scaling of computational power with system size, quantum systems are also more susceptible to errors than their classical counterparts. These errors take the form of both control errors, where miscalibration of the control pulses causes coherent errors on the qubit states, as well as incoherent errors due to energy relaxation and dephasing. Scaling quantum systems to run useful algorithms involving hundreds or thousands of logical qubits will require quantum error correction. In this approach, quantum information is redundantly encoded across an entangled state of many physical qubits. This has enabled experimental demonstrations across various platforms – including ion traps, superconducting circuits, and neutral atoms – showing that encoded quantum states can be preserved beyond the coherence times of the constituting physical qubits. However, quantum state preservation is only one component needed for scalable quantum computing. To execute algorithms, it is also necessary to implement quantum gates on and between encoded qubits, in a way that maintains fault tolerance by preserving the ability to correct errors as they occur during the computation. In the first part of this thesis, we demonstrate the implementation of an error-corrected quantum operation that entangles two logical qubits. This is achieved by performing lattice surgery on a distance-three surface code qubit, resulting in a logical Bell state encoded in distance-three repetition codes, which enable the correction of single bit-flip errors. We further introduce techniques to benchmark and characterize the performance of logical operations, including applying the protocol to arbitrary logical input states and performing logical quantum process tomography. Together, these results constitute one of the first realizations of error-corrected lattice surgery in superconducting circuits. While quantum error correction can correct errors provided they occur with sufficiently low frequency, it may fail when many qubits experience errors simultaneously. In the second part of this thesis, we therefore shift focus to a specific error mechanism known to cause correlated errors in superconducting circuits – quasiparticle-induced decoherence. In this case, various forms of energy deposition on the quantum device can break Cooper pairs into quasiparticles, which may subsequently diffuse to the tunnel junction and interact with the qubit state, thereby causing decoherence. In this thesis, we investigate the impact of quasiparticle tunneling on qubit performance, with a focus on infrared-induced quasiparticles. We compare the sensitivity of niobium-based qubits to those made from tantalum – a material that has gained interest in recent years following demonstrations of qubits with improved coherence times based on this material. Using a thermal radiator source, we show that the performance of tantalum qubits may be limited by infrared-induced quasiparticles in typical superconducting circuit experimental setups. By employing both ambient and in-line infrared filters, we investigate the effectiveness of different filtering strategies and develop best practices for engineering cryogenic environments for superconducting quantum processors. The results presented in this thesis contribute to the advancement of quantum computing based on superconducting circuits by implementing and characterizing quantum error-corrected operations, and by investigating quasiparticles as a source of decoherence, along with strategies to improve infrared filtering and signal conditioning in cryogenic environments for future fault-tolerant quantum computing.

•Jan 1, 2026•0 citations

NISQ+: Boosting quantum computing power by approximating quantum error correction

Adam A. Holmes, Mohammad Reza Jokar, Ghasem Pasandi +3 more

Quantum computers are growing in size, and design decisions are being made now that attempt to squeeze more computation out of these machines. In this spirit, we design a method to boost the computational power of nearterm quantum computers by adapting protocols used in quantum error correction to implement “Approximate Quantum Error Correction (AQEC):” By approximating fully-fledged error correction mechanisms, we can increase the compute volume (qubits $\times$ gates, or “Simple Quantum Volume (SQV)”) of near-term machines. The crux of our design is a fast hardware decoder that can approximately decode detected error syndromes rapidly. Specifically, we demonstrate a proof-of-concept that approximate error decoding can be accomplished online in near-term quantum systems by designing and implementing a novel algorithm in superconducting Single Flux Quantum (SFQ) logic technology. This avoids a critical decoding backlog, hidden in all offline decoding schemes, that leads to idle time exponential in the number of T gates in a program [58]. Our design utilizes one SFQ processing module per physical quantum bit. Employing state-of-the-art SFQ synthesis tools, we show that the circuit area, power, and latency are within the constraints of typical, contemporary quantum system designs. Under a pure dephasing error model, the proposed accelerator and AQEC solution is able to expand SQV by factors between 3,402 and 11,163 on expected near-term machines. The decoder achieves a 5% accuracy threshold as well as pseudo-thresholds of approximately 5%, 4.75%, 4.5%, and 3.5% physical error rates for code distances 3, 5, 7, and 9, respectively. Decoding solutions are achieved in a maximum of $\sim$20 nanoseconds on the largest code distances studied. By avoiding the exponential idle time in offline decoders, we achieve a 10x reduction in required code distances to achieve the same logical performance as alternative designs.

