Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2310.06544 · npj Quantum Information

Microwave-multiplexed qubit controller using adiabatic superconductor logic

Naoki Takeuchi, Taiki Yamae, Taro Yamashita, Tsuyoshi Yamamoto, Nobuyuki Yoshikawa

Published Jun 3, 2024• 28 citations
arXivHTMLPDF

Abstract

Abstract Cryogenic qubit controllers (QCs) are the key to build large-scale superconducting quantum processors. However, developing scalable QCs is challenging because the cooling power of a dilution refrigerator is too small (~10 μW at ~10 mK) to operate conventional logic families, such as complementary metal-oxide-semiconductor logic and superconducting single-flux-quantum logic, near qubits. Here we report on a scalable QC using an ultra-low-power superconductor logic family, namely adiabatic quantum-flux-parametron (AQFP) logic. The AQFP-based QC, referred to as the AQFP-multiplexed QC (AQFP-mux QC), produces multi-tone microwave signals for qubit control with an extremely small power dissipation of 81.8 pW per qubit. Furthermore, the AQFP-mux QC adopts microwave multiplexing to reduce the number of coaxial cables for operating the entire system. As a proof of concept, we demonstrate an AQFP-mux QC chip that produces microwave signals at two output ports through microwave multiplexing and demultiplexing. Experimental results show an output power of approximately −80 dBm and on/off ratio of ~40 dB at each output port. Basic mixing operation is also demonstrated by observing sideband signals.

DOI
10.1038/s41534-024-00849-2

Related papers

Ultralow-power coherent qubit control using AQFP logic at millikelvin temperatures

Hiroto Mukai, Akiyoshi Tomonaga, Rui Wang +5 more

Qubit controllers are essential for scaling superconducting quantum processors, but implementing them at the 10 mK stage of a dilution refrigerator remains challenging due to stringent cooling constraints. Here we report an ultralow-power qubit controller using adiabatic quantum-flux-parametron (AQFP) logic, termed an AQFP-multiplexed qubit controller with virtual Z gates (AQFP QC-VZ). The AQFP QC-VZ generates multi-tone microwave pulses for qubit control with an ultralow power dissipation of 111 pW per qubit. By combining microwave and time-division multiplexing, the AQFP QC-VZ enables parallel application of X and virtual Z gates to multiple qubits using only a few control lines from room temperature. We demonstrate coherent single-qubit gates at the 10 mK stage using an AQFP mixer, a core component of the AQFP QC-VZ, without observable degradation in coherence.

quant-pharXiv:2603.27231•Mar 31, 2026•0 citations

Scalable flux controllers using adiabatic superconductor logic for quantum processors

Naoki Takeuchi, Taiki Yamae, Wenhui Luo +3 more

Quantum processors have the potential to accelerate specific computing tasks but are difficult to scale up due to engineering limitations, such as the number of available cables and cooling power for dilution refrigerators for quantum bits (qubits). Hence, it is very important to develop scalable, energy-efficient interface circuits that can control many qubits via a few control lines inside a dilution refrigerator. One of the most important interface circuits is the flux controller (FC), which generates arbitrary dc flux bias to adjust the characteristics of component devices such as qubits. In this paper, we propose and demonstrate FCs using an energy-efficient superconductor logic family, adiabatic quantum-flux-parametron (AQFP) logic. We develop two types of FCs: the AQFP FC and the AQFP/single-flux-quantum (AQFP/SFQ) FC. Both FCs require only a few control lines and have extremely small power dissipation, thus exhibiting high scalability. Furthermore, the AQFP/SFQ FC can control flux bias using ballistic SFQ transmission, which is crucial for integration with qubits. As a proof of concept, we demonstrate AQFP and AQFP/SFQ FCs at 4.2 K, fabricated by the AIST high-speed standard process. Our results indicate that AQFP logic is highly suitable for use as qubit interface circuits for very large-scale quantum processors, especially from the viewpoint of the control line count, power dissipation, and amount of supply currents.

