Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2405.10483

A single atom vibration sensor

Wenxi Lai, Ma, Yu-Quan, Li, Qiaoxin

Published May 17, 2024• 0 citations
arXivHTMLPDF

Abstract

Previously in vibration sensors, optical glass plates, optical fibres, carbon nanotubes, semiconductor materials, piezoelectric materials and molecules are proved to be effective transducers for sensing vibrations. In this work, for the first time, we will propose a model of vibration sensor using single atom transport in an open optical lattice. In this apparatus, information of mechanical vibration could be transferred into shaking of optical lattice through one of a cavity mirror. Shaking lattice consequently induces Mott insulator due to quantum interference. It is found that information of vibration is encoded in the atomic current and it could be extracted by Fourier transformations. The present atomic vibration sensor has wide detection range of frequency with high precision. Our present model of sensor based on atomic system opens a new area of studying vibration sensors.

DOI
10.48550/arxiv.2405.10483

Related papers

Hybrid quantum sensing using an optomechanical resonator coupled atom interferometer

Ashwin Rajagopalan

Quantum sensing using atom interferometry possesses immense potential for application in gravimetry, inertial navigation and for gravitational wave detection, apart from carrying out tests of fundamental physics. Atom interferometry can be used to perform absolute inertial measurements with unprecedented long term stability, unlike classical sensors which are prone to drift and incur calibration errors. However, atom interferometers seldom achieve their fundamental sensitivity due to the coupling of ambient vibrations. It is the dominant noise source that not only impairs performance but also affects its operability. Ideal compensation of the effects due to vibration noise using a versatile accelerometer, while concurrently enabling miniaturized atom interferometer setups has not been pioneered. Such a compact hybrid quantum sensor will enable reliable operation with an enhanced performance in field applications, paving the way for robust atom interferometry beyond laboratory conditions. A novel optomechanical resonator has been designed, developed and successfully hybridized with an atom interferometer to suppress the effects of vibration noise, and the results are presented in this thesis. The optomechanical resonator’s inertial test mass is simultaneously used to create a continuous intracavity optical lattice to sense its displacement, and a pulsed optical lattice to manipulate the atoms. For the first time, a broadband accelerometer is seamlessly hybridized with an atom interferometer via mechanical resonator mediated coupling of the optical lattices to measure acceleration. This enables elimination of vibration induced measurement ambiguity in our atom interferometer with a well defined mechanical transfer function. Vibration noise correlation is demonstrated up to our prototype atom interferometer’s most sensitive operating mode of T = 6 ms using double Bragg diffraction, ultimately limited by its technical noise. The optomechanical resonator measures acceleration with a sensitivity down to 1.1×10−6 ms−2/ √Hz corresponding to a displacement sensitivity of 8.6 × 10−15 m/ √Hz. Substantial 1/f noise suppression due to the developed optical readout scheme enables a measurement bandwidth spanning from sub-hertz frequencies up to several kilohertz. Multiple versions of the optomechanical resonator with different characteristics were developed and hybridized with our atom interferometer. This paves the way for developing tailored optomechanical resonators for specific inertial sensing applications.

•Jan 1, 2026•0 citations

Investigation on the Effects of Microvibration on the Atomic Comagnetometer

Chang Liu, Kai Wei, Zitong Xu +5 more

Precision measurements utilizing atomic spins are widely used in fundamental physics research, inertial sensing, biomagnetism, and the generation of standard quantities. These precision measurements based on quantum sensors have long been disturbed by micro-vibration. In this work, we study the influence of micro-vibration on spin ensembles and perform the experiment on atomic comagnetometer for the first time, which is a powerful tool for search for dark matter and new force, as well as inertial navigation. The model of the effects of micro-vibration on the atomic comagnetometer is established, which considers the transfer characteristics of micro-vibration and the response characteristics of the atomic spin ensembles to the vibration. Moreover, we develop a vibration isolation system, which is a combination of air-floating passive vibration isolators and active feedback systems, to suppress the influence of micro-vibration. Based on the established model and the vibration isolator, we achieve an ultrahigh sensitive comagnetometer, which is among the most sensitive comagnetometer. This work is of wide interest in precision measurement based on quantum sensors and could pave the way for the design of combined vibration isolation systems for such experiments to further improve the sensitivity.

