Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2509.04965 · Physical Review Applied

High-fidelity two-qubit gates with transmon qubits using bipolar flux pulses and tunable couplers

Nikita S. Smirnov, Aleksei R. Matanin, Аnton I. Ivanov, Vladimir V. Echeistov, Nikita D. Korshakov, Elizaveta I. Malevannaya, Victor I. Polozov, Bogdan K. Getmanov, Anastasia A. Solovieva, Daria A. Moskaleva, Elizaveta A. Krivko, Dmitry O. Moskalev, Dmitry A. Mikhalin, Igor S. Korobenko, Denis E. Shirokov, Ilya A. Ryzhikov, Alexander V. Andriyash, Ilya A. Rodionov

Published Jul 13, 2026• 0 citations
arXivHTMLPDF

Abstract

High-fidelity two-qubit gates are essential for scalable quantum computing. We present a scheme based on superconducting transmon qubits and a control pulse delivery protocol that enables arbitrary controlled-phase gates modulated solely by an independent arbitrary waveform generator pulse. We combined a tunable coupler design with bipolar flux-pulsing to demonstrate a high-fidelity gate with a peak performance of $99.5\%$. Our gates inherit the advantages of both approaches: minimal residual ZZ coupling, built-in echo-like low-frequency noise protection, and time-scale control pulse reproducibility, while remaining easy to calibrate. We optimize the system energy levels to mitigate leakage to the coupler and suppress residual interactions. Numerical simulations of the scheme as three qutrits indicate that an error below $1 \times 10^{-3}$ is achievable. We confirm the scalability potential of the proposed scheme on high-fidelity 4-qubit and 8-qubit quantum processors

DOI
10.1103/ghq6-pyjw

Related papers

High fidelity two-qubit gates on fluxoniums using a tunable coupler

Ilya N. Moskalenko, Ilya A. Simakov, Nikolay N. Abramov +7 more

Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.

arXiv:2203.16302•npj Quantum Information•Nov 8, 2022•116 citations

Three-mode tunable coupler for superconducting two-qubit gates

Elena Yu. Egorova, Alena S. Kazmina, Ilya A. Simakov +7 more

Building a scalable universal high-performance quantum processor is a formidable challenge. In particular, the problem of realizing fast high-perfomance two-qubit gates of high-fidelity remains needful. Here we propose a building block for a scalable quantum processor consisting of two transmons and a tunable three-mode coupler allowing for a ZZ interaction control. We experimentally demonstrate the native CZ gate with the pulse duration of 60 ns achieving the two-qubit gate fidelity above 98%, limited mostly by qubit coherence time. Numerical simulations show that by optimizing the gate duration the fidelity can be pushed over 99.97%.

arXiv:2405.10886•Physical Review Applied•Jun 5, 2025•5 citations

Fast CZ gate in hybrid fluxonium-transmon systems with tunable couplers

Peng Xu, Yunlong Wang, Yuechen Mu +4 more

Hybrid superconducting architectures combining different types of qubits offer a promising platform for exploiting their complementary advantages, yet high-fidelity entangling gates remain challenging because of strong nonlinearities and residual qubit-qubit interactions. Here, we propose a high-fidelity controlled-Z (CZ) gate for a hybrid circuit comprising a fluxonium qubit, a fixed-frequency transmon qubit, and a flux-tunable transmon coupler. By modulating only the external magnetic flux applied to the coupler, the qubit-qubit interaction is dynamically engineered for conditional-phase accumulation while the residual interaction is suppressed at idle, mitigating spectator-induced errors. We employ a low-dimensional Fourier-cosine pulse parameterization and a physically motivated cost function to independently suppress conditional-phase errors and leakage from the computational subspace. Numerical simulations demonstrate that a microwave-free CZ gate can be realized within $25 \mathrm{ns}$, with an average gate fidelity exceeding $99.99\%$ and leakage below $10^{-5}$. Using experimentally relevant superconducting-qubit parameters and accounting for decoherence, the proposed scheme maintains a CZ-gate fidelity of approximately $99.9\%$. We further extend the analysis to larger coupled architectures and find that the CZ-gate infidelity remains below $10^{-4}$ in the presence of spectator qubits. These results establish single-parameter flux control as a simple and robust approach for realizing high-fidelity entangling gates in heterogeneous superconducting quantum architectures.

