Coping with noise in quantum computation poses significant challenges due to its unpredictable nature and the complexities of accurate modeling. This paper presents noise-adaptive folding, a technique that enhances zero-noise extrapolation (ZNE) through the use of adaptive scaling factors based on circuit error measurements. Furthermore, we introduce two filtering methods: one relies on measuring error strength, while the other utilizes statistical filtering to improve the extrapolation process. Comparing our approach with standard ZNE reveals that adaptive scaling factors can be optimized using either a noise model or direct error strength measurements from inverted circuits. The integration of adaptive scaling with filtering techniques leads to notable improvements in expectation-value extrapolation over standard ZNE. Our findings demonstrate that these adaptive methods effectively strengthen error mitigation against noise fluctuations, thereby enhancing the precision and reliability of quantum computations.
Coping with noise in quantum computation poses significant challenges due to its unpredictable nature and the complexities of accurate modeling. This paper presents noise-adaptive folding, a technique that enhances zero-noise extrapolation (ZNE) through the use of adaptive scaling factors based on circuit error measurements. Furthermore, we introduce two filtering methods: one relies on measuring error strength, while the other utilizes statistical filtering to improve the extrapolation process. Comparing our approach with standard ZNE reveals that adaptive scaling factors can be optimized using either a noise model or direct error strength measurements from inverted circuits. The integration of adaptive scaling with filtering techniques leads to notable improvements in expectation-value extrapolation over standard ZNE. Our findings demonstrate that these adaptive methods effectively strengthen error mitigation against noise fluctuations, thereby enhancing the precision and reliability of quantum computations.
Recent hundred-qubit processors represent a significant hardware advancement, but current limitations prevent effective quantum error correction (QEC), necessitating reliance on quantum error mitigation (QEM) to enhance result fidelity from quantum computers. Our paper introduces a noise-aware folding technique that enhances Zero-Noise Extrapolation (ZNE) by leveraging the noise characteristics of target quantum hardware to fold circuits more efficiently. Unlike traditional ZNE approaches assuming uniform error distribution, our method redistributes noise using calibration data based on hardware noise models. By employing a noise-adaptive compilation method combined with our proposed folding mechanism, we enhance the ZNE accuracy of quantum gate-based computing using superconducting quantum computers. This paper highlights the uniqueness of our method, summarizes noise accumulation, presents the scaling algorithm, and compares the reliability of our method with those of existing models using linear extrapolation model. Experimental results show that compared to existing folding methods, our approach achieved up to a 23.6% improvement on quantum computer simulators and up to a 44.8% improvement on real quantum computers, with statistical confidence intervals indicating stable performance gains across circuit scales.
Near term quantum processors operate in a noise dominated regime, motivating error mitigation techniques that recover accurate expectation values without full fault tolerance. Zero Noise Extrapolation (ZNE) is a widely used but biased error mitigation method that lacks rigorous error bounds. Its effective application requires nontrivial technical choices, most notably the selection of noise scaling factors and extrapolation models, making ZNE sensitive to user expertise and often necessitating costly trial and error procedures. Here, we introduce Folding Free Zero Noise Extrapolation (FF-ZNE), a method that removes the need for noise factor selection by achieving effective noise amplification without circuit folding. FF-ZNE exploits isomorphic hardware layouts with distinct native noise profiles, such that executing a fixed circuit across these layouts induces controllable variations in the effective noise strength. Under a depolarizing noise model, we analytically show that the resulting extrapolation admits a fixed linear form, eliminating extrapolator choice and enabling a seamless, user independent mitigation procedure. We further propose two algorithms that identify sets of isomorphic hardware layouts on which a given circuit yields sufficiently distinct expectation values to enable reliable zero noise extrapolation. Experiments on a 133 qubit IBM Quantum device demonstrate that FF-ZNE yields mitigated expectation values with average deviations of ~6% and 4.5% for up to 50 qubit EfficientSU2 (sparse) and Hamiltonian simulation (dense) circuits, respectively. The method is thus scalable and applicable to a broad range of circuits. By eliminating noise factor and extrapolator selection, FF-ZNE transforms zero noise extrapolation from a technique requiring expert tuning into a practical, scalable, and broadly accessible error mitigation method for current quantum hardware.