IEEE Transactions on Instrumentation and Measurement•Jan 1, 2023•15 citations

Ultracold atoms coupled to micro- and nanomechanical oscillators: Towards hybrid quantum systems

David Hunger, Stephan Camerer, Theodor W. Hänsch +8 more

This work investigates different coupling mechanisms between ultracold atoms and mechanical oscillators. In a first experiment, atom-surface force is used to couple the vibrations of a mechanical cantilever to the motion of a Bose-Einstein condensate in a magnetic microtrap on a chip. The atoms are trapped at sub-micrometer distance from the cantilever surface. Coupling is used to read out the cantilever vibrations with the atoms. Coupling via surface forces could be employed to couple atoms to molecular-scale oscillators such as carbon nanotubes. In a second experiment, coupling via a 1D optical lattice that is formed by a laser beam retroreflected from the cantilever tip. The optical lattice serves as a transfer rod which couples vibrations of the cantilever to the atoms and vice versa.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2009•0 citations

Vibrational dephasing in matter-wave interferometers

A Rembold, G Schütz, R Röpke +4 more

Matter-wave interferometry is a highly sensitive tool to measure small perturbations in a quantum system.This property allows the creation of precision sensors for dephasing mechanisms such as mechanical vibrations.They are a challenge for phase measurements under perturbing conditions that cannot be perfectly decoupled from the interferometer, e.g.for mobile interferometric devices or vibrations with a broad frequency range.Here, we demonstrate a method based on second-order correlation theory in combination with Fourier analysis, to use an electron interferometer as a sensor that precisely characterizes the mechanical vibration spectrum of the interferometer.Using the high spatial and temporal single-particle resolution of a delay line detector, the data allows to reveal the original contrast and spatial periodicity of the interference pattern from 'washed-out' matter-wave interferograms that have been vibrationally disturbed in the frequency region between 100 and 1000 Hz.Other than with electromagnetic dephasing, due to excitations of higher harmonics and additional frequencies induced from the environment, the parts in the setup oscillate with frequencies that can be different to the applied ones.The developed numerical search algorithm is capable to determine those unknown oscillations and corresponding amplitudes.The technique can identify vibrational dephasing and decrease damping and shielding requirements in electron, ion, neutron, atom and molecule interferometers that generate a spatial fringe pattern on the detector plane.

arXiv:1608.04966•New Journal of Physics•Feb 15, 2017•9 citations

Optomechanical inertial reference for atom interferometry

A. Rajagopalan, K. Stolzenberg, D. Thomas +5 more

Atom interferometers are among the most sensitive inertial sensors, yet deployment outside the laboratory is limited by vibration noise, conventionally mitigated by external sensors or bulky isolation. Here we demonstrate a hybrid inertial sensor which fuses an optomechanical resonator and an atom interferometer by exploiting the resonator's test mass as the interferometer's reference mirror. This allows for better correlation than with two separate sensors, whose unknown transfer function is replaced by the static response of one mechanical element. The resonator achieves a displacement sensitivity of $8.6\cdot 10^{-15}$ m/$\sqrt{\mathrm{Hz}}$ with suppressed 1/f noise and yields a minimum acceleration sensitivity of $1.1\cdot10^{-6}$ m/s$^2$/$\sqrt{\mathrm{Hz}}$ over a bandwidth extending from sub-Hertz to 2.5 kHz. Under ambient laboratory conditions the integrated system removes vibration-induced phase ambiguity for accelerations up to $50\cdot 10^{-3}$ m/s$^2$ and reaches the interferometer's technical noise limit, which a commercial force-balance accelerometer does not. Because the resonance-tracking readout is largely independent of the mechanical design, the architecture transfers directly to other precision sensing platforms.

quant-pharXiv:2608.28418•Aug 31, 2026

Noise cancellation system for shaking optical lattice by controlling optical path

Hoon Yu, Jung Bog Kim

We present a simple way to control the phase of an optical lattice by detecting the interference signal of two beams. The optical lattice is intentionally shaken by varying the relative phase of the beams. However, the lattice may also be shaken by unwanted variations of the relative optical path length, e.g., due to mirror vibrations. The purpose of the servo is to attenuate these unwanted variations while the intended shaking remains. We demonstrate that the servo changes the relative phase between beams and follows the intended shaking function with 99% accuracy. The bandwidth for the acceptable attenuation of unwanted shaking, -13 dB, is measured to 1.2 kHz to control the atomic Bloch state. The servo will be implemented to attenuate the unknown system vibrations for a shaken lattice and engineer the momentum state of atoms trapped in the lattice. This idea can also be applied to any time varying experiment.