arXiv:2004.04794•Proceedings - International Symposium on Computer Architecture/Proceedings•May 1, 2020•104 citations

QECOOL: On-Line Quantum Error Correction with a Superconducting Decoder for Surface Code

Yosuke Ueno, Masaaki Kondo, Masamitsu Tanaka +2 more

Due to the low error tolerance of a qubit, detecting and correcting errors on it is essential for fault-tolerant quantum computing. Surface code (SC) associated with its decoding algorithm is one of the most promising quantum error correction (QEC) methods. QEC needs to be very power-efficient since the power budget is limited inside of a dilution refrigerator for superconducting qubits by which one of the most successful quantum computers (QCs) is built. In this paper, we propose an online-QEC algorithm and its hardware implementation with SFQ based superconducting digital circuits. We design a key building block of the proposed hardware with an SFQ cell library and evaluate it by the SPICE-level simulation. Each logic element is composed of about 3000 Josephson junctions and power consumption is about $2.78 \mu \mathrm{W}$ when operating with 2 GHz clock frequency which meets the required decoding speed. Our decoder is simulated on a quantum error simulator for code distances 5 to 13 and achieves a 1.0% accuracy threshold.

arXiv:2103.14209•ACM/IEEE Design Automation Conference (DAC)•Nov 8, 2021•70 citations

Interfacing Superconductor and Semiconductor Digital Electronics

Yerzhan Mustafa, Selçuk Köse

Interface circuits are the key components that enable the hybrid integration of superconductor and semiconductor digital electronics. The design requirements of superconductor-semiconductor interface circuits vary depending on the application, such as high-performance classical computing, superconducting quantum computing, and digital signal processing. In this survey, various interface circuits are categorized based on the working principle and structure. The superconducting output drivers are explored, which are capable of converting and amplifying, e.g., single flux quantum (SFQ) voltage pulses, to voltage levels that semiconductor circuits can process. Several trade-offs between circuit- and system-level design parameters are examined. Accordingly, parameters such as the data rate, output voltage, power dissipation, layout area, thermal/heat load of cryogenic cables, and bit-error rate are considered.

physics.app-phCross-listedarXiv:2601.09969•Applied Physics Reviews•Jan 16, 2026•3 citations

Quantum Computing Chip with Error-Correction Encoding

Lingxiao Wan, Hui Zhang, Huihui Zhu +2 more

We design and fabricate a quantum photonic circuit to implement a quantum error correction code. A single logical qubit is encoded with 4 physical qubits to demonstrate its capability of detecting and correcting a single-bit error with an average state fidelity of 86%. We further extend the scheme to demonstrate a fault-tolerant teleportation process.

Conference on Lasers and Electro-Optics•Jan 1, 2022•0 citations

Analyzing the switching errors of RSFQ-circuits

Olaf Mielke, Thomas Ortlepp

The Rapid Single Flux Quantum electronics is a superconducting, naturally digital circuit family which is currently close to getting commercially applied.RSFQ is outstanding by its very low switching energy resulting in a very low power consumption which is the reason for a significant influence on thermal noise.For industrial applications a certain noise immunity is required which is still a challenge especially for circuits of higher complexity.In superconducting electronics resistors are the only on-chip noise sources.We analyzed the influence of each individual resistor in a toggle Flip-Flop circuit to the overall bit-error rate.The shunt resistors of comparator structures are the dominant noise sources and bias resistors have almost no influence.We analyzed in detail the types of thermal introduced switching errors of an toggle Flip-Flop which was optimized with respect to the fabrication yield.Simulation studies were accomplished to investigate the influence of circuit parameters on quality and on quantity of switching errors.By identifying and manipulating the parameters with the most significant influence on the noise susceptibility an enhanced noise immunity of the device can be achieved.The goal is to improve the robustness of RSFQ circuits against the influence of thermal noise for an specific topology by changing the circuit parameters of the device.

