Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2410.15041 · Physical Review Applied

High-precision pulse calibration of tunable couplers for high-fidelity two-qubit gates in superconducting quantum processors

Tian-Ming Li, Jiachi Zhang, Bing-Jie Chen, Kaixuan Huang, Hao-Tian Liu, Yong-Xi Xiao, Cheng-Lin Deng, Gui-Han Liang, Chi-Tong Chen, Yu Liu, Hao Li, Zhen-Ting Bao, Kui Zhao, Yueshan Xu, Li Li, Yang He, Zheng-He Liu, Yi-Han Yu, Si-Yun Zhou, Yanjun Liu, Xiaohui Song, Dongning Zheng, Zhongcheng Xiang, Yun‐Hao Shi, Kai Xu, Heng Fan

Published Feb 21, 2025• 15 citations
arXivHTMLPDF

Abstract

For superconducting quantum processors, stable high-fidelity two-qubit operations depend on precise flux control of the tunable coupler. However, the pulse distortion poses a significant challenge to the control precision. Current calibration methods, which often rely on microwave crosstalk or additional readout resonators for coupler excitation and readout, tend to be cumbersome and inefficient, especially when couplers only have flux control. Here, we introduce and experimentally validate a pulse calibration scheme that exploits the strong coupling between qubits and couplers, eliminating the need for extra coupler readout and excitation. Our method directly measures the short-time and long-time step responses of the coupler flux pulse transient, enabling us to apply predistortion to subsequent signals using fast Fourier transformation and deconvolution. This approach not only simplifies the calibration process, but also significantly improves the precision and stability of the flux control. We demonstrate the efficacy of our method through the implementation of diabatic controlled-$Z$ (cz) and $i$swap gates with fidelities of $99.61\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.04\mathrm{%}$ and $99.82\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.02\mathrm{%}$, respectively, as well as a series of diabatic controlled-phase gates with high fidelities characterized by cross-entropy benchmarking. The consistency and robustness of our technique are further validated by the reduction in pulse distortion and phase error observed across multilayer cz gates. These results underscore the potential of our calibration and predistortion method to enhance the performance of two-qubit gates in superconducting quantum processors.

DOI
10.1103/physrevapplied.23.024059

Related papers

Characterization of tunable coupler without a dedicated readout resonator in superconducting circuits

Chi Zhang, Tian-Le Wang, Liang-Liang Guo +6 more

Tunable couplers have recently emerged as an essential component in superconducting quantum processors. These couplers usually do not have readout resonators to save control or hardware overhead; this makes it challenging to characterize and calibrate the coupler, which will undoubtedly limit the performance of a fast two-qubit gate. Here, we theoretically demonstrate that by mapping the coupler's state onto that of its neighboring qubit, the high-contrast readout of the coupler can be realized. We experimentally implement such a readout scheme with a single-shot readout fidelity of 86%, which is mainly limited by the thermal population of our sample. We further demonstrate how to calibrate the flux crosstalk related to the coupler and its flux distortion that are ignored in the previous works. These calibration steps are imperative for realizing robust and accurate quantum operations in frequency-tunable superconducting circuits.

Applied Physics Letters•Jan 9, 2023•11 citations

Above 99.9% Fidelity Single-Qubit Gates, Two-Qubit Gates, and Readout in a Single Superconducting Quantum Device

Fabian Marxer, Jakub Mrożek, Joona Andersson +64 more

Achieving high-fidelity single-qubit gates, two-qubit gates, and qubit readout is critical for building scalable, error-corrected quantum computers. However, device parameters that enhance one operation often degrade the others, making simultaneous optimization challenging. Here, we demonstrate that careful tuning of qubit-coupler coupling strengths in a superconducting circuit with two transmon qubits coupled via a tunable coupler enables high-fidelity single- and two-qubit gates, without compromising readout performance. Furthermore, we introduce a new calibration protocol for diabatic controlled- Z gates, phased-averaged leakage error amplification (PALEA), which enables efficient suppression of coherent gate errors and leakage to noncomputational states. Using PALEA in combination with careful tuning of qubit-coupler coupling strengths, we achieve a 40 h-averaged CZ gate fidelity of 99.93 %, simultaneous single-qubit gate fidelities of 99.98 %, and readout fidelities over 99.94 % in a single device. Our results demonstrate a viable path toward scaling up superconducting quantum processors while maintaining consistently high gate and readout fidelities.