Review of Scientific Instruments•Jun 1, 2020•2 citations
Previously in vibration sensors, optical glass plates, optical fibres, carbon nanotubes, semiconductor materials, piezoelectric materials and molecules are proved to be effective transducers for sensing vibrations. In this work, for the first time, we will propose a model of vibration sensor using single atom transport in an open optical lattice. In this apparatus, information of mechanical vibration could be transferred into shaking of optical lattice through one of a cavity mirror. Shaking lattice consequently induces Mott insulator due to quantum interference. It is found that information of vibration is encoded in the atomic current and it could be extracted by Fourier transformations. The present atomic vibration sensor has wide detection range of frequency with high precision. Our present model of sensor based on atomic system opens a new area of studying vibration sensors.
Quantum sensing using atom interferometry possesses immense potential for application in gravimetry, inertial navigation and for gravitational wave detection, apart from carrying out tests of fundamental physics. Atom interferometry can be used to perform absolute inertial measurements with unprecedented long term stability, unlike classical sensors which are prone to drift and incur calibration errors. However, atom interferometers seldom achieve their fundamental sensitivity due to the coupling of ambient vibrations. It is the dominant noise source that not only impairs performance but also affects its operability. Ideal compensation of the effects due to vibration noise using a versatile accelerometer, while concurrently enabling miniaturized atom interferometer setups has not been pioneered. Such a compact hybrid quantum sensor will enable reliable operation with an enhanced performance in field applications, paving the way for robust atom interferometry beyond laboratory conditions. A novel optomechanical resonator has been designed, developed and successfully hybridized with an atom interferometer to suppress the effects of vibration noise, and the results are presented in this thesis. The optomechanical resonator’s inertial test mass is simultaneously used to create a continuous intracavity optical lattice to sense its displacement, and a pulsed optical lattice to manipulate the atoms. For the first time, a broadband accelerometer is seamlessly hybridized with an atom interferometer via mechanical resonator mediated coupling of the optical lattices to measure acceleration. This enables elimination of vibration induced measurement ambiguity in our atom interferometer with a well defined mechanical transfer function. Vibration noise correlation is demonstrated up to our prototype atom interferometer’s most sensitive operating mode of T = 6 ms using double Bragg diffraction, ultimately limited by its technical noise. The optomechanical resonator measures acceleration with a sensitivity down to 1.1×10−6 ms−2/ √Hz corresponding to a displacement sensitivity of 8.6 × 10−15 m/ √Hz. Substantial 1/f noise suppression due to the developed optical readout scheme enables a measurement bandwidth spanning from sub-hertz frequencies up to several kilohertz. Multiple versions of the optomechanical resonator with different characteristics were developed and hybridized with our atom interferometer. This paves the way for developing tailored optomechanical resonators for specific inertial sensing applications.
Precision measurements utilizing atomic spins are widely used in fundamental physics research, inertial sensing, biomagnetism, and the generation of standard quantities. These precision measurements based on quantum sensors have long been disturbed by micro-vibration. In this work, we study the influence of micro-vibration on spin ensembles and perform the experiment on atomic comagnetometer for the first time, which is a powerful tool for search for dark matter and new force, as well as inertial navigation. The model of the effects of micro-vibration on the atomic comagnetometer is established, which considers the transfer characteristics of micro-vibration and the response characteristics of the atomic spin ensembles to the vibration. Moreover, we develop a vibration isolation system, which is a combination of air-floating passive vibration isolators and active feedback systems, to suppress the influence of micro-vibration. Based on the established model and the vibration isolator, we achieve an ultrahigh sensitive comagnetometer, which is among the most sensitive comagnetometer. This work is of wide interest in precision measurement based on quantum sensors and could pave the way for the design of combined vibration isolation systems for such experiments to further improve the sensitivity.
