Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2608.28418

Optomechanical inertial reference for atom interferometry

A. Rajagopalan, K. Stolzenberg, D. Thomas, A. Herbst, S. Abend, E. M. Rasel, F. Guzmán, D. Schlippert

quant-phphysics.atom-phphysics.opticsSubmitted Aug 28, 2026• Announced Aug 31, 2026
arXivHTMLPDF

Abstract

Atom interferometers are among the most sensitive inertial sensors, yet deployment outside the laboratory is limited by vibration noise, conventionally mitigated by external sensors or bulky isolation. Here we demonstrate a hybrid inertial sensor which fuses an optomechanical resonator and an atom interferometer by exploiting the resonator's test mass as the interferometer's reference mirror. This allows for better correlation than with two separate sensors, whose unknown transfer function is replaced by the static response of one mechanical element. The resonator achieves a displacement sensitivity of $8.6\cdot 10^{-15}$ m/$\sqrt{\mathrm{Hz}}$ with suppressed 1/f noise and yields a minimum acceleration sensitivity of $1.1\cdot10^{-6}$ m/s$^2$/$\sqrt{\mathrm{Hz}}$ over a bandwidth extending from sub-Hertz to 2.5 kHz. Under ambient laboratory conditions the integrated system removes vibration-induced phase ambiguity for accelerations up to $50\cdot 10^{-3}$ m/s$^2$ and reaches the interferometer's technical noise limit, which a commercial force-balance accelerometer does not. Because the resonance-tracking readout is largely independent of the mechanical design, the architecture transfers directly to other precision sensing platforms.

Related papers

Hybrid quantum sensing using an optomechanical resonator coupled atom interferometer

Ashwin Rajagopalan

Quantum sensing using atom interferometry possesses immense potential for application in gravimetry, inertial navigation and for gravitational wave detection, apart from carrying out tests of fundamental physics. Atom interferometry can be used to perform absolute inertial measurements with unprecedented long term stability, unlike classical sensors which are prone to drift and incur calibration errors. However, atom interferometers seldom achieve their fundamental sensitivity due to the coupling of ambient vibrations. It is the dominant noise source that not only impairs performance but also affects its operability. Ideal compensation of the effects due to vibration noise using a versatile accelerometer, while concurrently enabling miniaturized atom interferometer setups has not been pioneered. Such a compact hybrid quantum sensor will enable reliable operation with an enhanced performance in field applications, paving the way for robust atom interferometry beyond laboratory conditions. A novel optomechanical resonator has been designed, developed and successfully hybridized with an atom interferometer to suppress the effects of vibration noise, and the results are presented in this thesis. The optomechanical resonator’s inertial test mass is simultaneously used to create a continuous intracavity optical lattice to sense its displacement, and a pulsed optical lattice to manipulate the atoms. For the first time, a broadband accelerometer is seamlessly hybridized with an atom interferometer via mechanical resonator mediated coupling of the optical lattices to measure acceleration. This enables elimination of vibration induced measurement ambiguity in our atom interferometer with a well defined mechanical transfer function. Vibration noise correlation is demonstrated up to our prototype atom interferometer’s most sensitive operating mode of T = 6 ms using double Bragg diffraction, ultimately limited by its technical noise. The optomechanical resonator measures acceleration with a sensitivity down to 1.1×10−6 ms−2/ √Hz corresponding to a displacement sensitivity of 8.6 × 10−15 m/ √Hz. Substantial 1/f noise suppression due to the developed optical readout scheme enables a measurement bandwidth spanning from sub-hertz frequencies up to several kilohertz. Multiple versions of the optomechanical resonator with different characteristics were developed and hybridized with our atom interferometer. This paves the way for developing tailored optomechanical resonators for specific inertial sensing applications.