quant-pharXiv:2609.14197•Sep 15, 2026•0 citations

Controlled-Controlled-Phase Gates for Superconducting Qubits Mediated by a Shared Tunable Coupler

Niklas J. Glaser, Federico Roy, Stefan Filipp

Applications for noisy intermediate-scale quantum computing devices rely on the efficient entanglement of many qubits to reach a potential quantum advantage. Although entanglement is typically generated using two-qubit gates, direct control of strong multiqubit interactions can improve the efficiency of the process. Here, we investigate a system of three superconducting transmon-type qubits coupled via a single flux-tunable coupler. Tuning the frequency of the coupler by adiabatic flux pulses enables us to control the conditional energy shifts between the qubits and directly realize multiqubit interactions. To accurately adjust the resulting controlled relative phases, we describe a gate protocol involving refocusing pulses and adjustable interaction times. This enables the implementation of the full family of pairwise controlled-phase and controlled-controlled-phase gates. Numerical simulations result in fidelities around 99% and gate times below 300 ns using currently achievable system parameters and decoherence rates.

arXiv:2206.12392•Physical Review Applied•Apr 3, 2023•28 citations

Above 99.9% Fidelity Single-Qubit Gates, Two-Qubit Gates, and Readout in a Single Superconducting Quantum Device

Fabian Marxer, Jakub Mrożek, Joona Andersson +64 more

Achieving high-fidelity single-qubit gates, two-qubit gates, and qubit readout is critical for building scalable, error-corrected quantum computers. However, device parameters that enhance one operation often degrade the others, making simultaneous optimization challenging. Here, we demonstrate that careful tuning of qubit-coupler coupling strengths in a superconducting circuit with two transmon qubits coupled via a tunable coupler enables high-fidelity single- and two-qubit gates, without compromising readout performance. Furthermore, we introduce a new calibration protocol for diabatic controlled- Z gates, phased-averaged leakage error amplification (PALEA), which enables efficient suppression of coherent gate errors and leakage to noncomputational states. Using PALEA in combination with careful tuning of qubit-coupler coupling strengths, we achieve a 40 h-averaged CZ gate fidelity of 99.93 %, simultaneous single-qubit gate fidelities of 99.98 %, and readout fidelities over 99.94 % in a single device. Our results demonstrate a viable path toward scaling up superconducting quantum processors while maintaining consistently high gate and readout fidelities.

arXiv:2508.16437•PRX Quantum•Mar 26, 2026•7 citations

Optimization of two-qubit gates in tunable-coupler architectures using single-flux-quantum control

Boyan T. Torosov, Bohdan Kulchytskyy, Florian Hopfmueller +3 more

We present a gradient-based method to construct high-fidelity, two-qubit quantum gates in a system consisting of two transmon qubits coupled via a tunable coupler. In particular, we focus on single-flux-quantum pulses as a promising and scalable alternative to traditional control schemes that use microwave electronics. We develop a continuous embedding scheme to optimize these discrete pulses, taking advantage of autodifferentiation of our model. This approach allows us to achieve fSim-type gates with average gate fidelities on the order of 99.99% and controlled-$Z$ and controlled-not gates with fidelities above 99.9%. Furthermore, we provide an alternative semianalytical construction of these gates via an exact decomposition using a pair of fSim gates, which leads to the reduction in memory required to store the associated pulse sequences.

