Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2502.20955 · Physical Review Applied

Digitally controlled conveyor-belt spin shuttling in silicon for large-scale quantum computation

Ryo Nagai, Takashi Takemoto, Yusuke Wachi, Hiroyuki Mizuno

Published Nov 14, 2025• 0 citations
arXivHTMLPDF

Abstract

We propose a digitally controlled conveyor-belt shuttling method for silicon-based quantum processors, addressing the scalability challenges of conventional analog sinusoidal implementations. By placing a switch matrix and low-pass filters in a cryogenic environment, our approach synthesizes near-sinusoidal waveforms from a limited number of dc voltage levels. Simulation results demonstrate that the proposed method achieves fidelity comparable to analog methods while significantly reducing wiring overhead and power dissipation. Moreover, the design offers robustness against device-level variations, enabling large-scale integration of high-fidelity spin shuttling for quantum error correction.

DOI
10.1103/ng22-2cgg

Related papers

Concepts and prototyping for scalable quantum computing based on conveyor-mode single-electron shuttling

Matthias Künne

Universal quantum computing promises solutions to a wide range of problems of significant scientific and socioeconomic impact that are computationally intractable using classical hardware. Since physical qubits are inherently noisy and prone to decoherence, realizing a sufficient number of logical qubits to unlock practically relevant problem classes will likely require quantum error correction, resulting in an overhead of millions of physical qubits. Among all competing hardware platforms, spin qubits in gate-defined quantum dots are uniquely positioned: single- and two-qubit gate fidelities routinely exceed the error-correction threshold, and the experimentally proven compatibility with industrial-grade semiconductor manufacturing may enable millions of qubits on a single chip. Realizing this potential, however, requires quantum processor architectures that scale to large qubit numbers with two‑dimensional connectivity while maintaining high operational fidelities. Building on the theoretical feasibility of high‑fidelity spin‑coherent electron shuttling, the SpinBus architecture is introduced to enable scaling to application-relevant qubit numbers. The SpinBus architecture leverages the conveyor-mode shuttling device named Quantum Bus (QuBus) for coherent qubit coupling over micron‑scale distances to accommodate, at the level of the quantum processor chip, wiring fan‑out and locally integrated control electronics at cryogenic temperatures. Device simulations for all relevant operations in the Si/SiGe platform validate operation fidelities exceeding 99 % as well as compatibility with the requirements of established semiconductor patterning technology. Control with room‑temperature electronics plausibly supports at least 144 qubits, while substantially larger quantum processor sizes are conceivable using cryogenic control electronics. For the experimental realization of QuBus devices, a novel high‑yield multilayer electron-beam lithography process, which can readily be adapted to different device layouts, was developed to fabricate the required > 100 aligned metallic gate electrodes. Benchmarking with a semiconductor industry‑inspired methodology and inspection of > 100 devices demonstrated 99 % gate fabrication yield and at least 5 nm overlay accuracy. Utilizing GaAs/(Al,Ga)As QuBus prototype devices with a 7 µm shuttling channel for quantized-current experiments validated key criteria for conveyor-mode shuttling, in particular linear current scaling for operation frequencies up to 40 MHz, and provided preliminary evidence consistent with quantized conveyor-mode electron transfer. These results support the viability of conveyor-mode shuttling for qubit coupling and indicate the suitability of QuBus devices for metrological applications.

•Jan 1, 2026•0 citations

Valley-Aware Optimal Control of Spin Shuttling Using Cryogenic Integrated Electronics

Pau Dietz Romero, Nermine Chaabani, Lammert Duipmans +4 more

Electron shuttling is emerging as a key mechanism for enabling long-range coupling in scalable spin-qubit architectures. Bringing shuttling waveform generation into the cryostat can improve scalability, but imposes strict area and power constraints on the control electronics. Concurrently, shuttling in Si/SiGe is further limited by a spatially varying valley splitting that induces spin--valley mixing and degrades coherence. Here, we make three contributions that address these limitations jointly: (i) an end-to-end co-simulation framework that combines disorder-informed valley maps with transistor-level cryogenic circuit simulations including electronic noise; (ii) a fully integrated cryogenic shuttling-signal generator tailored to velocity modulation, enabling period-wise waveform shaping through discrete circuit settings stored in on-chip memory; and (iii) a noise-aware optimization procedure that tunes only these implementable circuit controls, using one of four discrete resistor settings per period, to generate high-fidelity shuttling sequences. Across simulated valley and noise realizations in our co-simulation framework, the optimized velocity-modulation waveforms improve transport performance, achieving an average shuttling fidelity of $99.99 \pm 0.007\%$ at $v_{\mathrm{avg}} = 20~\mathrm{m\,s^{-1}}$ over a distance of $10~μ\mathrm{m}$, while maintaining active analog power consumption in the tens of $μ\mathrm{W}$ during shuttling. This validates on-chip storage and replay of optimized control settings as a practical strategy to mitigate valley disorder in scalable shuttling architectures.