•Jan 1, 2026•0 citations

Inertial noise post-correction in atom interferometers measuring the local gravitational acceleration

L. Richardson

Exploiting the quantum nature of atoms through the use of matter-wave interferometry has lead to the development of devices sensitive to, among other things, the local gravitational acceleration. Measurements of the gravitational acceleration have applications ranging from detection of subterranean density di erences to observation of general relativistic e ects. Light-pulse atom interferometers provide an absolute measurement of the gravitational acceleration with a sensitivity competitive and even surpassing the performance of classical sensors. The advantages of atom interferometers as inertial measurement devices have lead to e orts in increasing sensitivity and decreasing the physical dimensions of the measurement head, allowing them to be more transportable for eld use applications. With increasing sensitivity, it becomes more critical to address the noise source limitations a ecting the measurement, speci cally the in uence of ground motion on measurements. Vibrations coupling into the inertial reference add a time varying phase shift uncommon to the paths of the interferometer. This limitation is especially pertinent to transportable atom gravimeters measuring in the eld where inertial noise is typically far higher than in relatively quiet laboratory environments. Within this work, implementation and demonstration of inertial noise post-correction in an atom interferometer is shown within low inertial noise environments and simulated strong motion environments. For a high pulse separation time atom interferometer (T = 78 ms) post-correction yielded an increase in the short term stability from 4.4 x 10 ̄6 m/s2/√Hz to 9.2 x 10 ̄7 m/s2/√Hz. This method was reproduced with a di erent motion sensor to perform post-correction in a high motion environment, generated by introducing additional movement onto the inertial reference. By performing post-correction in the high motion environment, we were able to show an increase of short term stability of γ = 73.8. Current limitations to the post-correction resulted from self noise resolution limitations and spectral resolutions limitations. Beyond corrections with commercially available sensors, this work demonstrates the rst post-correction with a next generation compact optomechanical sensor. This optomechanical sensor is formed from monolithic fused silica capable of sensitively measuring accelerations of a harmonic oscillator test mass, which can be read-out optically. This novel motion sensor has the advantage to any previously shown sensor used for post-correction in the capacity that it is vacuum compatible, insensitive to magnetic elds and has the potential to be implemented directly into the inertial reference. In this work, inertial noise post-correction in a simulated high motion environment is shown, correcting from a short term stability of 8 x 10 ̄3 m/s2/√Hz to 5 x 10 ̄4 m/s2/√Hz. Post-correction was limited by the parasitic cavities within the ber required for optical read-out of the harmonic oscillator displacement and intensity noise uctuations of the source laser. The results shown within this work are congruent with previous works on atom chip gravimeters, both of which help move towards portable hand-held gravimeter measurement heads capable of sensitive inertial measurement.

•Jan 1, 2019•9 citations

An atom interferometer for measuring horizontal accelerations

Jimmy Stammers

Matter-wave interferometry has enabled high precision measurements of inertial forces such as gravity and the Coriolis force. This is facilitated by the long-term stability of the physical properties of atoms and lasers. Recent experiments have demonstrated the operation of portable, robust sensors using atom interferometry. This has potential uses in the context of inertial navigation, where conventional devices suffer from long-term drifts due to bias instability. Furthermore, determining position via dead reckoning requires minimisation of dead time between measurements. This thesis presents the development of an atom interferometer for measuring horizontal accelerations. In this configuration, gravity induces motion across the laser wavefront, which constrains the tolerable level of wavefront distortions. Effective control of the experiment allows the interferometer to be operated at a rate of 4 Hz. A cold ensemble of 10^6 atoms in the same internal state is prepared in 150 ms. The interferometer operates using a sequence of three laser pulses separated by T= 25 ms to achieve sensitivity to horizontal accelerations. Combining this with a classical accelerometer provides a method of correcting for vibration-induced noise, as well as determining the interferometer fringe order. After an integration time of 40 s, the sensitivity to horizontal accelerations is better than 3^-6 m s^-2. Effects which limit this sensitivity are discussed.