This work investigates different coupling mechanisms between ultracold atoms and mechanical oscillators. In a first experiment, atom-surface force is used to couple the vibrations of a mechanical cantilever to the motion of a Bose-Einstein condensate in a magnetic microtrap on a chip. The atoms are trapped at sub-micrometer distance from the cantilever surface. Coupling is used to read out the cantilever vibrations with the atoms. Coupling via surface forces could be employed to couple atoms to molecular-scale oscillators such as carbon nanotubes. In a second experiment, coupling via a 1D optical lattice that is formed by a laser beam retroreflected from the cantilever tip. The optical lattice serves as a transfer rod which couples vibrations of the cantilever to the atoms and vice versa.
Matter-wave interferometry is a highly sensitive tool to measure small perturbations in a quantum system.This property allows the creation of precision sensors for dephasing mechanisms such as mechanical vibrations.They are a challenge for phase measurements under perturbing conditions that cannot be perfectly decoupled from the interferometer, e.g.for mobile interferometric devices or vibrations with a broad frequency range.Here, we demonstrate a method based on second-order correlation theory in combination with Fourier analysis, to use an electron interferometer as a sensor that precisely characterizes the mechanical vibration spectrum of the interferometer.Using the high spatial and temporal single-particle resolution of a delay line detector, the data allows to reveal the original contrast and spatial periodicity of the interference pattern from 'washed-out' matter-wave interferograms that have been vibrationally disturbed in the frequency region between 100 and 1000 Hz.Other than with electromagnetic dephasing, due to excitations of higher harmonics and additional frequencies induced from the environment, the parts in the setup oscillate with frequencies that can be different to the applied ones.The developed numerical search algorithm is capable to determine those unknown oscillations and corresponding amplitudes.The technique can identify vibrational dephasing and decrease damping and shielding requirements in electron, ion, neutron, atom and molecule interferometers that generate a spatial fringe pattern on the detector plane.
Atom interferometers are among the most sensitive inertial sensors, yet deployment outside the laboratory is limited by vibration noise, conventionally mitigated by external sensors or bulky isolation. Here we demonstrate a hybrid inertial sensor which fuses an optomechanical resonator and an atom interferometer by exploiting the resonator's test mass as the interferometer's reference mirror. This allows for better correlation than with two separate sensors, whose unknown transfer function is replaced by the static response of one mechanical element. The resonator achieves a displacement sensitivity of 8.6⋅10−158.6\cdot 10^{-15}8.6⋅10−15 m/Hz\sqrt{\mathrm{Hz}}Hz​ with suppressed 1/f noise and yields a minimum acceleration sensitivity of 1.1⋅10−61.1\cdot10^{-6}1.1⋅10−6 m/s2^22/Hz\sqrt{\mathrm{Hz}}Hz​ over a bandwidth extending from sub-Hertz to 2.5 kHz. Under ambient laboratory conditions the integrated system removes vibration-induced phase ambiguity for accelerations up to 50⋅10−350\cdot 10^{-3}50⋅10−3 m/s2^22 and reaches the interferometer's technical noise limit, which a commercial force-balance accelerometer does not. Because the resonance-tracking readout is largely independent of the mechanical design, the architecture transfers directly to other precision sensing platforms.
We present a simple way to control the phase of an optical lattice by detecting the interference signal of two beams. The optical lattice is intentionally shaken by varying the relative phase of the beams. However, the lattice may also be shaken by unwanted variations of the relative optical path length, e.g., due to mirror vibrations. The purpose of the servo is to attenuate these unwanted variations while the intended shaking remains. We demonstrate that the servo changes the relative phase between beams and follows the intended shaking function with 99% accuracy. The bandwidth for the acceptable attenuation of unwanted shaking, -13 dB, is measured to 1.2 kHz to control the atomic Bloch state. The servo will be implemented to attenuate the unknown system vibrations for a shaken lattice and engineer the momentum state of atoms trapped in the lattice. This idea can also be applied to any time varying experiment.