quant-pharXiv:2604.20482•Apr 23, 2026

A system design approach toward integrated cryogenic quantum control systems

Mridula Prathapan, Peter R. Müeller, David Heim +8 more

In this paper, we provide a system level perspective on the design of control electronics for large scale quantum systems. Quantum computing systems with high-fidelity control and readout, coherent coupling, calibrated gates, and reconfigurable circuits with low error rates are expected to have superior quantum volumes. Cryogenic CMOS plays a crucial role in the realization of scalable quantum computers, by minimizing the feature size, lowering the cost, power consumption, and implementing low latency error correction. Our approach toward achieving scalable feed-back based control systems includes the design of memory based arbitrary waveform generators (AWG’s), wide band radio frequency analog to digital converters, integrated amplifier chain, and state discriminators that can be synchronized with gate sequences. Digitally assisted designs, when implemented in an advanced CMOS node such as 7 nm can reap the benefits of low power due to scaling. A qubit readout chain demands several amplification stages before the digitizer. We propose the co-integration of our in-house developed InP HEMT LNAs with CMOS LNA stages to achieve the required gain at the digitizer input with minimal area. Our approach using high impedance matching between the HEMT LNA and the cryogenic CMOS receiver can relax the design constraints of an inverter-based CMOS LNA, paving the way toward a fully integrated qubit readout chain. The qubit state discriminator consists of a digital signal processor that computes the qubit state from the digitizer output and a pre-determined threshold. The proposed system realizes feedback-based optimal control for error mitigation and reduction of the required data rate through the serial interface to room temperature electronics.

arXiv:2211.02081•IEEE Workshop on Low Temperature Electronics (WOLTE)•Jun 6, 2022•4 citations

Conveyor-mode electron shuttling through a T-junction in Si/SiGe

Max Beer, Ran Xue, Lennart Deda +6 more

Conveyor-mode shuttling in gated Si/SiGe devices enables adiabatic transfer of single electrons, electron patterns and spin qubits confined in quantum dots across several microns with a scalable number of signal lines. To realize their full potential, linear shuttle lanes must connect into a two-dimensional grid with controllable routing. We introduce a T-junction device linking two independently driven shuttle lanes. Electron routing across the junction requires no extra control lines beyond the four channels per conveyor belt. We measure an inter-lane charge transfer fidelity of $F = 100.0000000^{+0}_{-9\times 10^{-7}}\,\%$ at an instantaneous electron velocity of $270\,\mathrm{mm}\,\mathrm{s}^{-1}$. The filling of 54 quantum dots is controlled by simple atomic pulses, allowing us to swap electron patterns, laying the groundwork for a native spin-qubit SWAP gate. This T-junction establishes a path towards scalable, two-dimensional quantum computing architectures with flexible spin qubit routing for quantum error correction.

cond-mat.mes-hallCross-listedarXiv:2601.03942•Jan 8, 2026

A digitally controlled silicon quantum processing unit

Members of the HRL Quantum Team, Collaborators, : +255 more

Commercially-relevant quantum computers will require large numbers of high-performing qubits that can be manufactured, integrated, and controlled at scale. Silicon exchange-only (EO) qubits are a strong candidate modality due to their control-signal simplicity and compatibility with advanced semiconductor manufacturing, but questions remain around the achievability of sufficiently low noise and a scalable control and wiring solution. Here we introduce a quantum processing unit composed of a custom-designed cryogenic CMOS controller, a novel high-density superconducting ribbon cable, and a low-noise EO qubit device. The quantum chip features a three-rail array of 54 exchange-coupled quantum dots, configurable to host up to 18 EO qubits. We integrate and use these components to demonstrate qubit performance for both single-qubit and entangling operations that advances the EO state of the art by an order of magnitude. We further validate this system by implementing a distance-5 repetition code and a quantum error detecting code then make detailed comparisons with simulations. Our approach facilitates a utility-scale quantum computer with manageable operational and capital requirements.

quant-pharXiv:2604.16216•Nature•Apr 20, 2026•5 citations

Conveyor-mode single-electron shuttling in Si/SiGe for a scalable quantum computing architecture

