Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2206.14334 · Physical Review Applied

Precision Measurement of the Microwave Dielectric Loss of Sapphire in the Quantum Regime with Parts-per-Billion Sensitivity

Alexander P. Read, Benjamin J. Chapman, Chan U Lei, Jacob C. Curtis, Suhas Ganjam, Lev Krayzman, Luigi Frunzio, Robert J. Schoelkopf

Published Mar 20, 2023• 58 citations
arXivHTMLPDF

Abstract

To better understand decoherence in superconducting qubits, the authors develop a technique to measure the loss tangent of dielectric substrates and predict the impact of dielectric loss on qubit lifetimes. This is done with no need to fabricate planar devices; the technique is independent of material platform. Measurements of sapphire in a demonstration of the approach suggest that coherence of superconducting qubits on a common form of sapphire is limited significantly by bulk dielectric loss. The same technique also shows that another form of sapphire would substantially mitigate this bulk dielectric loss and prolong qubit coherence.

DOI
10.1103/physrevapplied.19.034064

Related papers

Measurement of the Low-Temperature Loss Tangent of High-Resistivity Silicon Using a High- Q Superconducting Resonator

Mattia Checchin, D. Frolov, Andrei Lunin +2 more

Even though silicon is widely used in superconducting quantum processors as the substrate upon which qubits are fabricated, the effect of silicon on the performance of the qubits is not fully understood. Using ultrahigh-quality microwave cavities to measure dielectric loss with parts-per-billion precision, the authors clearly show that using silicon is detrimental to qubit coherence time. The loss tangent found here is an order of magnitude worse than previously measured. This study sheds light on the physical mechanisms behind dissipation in silicon, and highlights the need for further work to fully understand the origin of these losses, and how to mitigate them.

Physical Review Applied•Sep 7, 2022•33 citations

Titanium Nitride Film on Sapphire Substrate with Low Dielectric Loss for Superconducting Qubits

Hao Deng, Zhijun Song, Ran Gao +19 more

Dielectric loss is one of the major decoherence sources of superconducting qubits. Contemporary high-coherence superconducting qubits are formed by material systems mostly consisting of superconducting films on substrate with low dielectric loss, where the loss mainly originates from the surfaces and interfaces. Among the multiple candidates for material systems, a combination of titanium nitride ($\mathrm{Ti}\mathrm{N}$) film and sapphire substrate has good potential because of its chemical stability against oxidization and its high quality at interfaces. In this work, we report a $\mathrm{Ti}\mathrm{N}$ film deposited onto sapphire substrate achieving low dielectric loss at the material interface. Through the systematic characterizations of a series of transmon qubits fabricated with identical batches of $\mathrm{Ti}\mathrm{N}$ base layers but different geometries of qubit shunting capacitors with various participation ratios of the material interface, we quantitatively extract the loss-tangent value at the substrate-metal interface, which is smaller than $8.9\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}4}$ in a 1-nm disordered layer, and a limiting quality factor of about 7.3 million. By optimizing the interface participation ratio of the two-dimensional (2D) transmon qubit, we reproducibly achieve a quality factor of 5.7 million on average. The best 2D qubits show lifetimes of up to $300\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{s}$ and quality factors achieving 8.1 million. We demonstrate that $\mathrm{Ti}\mathrm{N}$ film on sapphire substrate is an ideal material system for high-coherence superconducting qubits. Our analyses further suggest that the interface dielectric loss around the Josephson-junction part of the circuit could be the dominant limitation of lifetimes for state-of-the-art transmon qubits.

arXiv:2205.03528•Physical Review Applied•Feb 6, 2023•76 citations

Measurement Techniques for Superconducting Microwave Resonators Towards Quantum Device Applications

Corey Rae McRae

Superconducting qubits, though promising for both near-term problem-solving as well as the development of large-scale quantum computing systems, are limited in performance largely by materials-induced decoherence channels which are maximized at millikelvin temperatures, single photon powers, and microwave frequencies. Superconducting microwave resonators are ideal tools for measuring these materials losses due to their simplicity, well-understood behavior, and sensitivity to these same losses. In order to better understand and mitigate dominant qubit decoherence channels, accurate and precise characterization of superconducting microwave resonator performance is critical. In this paper, current measurement techniques for superconducting microwave resonators are discussed, including experimental set-up, error analysis, and cryogenic calibration of a vector network analyzer.

