Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2412.15816 · Physical Review A

Optimization of two-qubit gates in tunable-coupler architectures using single-flux-quantum control

Boyan T. Torosov, Bohdan Kulchytskyy, Florian Hopfmueller, John Gunderson, Xiangzhou Kong, Pooya Ronagh

Published Jul 18, 2025• 1 citation
arXivHTMLPDF

Abstract

We present a gradient-based method to construct high-fidelity, two-qubit quantum gates in a system consisting of two transmon qubits coupled via a tunable coupler. In particular, we focus on single-flux-quantum pulses as a promising and scalable alternative to traditional control schemes that use microwave electronics. We develop a continuous embedding scheme to optimize these discrete pulses, taking advantage of autodifferentiation of our model. This approach allows us to achieve fSim-type gates with average gate fidelities on the order of 99.99% and controlled-$Z$ and controlled-not gates with fidelities above 99.9%. Furthermore, we provide an alternative semianalytical construction of these gates via an exact decomposition using a pair of fSim gates, which leads to the reduction in memory required to store the associated pulse sequences.

DOI
10.1103/9cvc-p9ww

Related papers

High-fidelity two-qubit gates with transmon qubits using bipolar flux pulses and tunable couplers

Nikita S. Smirnov, Aleksei R. Matanin, Аnton I. Ivanov +15 more

High-fidelity two-qubit gates are essential for scalable quantum computing. We present a scheme based on superconducting transmon qubits and a control pulse delivery protocol that enables arbitrary controlled-phase gates modulated solely by an independent arbitrary waveform generator pulse. We combined a tunable coupler design with bipolar flux-pulsing to demonstrate a high-fidelity gate with a peak performance of $99.5\%$. Our gates inherit the advantages of both approaches: minimal residual ZZ coupling, built-in echo-like low-frequency noise protection, and time-scale control pulse reproducibility, while remaining easy to calibrate. We optimize the system energy levels to mitigate leakage to the coupler and suppress residual interactions. Numerical simulations of the scheme as three qutrits indicate that an error below $1 \times 10^{-3}$ is achievable. We confirm the scalability potential of the proposed scheme on high-fidelity 4-qubit and 8-qubit quantum processors

arXiv:2509.04965•Physical Review Applied•Jul 13, 2026•0 citations

High fidelity two-qubit gates on fluxoniums using a tunable coupler

Ilya N. Moskalenko, Ilya A. Simakov, Nikolay N. Abramov +7 more

Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.

arXiv:2203.16302•npj Quantum Information•Nov 8, 2022•116 citations

Fast CZ gate in hybrid fluxonium-transmon systems with tunable couplers

Peng Xu, Yunlong Wang, Yuechen Mu +4 more

Hybrid superconducting architectures combining different types of qubits offer a promising platform for exploiting their complementary advantages, yet high-fidelity entangling gates remain challenging because of strong nonlinearities and residual qubit-qubit interactions. Here, we propose a high-fidelity controlled-Z (CZ) gate for a hybrid circuit comprising a fluxonium qubit, a fixed-frequency transmon qubit, and a flux-tunable transmon coupler. By modulating only the external magnetic flux applied to the coupler, the qubit-qubit interaction is dynamically engineered for conditional-phase accumulation while the residual interaction is suppressed at idle, mitigating spectator-induced errors. We employ a low-dimensional Fourier-cosine pulse parameterization and a physically motivated cost function to independently suppress conditional-phase errors and leakage from the computational subspace. Numerical simulations demonstrate that a microwave-free CZ gate can be realized within $25 \mathrm{ns}$, with an average gate fidelity exceeding $99.99\%$ and leakage below $10^{-5}$. Using experimentally relevant superconducting-qubit parameters and accounting for decoherence, the proposed scheme maintains a CZ-gate fidelity of approximately $99.9\%$. We further extend the analysis to larger coupled architectures and find that the CZ-gate infidelity remains below $10^{-4}$ in the presence of spectator qubits. These results establish single-parameter flux control as a simple and robust approach for realizing high-fidelity entangling gates in heterogeneous superconducting quantum architectures.

quant-pharXiv:2609.14197•Sep 15, 2026•0 citations

Optimization of High-Fidelity Single-Qubit Gates for Fluxoniums Using Single-Flux Quantum Control

Maxime Lapointe-Major, Boyan Torosov, Bohdan Kulchytskyy +1 more

We present a gradient-based method to construct memory-efficient, high-fidelity, single-qubit gates for fluxonium qubits. These gates are constructed using a sequence of single-flux quantum (SFQ) pulses that are sent to the qubit through either capacitive or inductive coupling. The schedule of SFQ pulses is constructed with an on-ramp and an off-ramp applied prior to and after a pulse train, where the pulses are spaced at intervals equal to the qubit period. We reduce the optimization problem to the scheduling of a fixed number of SFQ pulses in the on-ramp and solve it by relaxing the discretization constraint of the SFQ clock as an intermediate step, allowing the use of the Broyden-Fletcher-Goldfarb-Shanno optimizer. Using this approach, gate fidelities of 99.99 % can be achieved for inductive coupling and 99.9 % for capacitive coupling, with leakage being the main source of coherent errors for both approaches.

