Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2203.16302 · npj Quantum Information

High fidelity two-qubit gates on fluxoniums using a tunable coupler

Ilya N. Moskalenko, Ilya A. Simakov, Nikolay N. Abramov, Alexander A. Grigorev, Dmitry O. Moskalev, Anastasiya A. Pishchimova, Nikita S. Smirnov, E. V. Zikiy, Ilya A. Rodionov, Ilya S. Besedin

Published Nov 8, 2022• 116 citations
arXivHTMLPDF

Abstract

Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.

DOI
10.1038/s41534-022-00644-x

Related papers

Scalable Fluxonium Quantum Processors via Tunable-Coupler Architecture

Ze Zhan, Zishuo Li, Fei Wang +24 more

Superconducting quantum processors have largely converged on transmon-based architectures, while alternative qubit modalities with intrinsic error protection have lacked a demonstrated path to scalable system integration. In particular, although tunable-coupler-mediated interactions have been validated for small fluxonium systems, it remains unclear whether such designs can be scaled to a multi-qubit lattice. Here, we establish a scalable fluxonium processor architecture based on a modular qubit-coupler unit cell engineered to suppress residual interactions and spectator errors in a many-qubit lattice. The system enables parallel single-qubit gate fidelities approaching 99.99% and two-qubit CZ gate fidelities around 99%. With an optimized gate duration of 32 ns, the best CZ gate fidelity reaches 99.9%. We further validate this architecture in a 22-qubit processor based on the same configuration, where parallel operations enable the deterministic generation of Greenberger-Horne-Zeilinger states involving up to 10 qubits. Together, these results demonstrate that the fluxonium-tunable-coupler unit cell composes without emergent interaction pathologies and establish fluxonium as a scalable superconducting qubit platform.

quant-pharXiv:2604.13363•Apr 16, 2026•0 citations

Crosstalk in Multi-Qubit Fluxonium Architectures with Transmon Couplers

Martijn F. S. Zwanenburg, Christian Kraglund Andersen

In recent years, several architectures have been proposed for implementing two-qubit operations on fluxonium superconducting qubits. A particularly promising approach, which was demonstrated experimentally by Refs. [1,2], employs a transmon superconducting qubit as a tunable coupler between the fluxonium qubits. These experiments have shown that the transmon coupler enables fast, high-fidelity two-qubit operations while suppressing unwanted ZZ crosstalk between the fluxonium qubits. In this work, we numerically study the scalability of this architecture. We find that, when trivially scaling this architecture, crosstalk from spectator qubits limits the gate fidelity to below 90%. We show that these spectator errors can be reduced to below $10^{-4}$ by reducing the coupling strength and by dynamically tuning transmons that are not used for a two-qubit operation to an off position. We further investigate the resilience of the operation to direct capacitive coupling between the transmon couplers and to microwave crosstalk.

quant-pharXiv:2603.09870•Mar 11, 2026•0 citations

Scalable fluxonium-qubit architecture with tunable interactions between noncomputational levels

Peng Zhao, Guming Zhao, Shaowei Li +2 more

The fluxonium qubit has emerged as a promising candidate for superconducting quantum computing due to its long coherence times and high-fidelity gates. Nonetheless, further scaling up and improving performance remain critical challenges for establishing fluxoniums as a viable alternative to transmons. A key obstacle lies in developing scalable coupling architectures. In this work, we introduce a scalable fluxonium architecture that enables decoupling of qubit states while maintaining tunable couplings between non-computational states. Beyond the well-studied ZZ crosstalk, we identify that always-on interactions involving non-computational levels can significantly degrade the fidelities of initialization, control, and readout in large systems, thereby impeding scalability. Based on two possible physical realizations of the architecture, we demonstrate that the issue can be mitigated by implementing tunable couplings for fluxonium plasmon transitions, meanwhile enabling fast, high-fidelity gates with passive ZZ suppression. This comparative analysis enables us to establish general principles for realizing the architecture while understanding and addressing implementation-specific challenges.