Inga Seidler, Tom Struck, Ran Xue +4 more

Abstract Small spin-qubit registers defined by single electrons confined in Si/SiGe quantum dots operate successfully and connecting these would permit scalable quantum computation. Shuttling the qubit carrying electrons between registers is a natural choice for high-fidelity coherent links provided the overhead of control signals stays moderate. Our proof-of-principle demonstrates shuttling of a single electron by a propagating wave-potential in an electrostatically defined 420 nm long Si/SiGe quantum-channel. This conveyor-mode shuttling approach requires independent from its length only four sinusoidal control signals. We discuss the tuning of the signal parameters, detect the smoothness of the electron motion enabling the mapping of potential disorder and observe a high single-electron shuttling fidelity of 99.42 ± 0.02% including a reversal of direction. Our shuttling device can be readily embedded in industrial fabrication of Si/SiGe qubit chips and paves the way to solving the signal-fanout problem for a fully scalable semiconductor quantum-computing architecture.

arXiv:2108.00879•npj Quantum Information•Aug 30, 2022•96 citations
We propose a digitally controlled conveyor-belt shuttling method for silicon-based quantum processors, addressing the scalability challenges of conventional analog sinusoidal implementations. By placing a switch matrix and low-pass filters in a cryogenic environment, our approach synthesizes near-sinusoidal waveforms from a limited number of dc voltage levels. Simulation results demonstrate that the proposed method achieves fidelity comparable to analog methods while significantly reducing wiring overhead and power dissipation. Moreover, the design offers robustness against device-level variations, enabling large-scale integration of high-fidelity spin shuttling for quantum error correction.
Universal quantum computing promises solutions to a wide range of problems of significant scientific and socioeconomic impact that are computationally intractable using classical hardware. Since physical qubits are inherently noisy and prone to decoherence, realizing a sufficient number of logical qubits to unlock practically relevant problem classes will likely require quantum error correction, resulting in an overhead of millions of physical qubits. Among all competing hardware platforms, spin qubits in gate-defined quantum dots are uniquely positioned: single- and two-qubit gate fidelities routinely exceed the error-correction threshold, and the experimentally proven compatibility with industrial-grade semiconductor manufacturing may enable millions of qubits on a single chip. Realizing this potential, however, requires quantum processor architectures that scale to large qubit numbers with two‑dimensional connectivity while maintaining high operational fidelities. Building on the theoretical feasibility of high‑fidelity spin‑coherent electron shuttling, the SpinBus architecture is introduced to enable scaling to application-relevant qubit numbers. The SpinBus architecture leverages the conveyor-mode shuttling device named Quantum Bus (QuBus) for coherent qubit coupling over micron‑scale distances to accommodate, at the level of the quantum processor chip, wiring fan‑out and locally integrated control electronics at cryogenic temperatures. Device simulations for all relevant operations in the Si/SiGe platform validate operation fidelities exceeding 99 % as well as compatibility with the requirements of established semiconductor patterning technology. Control with room‑temperature electronics plausibly supports at least 144 qubits, while substantially larger quantum processor sizes are conceivable using cryogenic control electronics. For the experimental realization of QuBus devices, a novel high‑yield multilayer electron-beam lithography process, which can readily be adapted to different device layouts, was developed to fabricate the required > 100 aligned metallic gate electrodes. Benchmarking with a semiconductor industry‑inspired methodology and inspection of > 100 devices demonstrated 99 % gate fabrication yield and at least 5 nm overlay accuracy. Utilizing GaAs/(Al,Ga)As QuBus prototype devices with a 7 µm shuttling channel for quantized-current experiments validated key criteria for conveyor-mode shuttling, in particular linear current scaling for operation frequencies up to 40 MHz, and provided preliminary evidence consistent with quantized conveyor-mode electron transfer. These results support the viability of conveyor-mode shuttling for qubit coupling and indicate the suitability of QuBus devices for metrological applications.
Electron shuttling is emerging as a key mechanism for enabling long-range coupling in scalable spin-qubit architectures. Bringing shuttling waveform generation into the cryostat can improve scalability, but imposes strict area and power constraints on the control electronics. Concurrently, shuttling in Si/SiGe is further limited by a spatially varying valley splitting that induces spin--valley mixing and degrades coherence. Here, we make three contributions that address these limitations jointly: (i) an end-to-end co-simulation framework that combines disorder-informed valley maps with transistor-level cryogenic circuit simulations including electronic noise; (ii) a fully integrated cryogenic shuttling-signal generator tailored to velocity modulation, enabling period-wise waveform shaping through discrete circuit settings stored in on-chip memory; and (iii) a noise-aware optimization procedure that tunes only these implementable circuit controls, using one of four discrete resistor settings per period, to generate high-fidelity shuttling sequences. Across simulated valley and noise realizations in our co-simulation framework, the optimized velocity-modulation waveforms improve transport performance, achieving an average shuttling fidelity of 99.99±0.007%99.99 \pm 0.007\%99.99±0.007% at vavg=20 m s−1v_{\mathrm{avg}} = 20~\mathrm{m\,s^{-1}}vavg​=20 ms−1 over a distance of 10 μm10~μ\mathrm{m}10 μm, while maintaining active analog power consumption in the tens of μWμ\mathrm{W}μW during shuttling. This validates on-chip storage and replay of optimized control settings as a practical strategy to mitigate valley disorder in scalable shuttling architectures.