Physical Review Research•Feb 27, 2023•21 citations

Superconductor modulation circuits for Qubit control at microwave frequencies

Sasan Razmkhah, Ali Bozbey, Pascal Febvre

Readout and control of qubits are limiting factors in scaling quantum computers. An ideal solution is to integrate energy-efficient cryogenic circuits close to the qubits to perform control and pre-processing tasks. With orders of magnitude lower power consumption and hence lower noise, Single Flux Quantum (SFQ) and Adiabatic Quantum Flux Parametron (AQFP) superconductor logic families can reach ultimate performance at cryogenic temperatures. We have created a superconductor-based on-chip function generator to control qubits. The generated signal is modulated up to tens of GHz based on the external input waveform applied to the superconductor mixer stage. This circuit works at 4.2K. A radiofrequency (RF) matching circuit transmits the signal to the ~mK stage after digital amplification and noise reduction.

arXiv:2211.06667•Nov 12, 2022•3 citations

Cryogenic Multiplexing Control Chip for Superconducting Quantum Processor

Rutian Huang, Xiao Geng, Xinyu Wu +4 more

This paper proposes a scheme and design of cryogenic multiplexing control chip (MCC) which enables one microwave cable to control many superconducting qubits. Designed based on adjustable inductor, MCC is a non-reciprocal device which generates microwave signals between 4 and 8 GHz and constructs XY control circuit to operate qubits. The effects of filters, isolators, power splitters, qubits and load impedance on MCC are analyzed in the frequency-domain simulation. And in time-domain simulation, the response time, Gaussian pulses, single-sideband, amplitude and frequency compensation of MCC are examined. The MCC can be integrated with the superconducting qubits on the same package at 20 mK temperature stage, and output specific microwave pulses used to drive the superconducting qubits without crosstalks. The MCC can greatly reduce the number of microwave control lines and is beneficial to the development of large-scale superconducting quantum processor.

quant-pharXiv:2610.19599•Physical Review Applied•Oct 15, 2026•15 citations

Control Circuits for Superconducting Qubits:

Naoki Takeuchi, Hiroshi Fuketa, Taro YAMASHITA +1 more

To build large-scale superconducting quantum computers, it is crucial to develop cryogenic qubit controllers that can manipulate many qubits inside a dilution refrigerator. In this paper, we report the recent progress and challenges of qubit controllers. Specifically, we review various qubit controllers composed of cryogenic complementary metal-oxide-semiconductor (cryo-CMOS) logic and superconductor logic (such as single-flux-quantum logic and adiabatic quantum-flux-parametron logic). A detailed comparison of the qubit controllers reveals the advantages and disadvantages of each controller and indicates future challenges for both cryo-CMOS and superconductor logic-based controllers.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Mar 19, 2024•0 citations

Integrated digital system solution for superconducting quantum computing based on mK-generated single flux quantum pulse patterns for multi-qubit control

Thomas Ortlepp, Anna Reinhardt, Taghrid Haddad +1 more

Quantum technologies are today regarded as one of the key technologies with huge implications to technological, economic and social developments in the next decades. Among the different platforms, superconducting implementations represent one of the most promising and are therefore pursued by several research institutions but also by numerous high-tech companies. Current research focusses e.g. on scaling towards a large number of qubits needed for practical implementations of this technology. Amongst the various realizations, adiabatic quantum flux parametron (AQFP) circuits have shown lowest power dissipation reaching Landauer limit. The operation of AQFP circuits down to mK temperature has been recently demonstrated. We will present a new concept for a digital control circuit based on the microwave pulse patters generated by single flux quantum circuits operating at mK temperatures. We discuss the circuit operation and the integration together with superconducting qubits to a compact and scalable approach for multi-Qubit control by digital pulse patterns.