arXiv:2504.09888•Physical Review Applied•Apr 2, 2026•2 citations

Fast CZ gate in hybrid fluxonium-transmon systems with tunable couplers

Peng Xu, Yunlong Wang, Yuechen Mu +4 more

Hybrid superconducting architectures combining different types of qubits offer a promising platform for exploiting their complementary advantages, yet high-fidelity entangling gates remain challenging because of strong nonlinearities and residual qubit-qubit interactions. Here, we propose a high-fidelity controlled-Z (CZ) gate for a hybrid circuit comprising a fluxonium qubit, a fixed-frequency transmon qubit, and a flux-tunable transmon coupler. By modulating only the external magnetic flux applied to the coupler, the qubit-qubit interaction is dynamically engineered for conditional-phase accumulation while the residual interaction is suppressed at idle, mitigating spectator-induced errors. We employ a low-dimensional Fourier-cosine pulse parameterization and a physically motivated cost function to independently suppress conditional-phase errors and leakage from the computational subspace. Numerical simulations demonstrate that a microwave-free CZ gate can be realized within $25 \mathrm{ns}$, with an average gate fidelity exceeding $99.99\%$ and leakage below $10^{-5}$. Using experimentally relevant superconducting-qubit parameters and accounting for decoherence, the proposed scheme maintains a CZ-gate fidelity of approximately $99.9\%$. We further extend the analysis to larger coupled architectures and find that the CZ-gate infidelity remains below $10^{-4}$ in the presence of spectator qubits. These results establish single-parameter flux control as a simple and robust approach for realizing high-fidelity entangling gates in heterogeneous superconducting quantum architectures.

quant-pharXiv:2609.14197•Sep 15, 2026•0 citations

High-fidelity two-qubit gates with transmon qubits using bipolar flux pulses and tunable couplers

Nikita S. Smirnov, Aleksei R. Matanin, Аnton I. Ivanov +15 more

High-fidelity two-qubit gates are essential for scalable quantum computing. We present a scheme based on superconducting transmon qubits and a control pulse delivery protocol that enables arbitrary controlled-phase gates modulated solely by an independent arbitrary waveform generator pulse. We combined a tunable coupler design with bipolar flux-pulsing to demonstrate a high-fidelity gate with a peak performance of $99.5\%$. Our gates inherit the advantages of both approaches: minimal residual ZZ coupling, built-in echo-like low-frequency noise protection, and time-scale control pulse reproducibility, while remaining easy to calibrate. We optimize the system energy levels to mitigate leakage to the coupler and suppress residual interactions. Numerical simulations of the scheme as three qutrits indicate that an error below $1 \times 10^{-3}$ is achievable. We confirm the scalability potential of the proposed scheme on high-fidelity 4-qubit and 8-qubit quantum processors

arXiv:2509.04965•Physical Review Applied•Jul 13, 2026•0 citations

Tunable coupling scheme for implementing two-qubit gates on fluxonium qubits

Ilya N. Moskalenko, Ilya S. Besedin, Ilya A. Simakov +1 more

A superconducting fluxonium circuit is an RF-superconducting quantum interference device-type flux qubit that uses a large inductance built from an array of Josephson junctions or a high kinetic inductance material. This inductance suppresses charge sensitivity exponentially and flux sensitivity quadratically. In contrast to the transmon qubit, the anharmonicity of fluxonium can be large and positive, allowing for better separation between the low energy qubit manifold of the circuit and higher-lying excited states. Here, we propose a tunable coupling scheme for implementing two-qubit gates on fixed-frequency fluxonium qubits, biased at half flux quantum. In this system, both qubits and couplers are coupled capacitively and implemented as fluxonium circuits with an additional harmonic mode. We investigate the performance of the scheme by simulating a universal two-qubit fSim gate. In the proposed approach, we rely on a planar on-chip architecture for the whole device. Our design is compatible with existing hardware for transmon-based devices with the additional advantage of lower qubit frequency facilitating high-precision gating.