arXiv:2508.16437•PRX Quantum•Mar 26, 2026•7 citations

Characterization and optimization of tunable couplers via adiabatic control in superconducting circuits

Xuan Zhang, Xu Zhang, C. H. Chen +6 more

In the pursuit of scalable superconducting quantum computing, tunable couplers have emerged as a pivotal component, offering the flexibility required for complex quantum operations of high performance. In most current architectures of superconducting quantum chips, such couplers are not equipped with dedicated readout circuits to reduce complexity in both design and operation. However, this strategy poses challenges in precise characterization, calibration, and control of the couplers. In this work, we develop a hardware-efficient and robust technique based on adiabatic control to address this issue. The critical ingredient of this technique is adiabatic swap operation between a tunable coupler and nearby qubits. Using this technique, we have characterized and calibrated tunable couplers in our chips and achieved straightforward and precise control over these couplers. For example, we have demonstrated the calibration and correction of the flux distortion of couplers. In addition, we have also expanded this technique to tune the dispersive shift between a frequency-fixed qubit and its readout resonator over a wide range.

arXiv:2501.13646•Physical Review Applied•Aug 6, 2025•3 citations

Digital Predistortion for Flux Control of Tunable Superconducting Qubits

Dharun Venkateswaran, Felice Francesco Tafuri, Yuanzheng Paul Tan +8 more

Flux-tunable superconducting qubits rely on fast flux control pulses to implement two-qubit entangling quantum gates, a key building block for quantum algorithms. However, distortion effects introduced by non-ideal control electronics, parasitic components, and the cryogenic quantum chip response can all degrade the gate fidelity. We present a digital predistortion (DPD) framework for characterizing and then compensating for these distortions using a combination of infinite impulse response (IIR) and finite impulse response (FIR) filters. Experiments on a flux-tunable quantum processing unit (QPU) demonstrate a successful correction of step-response distortions on the flux-control line, with a compensated control signal showing only sub-percent deviations from the ideal target linear behavior. The demonstrated method enables automated rapid calibration of flux control channels for superconducting QPUs.

quant-pharXiv:2604.15895•Apr 20, 2026•0 citations

Characterizing and mitigating flux crosstalk in superconducting qubits–couplers system

Myrron Albert Callera Aguila, N. Li, Chen-Hsun Ma +12 more

Superconducting qubits have achieved exceptional gate fidelities, exceeding the error-correction threshold in recent years. One key ingredient of such improvement is the introduction of tunable couplers to control the qubit-to-qubit coupling through frequency tuning. Moving toward fault-tolerant quantum computation, increasing the number of physical qubits is another step toward effective error correction codes. Under a multiqubit architecture, flux control (Z) lines are crucial in tuning the frequency of the qubits and couplers. However, dense flux lines result in magnetic flux crosstalk, wherein magnetic flux applied to one element inadvertently affects neighboring qubits or couplers. This crosstalk obscures the idle frequency of the qubit when flux bias is applied, which degrades gate performance and calibration accuracy. In this study, we characterize flux crosstalk and suppress it in a multiqubit-coupler chip with multi-Z lines without adding additional readout for couplers. By quantifying the mutual flux-induced frequency shifts of qubits and couplers, we construct a cancellation matrix that enables precise compensation of non-local flux, demonstrating a substantial reduction in Z-line crosstalk from 56.5‰ to 0.13‰, which is close to statistical error. Flux compensation corrects the CZ SWAP measurement, leading to a symmetric map with respect to flux bias. Compared with a crosstalk-free calculated CZ SWAP map, the measured map indicates that our approach provides a near-zero crosstalk for the coupler-transmon system. These results highlight the effectiveness of our approach in enhancing flux crosstalk-free control and supporting its potential for scaling superconducting quantum processors.