•Nov 1, 2018•6 citations

Demonstration of a Robust Hybrid Classical/Quantum Accelerometer

P. Cheiney, B. Barrett, Simon Templier +5 more

We present a hybrid accelerometer that combines the large bandwidth and dynamic range of a mechanical accelerometer with the extreme stability of a quantum accelerometer based on cold atom interferometry. We describe our experimental setup and hybridization algorithm and, to assess the performances of the apparatus, we simulate a mobile environment in the laboratory by adding simultaneously vibration noise, temperature variations and laser intensity fluctuations. Even under these conditions, we are able to track the accelerometer bias to less than 1 μg. In a normal laboratory environment, our hybrid accelerometer then reaches a precision of 10 ng after 11 hours of integration. Finally, we present a novel system that compensates in real-time phase shifts due to vibrations and Doppler shifts that occur when changing the AI orientation. This allows us to operate optimally the atom interferometer in an arbitrary direction, opening the way toward truly mobile operation.

IEEE International Symposium on Inertial Sensors and Systems (INERTIAL)•Apr 1, 2019•10 citations

A three-axis quantum accelerometer for mobile sensing applications

Baptiste Battelier, P. Cheiney, B. Barrett +6 more

We present a mobile 3D accelerometer based on matter-wave interferometry, which is capable of measuring three orthogonal accelerations, each with respect to an independent inertial reference frame defined by the surface of a mirror. On each axis, we construct a hybrid quantum/classical accelerometer by using correlations between the atoms and a mechanical accelerometer attached to the back of each reference mirror. This system combines the large bandwidth and dynamic range of classical devices with the high sensitivity and accuracy of atom interferometers. By correcting each classical accelerometer independently, we are able to track the full acceleration vector with high accuracy.

•Oct 2, 2020•3 citations

Atom interferometry at arbitrary orientations and rotation rates

Quentin d’Armagnac de Castanet, Cyrille Des Cognets, Romain Arguel +6 more

The exquisite precision of atom interferometers has sparked the interest of a large community for uses ranging from fundamental physics to geodesy and inertial navigation. However, their implementation for onboard applications is still limited, not least because rotation and acceleration are intertwined in a single phase shift, which makes the extraction of a useful signal more challenging. Moreover, the spatial separation of the wave packets due to rotations leads to a loss of signal. We present an atom interferometer operating over a large range of random angles, rotation rates and accelerations. A model of the expected phase shift allows us to untangle the rotation and acceleration signals. We also implement a real-time compensation system using fiber-optic gyroscopes and a rotating reference mirror to maintain the full contrast of the interferometer. We demonstrate a single-shot sensitivity to acceleration of 24 μg for rotation rates reaching 14° s−1. Cold atoms inertial sensors offer great precision and sensitivity, yet their use in mobile applications has been hindered by the effects of rotations on their measurements. Here, authors demonstrate an atom interferometer operating over a wide range of orientations and rotation rates, thanks to hybridisation with accelerometers and gyroscopes.