IEEE MTT-S International Microwave Symposium digest•Jun 19, 2022•3 citations

Impact of absorption due to zero-field splitting on loss in dielectrics: A case study in sapphire

Mark E. Turiansky, Chris G. Van de Walle

The coherence times of superconducting qubits are limited by loss mechanisms, whose microscopic origins have remained elusive. We propose a mechanism caused by transitions between zero-field-split states of paramagnetic impurities or defects. We derive the absorption cross section for a magnetic dipole transition and apply it to calculate the loss tangent. For Cr, Fe, and V impurities in sapphire, we find loss tangents at 4.5 GHz in the range of 10$^{-9}$-10$^{-8}$, comparable to the loss measured in experiments. This value suggests that magnetic loss may be a limiting factor in the coherence times of superconducting qubits.

arXiv:2504.04610•Physical review. B./Physical review. B•Jan 2, 2026•0 citations

TLS loss in superconducting resonators on epitaxial hBN thin films

J. Christiansen-Salameh, D. J. Temples, R. Linehan +21 more

The integration of low-loss dielectrics into superconducting circuits is of importance to the functionality of quantum computers and sensors. In this work, we fabricate and measure niobium resonators atop few-layer, epitaxial hexagonal boron nitride (hBN) grown by Molecular Beam Epitaxy on a sapphire substrate and compare against a control counterpart without hBN. We conduct radiofrequency measurements which probe the responses to power, temperature, and temporal fluctuations of two-level systems. The resonators integrating hBN maintain low dielectric loss with a low-power internal loss tangent on the order of $10^{-6}$, and demonstrate hBN can be added to the conventional superconducting qubit stack with minimal degradation of the quality factor. This research represents a first step towards a materials-driven strategy to eliminate phonon-mediated correlated errors in solid-state quantum systems, which leverages the thermal properties of 2D materials to prevent athermal phonons excited in the device substrate from transmitting across the superconductor-substrate interface. The same technique applied to quantum sensors would maximize phonon collection by blocking phonons from entering passive metal films.

quant-pharXiv:2610.12556•Oct 12, 2026•0 citations

Decoherence in Josephson Qubits from Dielectric Loss

John M. Martinis, Ken B. Cooper, R. McDermott +8 more

Dielectric loss from two-level states is shown to be a dominant decoherence source in superconducting quantum bits. Depending on the qubit design, dielectric loss from insulating materials or the tunnel junction can lead to short coherence times. We show that a variety of microwave and qubit measurements are well modeled by loss from resonant absorption of two-level defects. Our results demonstrate that this loss can be significantly reduced by using better dielectrics and fabricating junctions of small area . With a redesigned phase qubit employing low-loss dielectrics, the energy relaxation rate has been improved by a factor of 20, opening up the possibility of multiqubit gates and algorithms.