USB-Flash-Ausg.:#R#<br/>Information technology and electrical engineering - devices and systems, materials and technologies for the future : 54. IWK, Internationales Wissenschaftliches Kolloquium ; proceedings ; 07 - 10 September 2009 / Faculty of Electrical and Information Technology, Technische Universität Ilmenau. - Ilmenau : Verl. ISLE, 2009. - ISBN 978-3-938843-45-1•Jan 1, 2009•0 citations
Data transmission from superconducting electronic circuits, such as single flux quantum (SFQ) logic, to room-temperature electronics is susceptible to bit errors, which may result from flux trapping, fabrication defects, and process parameter variations (PPV). Due to the cooling power budget at 4.2 K and constraints on the chip area, the size of the error-correction code encoders is limited. In this work, three lightweight error-correction code encoders are proposed that are based on Hamming(7,4), Hamming(8,4), and Reed-Muller(1,3) codes and implemented with SFQ logic. The performance of these encoders is analyzed in the presence of PPV. The trade-offs between the theoretical complexity and physical size of error-correction code encoders are identified.
Quantum computing holds the promise of solving problems that are intractable for classical computers, with applications ranging from optimization and materials simulation to cryptography. It achieves this by leveraging the exponentially scaling dimensionality of the space encoding quantum information and by executing algorithms on quantum registers in superposition states – a feature often referred to as quantum parallelism. However, while encoding information in computational units capable of exploring a continuous set of quantum states enables exponential scaling of computational power with system size, quantum systems are also more susceptible to errors than their classical counterparts. These errors take the form of both control errors, where miscalibration of the control pulses causes coherent errors on the qubit states, as well as incoherent errors due to energy relaxation and dephasing. Scaling quantum systems to run useful algorithms involving hundreds or thousands of logical qubits will require quantum error correction. In this approach, quantum information is redundantly encoded across an entangled state of many physical qubits. This has enabled experimental demonstrations across various platforms – including ion traps, superconducting circuits, and neutral atoms – showing that encoded quantum states can be preserved beyond the coherence times of the constituting physical qubits. However, quantum state preservation is only one component needed for scalable quantum computing. To execute algorithms, it is also necessary to implement quantum gates on and between encoded qubits, in a way that maintains fault tolerance by preserving the ability to correct errors as they occur during the computation. In the first part of this thesis, we demonstrate the implementation of an error-corrected quantum operation that entangles two logical qubits. This is achieved by performing lattice surgery on a distance-three surface code qubit, resulting in a logical Bell state encoded in distance-three repetition codes, which enable the correction of single bit-flip errors. We further introduce techniques to benchmark and characterize the performance of logical operations, including applying the protocol to arbitrary logical input states and performing logical quantum process tomography. Together, these results constitute one of the first realizations of error-corrected lattice surgery in superconducting circuits. While quantum error correction can correct errors provided they occur with sufficiently low frequency, it may fail when many qubits experience errors simultaneously. In the second part of this thesis, we therefore shift focus to a specific error mechanism known to cause correlated errors in superconducting circuits – quasiparticle-induced decoherence. In this case, various forms of energy deposition on the quantum device can break Cooper pairs into quasiparticles, which may subsequently diffuse to the tunnel junction and interact with the qubit state, thereby causing decoherence. In this thesis, we investigate the impact of quasiparticle tunneling on qubit performance, with a focus on infrared-induced quasiparticles. We compare the sensitivity of niobium-based qubits to those made from tantalum – a material that has gained interest in recent years following demonstrations of qubits with improved coherence times based on this material. Using a thermal radiator source, we show that the performance of tantalum qubits may be limited by infrared-induced quasiparticles in typical superconducting circuit experimental setups. By employing both ambient and in-line infrared filters, we investigate the effectiveness of different filtering strategies and develop best practices for engineering cryogenic environments for superconducting quantum processors. The results presented in this thesis contribute to the advancement of quantum computing based on superconducting circuits by implementing and characterizing quantum error-corrected operations, and by investigating quasiparticles as a source of decoherence, along with strategies to improve infrared filtering and signal conditioning in cryogenic environments for future fault-tolerant quantum computing.