arXiv:2402.18988•Nature Communications•Jul 30, 2024•32 citations
Atom interferometers are among the most sensitive inertial sensors, yet deployment outside the laboratory is limited by vibration noise, conventionally mitigated by external sensors or bulky isolation. Here we demonstrate a hybrid inertial sensor which fuses an optomechanical resonator and an atom interferometer by exploiting the resonator's test mass as the interferometer's reference mirror. This allows for better correlation than with two separate sensors, whose unknown transfer function is replaced by the static response of one mechanical element. The resonator achieves a displacement sensitivity of 8.6⋅10−158.6\cdot 10^{-15}8.6⋅10−15 m/Hz\sqrt{\mathrm{Hz}}Hz​ with suppressed 1/f noise and yields a minimum acceleration sensitivity of 1.1⋅10−61.1\cdot10^{-6}1.1⋅10−6 m/s2^22/Hz\sqrt{\mathrm{Hz}}Hz​ over a bandwidth extending from sub-Hertz to 2.5 kHz. Under ambient laboratory conditions the integrated system removes vibration-induced phase ambiguity for accelerations up to 50⋅10−350\cdot 10^{-3}50⋅10−3 m/s2^22 and reaches the interferometer's technical noise limit, which a commercial force-balance accelerometer does not. Because the resonance-tracking readout is largely independent of the mechanical design, the architecture transfers directly to other precision sensing platforms.
Quantum sensing using atom interferometry possesses immense potential for application in gravimetry, inertial navigation and for gravitational wave detection, apart from carrying out tests of fundamental physics. Atom interferometry can be used to perform absolute inertial measurements with unprecedented long term stability, unlike classical sensors which are prone to drift and incur calibration errors. However, atom interferometers seldom achieve their fundamental sensitivity due to the coupling of ambient vibrations. It is the dominant noise source that not only impairs performance but also affects its operability. Ideal compensation of the effects due to vibration noise using a versatile accelerometer, while concurrently enabling miniaturized atom interferometer setups has not been pioneered. Such a compact hybrid quantum sensor will enable reliable operation with an enhanced performance in field applications, paving the way for robust atom interferometry beyond laboratory conditions. A novel optomechanical resonator has been designed, developed and successfully hybridized with an atom interferometer to suppress the effects of vibration noise, and the results are presented in this thesis. The optomechanical resonator’s inertial test mass is simultaneously used to create a continuous intracavity optical lattice to sense its displacement, and a pulsed optical lattice to manipulate the atoms. For the first time, a broadband accelerometer is seamlessly hybridized with an atom interferometer via mechanical resonator mediated coupling of the optical lattices to measure acceleration. This enables elimination of vibration induced measurement ambiguity in our atom interferometer with a well defined mechanical transfer function. Vibration noise correlation is demonstrated up to our prototype atom interferometer’s most sensitive operating mode of T = 6 ms using double Bragg diffraction, ultimately limited by its technical noise. The optomechanical resonator measures acceleration with a sensitivity down to 1.1×10−6 ms−2/ √Hz corresponding to a displacement sensitivity of 8.6 × 10−15 m/ √Hz. Substantial 1/f noise suppression due to the developed optical readout scheme enables a measurement bandwidth spanning from sub-hertz frequencies up to several kilohertz. Multiple versions of the optomechanical resonator with different characteristics were developed and hybridized with our atom interferometer. This paves the way for developing tailored optomechanical resonators for specific inertial sensing applications.
Exploiting the quantum nature of atoms through the use of matter-wave interferometry has lead to the development of devices sensitive to, among other things, the local gravitational acceleration. Measurements of the gravitational acceleration have applications ranging from detection of subterranean density di erences to observation of general relativistic e ects. Light-pulse atom interferometers provide an absolute measurement of the gravitational acceleration with a sensitivity competitive and even surpassing the performance of classical sensors. The advantages of atom interferometers as inertial measurement devices have lead to e orts in increasing sensitivity and decreasing the physical dimensions of the measurement head, allowing them to be more transportable for eld use applications. With increasing sensitivity, it becomes more critical to address the noise source limitations a ecting the measurement, speci cally the in uence of ground motion on measurements. Vibrations coupling into the inertial reference add a time varying phase shift uncommon to the paths of the interferometer. This limitation is especially pertinent to transportable atom gravimeters measuring in the eld where inertial noise is typically far higher than in relatively quiet laboratory environments. Within this work, implementation and demonstration of inertial noise post-correction in an atom interferometer is shown within low inertial noise environments and simulated strong motion environments. For a high pulse separation time atom interferometer (T = 78 ms) post-correction yielded an increase in the short term stability from 4.4 x 10 ̄6 m/s2/√Hz to 9.2 x 10 ̄7 m/s2/√Hz. This method was reproduced with a di erent motion sensor to perform post-correction in a high motion environment, generated by introducing additional movement onto the inertial reference. By performing post-correction in the high motion