APL Quantum•Feb 18, 2026•2 citations

Coupler Microwave-Activated Controlled-Phase Gate on Fluxonium Qubits

Ilya A. Simakov, Grigoriy S. Mazhorin, Ilya N. Moskalenko +8 more

Tunable couplers have recently become one of the most powerful tools for implementing two-qubit gates between superconducting qubits.A tunable coupler typically includes a nonlinear element, such as a superconducting quantum interference device, which is used to tune the resonance frequency of an LC circuit connecting two qubits.Here we propose a complimentary approach where instead of tuning the resonance frequency of the tunable coupler by applying a quasistatic control signal, we excite by microwave the degree of freedom associated with the coupler itself.Because of strong effective longitudinal coupling between the coupler and the qubits, the frequency of this transition strongly depends on the computational state, leading to different phase accumulations in different states.Using this method, we experimentally demonstrate a controlled-Z gate of 44-ns duration on a fluxonium-based quantum processor, obtaining a fidelity of 97.6% ± 0.4% characterized by cross-entropy benchmarking.

arXiv:2302.09819•PRX Quantum•Nov 3, 2023•25 citations
For superconducting quantum processors, stable high-fidelity two-qubit operations depend on precise flux control of the tunable coupler. However, the pulse distortion poses a significant challenge to the control precision. Current calibration methods, which often rely on microwave crosstalk or additional readout resonators for coupler excitation and readout, tend to be cumbersome and inefficient, especially when couplers only have flux control. Here, we introduce and experimentally validate a pulse calibration scheme that exploits the strong coupling between qubits and couplers, eliminating the need for extra coupler readout and excitation. Our method directly measures the short-time and long-time step responses of the coupler flux pulse transient, enabling us to apply predistortion to subsequent signals using fast Fourier transformation and deconvolution. This approach not only simplifies the calibration process, but also significantly improves the precision and stability of the flux control. We demonstrate the efficacy of our method through the implementation of diabatic controlled-ZZZ (cz) and iiiswap gates with fidelities of 99.61\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.04\mathrm{%} and 99.82\mathrm{%}\ifmmode\pm\else\textpm\fi{}0.02\mathrm{%}, respectively, as well as a series of diabatic controlled-phase gates with high fidelities characterized by cross-entropy benchmarking. The consistency and robustness of our technique are further validated by the reduction in pulse distortion and phase error observed across multilayer cz gates. These results underscore the potential of our calibration and predistortion method to enhance the performance of two-qubit gates in superconducting quantum processors.
Tunable couplers have recently emerged as an essential component in superconducting quantum processors. These couplers usually do not have readout resonators to save control or hardware overhead; this makes it challenging to characterize and calibrate the coupler, which will undoubtedly limit the performance of a fast two-qubit gate. Here, we theoretically demonstrate that by mapping the coupler's state onto that of its neighboring qubit, the high-contrast readout of the coupler can be realized. We experimentally implement such a readout scheme with a single-shot readout fidelity of 86%, which is mainly limited by the thermal population of our sample. We further demonstrate how to calibrate the flux crosstalk related to the coupler and its flux distortion that are ignored in the previous works. These calibration steps are imperative for realizing robust and accurate quantum operations in frequency-tunable superconducting circuits.
Achieving high-fidelity single-qubit gates, two-qubit gates, and qubit readout is critical for building scalable, error-corrected quantum computers. However, device parameters that enhance one operation often degrade the others, making simultaneous optimization challenging. Here, we demonstrate that careful tuning of qubit-coupler coupling strengths in a superconducting circuit with two transmon qubits coupled via a tunable coupler enables high-fidelity single- and two-qubit gates, without compromising readout performance. Furthermore, we introduce a new calibration protocol for diabatic controlled- Z gates, phased-averaged leakage error amplification (PALEA), which enables efficient suppression of coherent gate errors and leakage to noncomputational states. Using PALEA in combination with careful tuning of qubit-coupler coupling strengths, we achieve a 40 h-averaged CZ gate fidelity of 99.93 %, simultaneous single-qubit gate fidelities of 99.98 %, and readout fidelities over 99.94 % in a single device. Our results demonstrate a viable path toward scaling up superconducting quantum processors while maintaining consistently high gate and readout fidelities.