In this paper, we provide a system level perspective on the design of control electronics for large scale quantum systems. Quantum computing systems with high-fidelity control and readout, coherent coupling, calibrated gates, and reconfigurable circuits with low error rates are expected to have superior quantum volumes. Cryogenic CMOS plays a crucial role in the realization of scalable quantum computers, by minimizing the feature size, lowering the cost, power consumption, and implementing low latency error correction. Our approach toward achieving scalable feed-back based control systems includes the design of memory based arbitrary waveform generators (AWG’s), wide band radio frequency analog to digital converters, integrated amplifier chain, and state discriminators that can be synchronized with gate sequences. Digitally assisted designs, when implemented in an advanced CMOS node such as 7 nm can reap the benefits of low power due to scaling. A qubit readout chain demands several amplification stages before the digitizer. We propose the co-integration of our in-house developed InP HEMT LNAs with CMOS LNA stages to achieve the required gain at the digitizer input with minimal area. Our approach using high impedance matching between the HEMT LNA and the cryogenic CMOS receiver can relax the design constraints of an inverter-based CMOS LNA, paving the way toward a fully integrated qubit readout chain. The qubit state discriminator consists of a digital signal processor that computes the qubit state from the digitizer output and a pre-determined threshold. The proposed system realizes feedback-based optimal control for error mitigation and reduction of the required data rate through the serial interface to room temperature electronics.
Conveyor-mode shuttling in gated Si/SiGe devices enables adiabatic transfer of single electrons, electron patterns and spin qubits confined in quantum dots across several microns with a scalable number of signal lines. To realize their full potential, linear shuttle lanes must connect into a two-dimensional grid with controllable routing. We introduce a T-junction device linking two independently driven shuttle lanes. Electron routing across the junction requires no extra control lines beyond the four channels per conveyor belt. We measure an inter-lane charge transfer fidelity of F=100.0000000−9×10−7+0 %F = 100.0000000^{+0}_{-9\times 10^{-7}}\,\%F=100.0000000−9×10−7+0​% at an instantaneous electron velocity of 270 mm s−1270\,\mathrm{mm}\,\mathrm{s}^{-1}270mms−1. The filling of 54 quantum dots is controlled by simple atomic pulses, allowing us to swap electron patterns, laying the groundwork for a native spin-qubit SWAP gate. This T-junction establishes a path towards scalable, two-dimensional quantum computing architectures with flexible spin qubit routing for quantum error correction.
Commercially-relevant quantum computers will require large numbers of high-performing qubits that can be manufactured, integrated, and controlled at scale. Silicon exchange-only (EO) qubits are a strong candidate modality due to their control-signal simplicity and compatibility with advanced semiconductor manufacturing, but questions remain around the achievability of sufficiently low noise and a scalable control and wiring solution. Here we introduce a quantum processing unit composed of a custom-designed cryogenic CMOS controller, a novel high-density superconducting ribbon cable, and a low-noise EO qubit device. The quantum chip features a three-rail array of 54 exchange-coupled quantum dots, configurable to host up to 18 EO qubits. We integrate and use these components to demonstrate qubit performance for both single-qubit and entangling operations that advances the EO state of the art by an order of magnitude. We further validate this system by implementing a distance-5 repetition code and a quantum error detecting code then make detailed comparisons with simulations. Our approach facilitates a utility-scale quantum computer with manageable operational and capital requirements.
Abstract Small spin-qubit registers defined by single electrons confined in Si/SiGe quantum dots operate successfully and connecting these would permit scalable quantum computation. Shuttling the qubit carrying electrons between registers is a natural choice for high-fidelity coherent links provided the overhead of control signals stays moderate. Our proof-of-principle demonstrates shuttling of a single electron by a propagating wave-potential in an electrostatically defined 420 nm long Si/SiGe quantum-channel. This conveyor-mode shuttling approach requires independent from its length only four sinusoidal control signals. We discuss the tuning of the signal parameters, detect the smoothness of the electron motion enabling the mapping of potential disorder and observe a high single-electron shuttling fidelity of 99.42 ± 0.02% including a reversal of direction. Our shuttling device can be readily embedded in industrial fabrication of Si/SiGe qubit chips and paves the way to solving the signal-fanout problem for a fully scalable semiconductor quantum-computing architecture.