environment, we were able to show an increase of short term stability of γ = 73.8. Current limitations to the post-correction resulted from self noise resolution limitations and spectral resolutions limitations. Beyond corrections with commercially available sensors, this work demonstrates the rst post-correction with a next generation compact optomechanical sensor. This optomechanical sensor is formed from monolithic fused silica capable of sensitively measuring accelerations of a harmonic oscillator test mass, which can be read-out optically. This novel motion sensor has the advantage to any previously shown sensor used for post-correction in the capacity that it is vacuum compatible, insensitive to magnetic elds and has the potential to be implemented directly into the inertial reference. In this work, inertial noise post-correction in a simulated high motion environment is shown, correcting from a short term stability of 8 x 10 ̄3 m/s2/√Hz to 5 x 10 ̄4 m/s2/√Hz. Post-correction was limited by the parasitic cavities within the ber required for optical read-out of the harmonic oscillator displacement and intensity noise uctuations of the source laser. The results shown within this work are congruent with previous works on atom chip gravimeters, both of which help move towards portable hand-held gravimeter measurement heads capable of sensitive inertial measurement.
Matter-wave interferometry has enabled high precision measurements of inertial forces such as gravity and the Coriolis force. This is facilitated by the long-term stability of the physical properties of atoms and lasers. Recent experiments have demonstrated the operation of portable, robust sensors using atom interferometry. This has potential uses in the context of inertial navigation, where conventional devices suffer from long-term drifts due to bias instability. Furthermore, determining position via dead reckoning requires minimisation of dead time between measurements. This thesis presents the development of an atom interferometer for measuring horizontal accelerations. In this configuration, gravity induces motion across the laser wavefront, which constrains the tolerable level of wavefront distortions. Effective control of the experiment allows the interferometer to be operated at a rate of 4 Hz. A cold ensemble of 10^6 atoms in the same internal state is prepared in 150 ms. The interferometer operates using a sequence of three laser pulses separated by T= 25 ms to achieve sensitivity to horizontal accelerations. Combining this with a classical accelerometer provides a method of correcting for vibration-induced noise, as well as determining the interferometer fringe order. After an integration time of 40 s, the sensitivity to horizontal accelerations is better than 3^-6 m s^-2. Effects which limit this sensitivity are discussed.
We present a hybrid accelerometer that combines the large bandwidth and dynamic range of a mechanical accelerometer with the extreme stability of a quantum accelerometer based on cold atom interferometry. We describe our experimental setup and hybridization algorithm and, to assess the performances of the apparatus, we simulate a mobile environment in the laboratory by adding simultaneously vibration noise, temperature variations and laser intensity fluctuations. Even under these conditions, we are able to track the accelerometer bias to less than 1 μg. In a normal laboratory environment, our hybrid accelerometer then reaches a precision of 10 ng after 11 hours of integration. Finally, we present a novel system that compensates in real-time phase shifts due to vibrations and Doppler shifts that occur when changing the AI orientation. This allows us to operate optimally the atom interferometer in an arbitrary direction, opening the way toward truly mobile operation.
We present a mobile 3D accelerometer based on matter-wave interferometry, which is capable of measuring three orthogonal accelerations, each with respect to an independent inertial reference frame defined by the surface of a mirror. On each axis, we construct a hybrid quantum/classical accelerometer by using correlations between the atoms and a mechanical accelerometer attached to the back of each reference mirror. This system combines the large bandwidth and dynamic range of classical devices with the high sensitivity and accuracy of atom interferometers. By correcting each classical accelerometer independently, we are able to track the full acceleration vector with high accuracy.
The exquisite precision of atom interferometers has sparked the interest of a large community for uses ranging from fundamental physics to geodesy and inertial navigation. However, their implementation for onboard applications is still limited, not least because rotation and acceleration are intertwined in a single phase shift, which makes the extraction of a useful signal more challenging. Moreover, the spatial separation of the wave packets due to rotations leads to a loss of signal. We present an atom interferometer operating over a large range of random angles, rotation rates and accelerations. A model of the expected phase shift allows us to untangle the rotation and acceleration signals. We also implement a real-time compensation system using fiber-optic gyroscopes and a rotating reference mirror to maintain the full contrast of the interferometer. We demonstrate a single-shot sensitivity to acceleration of 24 μg for rotation rates reaching 14° s−1. Cold atoms inertial sensors offer great precision and sensitivity, yet their use in mobile applications has been hindered by the effects of rotations on their measurements. Here, authors demonstrate an atom interferometer operating over a wide range of orientations and rotation rates, thanks to hybridisation with accelerometers and gyroscopes.