Quantum computers are growing in size, and design decisions are being made now that attempt to squeeze more computation out of these machines. In this spirit, we design a method to boost the computational power of nearterm quantum computers by adapting protocols used in quantum error correction to implement “Approximate Quantum Error Correction (AQEC):” By approximating fully-fledged error correction mechanisms, we can increase the compute volume (qubits ×\times× gates, or “Simple Quantum Volume (SQV)”) of near-term machines. The crux of our design is a fast hardware decoder that can approximately decode detected error syndromes rapidly. Specifically, we demonstrate a proof-of-concept that approximate error decoding can be accomplished online in near-term quantum systems by designing and implementing a novel algorithm in superconducting Single Flux Quantum (SFQ) logic technology. This avoids a critical decoding backlog, hidden in all offline decoding schemes, that leads to idle time exponential in the number of T gates in a program [58]. Our design utilizes one SFQ processing module per physical quantum bit. Employing state-of-the-art SFQ synthesis tools, we show that the circuit area, power, and latency are within the constraints of typical, contemporary quantum system designs. Under a pure dephasing error model, the proposed accelerator and AQEC solution is able to expand SQV by factors between 3,402 and 11,163 on expected near-term machines. The decoder achieves a 5% accuracy threshold as well as pseudo-thresholds of approximately 5%, 4.75%, 4.5%, and 3.5% physical error rates for code distances 3, 5, 7, and 9, respectively. Decoding solutions are achieved in a maximum of $\sim$20 nanoseconds on the largest code distances studied. By avoiding the exponential idle time in offline decoders, we achieve a 10x reduction in required code distances to achieve the same logical performance as alternative designs.
Due to the low error tolerance of a qubit, detecting and correcting errors on it is essential for fault-tolerant quantum computing. Surface code (SC) associated with its decoding algorithm is one of the most promising quantum error correction (QEC) methods. QEC needs to be very power-efficient since the power budget is limited inside of a dilution refrigerator for superconducting qubits by which one of the most successful quantum computers (QCs) is built. In this paper, we propose an online-QEC algorithm and its hardware implementation with SFQ based superconducting digital circuits. We design a key building block of the proposed hardware with an SFQ cell library and evaluate it by the SPICE-level simulation. Each logic element is composed of about 3000 Josephson junctions and power consumption is about 2.78μW2.78 \mu \mathrm{W}2.78μW when operating with 2 GHz clock frequency which meets the required decoding speed. Our decoder is simulated on a quantum error simulator for code distances 5 to 13 and achieves a 1.0% accuracy threshold.
Interface circuits are the key components that enable the hybrid integration of superconductor and semiconductor digital electronics. The design requirements of superconductor-semiconductor interface circuits vary depending on the application, such as high-performance classical computing, superconducting quantum computing, and digital signal processing. In this survey, various interface circuits are categorized based on the working principle and structure. The superconducting output drivers are explored, which are capable of converting and amplifying, e.g., single flux quantum (SFQ) voltage pulses, to voltage levels that semiconductor circuits can process. Several trade-offs between circuit- and system-level design parameters are examined. Accordingly, parameters such as the data rate, output voltage, power dissipation, layout area, thermal/heat load of cryogenic cables, and bit-error rate are considered.
The Rapid Single Flux Quantum electronics is a superconducting, naturally digital circuit family which is currently close to getting commercially applied.RSFQ is outstanding by its very low switching energy resulting in a very low power consumption which is the reason for a significant influence on thermal noise.For industrial applications a certain noise immunity is required which is still a challenge especially for circuits of higher complexity.In superconducting electronics resistors are the only on-chip noise sources.We analyzed the influence of each individual resistor in a toggle Flip-Flop circuit to the overall bit-error rate.The shunt resistors of comparator structures are the dominant noise sources and bias resistors have almost no influence.We analyzed in detail the types of thermal introduced switching errors of an toggle Flip-Flop which was optimized with respect to the fabrication yield.Simulation studies were accomplished to investigate the influence of circuit parameters on quality and on quantity of switching errors.By identifying and manipulating the parameters with the most significant influence on the noise susceptibility an enhanced noise immunity of the device can be achieved.The goal is to improve the robustness of RSFQ circuits against the influence of thermal noise for an specific topology by changing the circuit parameters of the device.