arXiv:2412.15816•Physical Review A•Jul 18, 2025•1 citation
High-fidelity two-qubit gates are essential for scalable quantum computing. We present a scheme based on superconducting transmon qubits and a control pulse delivery protocol that enables arbitrary controlled-phase gates modulated solely by an independent arbitrary waveform generator pulse. We combined a tunable coupler design with bipolar flux-pulsing to demonstrate a high-fidelity gate with a peak performance of 99.5%99.5\%99.5%. Our gates inherit the advantages of both approaches: minimal residual ZZ coupling, built-in echo-like low-frequency noise protection, and time-scale control pulse reproducibility, while remaining easy to calibrate. We optimize the system energy levels to mitigate leakage to the coupler and suppress residual interactions. Numerical simulations of the scheme as three qutrits indicate that an error below 1×10−31 \times 10^{-3}1×10−3 is achievable. We confirm the scalability potential of the proposed scheme on high-fidelity 4-qubit and 8-qubit quantum processors
Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.
Building a scalable universal high-performance quantum processor is a formidable challenge. In particular, the problem of realizing fast high-perfomance two-qubit gates of high-fidelity remains needful. Here we propose a building block for a scalable quantum processor consisting of two transmons and a tunable three-mode coupler allowing for a ZZ interaction control. We experimentally demonstrate the native CZ gate with the pulse duration of 60 ns achieving the two-qubit gate fidelity above 98%, limited mostly by qubit coherence time. Numerical simulations show that by optimizing the gate duration the fidelity can be pushed over 99.97%.
Hybrid superconducting architectures combining different types of qubits offer a promising platform for exploiting their complementary advantages, yet high-fidelity entangling gates remain challenging because of strong nonlinearities and residual qubit-qubit interactions. Here, we propose a high-fidelity controlled-Z (CZ) gate for a hybrid circuit comprising a fluxonium qubit, a fixed-frequency transmon qubit, and a flux-tunable transmon coupler. By modulating only the external magnetic flux applied to the coupler, the qubit-qubit interaction is dynamically engineered for conditional-phase accumulation while the residual interaction is suppressed at idle, mitigating spectator-induced errors. We employ a low-dimensional Fourier-cosine pulse parameterization and a physically motivated cost function to independently suppress conditional-phase errors and leakage from the computational subspace. Numerical simulations demonstrate that a microwave-free CZ gate can be realized within 25ns25 \mathrm{ns}25ns, with an average gate fidelity exceeding 99.99%99.99\%99.99% and leakage below 10−510^{-5}10−5. Using experimentally relevant superconducting-qubit parameters and accounting for decoherence, the proposed scheme maintains a CZ-gate fidelity of approximately 99.9%99.9\%99.9%. We further extend the analysis to larger coupled architectures and find that the CZ-gate infidelity remains below 10−410^{-4}10−4 in the presence of spectator qubits. These results establish single-parameter flux control as a simple and robust approach for realizing high-fidelity entangling gates in heterogeneous superconducting quantum architectures.
Applications for noisy intermediate-scale quantum computing devices rely on the efficient entanglement of many qubits to reach a potential quantum advantage. Although entanglement is typically generated using two-qubit gates, direct control of strong multiqubit interactions can improve the efficiency of the process. Here, we investigate a system of three superconducting transmon-type qubits coupled via a single flux-tunable coupler. Tuning the frequency of the coupler by adiabatic flux pulses enables us to control the conditional energy shifts between the qubits and directly realize multiqubit interactions. To accurately adjust the resulting controlled relative phases, we describe a gate protocol involving refocusing pulses and adjustable interaction times. This enables the implementation of the full family of pairwise controlled-phase and controlled-controlled-phase gates. Numerical simulations result in fidelities around 99% and gate times below 300 ns using currently achievable system parameters and decoherence rates.
Achieving high-fidelity single-qubit gates, two-qubit gates, and qubit readout is critical for building scalable, error-corrected quantum computers. However, device parameters that enhance one operation often degrade the others, making simultaneous optimization challenging. Here, we demonstrate that careful tuning of qubit-coupler coupling strengths in a superconducting circuit with two transmon qubits coupled via a tunable coupler enables high-fidelity single- and two-qubit gates, without compromising readout performance. Furthermore, we introduce a new calibration protocol for diabatic controlled- Z gates, phased-averaged leakage error amplification (PALEA), which enables efficient suppression of coherent gate errors and leakage to noncomputational states. Using PALEA in combination with careful tuning of qubit-coupler coupling strengths, we achieve a 40 h-averaged CZ gate fidelity of 99.93 %, simultaneous single-qubit gate fidelities of 99.98 %, and readout fidelities over 99.94 % in a single device. Our results demonstrate a viable path toward scaling up superconducting quantum processors while maintaining consistently high gate and readout fidelities.
We present a gradient-based method to construct high-fidelity, two-qubit quantum gates in a system consisting of two transmon qubits coupled via a tunable coupler. In particular, we focus on single-flux-quantum pulses as a promising and scalable alternative to traditional control schemes that use microwave electronics. We develop a continuous embedding scheme to optimize these discrete pulses, taking advantage of autodifferentiation of our model. This approach allows us to achieve fSim-type gates with average gate fidelities on the order of 99.99% and controlled-ZZZ and controlled-not gates with fidelities above 99.9%. Furthermore, we provide an alternative semianalytical construction of these gates via an exact decomposition using a pair of fSim gates, which leads to the reduction in memory required to store the associated pulse sequences.