In the pursuit of scalable superconducting quantum computing, tunable couplers have emerged as a pivotal component, offering the flexibility required for complex quantum operations of high performance. In most current architectures of superconducting quantum chips, such couplers are not equipped with dedicated readout circuits to reduce complexity in both design and operation. However, this strategy poses challenges in precise characterization, calibration, and control of the couplers. In this work, we develop a hardware-efficient and robust technique based on adiabatic control to address this issue. The critical ingredient of this technique is adiabatic swap operation between a tunable coupler and nearby qubits. Using this technique, we have characterized and calibrated tunable couplers in our chips and achieved straightforward and precise control over these couplers. For example, we have demonstrated the calibration and correction of the flux distortion of couplers. In addition, we have also expanded this technique to tune the dispersive shift between a frequency-fixed qubit and its readout resonator over a wide range.
Flux-tunable superconducting qubits rely on fast flux control pulses to implement two-qubit entangling quantum gates, a key building block for quantum algorithms. However, distortion effects introduced by non-ideal control electronics, parasitic components, and the cryogenic quantum chip response can all degrade the gate fidelity. We present a digital predistortion (DPD) framework for characterizing and then compensating for these distortions using a combination of infinite impulse response (IIR) and finite impulse response (FIR) filters. Experiments on a flux-tunable quantum processing unit (QPU) demonstrate a successful correction of step-response distortions on the flux-control line, with a compensated control signal showing only sub-percent deviations from the ideal target linear behavior. The demonstrated method enables automated rapid calibration of flux control channels for superconducting QPUs.
Superconducting qubits have achieved exceptional gate fidelities, exceeding the error-correction threshold in recent years. One key ingredient of such improvement is the introduction of tunable couplers to control the qubit-to-qubit coupling through frequency tuning. Moving toward fault-tolerant quantum computation, increasing the number of physical qubits is another step toward effective error correction codes. Under a multiqubit architecture, flux control (Z) lines are crucial in tuning the frequency of the qubits and couplers. However, dense flux lines result in magnetic flux crosstalk, wherein magnetic flux applied to one element inadvertently affects neighboring qubits or couplers. This crosstalk obscures the idle frequency of the qubit when flux bias is applied, which degrades gate performance and calibration accuracy. In this study, we characterize flux crosstalk and suppress it in a multiqubit-coupler chip with multi-Z lines without adding additional readout for couplers. By quantifying the mutual flux-induced frequency shifts of qubits and couplers, we construct a cancellation matrix that enables precise compensation of non-local flux, demonstrating a substantial reduction in Z-line crosstalk from 56.5‰ to 0.13‰, which is close to statistical error. Flux compensation corrects the CZ SWAP measurement, leading to a symmetric map with respect to flux bias. Compared with a crosstalk-free calculated CZ SWAP map, the measured map indicates that our approach provides a near-zero crosstalk for the coupler-transmon system. These results highlight the effectiveness of our approach in enhancing flux crosstalk-free control and supporting its potential for scaling superconducting quantum processors.
Tunable couplers have recently become one of the most powerful tools for implementing two-qubit gates between superconducting qubits.A tunable coupler typically includes a nonlinear element, such as a superconducting quantum interference device, which is used to tune the resonance frequency of an LC circuit connecting two qubits.Here we propose a complimentary approach where instead of tuning the resonance frequency of the tunable coupler by applying a quasistatic control signal, we excite by microwave the degree of freedom associated with the coupler itself.Because of strong effective longitudinal coupling between the coupler and the qubits, the frequency of this transition strongly depends on the computational state, leading to different phase accumulations in different states.Using this method, we experimentally demonstrate a controlled-Z gate of 44-ns duration on a fluxonium-based quantum processor, obtaining a fidelity of 97.6% ± 0.4% characterized by cross-entropy benchmarking.