Zero-noise extrapolation (ZNE) is an increasingly popular technique for mitigating errors in noisy quantum computations without using additional quantum resources. We review the fundamentals of ZNE and propose several improvements to noise scaling and extrapolation, the two key components in the technique. We introduce unitary folding and parameterized noise scaling. These are digital noise scaling frameworks, i.e. one can apply them using only gate-level access common to most quantum instruction sets. We also study different extrapolation methods, including a new adaptive protocol that uses a statistical inference framework. Benchmarks of our techniques show error reductions of 18X to 24X over non-mitigated circuits and demonstrate ZNE's effectiveness at larger qubit numbers than have been tested previously. In addition to presenting new results, this work is a self-contained introduction to the practical use of ZNE by quantum programmers.
Reliable benchmarking of Quantum Error Mitigation (QEM) requires distinguishing genuine improvements from artefacts of the post-processing arithmetic. In this paper, we expose a failure mode in Richardson Zero-Noise Extrapolation (ZNE), a widely used technique routinely (and often implicitly) relied upon in benchmarks and experiments. When noise amplification operates beyond usable signals - a regime that is quickly reached on current hardware for non-trivial circuits - we show that the extrapolation no longer reflects the underlying physics, but collapses into a fixed rescaling of a single noisy measurement, producing a bogus apparent improvement that is independent of noise amplification. This poses a rarely considered threat to the validity of many empirical evaluations in quantum computing.
Measurements on real hardware (IQM Euro-Q-Exa) confirm this collapse with ordinary folding alone: as circuit depth erodes the signal, the reported estimate decouples from the truth and overshoots the ideal by up to 21%. We further introduce a matched-cost "garbage-folding" negative control that carries no usable signal yet reports a larger apparent improvement than genuine folding - showing that the magnitude of an improvement is not evidence of its correctness - alongside a zero-cost check flagging the artefact from data a benchmark already holds. We distil both into a short reporting checklist for ZNE benchmarks.
A common approach to deal with gate errors in modern quantum-computing hardware is zero-noise extrapolation. By artificially amplifying errors and extrapolating the expectation values obtained with different error strengths towards the zero-error (zero-noise) limit, the technique aims at rectifying errors in noisy quantum computing systems. For accurate extrapolation, it is essential to know the exact factors of the noise amplification. In this article, we propose a simple method for estimating the strength of errors occurring in a quantum circuit and demonstrate improved extrapolation results. The method determines the error strength for a circuit by appending to it the inverted circuit and measuring the probability of the initial state. The estimation of error strengths is easy to implement for arbitrary circuits and does not require previous characterization of noise properties. We compare this method with the conventional zero-noise extrapolation method and show that our method leads to a more accurate calculation of expectation values on current quantum hardware, showcasing its suitability for near-term quantum computing applications. Published by the American Physical Society 2024
As quantum computing advances towards practical applications, reducing errors remains a crucial frontier for developing near-term devices. Errors in the quantum gates and quantum state readout could result in noisy circuits, which would prevent the acquisition of the exact expectation values of the observables. Although ultimate robustness to errors is known to be achievable by quantum error correction-based fault-tolerant quantum computing, its successful implementation demands large-scale quantum processors with low average error rates that are not yet widely available. In contrast, quantum error mitigation (QEM) offers more immediate and practical techniques, which do not require extensive resources and can be readily applied to existing quantum devices to improve the accuracy of the expectation values. Here, we report the implementation of a zero-noise extrapolation-based error mitigation technique on a silicon spin qubit platform. This technique has recently been successfully demonstrated for other platforms such as superconducting qubits, trapped-ion qubits, and photonic processors. We first explore three methods for amplifying noise on a silicon spin qubit: global folding, local folding, and pulse stretching, using a standard randomized benchmarking protocol. We then apply global folding-based zero-noise extrapolation to the state tomography and achieve a state fidelity of 99.96% (98.52%), compared to the unmitigated fidelity of 75.82% (82.16%) for different preparation states. The results show that the zero-noise extrapolation technique is a versatile approach that is generally adaptable to quantum computing platforms with different noise characteristics through appropriate noise amplification methods.