arXiv:2107.11550•Applied Physics Letters•Nov 8, 2021•35 citations
Abstract Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.
Superconducting quantum processors have largely converged on transmon-based architectures, while alternative qubit modalities with intrinsic error protection have lacked a demonstrated path to scalable system integration. In particular, although tunable-coupler-mediated interactions have been validated for small fluxonium systems, it remains unclear whether such designs can be scaled to a multi-qubit lattice. Here, we establish a scalable fluxonium processor architecture based on a modular qubit-coupler unit cell engineered to suppress residual interactions and spectator errors in a many-qubit lattice. The system enables parallel single-qubit gate fidelities approaching 99.99% and two-qubit CZ gate fidelities around 99%. With an optimized gate duration of 32 ns, the best CZ gate fidelity reaches 99.9%. We further validate this architecture in a 22-qubit processor based on the same configuration, where parallel operations enable the deterministic generation of Greenberger-Horne-Zeilinger states involving up to 10 qubits. Together, these results demonstrate that the fluxonium-tunable-coupler unit cell composes without emergent interaction pathologies and establish fluxonium as a scalable superconducting qubit platform.
In recent years, several architectures have been proposed for implementing two-qubit operations on fluxonium superconducting qubits. A particularly promising approach, which was demonstrated experimentally by Refs. [1,2], employs a transmon superconducting qubit as a tunable coupler between the fluxonium qubits. These experiments have shown that the transmon coupler enables fast, high-fidelity two-qubit operations while suppressing unwanted ZZ crosstalk between the fluxonium qubits. In this work, we numerically study the scalability of this architecture. We find that, when trivially scaling this architecture, crosstalk from spectator qubits limits the gate fidelity to below 90%. We show that these spectator errors can be reduced to below 10−410^{-4}10−4 by reducing the coupling strength and by dynamically tuning transmons that are not used for a two-qubit operation to an off position. We further investigate the resilience of the operation to direct capacitive coupling between the transmon couplers and to microwave crosstalk.
The fluxonium qubit has emerged as a promising candidate for superconducting quantum computing due to its long coherence times and high-fidelity gates. Nonetheless, further scaling up and improving performance remain critical challenges for establishing fluxoniums as a viable alternative to transmons. A key obstacle lies in developing scalable coupling architectures. In this work, we introduce a scalable fluxonium architecture that enables decoupling of qubit states while maintaining tunable couplings between non-computational states. Beyond the well-studied ZZ crosstalk, we identify that always-on interactions involving non-computational levels can significantly degrade the fidelities of initialization, control, and readout in large systems, thereby impeding scalability. Based on two possible physical realizations of the architecture, we demonstrate that the issue can be mitigated by implementing tunable couplings for fluxonium plasmon transitions, meanwhile enabling fast, high-fidelity gates with passive ZZ suppression. This comparative analysis enables us to establish general principles for realizing the architecture while understanding and addressing implementation-specific challenges.
Hybrid superconducting architectures combining different types of qubits offer a promising platform for exploiting their complementary advantages, yet high-fidelity entangling gates remain challenging because of strong nonlinearities and residual qubit-qubit interactions. Here, we propose a high-fidelity controlled-Z (CZ) gate for a hybrid circuit comprising a fluxonium qubit, a fixed-frequency transmon qubit, and a flux-tunable transmon coupler. By modulating only the external magnetic flux applied to the coupler, the qubit-qubit interaction is dynamically engineered for conditional-phase accumulation while the residual interaction is suppressed at idle, mitigating spectator-induced errors. We employ a low-dimensional Fourier-cosine pulse parameterization and a physically motivated cost function to independently suppress conditional-phase errors and leakage from the computational subspace. Numerical simulations demonstrate that a microwave-free CZ gate can be realized within 25ns25 \mathrm{ns}25ns, with an average gate fidelity exceeding 99.99%99.99\%99.99% and leakage below 10−510^{-5}10−5. Using experimentally relevant superconducting-qubit parameters and accounting for decoherence, the proposed scheme maintains a CZ-gate fidelity of approximately 99.9%99.9\%99.9%. We further extend the analysis to larger coupled architectures and find that the CZ-gate infidelity remains below 10−410^{-4}10−4 in the presence of spectator qubits. These results establish single-parameter flux control as a simple and robust approach for realizing high-fidelity entangling gates in heterogeneous superconducting quantum architectures.
High-fidelity two-qubit gates are essential for scalable quantum computing. We present a scheme based on superconducting transmon qubits and a control pulse delivery protocol that enables arbitrary controlled-phase gates modulated solely by an independent arbitrary waveform generator pulse. We combined a tunable coupler design with bipolar flux-pulsing to demonstrate a high-fidelity gate with a peak performance of 99.5%99.5\%99.5%. Our gates inherit the advantages of both approaches: minimal residual ZZ coupling, built-in echo-like low-frequency noise protection, and time-scale control pulse reproducibility, while remaining easy to calibrate. We optimize the system energy levels to mitigate leakage to the coupler and suppress residual interactions. Numerical simulations of the scheme as three qutrits indicate that an error below 1×10−31 \times 10^{-3}1×10−3 is achievable. We confirm the scalability potential of the proposed scheme on high-fidelity 4-qubit and 8-qubit quantum processors
A superconducting fluxonium circuit is an RF-superconducting quantum interference device-type flux qubit that uses a large inductance built from an array of Josephson junctions or a high kinetic inductance material. This inductance suppresses charge sensitivity exponentially and flux sensitivity quadratically. In contrast to the transmon qubit, the anharmonicity of fluxonium can be large and positive, allowing for better separation between the low energy qubit manifold of the circuit and higher-lying excited states. Here, we propose a tunable coupling scheme for implementing two-qubit gates on fixed-frequency fluxonium qubits, biased at half flux quantum. In this system, both qubits and couplers are coupled capacitively and implemented as fluxonium circuits with an additional harmonic mode. We investigate the performance of the scheme by simulating a universal two-qubit fSim gate. In the proposed approach, we rely on a planar on-chip architecture for the whole device. Our design is compatible with existing hardware for transmon-based devices with the additional advantage of lower qubit frequency facilitating high-precision gating.