Quantum Computing, Communication, and Simulation•Mar 5, 2026•0 citations
Abstract Cryogenic qubit controllers (QCs) are the key to build large-scale superconducting quantum processors. However, developing scalable QCs is challenging because the cooling power of a dilution refrigerator is too small (~10 μW at ~10 mK) to operate conventional logic families, such as complementary metal-oxide-semiconductor logic and superconducting single-flux-quantum logic, near qubits. Here we report on a scalable QC using an ultra-low-power superconductor logic family, namely adiabatic quantum-flux-parametron (AQFP) logic. The AQFP-based QC, referred to as the AQFP-multiplexed QC (AQFP-mux QC), produces multi-tone microwave signals for qubit control with an extremely small power dissipation of 81.8 pW per qubit. Furthermore, the AQFP-mux QC adopts microwave multiplexing to reduce the number of coaxial cables for operating the entire system. As a proof of concept, we demonstrate an AQFP-mux QC chip that produces microwave signals at two output ports through microwave multiplexing and demultiplexing. Experimental results show an output power of approximately −80 dBm and on/off ratio of ~40 dB at each output port. Basic mixing operation is also demonstrated by observing sideband signals.
Qubit controllers are essential for scaling superconducting quantum processors, but implementing them at the 10 mK stage of a dilution refrigerator remains challenging due to stringent cooling constraints. Here we report an ultralow-power qubit controller using adiabatic quantum-flux-parametron (AQFP) logic, termed an AQFP-multiplexed qubit controller with virtual Z gates (AQFP QC-VZ). The AQFP QC-VZ generates multi-tone microwave pulses for qubit control with an ultralow power dissipation of 111 pW per qubit. By combining microwave and time-division multiplexing, the AQFP QC-VZ enables parallel application of X and virtual Z gates to multiple qubits using only a few control lines from room temperature. We demonstrate coherent single-qubit gates at the 10 mK stage using an AQFP mixer, a core component of the AQFP QC-VZ, without observable degradation in coherence.
Quantum processors have the potential to accelerate specific computing tasks but are difficult to scale up due to engineering limitations, such as the number of available cables and cooling power for dilution refrigerators for quantum bits (qubits). Hence, it is very important to develop scalable, energy-efficient interface circuits that can control many qubits via a few control lines inside a dilution refrigerator. One of the most important interface circuits is the flux controller (FC), which generates arbitrary dc flux bias to adjust the characteristics of component devices such as qubits. In this paper, we propose and demonstrate FCs using an energy-efficient superconductor logic family, adiabatic quantum-flux-parametron (AQFP) logic. We develop two types of FCs: the AQFP FC and the AQFP/single-flux-quantum (AQFP/SFQ) FC. Both FCs require only a few control lines and have extremely small power dissipation, thus exhibiting high scalability. Furthermore, the AQFP/SFQ FC can control flux bias using ballistic SFQ transmission, which is crucial for integration with qubits. As a proof of concept, we demonstrate AQFP and AQFP/SFQ FCs at 4.2 K, fabricated by the AIST high-speed standard process. Our results indicate that AQFP logic is highly suitable for use as qubit interface circuits for very large-scale quantum processors, especially from the viewpoint of the control line count, power dissipation, and amount of supply currents.
Readout and control of qubits are limiting factors in scaling quantum computers. An ideal solution is to integrate energy-efficient cryogenic circuits close to the qubits to perform control and pre-processing tasks. With orders of magnitude lower power consumption and hence lower noise, Single Flux Quantum (SFQ) and Adiabatic Quantum Flux Parametron (AQFP) superconductor logic families can reach ultimate performance at cryogenic temperatures. We have created a superconductor-based on-chip function generator to control qubits. The generated signal is modulated up to tens of GHz based on the external input waveform applied to the superconductor mixer stage. This circuit works at 4.2K. A radiofrequency (RF) matching circuit transmits the signal to the ~mK stage after digital amplification and noise reduction.
This paper proposes a scheme and design of cryogenic multiplexing control chip (MCC) which enables one microwave cable to control many superconducting qubits. Designed based on adjustable inductor, MCC is a non-reciprocal device which generates microwave signals between 4 and 8 GHz and constructs XY control circuit to operate qubits. The effects of filters, isolators, power splitters, qubits and load impedance on MCC are analyzed in the frequency-domain simulation. And in time-domain simulation, the response time, Gaussian pulses, single-sideband, amplitude and frequency compensation of MCC are examined. The MCC can be integrated with the superconducting qubits on the same package at 20 mK temperature stage, and output specific microwave pulses used to drive the superconducting qubits without crosstalks. The MCC can greatly reduce the number of microwave control lines and is beneficial to the development of large-scale superconducting quantum processor.
To build large-scale superconducting quantum computers, it is crucial to develop cryogenic qubit controllers that can manipulate many qubits inside a dilution refrigerator. In this paper, we report the recent progress and challenges of qubit controllers. Specifically, we review various qubit controllers composed of cryogenic complementary metal-oxide-semiconductor (cryo-CMOS) logic and superconductor logic (such as single-flux-quantum logic and adiabatic quantum-flux-parametron logic). A detailed comparison of the qubit controllers reveals the advantages and disadvantages of each controller and indicates future challenges for both cryo-CMOS and superconductor logic-based controllers.
Quantum technologies are today regarded as one of the key technologies with huge implications to technological, economic and social developments in the next decades. Among the different platforms, superconducting implementations represent one of the most promising and are therefore pursued by several research institutions but also by numerous high-tech companies. Current research focusses e.g. on scaling towards a large number of qubits needed for practical implementations of this technology. Amongst the various realizations, adiabatic quantum flux parametron (AQFP) circuits have shown lowest power dissipation reaching Landauer limit. The operation of AQFP circuits down to mK temperature has been recently demonstrated. We will present a new concept for a digital control circuit based on the microwave pulse patters generated by single flux quantum circuits operating at mK temperatures. We discuss the circuit operation and the integration together with superconducting qubits to a compact and scalable approach for multi-Qubit control by digital pulse patterns.