quant-pharXiv:2511.14746•Nov 19, 2025•0 citations

High-Fidelity, Frequency-Flexible Two-Qubit Fluxonium Gates with a Transmon Coupler

Leon Ding, Max Hays, Youngkyu Sung +16 more

We propose and demonstrate an architecture for fluxonium-fluxonium two-qubit gates mediated by transmon couplers (FTF, for fluxonium-transmon-fluxonium).Relative to architectures that exclusively rely on a direct coupling between fluxonium qubits, FTF enables stronger couplings for gates using noncomputational states while simultaneously suppressing the static controlled-phase entangling rate (ZZ) down to kilohertz levels, all without requiring strict parameter matching.Here, we implement FTF with a flux-tunable transmon coupler and demonstrate a microwave-activated controlled-Z (CZ) gate whose operation frequency can be tuned over a 2-GHz range, adding frequency allocation freedom for FTFs in larger systems.Across this range, state-of-the-art CZ gate fidelities are observed over many bias points and reproduced across the two devices characterized in this work.After optimizing both the operation frequency and the gate duration, we achieve peak CZ fidelities in the 99.85%-99.9%range.Finally, we implement model-free reinforcement learning of the pulse parameters to boost the mean gate fidelity up to 99.922% Æ 0.009%, averaged over roughly an hour between scheduled training runs.Beyond the microwave-activated CZ gate we present here, FTF can be applied to a variety of other fluxonium gate schemes to improve gate fidelities and passively reduce unwanted ZZ interactions.

arXiv:2304.06087•Physical Review X•Sep 25, 2023•150 citations

High-precision pulse calibration of tunable couplers for high-fidelity two-qubit gates in superconducting quantum processors

Tian-Ming Li, Jiachi Zhang, Bing-Jie Chen +23 more

For superconducting quantum processors, stable high-fidelity two-qubit operations depend on precise flux control of the tunable coupler. However, the pulse distortion poses a significant challenge to the control precision. Current calibration methods, which often rely on microwave crosstalk or additional readout resonators for coupler excitation and readout, tend to be cumbersome and inefficient, especially when couplers only have flux control. Here, we introduce and experimentally validate a pulse calibration scheme that exploits the strong coupling between qubits and couplers, eliminating the need for extra coupler readout and excitation. Our method directly measures the short-time and long-time step responses of the coupler flux pulse transient, enabling us to apply predistortion to subsequent signals using fast Fourier transformation and deconvolution. This approach not only simplifies the calibration process, but also significantly improves the precision and stability of the flux control. We demonstrate the efficacy of our method through the implementation of diabatic controlled-$Z$ (cz) and $i$swap gates with fidelities of $99.61\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.04\mathrm{%}$ and $99.82\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.02\mathrm{%}$, respectively, as well as a series of diabatic controlled-phase gates with high fidelities characterized by cross-entropy benchmarking. The consistency and robustness of our technique are further validated by the reduction in pulse distortion and phase error observed across multilayer cz gates. These results underscore the potential of our calibration and predistortion method to enhance the performance of two-qubit gates in superconducting quantum processors.