arXiv:cond-mat/0507622•Physical Review Letters•Nov 16, 2005•870 citations
To better understand decoherence in superconducting qubits, the authors develop a technique to measure the loss tangent of dielectric substrates and predict the impact of dielectric loss on qubit lifetimes. This is done with no need to fabricate planar devices; the technique is independent of material platform. Measurements of sapphire in a demonstration of the approach suggest that coherence of superconducting qubits on a common form of sapphire is limited significantly by bulk dielectric loss. The same technique also shows that another form of sapphire would substantially mitigate this bulk dielectric loss and prolong qubit coherence.
Even though silicon is widely used in superconducting quantum processors as the substrate upon which qubits are fabricated, the effect of silicon on the performance of the qubits is not fully understood. Using ultrahigh-quality microwave cavities to measure dielectric loss with parts-per-billion precision, the authors clearly show that using silicon is detrimental to qubit coherence time. The loss tangent found here is an order of magnitude worse than previously measured. This study sheds light on the physical mechanisms behind dissipation in silicon, and highlights the need for further work to fully understand the origin of these losses, and how to mitigate them.
Dielectric loss is one of the major decoherence sources of superconducting qubits. Contemporary high-coherence superconducting qubits are formed by material systems mostly consisting of superconducting films on substrate with low dielectric loss, where the loss mainly originates from the surfaces and interfaces. Among the multiple candidates for material systems, a combination of titanium nitride (TiN\mathrm{Ti}\mathrm{N}TiN) film and sapphire substrate has good potential because of its chemical stability against oxidization and its high quality at interfaces. In this work, we report a TiN\mathrm{Ti}\mathrm{N}TiN film deposited onto sapphire substrate achieving low dielectric loss at the material interface. Through the systematic characterizations of a series of transmon qubits fabricated with identical batches of TiN\mathrm{Ti}\mathrm{N}TiN base layers but different geometries of qubit shunting capacitors with various participation ratios of the material interface, we quantitatively extract the loss-tangent value at the substrate-metal interface, which is smaller than $8.9\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}4}$ in a 1-nm disordered layer, and a limiting quality factor of about 7.3 million. By optimizing the interface participation ratio of the two-dimensional (2D) transmon qubit, we reproducibly achieve a quality factor of 5.7 million on average. The best 2D qubits show lifetimes of up to $300\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{s}$ and quality factors achieving 8.1 million. We demonstrate that TiN\mathrm{Ti}\mathrm{N}TiN film on sapphire substrate is an ideal material system for high-coherence superconducting qubits. Our analyses further suggest that the interface dielectric loss around the Josephson-junction part of the circuit could be the dominant limitation of lifetimes for state-of-the-art transmon qubits.
Superconducting qubits, though promising for both near-term problem-solving as well as the development of large-scale quantum computing systems, are limited in performance largely by materials-induced decoherence channels which are maximized at millikelvin temperatures, single photon powers, and microwave frequencies. Superconducting microwave resonators are ideal tools for measuring these materials losses due to their simplicity, well-understood behavior, and sensitivity to these same losses. In order to better understand and mitigate dominant qubit decoherence channels, accurate and precise characterization of superconducting microwave resonator performance is critical. In this paper, current measurement techniques for superconducting microwave resonators are discussed, including experimental set-up, error analysis, and cryogenic calibration of a vector network analyzer.
The coherence times of superconducting qubits are limited by loss mechanisms, whose microscopic origins have remained elusive. We propose a mechanism caused by transitions between zero-field-split states of paramagnetic impurities or defects. We derive the absorption cross section for a magnetic dipole transition and apply it to calculate the loss tangent. For Cr, Fe, and V impurities in sapphire, we find loss tangents at 4.5 GHz in the range of 10−9^{-9}−9-10−8^{-8}−8, comparable to the loss measured in experiments. This value suggests that magnetic loss may be a limiting factor in the coherence times of superconducting qubits.
The integration of low-loss dielectrics into superconducting circuits is of importance to the functionality of quantum computers and sensors. In this work, we fabricate and measure niobium resonators atop few-layer, epitaxial hexagonal boron nitride (hBN) grown by Molecular Beam Epitaxy on a sapphire substrate and compare against a control counterpart without hBN. We conduct radiofrequency measurements which probe the responses to power, temperature, and temporal fluctuations of two-level systems. The resonators integrating hBN maintain low dielectric loss with a low-power internal loss tangent on the order of 10−610^{-6}10−6, and demonstrate hBN can be added to the conventional superconducting qubit stack with minimal degradation of the quality factor. This research represents a first step towards a materials-driven strategy to eliminate phonon-mediated correlated errors in solid-state quantum systems, which leverages the thermal properties of 2D materials to prevent athermal phonons excited in the device substrate from transmitting across the superconductor-substrate interface. The same technique applied to quantum sensors would maximize phonon collection by blocking phonons from entering passive metal films.
Dielectric loss from two-level states is shown to be a dominant decoherence source in superconducting quantum bits. Depending on the qubit design, dielectric loss from insulating materials or the tunnel junction can lead to short coherence times. We show that a variety of microwave and qubit measurements are well modeled by loss from resonant absorption of two-level defects. Our results demonstrate that this loss can be significantly reduced by using better dielectrics and fabricating junctions of small area . With a redesigned phase qubit employing low-loss dielectrics, the energy relaxation rate has been improved by a factor of 20, opening up the possibility of multiqubit gates and algorithms.