arXiv:2410.15041•Physical Review Applied•Feb 21, 2025•15 citations
We present a gradient-based method to construct high-fidelity, two-qubit quantum gates in a system consisting of two transmon qubits coupled via a tunable coupler. In particular, we focus on single-flux-quantum pulses as a promising and scalable alternative to traditional control schemes that use microwave electronics. We develop a continuous embedding scheme to optimize these discrete pulses, taking advantage of autodifferentiation of our model. This approach allows us to achieve fSim-type gates with average gate fidelities on the order of 99.99% and controlled-ZZZ and controlled-not gates with fidelities above 99.9%. Furthermore, we provide an alternative semianalytical construction of these gates via an exact decomposition using a pair of fSim gates, which leads to the reduction in memory required to store the associated pulse sequences.
High-fidelity two-qubit gates are essential for scalable quantum computing. We present a scheme based on superconducting transmon qubits and a control pulse delivery protocol that enables arbitrary controlled-phase gates modulated solely by an independent arbitrary waveform generator pulse. We combined a tunable coupler design with bipolar flux-pulsing to demonstrate a high-fidelity gate with a peak performance of 99.5%99.5\%99.5%. Our gates inherit the advantages of both approaches: minimal residual ZZ coupling, built-in echo-like low-frequency noise protection, and time-scale control pulse reproducibility, while remaining easy to calibrate. We optimize the system energy levels to mitigate leakage to the coupler and suppress residual interactions. Numerical simulations of the scheme as three qutrits indicate that an error below 1×10−31 \times 10^{-3}1×10−3 is achievable. We confirm the scalability potential of the proposed scheme on high-fidelity 4-qubit and 8-qubit quantum processors
Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.
Hybrid superconducting architectures combining different types of qubits offer a promising platform for exploiting their complementary advantages, yet high-fidelity entangling gates remain challenging because of strong nonlinearities and residual qubit-qubit interactions. Here, we propose a high-fidelity controlled-Z (CZ) gate for a hybrid circuit comprising a fluxonium qubit, a fixed-frequency transmon qubit, and a flux-tunable transmon coupler. By modulating only the external magnetic flux applied to the coupler, the qubit-qubit interaction is dynamically engineered for conditional-phase accumulation while the residual interaction is suppressed at idle, mitigating spectator-induced errors. We employ a low-dimensional Fourier-cosine pulse parameterization and a physically motivated cost function to independently suppress conditional-phase errors and leakage from the computational subspace. Numerical simulations demonstrate that a microwave-free CZ gate can be realized within 25ns25 \mathrm{ns}25ns, with an average gate fidelity exceeding 99.99%99.99\%99.99% and leakage below 10−510^{-5}10−5. Using experimentally relevant superconducting-qubit parameters and accounting for decoherence, the proposed scheme maintains a CZ-gate fidelity of approximately 99.9%99.9\%99.9%. We further extend the analysis to larger coupled architectures and find that the CZ-gate infidelity remains below 10−410^{-4}10−4 in the presence of spectator qubits. These results establish single-parameter flux control as a simple and robust approach for realizing high-fidelity entangling gates in heterogeneous superconducting quantum architectures.
We present a gradient-based method to construct memory-efficient, high-fidelity, single-qubit gates for fluxonium qubits. These gates are constructed using a sequence of single-flux quantum (SFQ) pulses that are sent to the qubit through either capacitive or inductive coupling. The schedule of SFQ pulses is constructed with an on-ramp and an off-ramp applied prior to and after a pulse train, where the pulses are spaced at intervals equal to the qubit period. We reduce the optimization problem to the scheduling of a fixed number of SFQ pulses in the on-ramp and solve it by relaxing the discretization constraint of the SFQ clock as an intermediate step, allowing the use of the Broyden-Fletcher-Goldfarb-Shanno optimizer. Using this approach, gate fidelities of 99.99 % can be achieved for inductive coupling and 99.9 % for capacitive coupling, with leakage being the main source of coherent errors for both approaches.
We propose and demonstrate an architecture for fluxonium-fluxonium two-qubit gates mediated by transmon couplers (FTF, for fluxonium-transmon-fluxonium).Relative to architectures that exclusively rely on a direct coupling between fluxonium qubits, FTF enables stronger couplings for gates using noncomputational states while simultaneously suppressing the static controlled-phase entangling rate (ZZ) down to kilohertz levels, all without requiring strict parameter matching.Here, we implement FTF with a flux-tunable transmon coupler and demonstrate a microwave-activated controlled-Z (CZ) gate whose operation frequency can be tuned over a 2-GHz range, adding frequency allocation freedom for FTFs in larger systems.Across this range, state-of-the-art CZ gate fidelities are observed over many bias points and reproduced across the two devices characterized in this work.After optimizing both the operation frequency and the gate duration, we achieve peak CZ fidelities in the 99.85%-99.9%range.Finally, we implement model-free reinforcement learning of the pulse parameters to boost the mean gate fidelity up to 99.922% Æ 0.009%, averaged over roughly an hour between scheduled training runs.Beyond the microwave-activated CZ gate we present here, FTF can be applied to a variety of other fluxonium gate schemes to improve gate fidelities and passively reduce unwanted ZZ interactions.
For superconducting quantum processors, stable high-fidelity two-qubit operations depend on precise flux control of the tunable coupler. However, the pulse distortion poses a significant challenge to the control precision. Current calibration methods, which often rely on microwave crosstalk or additional readout resonators for coupler excitation and readout, tend to be cumbersome and inefficient, especially when couplers only have flux control. Here, we introduce and experimentally validate a pulse calibration scheme that exploits the strong coupling between qubits and couplers, eliminating the need for extra coupler readout and excitation. Our method directly measures the short-time and long-time step responses of the coupler flux pulse transient, enabling us to apply predistortion to subsequent signals using fast Fourier transformation and deconvolution. This approach not only simplifies the calibration process, but also significantly improves the precision and stability of the flux control. We demonstrate the efficacy of our method through the implementation of diabatic controlled-ZZZ (cz) and iiiswap gates with fidelities of $99.61\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.04\mathrm{%}$ and $99.82\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.02\mathrm{%}$, respectively, as well as a series of diabatic controlled-phase gates with high fidelities characterized by cross-entropy benchmarking. The consistency and robustness of our technique are further validated by the reduction in pulse distortion and phase error observed across multilayer cz gates. These results underscore the potential of our calibration and predistortion method to enhance the performance of two-qubit gates in superconducting quantum processors.